Sklápací náves

STAS 51,8 m³ Voll- ALU- Mulde, 5,95 to. LG, Kombikl.

* Wabco EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Disc brakes
* Brake pad wear indicator (not connected)
* Tire pressure monitoring system (Wabco Trailerpulse)
* Wabco Smart-Board
* 3 x 9 t SAF axles
* Air suspension with lifting and lowering function (automatic lowering during tipping – can be locked manually via Smart-Board or via chassis-mounted switch)
* 1st and 3rd axles are automatic lift axles, controlled by the EBS-E system
* Hill-start aid is activated via a button in the truck – no installation required on the truck – or by pressing the brake pedal three times
* Aluminum air reservoirs
* Weweler crank landing gear
* Side underrun protection
* Folding rear underrun guard with handle
* 2 x 7-pin and 1 x 15-pin sockets
* Aspöck LED lighting
* 2 LED reversing lights (controlled by reverse gear)
* One LED work light at each side in the area of the landing gear
* Speedline Diamond aluminum rims
* Left side: one plastic toolbox approx. 860 x 520 x 500 mm
Cedpfowgg Uzjx Adqjhd
* Air gun with 16 m hose reel inside the toolbox
* Enclosed plastic single mudguards
* 1 dust sack with mounting bracket on right side
* 3 m aluminum access ladder stowed on right above mudguards
* Shovel and broom holder on left above mudguards
* Load pressure gauge mounted at the front of the chassis
* Aluminum chassis frame
* Aluminum tipper body – rectangular – with smooth side walls
* Hyva hydraulic cylinder, 250 bar
* Straight 4 mm aluminum front wall
* Entry steps mounted inside the body on the front wall, left side
* Smooth inner and outer side walls
* Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inner, 2 mm outer wall
* Sidewall profiles are continuously welded inside, 90° corners by means of right-angled profile between floor and side walls – allowing maximum use of floor width
* Top rail 90 mm wide
* 6 mm wear-resistant aluminum floor, 110 Brinell quality
* Combo double rear doors – straight design with double hinges and reinforcement profiles, each with one grain hatch and all-around rubber seal
* When doors are open, they are secured with chains to lay as flat as possible against the side walls
* Fourfold lower door locking hooks are opened automatically during tipping – can be locked pneumatically via valve on the frame
* Roll tarp – in RAL 9005 deep black – with three lateral tension straps
* Trapezoidal tarpaulin support, 150 mm high, on front wall and tailgate
* Access ladder and standing platform mounted at the front of the frame
* Load volume 51.8 m³
* Body and chassis painted with acrylic lacquer in RAL 9005 deep black
* --Gross technical weight of 39,000 kg possible--
* Coupling height 1,150 mm
* New vehicle without initial registration with manufacturer’s warranty
* Subject to errors and prior sale
* Available immediately from Egestorf

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.