Sklápací náves

SCHMITZ CARGOBULL SKI24 elek. Verdeck Miete, Kauf, Mietkauf 625EUR

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 636 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 300 mm, objem nakladacieho priestoru: 60 m³, Chassis manufactured using self-supporting ALU (aluminium) construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregate chassis made of ALUMINIUM with a frame height of 140 mm! (max. 39 tonnes). Axles and Suspension "Disc brakes 22.5": 3 x 9 tonne Jost axle units with DC air suspension, raising and lowering, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with starting aid (without tractor unit equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco Trailerpulse tyre pressure monitoring with ZF rim-mounted sensors. Tyres and Wheels: 6 wheels with tyres size 385/65 R 22.5, manufacturer’s choice. Alcoa aluminium rims DuraBright 11.75x22.5 ET 120. King pin bolted into a 10 mm thick plate. Landing Legs: aluminium drop legs, 2 x 10 t load capacity, for air suspension we use swivel feet. Brake System: according to E.G. standard, two-line brake system, Wabco EBS electronic braking system with RSS (Roll Stability Support), spring-loaded brake system acting on two axles, operated at the rear, aluminium air reservoir system, premium modulator. Electrical System: according to the German Road Traffic Licensing Regulations (StVZO) with 2 LED five-chamber lights (Aspöck Europoint LED) integrated into the aluminium rear panel, 24-volt system with 1x 5-pin and 2x 7-pin socket, with side LED marker lights, 2 separate LED work lights at the rear, 2 LED work lights from the 1st support leg height, 1 internal LED work light at the front left, operated from outside. Fsdpsfakkcjfx Acpogc Body/Tipping Body "Fully welded interior construction": Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn Aluminium tipper body, side walls made of 30 mm thick ALU plank profiles (2-3 mm), fully welded, 600 mm wide, with lower and upper flange, plank profiles fully welded on the inside, floor designed as a moving floor system fitted on 140 mm ALU cross members, floor load approx. 7 t/m², tightly spaced cross members (approx. 350 mm), ALU headboard with 600 mm plank profile 2-3 mm thick, straight design, special slanted ALU corner profiles, smooth straight rear wall with 2 ALU swing doors 50/30 mm thick, 4 vertical locking rods in welded ALU rear frame fitted with Teflon and stainless steel bearings, movable ALU wall hanging on the reinforced ALU upper flange with Kevlar cover for complete emptying, side brush sealing and additional side Kevlar cover, integrated discharge funnel with folding cover plate at rear left, externally operated, viewing window rear left, one sample slide per rear door (total 2), service door front left. Hydraulic system: "Cargo Floor" moving floor system integrated in the floor with hydraulically operated ALU profiles on ALU square tubes with around 670 PE-HD slide shoes, floor thickness approx. 6 mm, hydraulic stroke approx. 200 mm, fixed connections at the headboard, separate possibility for connecting hydraulic lines under the vehicle with fixed connections, pipe size NW 21, fixed connections with size and design yet to be specified, operating pressure 190–240 bar max., aluminium end pieces welded into floor, electric operation rear left with cable remote control in a lockable waterproof box. Accessories: PVC mudguards with rubber mud flaps, aluminium spare wheel holder, side ALU underrun protection, folding type, 1 tool box approx. 800x460x430 mm, plastic, approx.

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 535 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 650 mm, objem nakladacieho priestoru: 93 m³, Chassis Design with continuous, reinforced chassis, newly constructed superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength. Crossmembers, 140 mm high, reinforced version (for high floor loads). Additional reinforcement as gusset plate in the front lower chord/vehicle frame area. Chassis made of galvanized steel up to the support structure (semitrailer construction max. 39,000 kg). Axles and Suspension "Disc Brake 22.5" Jost (DCA) axle assemblies, 3 x 9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard Info Center, electronic brake pad wear indicator readable in the tractor unit (display), first axle with starting aid (per new EC regulations, without tractor unit equipment), (optionally, the first and third axles can be lifted). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 by manufacturer choice (Br-Go-Co) on 11.75x22.5 ET 120 silver steel rims. Landing Legs Mechanical landing gear with two speeds, 2 x 20 t support load with swing foot. Brake System According to E.G. standard: EBS electronic system - Wabco with RSS (Roll Stability Support) and premium modulator. Spring-actuated parking brake on two axles, operated from the rear, aluminum air reservoir installation. Electrical System According to EC standards 91/633 and 97/28, with 2 five-chamber Aspöck Europoint 3 taillights integrated in the aluminum rear end, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lamps, 2 reflective rear panels, front position lamps 2 x white, rear 2 x red, 2 separate LED reversing lights integrated in the underrun protection. Body / Tipping Body "Body fully welded inside" Fgjdpfxegcw Rme Acpsc Reinforced sidewalls: front wall load 17,250 dkn, side and rear walls 13,400/10,400 dkn. Aluminum tipping body, sidewalls made of 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom chords. Plank profiles fully welded inside. Floor designed as a moving floor system on 140 mm ALU crossmembers, with forklift load approx. 9 t/m²; crossmembers closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, straight design. Special ALU corner profiles in beveled design. Smooth rear wall in straight design with 2 ALU swing doors, 50/30 mm thick, with 2 locking rods in welded ALU rear frame with Teflon and stainless steel bearings, doors secured when open by chain on each side. Hard wear plates on the sidewalls approx. 2,000 x 1,500 x 4 mm, fully welded. Moving bulkhead with Kevlar tarp approx. 1,800 mm length plus side Kevlar tarp sealing. Service door in front wall with inward folding ladder. Hydraulics "Cargo Floor" Moving Floor System Moving floor system in the bottom with hydraulically moved ALU profiles on ALU box sections with approx. 880 PE-HD sliding pads plus anti-lifting slide bearings. Type CF 10 mm floor version, hydraulics with approx. 200 mm stroke, fixed halves on the front wall, separate connection under the vehicle for hydraulic line with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190 – max. 240 bar, ALU end pieces welded in the moving floor. Electric control at rear left with radio control integrated in a lockable, waterproof box, no hydraulic hoses included. Accessories 6 PVC mudguards with 2 anti-spray mudflaps, 6 PVC splash plates above the wheels, ALU spare wheel holder, side ALU underrun protection.

Stav: nový, Funkcionalita: plne funkčný, celková hmotnosť: 39 000 kg, veľkosť pneumatiky: 385/65R22.5, Výbava: ABS, 🇬🇧 MENCI SEMI-TRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 mm (length) x 2,000 mm (height) Floor: 6 mm Rear floor: 8 mm Unladen weight: 6,650 kg Gross Vehicle Weight: 39,000 kg Description – Version and Accessories - 3rd SAF STEERING AXLE WITH DISC BRAKE Ø 430 (ET120) 2/2 - 1st LIFTING AXLE WITH AUTOMATIC LIFT - CRAMARO ELECTRIC TARPAULIN, TYPE C (2023), HERMETIC WITH COVER - STAINLESS STEEL TOOLBOX 90x50x50 cm - TOOLBOX 90x50x25 cm - COMPLETE ADR KIT + CLASS A & R PLATES - PRESSURE GAUGE - ELECTRIC MOTOR VIBRATOR WITH REMOTE CONTROL FOR BODY - PROMETEON TYRES 385/65 R 22.5 - STEEL RIMS 385/65 R 22.5 OFFSET 0/120 - REMOTE CONTROL FOR CRAMARO TARPAULIN - ADDITIONAL REAR LED SPOTLIGHT - HUB PAINTING - FULL LED REAR LIGHTING - TPMS (Tyre Pressure Monitoring System) - Hub colour: RED RAL 3020; Tarpaulin colour: BLUE RAL 5002 - Tarpaulin with arch height H=300 - ADR-certified tarpaulin - 3 ACCESS STEPS – ANTI-WEAR CORNER PLATES Chassis in steel and body in alloy Standard Configuration: - Steel chassis - Pneumatic suspension with manual height adjustment valve - Jost landing legs with oscillating curved base - Brake system with EBS 2S/2C and load-sensing valve - Electrical system compliant with ADR regulations - Aluminium air tanks, rapid pneumatic suspension dump device - Tipping system via 5-stage front telescopic cylinder - Pneumatic parking brake - Descent safety valve, twin-action hydraulic system with gate valve - Front ladder and removable ladder above mudguards - 2 holes for towing at rear bumper hinge area FINANCING OR CUSTOM LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL – NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. – EBOLI (SA) BRANCH OFFICIAL DEALERSHIP: MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, MAXUS CONTACTS: +39 0823 1686306 +39 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30–19:00 | SATURDAY 8:30–14:00 Fodpfevzh T Aex Acpjgc WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat, Hyundai, Daf, Mercedes-Benz, Renault, Peugeot, Iveco, Mitsubishi, Scania (S-Way, S500, V8, 650, 580, 730, etc.), Stralis, MAN, Nissan V8, Intarder, 770s, Limited Edition, 660 S, Semi-trailer, Refrigerated Tank Trailer, Lamberet, Schmitz, Isuzu, Fixed-bed Truck, Crane Truck, Tipper, 4-axle, T-Way, 540–460 HP, X-Way, Three-way Tipper, V8, Scania Frost Edition, Curtain Sider, Box Truck, Tail-Lift Truck, Refrigerated Cell, Insulated w/Fridge, Van. Domenico Truck Srl declines any responsibility for potential discrepancies in technical specifications, options, or features, which may in some cases differ from those stated in the description. We invite you to verify the specifications of the individual vehicle.

Stav: nový, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Ihneď k odberu!!! Nové vozidlo / viackrát dostupné Prenájom od 890,-- € bez DPH, leasing možný od 590,-- € bez DPH) Fjdpfxjuf Ikde Acpsgc Pevné veko bez sklzu Elektrická posuvná plachta Cramaro Hmotnostne optimalizovaný rám podvozka v novom dizajne Hydraulický systém 150-250 bar Kotúčové brzdy Automatické zníženie korby pri vyklápaní Asistent rozjazdu v teréne Ďalšie napínacie uzávery LED svetelná sústava s dvojitými okrúhlymi 3K svetlami Manometer tlaku nakladania TrailerConnect Systém kontroly tlaku v pneumatikách Zdvihateľná náprava Pohotovostná hmotnosť 6150 kg Stojné nohy pre plné zaťaženie možnosť prenájmu, kúpy alebo leasingu Fullservisný prenájom od 890 € bez DPH mesačne (cenová hladina závisí od doby prenájmu). Všetky informácie na vyžiadanie. Príklad leasingu: 590 € bez DPH mesačne pri dobe trvania 48 mesiacov, mimoriadna platba 7 500 € bez DPH a záverečná splátka 5 000 € bez DPH. Všetky ceny sú bez DPH, pričom platí podmienka schválenia bonity. Prenájom možný s alebo bez fullservisu. Nemecký náves nový model hydraulika 150-250 bar zdvíhacia náprava elektrické prekrytie kotúčové brzdy plná záruka pohotovostná hmotnosť 6150 kg 2 podperné nohy pre plné zaťaženie mnoho doplnkov...

Stav: použitý, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 37 650 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2018, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: oranžová, Rok výroby: 2018, prevádzková hmotnosť: 10 350 kg, Výbava: ABS,

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2014, dĺžka ložného priestoru: 9 900 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 2 250 mm, objem nakladacieho priestoru: 55 m³, celková šírka: 2 500 mm, Rok výroby: 2014, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS Fedpfx Ajxt R U Njcpjgc - Posuvná strecha = Ďalšie informácie = Aplikačný materiál: Obilie Hrubá hmotnosť: 5.950 kg Užitočné zaťaženie: 30.050 kg CELKOVÁ HMOTNOSŤ: 36.000 kg Predajná cena: € 18.500, US$ 21.550

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 9 000 kg, dovolené zaťaženie nápravy (náprava 2): 9 000 kg, povolené zaťaženie nápravy (náprava 3): 9 000 kg, prvá registrácia: 08/2014, celková dĺžka: 9 100 mm, celková šírka: 2 550 mm, celková výška: 3 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65R22.5, farba: sivý, Rok výroby: 2014, Výbava: ABS, = Ďalšie možnosti a vybavenie = - Hliníkové disky - Vzduchové odpruženie - Kotúčové brzdy - Náradie v boxe = Poznámky = KEMPF SKM 35/3 Sklápací náves Izolovaný 2014 BPW nápravy Zdvihacia náprava Alcoas (hliníkové disky) Náradie v boxe Nemecký náves Číslo podvozku: WKY3S0035EM029050 EXPORTNÉ SLUŽBY Fgsdpjx U D Hdofx Acpoc ————— • Rakúske tranzitné povolenie/poznávacie značky s poistením na 21 dní • Doprava do akéhokoľvek prístavu v Holandsku a Belgicku • Kamiónová doprava s návesom Ceny za exportné služby nie sú zahrnuté v ponukovej cene. Pre viac informácií nás neváhajte kontaktovať. Z nesprávnych údajov v inzeráte nie je možné uplatňovať žiadne nároky. GEERTS Trucks & Trailers sa vždy snaží zabezpečiť správnosť všetkých údajov. = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 385/65R22.5 Brzdy: Kotúčové brzdy Odpruženie: Vzduchové odpruženie Zadná náprava 1: Hliníkové disky; Zdvihacia náprava; Max. zaťaženie nápravy: 9000 kg; Profil pneu vľavo: 60 %; vpravo: 60 % Zadná náprava 2: Hliníkové disky; Max. zaťaženie nápravy: 9000 kg; Profil pneu vľavo: 40 %; vpravo: 40 % Zadná náprava 3: Hliníkové disky; Max. zaťaženie nápravy: 9000 kg; Profil pneu vľavo: 40 %; vpravo: 40 % Hmotnosti Pohotovostná hmotnosť: 5 260 kg Nosnosť: 29 740 kg Celková hmotnosť: 35 000 kg Funkčné vlastnosti Sklápač: zadný Stav Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Ďalšie informácie Pre viac informácií kontaktujte Oliviera Geertsa alebo Edwina Geertsa.

Stav: nový, maximálna hmotnosť nákladu: 28 900 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 184 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 722 mm, Rok výroby: 2025, Výbava: ABS, Superstructure * Docking funnel 8" at the rear, above the tank, lockable with manual slide gate * Direct-idle outlet at the rear side * Automatic pump shut-off * Central lubrication system by Lincoln for optimal time-based lubrication of slewing rings and axles (for drum brake 36P) * Holder with two wheel chocks Pump * Vogelsang pump, capacity 6,000 L/min Axles * VALX axles with drum brakes, 9 tonnes, offset 0 Brakes * WABCO EBS brake system * WABCO tire pressure monitoring system according to R141 * TPMS system Axles ? Forced-steered axles Tire size * 385/65 R22.5, 9 t Fodpfx Asxmudnjcpegc Tires * Brand: APOLLO Lighting * 24-volt lighting system * Synchronized side marker lamps * Work lights left and right at the first axle * Two LED work lights at the rear (one left, one right, mounted on the hose racks) * Two 7-pin sockets and standard 15-pin socket Accessories * Ball valves for complete emptying of the tank * Stainless steel venting container Paintwork * Tank painted in RAL 7030 Stone Grey * Chassis painted in RAL 7016 Anthracite Grey