Müller-Mitteltal Príves S Nakladačom Skip kúpiť použité (61 529)

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: Ibsdpsxf Skvofx Aprea * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: ----Brzdy: * Wabco EBS (elektronický brzdový systém) * Nouzové odpuštění pružinových válců * Bubnové brzdy ----Nápravy: * 2x 7t Gigant nápravy ----Odpružení: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažná oje / přípojný čep: * Tažná oje výškově stavitelná o 300 mm s přípojným čepem 40 mm / přírubou ----Elektroinstalace / Osvětlení: * 15pólová zástrčka * LED koncová světla 12/24 V * Monitorování tlaku v pneumatikách s možností zobrazení v nákladním voze přes signál EBS (není nutná instalace na vozidle) ----Obecné příslušenství: * Jost mechanický opěrný naviják vpředu * Vzadu 2 mechanické sklopné stabilizační nohy * Plastová sada nářadí cca 750 x 350 x 300 mm vpředu na pravé straně podvozku * Šroubovaný podjezdový ochranný rám * Plastové čtvrtkové blatníky Ibodpfsx Hm Rcox Aprsa ----Sklápěcí nástavba: * Síťové háky v ložiskách centrálního uzamčení a 2 kusy na čelní stěně * Ocelová paletová 3stranná sklápěcí nástavba s vyztuženými Strong bočnicemi (spojité horní bočnice s vnitřním trubkovým vyztužením, bez středových sloupků, sklopné s plynovým tlumičem) * Šroubované zadní sloupky * Kombinovaná ocelová křídlová zadní stěna, dvoukřídlová, asymetricky dělená, otočná o 270° a aretovatelná (nelze sklopit), s přídavným kyvným rámem pro automatické otevření zadní stěny při sklápění, zamykání přes pozinkovaný otočný uzávěr a centrální zamykání, deaktivace automatické funkce zadní stěny při sklápění dozadu s otevřenými křídlovými dveřmi * 4 mm plechová podlaha z jemnozrné oceli ----Zajištění nákladu: * V rozích vždy 1x 5t upevňovací oko * Po stranách vždy 4x 3t zapuštěných upevňovacích ok v vnějším rámu ----Podvozek: * Podvozek z jemnozrné oceli ----Rámpy: * Vzadumountovaná kolejnice pro najížděcí rampy * 1 pár hliníkových najížděcích ramp cca 3570 x 410 mm (nosnost 10 t/pár) vhodné pro gumová i pásová vozidla * Uzamykatelný úložný prostor pod ložnou plochou v rámu podvozku pro rampy ----Pneumatiky: * Pneumatiky 358/55 R 19,5 ----Lakování: * Tažná oje, podjezdový ochranný rám, zadní sloupek, zadní sklopné nohy žárově zinkované * Nápravy, pružiny, vzduchojemy a opěrný naviják lakovány černě * Bočnice lakovány v požadovaném odstínu RAL (bez speciálního nebo metalického laku), barvu lze změnit do cca 6 týdnů před dokončením ----Informace: * Zesílená nástavba s certifikátem o zajištění nákladu * Změny a omyly vyhrazeny, mezitímní prodej možný * Ilustrační fotografie ----Dodací lhůta: * K dispozici ihned od 29. týdne 2026

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: ----Braking system: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights, 12/24 V * Tire pressure monitoring system with display capability in the truck via EBS signal - no truck-side installation required - ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right side on the chassis * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks at central locking bearings and 2 on the front wall * Steel pallet – 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal pipe reinforcement, no centre stanchions), fold-down with drop side spring lifter * Rear stanchions bolted * Combination steel wing door rear panel, 2-leaf, asymmetrically split, swivels and locks up to 270°, not fold-down, with additional pendulum frame for automatic rear wall opening during tipping, locking by galvanized rotating bar catch at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with wing door open * 4 mm fine-grained steel floor plate ----Load Securing: * 1 x 5 ton lashing point in each corner * 4 x 3 ton recessed lashing rings on each side in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting rail for access ramps * 1 pair aluminium access ramps approx. 3,570 x 410 mm (load capacity 10 tons/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment underneath the loading surface, recessed in the chassis for the ramps ----Tyres: * Tyres 358/55 R 19.5 Isdpfjx Hm Riox Apreba ----Paintwork: * Drawbar, underrun protection, rear stanchions, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Side panel paintwork in a RAL colour of choice (no special or metallic paintwork). Can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Subject to error and prior sale * Sample images ----Delivery Time: * Available immediately from CW 29/2026

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system Isdpfxel Thymj Aproba ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: ----Brzda: * Brzdový systém EBS * Bubnová brzda * Núdzové odistenie pružinových valcov ----Náprava: * Náprava BPW ----Pruženie: * Parabolické pružiny ----Ťažné oko/Ťažná tyč: * Ťažná tyč s 40 mm skrutkovacím ťažným okom (výškovo nastaviteľné mm) ----Elektrika/Osvetlenie: * 15-pólová elektrická zásuvka * LED osvetlenie * Blikajúce LED bočné obrysové svetlá * Systém monitorovania tlaku v pneumatikách RDÜ ----Všeobecné prídavné diely: * Predná podpera * Zadné štvorcové trubkové podpery podporované pružinou s základovou doskou, bezpečnostné zaisťovacie čapy pre rôzne výšky podpery * Uzavreté blatníky z oceľového plechu s ochranou proti striekajúcej vode * Uzavretý bočný ochranný panel využiteľný ako reklamná plocha * Plastová náradieová skrinka s vloženým dnom (vodorovná montáž) cca 500 x 350 x 400 mm ----Nadstavba: * Výkyvná konštrukcia na navijak káblov, svetlá vzdialenosť medzi ramenami bubna 1 700 mm s upínacím uzáverom na zaistenie bubna na koncoch ramien a aretáciou konštrukcie k rámu vozidla pomocou stredového pazúrového zámku * Motor-hydraulický pohon bubna s olejovým motorom * Ventily a posuvné hnacie valčeky s gumovým povrchom * Hydraulický regulátor rýchlosti a brzda pre pohon bubna * Oceľová hriadeľ bubna s priemerom 76 mm so strediacimi a otočnými koncami * 1 pár centrovacích kužeľov z polyamidu so stupňovitým vyhotovením ----Rám podvozka: Ibedpfou I Iqrjx Aprja * Rám podvozka z torzne tuhých štvorcových rúrok a priečnych nosníkov ----Čerpacia jednotka: * Hydraulická čerpacia jednotka s benzínovým motorom Loncin vrátane ručného a elektrického štartéra * Palivová nádrž a ručný štartér * 13 HP so zubovým čerpadlom (150 bar) ----Pneumatiky: * 315/80 R 22,5 ----Pohotovostná hmotnosť: * 2 690 kg pohotovostná hmotnosť ----Lak: * Vozidlo je žiarovo pozinkované ----Informácie: * Nové vozidlo s plnou zárukou výrobcu * Chyby a medzipredaj vyhradené ----Dodacia lehota: * K dispozícii približne od 41. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid Ibodpfsykx Nqsx Aproa

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders Ibjdpfx Ajwh Hdxeprsa * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Iedpfx Ajx Nlkajprjba * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raising and lowering system ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side- * 15-pin power socket * 2 additional LED reverse lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side * 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per support: 6,000 kg * No drive or drum brake * Support arm with tension lock for securing the drum axle * 76 mm diameter steel drum axle, centred, with rotating ends * 2 locating rings * 2 polyamide centring cones * 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised * Axles painted in black

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles Ibodpopk D I Ajfx Aprea ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 6 810 kg, celková hmotnosť: 9 600 kg, konfigurácia náprav: 1 náprava, dĺžka ložného priestoru: 4 030 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * EK 9,6 ----Brzda: * EBS (elektronický brzdový systém) * Núdzové uvoľnenie pružinových valcov Ibjdpew Ndr Uefx Aprsa * Bubnová brzda ----Náprava: * SAF náprava ----Odpruženie: * Parabolické pružiny ----Ťažné zariadenie / Okno na ťažné zariadenie: * Ťažné zariadenie ako stredná oj s 40 mm skrutkovacím ťažným okom * Plynule nastaviteľná výška ťažného zariadenia pomocou vretenového zdvihacieho prvku namiesto pevného ťažného zariadenia ----Výška spojenia: * Štandardná spojovacia výška približne 900 mm (+/- 150 mm) ----Elektrika / Osvetlenie: * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v LKW cez EBS signál – bez inštalácie na strane LKW * 15-pólová elektrická zástrčka * LED zadné svetlá * Blikajúce bočné obrysové svetlá ----Všeobecné príslušenstvo: * Predný podperný zdvihák * Uzavreté plastové blatníky * Sklopná ochrana proti podbehnutiu pre cestné finišery ----Podvozok: * Podvozok z jemnozrnnej ocele ----Sklopná korba: * Paletový 3-stranný sklápač * 700 mm oceľová predná stena * Hliníkové bočné steny asymetrické – priebežné bez stredového stĺpika – sklopné s dlhodobejšími západkami, ako aj kyvné cez manuálne centrálne zamykanie * Oceľová zadná stena vysoká 800 mm a automatické otváranie zadnej steny pri vyklápaní dozadu * 4 mm podlaha z ocele Hardox 450 ----Zabezpečenie nákladu: * Na každej strane 2 páry 3 t sklopných upínacích ok, zapustených v oceľovej podlahe ----Lak: * Podvozok, ťažné zariadenie, ochrana proti podbehnutiu žiarovo zinkované * Lakovanie sklopnej korby v požadovanom odtieni RAL (ale žiadne špeciálne alebo metalické lakovanie), možná zmena do cca 6 týždňov pred dokončením ----Informácie: * Nové vozidlo s výrobnou zárukou * Zmeny a predaj vyhradený, chyby vyhradené ----Dodacia lehota: * dostupné približne od 42. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) Isdpfer Dpz Aox Aproba * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (axle lock for maneuvering controlled by PIN 10 of the 15-pin connector—only for maneuvering, not for public road use, without truck-side installation) * SmartBoard control box as information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded height 900 mm, adjustable on head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign kit, front and rear * Toolboxes made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm, mounted on the right side * Hydraulic flow divider * Continuous side walls (without center posts) up to the approach slope * Rear stanchions foldable * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at rear of vehicle (operated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood floor * 400 mm steel front wall, slotted in * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t drop lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings along each side * Various holes in front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm, mechanically adjustable width * 4-section hydraulic control block for optional retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical support legs, ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing gear painted black * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reverse lights (activated via reverse gear) * LED lighting ----General Equipment: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix exterior frame, bent at 45°, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lateral lashing rings per side * 5 pockets per side for tube stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum Mounts: * 3 galvanised drum supports, secured via container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross-connection * Max. drum weight per cable drum support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms to secure the drum on the customer side against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: Ijdpox Nlkgsfx Aprsba * Chassis, turntable, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrading to 30 t gross weight technically possible * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available as of approx. week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 410 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, objem nakladacieho priestoru: 11 m³, Rok výroby: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck display via EBS signal – without truck-side installation * 2 x 9 t Gigant axles * Air suspension with level control during tipping operations * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear, front * Folding galvanized steel underrun protection for paver loading * Closed individual plastic mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel 3-way tipper body (side walls with MM profile – continuous without center stanchion – pendulum-mounted via manual central locking and left side drop-down with side wall spring assist) * Sliding tarpaulin similar to RAL 7038 agate grey with tensioning by lateral tensioning ratchets and tensioning cords at the front and rear * Front wall platform made of grating with access step at the drawbar and handrail on the front wall * Rear wall – made of HBW 400 steel – pendulum-mounted via automatic dual claw lock * 5 mm steel floor made of HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated into the steel floor * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * Side wall painting in any desired RAL color (except for special or metallic finishes), changeable up to approx. 6 weeks prior to completion Ibjdpfxjxl Nkgo Aprea * Axles, air tanks, landing gear, flange towing eye painted in a shade of black * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 19 800 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2019, Výbava: ABS, * Müller Mitteltal 3-nápravový príves pre abroll kontajnery * Typ TM 2 24 Iedpfx Apsyx R Enersba * Pre dva abroll kontajnery od 7 do 10 m³ * Zaistenie nákladu len dvoma reťazami na každý kontajner * Dvojitá pneumatika 265/70 R19,5 * Vzduchové odpruženie * Nápravy BPW * Otočný oje pneumaticky sklopiteľné s pneumatickým odistením * 8 UVV kotviacich ôk 5t na upevnenie upínacích prvkov * 8 preklápateľných dorazov kontajnerov na bočné centrovanie * EBS * Technicky prípustná celková hmotnosť 27 000 kg

Stav: použitý, pohotovostná hmotnosť: 4 500 kg, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2015, ďalšia kontrola (TÜV): 07/2025, dĺžka ložného priestoru: 4 800 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 1 000 mm, farba: modrá, Rok výroby: 2015, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * Nemecký príves * Stav podľa fotografií * Müller-Mitteltal trojstranný sklápací príves, typ KA-TA-R 18,0 Tandem * Rozmery sklápanej korby: 4 800 x 2 400 x 1 000 mm * Rolovacia plachta * Vzduchové odpruženie * Kotúčové brzdy * Podesta * Podpera Jost * Nosnosť 13 500 kg V prípade záujmu o novú technickú kontrolu (TÜV) Vám radi pripravíme ponuku od našich partnerských servisov. Naša ponuka je VŽDY BEZ novej technickej kontroly (TÜV), bez novej DGUV, bez novej SP a bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej webovej stránke. Hovoríme týmito jazykmi: nemecky, anglicky, poľsky, turecky. Upozornenie: Ibsdjwz H Nbopfx Aprea Dôrazne odporúčame a ponúkame možnosť obhliadky a kontroly tovaru, aby nevznikli nesprávne predstavy o stave a vhodnosti produktu. Obhliadky a kontroly sú možné kedykoľvek po dohode a sú výslovne žiadané. Všetky informácie sú bez záruky. Za chyby alebo omyly v ponuke nepreberáme zodpovednosť. Kupujúci je povinný sa osobne presvedčiť o stave a výbave tovaru / vozidiel. Zmeny, medzipredaj a omyly vyhradené.

Stav: použitý, maximálna hmotnosť nákladu: 10 080 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2017, ďalšia kontrola (TÜV): 08/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, objem nakladacieho priestoru: 6 m³, Rok výroby: 2017, Výbava: ABS, Skladové číslo: 5820 Müller-Mitteltal 3-stranný oceľový tandemový sklápací príves / hliníkové nájazdy / pozinkované šasi / široké pneumatiky! ---- * Výrobca: Müller-Mitteltal * Typ: KA-TA-R 13,5 * Prvá registrácia: 08/2017 * Celková hmotnosť: 13 500 kg * Prevádzková hmotnosť podľa osvedčenia: 3 420 kg * Nosnosť: 10 080 kg * Nápravy: 2x Gigant / bubnové brzdy * Odpruženie: listové pružiny * Pneumatiky: 385/55 R 19.5, cca 50% na oceľových diskoch * STK platná do: 08/2026 * EBS * Farba: šasi pozinkované, sklápacia nadstavba modrá * Vnútorný priestor sklápacieho korby: cca 6m³ (5,00 m dĺžka x 2,42 m šírka x 0,50 m výška) * Výsuvné hliníkové nájazdy * Ťažné oko 50 mm, výškovo nastaviteľné * Sklápacia nadstavba so 4 pármi výklopných úchytných ôk v podlahe * Predná podpera pre plné zaťaženie * Dodatočné zadné podpery (sklopné) * Nerezový úložný box vpredu vpravo * Štvrtinové blatníky * Certifikát na zabezpečenie nákladu * Prvý majiteľ Nemecký príves!! Nemecké doklady!! 1. majiteľ!! Poznámka k možným chybám v inzercii: Napriek starostlivému spracovaniu inzerátu sa môžu v texte alebo údajoch ojedinele vyskytnúť chyby. Nezodpovedáme za omyly, zmeny alebo medzipredaje. Všetky informácie sú bez záruky. Prosím, kontaktujte nás za účelom overenia údajov alebo zodpovedania ďalších otázok. Isdpfjzdm S Ssx Aprjba

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, celková šírka: 2 550 mm, Rok výroby: 2023, Müller Mitteltal KA-TA-R 11.9 tandem three-way tipper with numerous extras. Gross weight: 11,900 kg Payload (standard): approx. 8,750 kg Internal dimensions: 5,000 x 2,420 x 500 mm Tyres: 385/55R19.5 Four-layer paint finish, single colour Wheels: silver Chassis/side protection: hot-dip galvanized Platform body with front wall: hot-dip galvanized Axles/springs/air tanks, etc.: black Side and rear walls: RAL 2011 deep orange Reinforced and certified body according to EN 12642 XL, including load securing certificate (only in combination with 500 mm high steel sideboards). Rear stanchions bolted, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN, recessed at the front. Net hooks integrated on both sides and rear into the central lock mounts of the main sideboard, plus two additional hooks on the front wall. BPW axles instead of GIANT Tipping platform with fixed front wall in hot-dip galvanized design, with bolted, galvanized rear stanchions, without further coating (not applicable for HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially in large floor panels; complaints related to this are excluded from warranty. Tyres 385/55R19.5 instead of 235/75R17.5 (ground and coupling height + approx. 110 mm, code 08.940 ramp length of 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), position: right side of chassis frame, in direction of travel. 1 pair of aluminium loading ramps without running channels (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg each. Two-step access, in front of the front wall, left-hand side in direction of travel (hot-dip galvanized). Connecting cables extended for agricultural and forestry towing vehicles. Further information New: No Iedevy Tvtopfx Apreba

Stav: použitý, maximálna hmotnosť nákladu: 7 100 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2007, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Vozidlo / Nadstavba: Tandemový trojstranný sklápací vozík Prvá registrácia: 07/07 Celková hmotnosť: 10.000 kg Prevádzková hmotnosť: 2.900 kg Užitočné zaťaženie: 7.100 kg Celková dĺžka: 6.900 mm Dĺžka ložnej plochy: 5.000 mm Šírka: 2.550 mm / Šírka ložnej plochy cca 2.450 mm Výška ložnej plochy: cca 1.100 mm Ďalšie informácie - 40 km/h - 500 mm bočnice - 500 mm pozinkovaný predný nadstavec - 7 párov kotviacich ok na ložnej ploche - 4 páry kotviacich ok pod nadstavbou zvonka - Podperná noha Ibodoyz H Azepfx Aprja - Zadná podpera - Pružina na zdvíhanie bočnice - Nástupné rampy voliteľné za 1.280,00 €

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED tail lights 12 / 24 V * Removable rotating beacon at the rear * 15-pin power connector ----General Attachments: Ibodpfx Ael Th Nnjprea * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Closed plastic mudguards on front axle and straight, galvanized steel fender skirts on rear axle, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Flip-up lid (hot-dip galvanized) to the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points ----Load Securing (La-Si Package consisting of): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV-tested lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame * In the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for a total width of 3 m (not in the rear slope area) * Widening boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side-shifting ramps ----Loading Area: * Over fifth wheel: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizing suspension with 100 mm wide parabolic leaf springs ----Drawbar / Tow Eye: * Fixed welded drawbar with low-maintenance ball seat for K80 ball coupling (offset by +77 mm / 33 mm via mounting plate), with elevated gallows for connection lines ----Electrics / Lighting: * 12 V, 7 + 4-pin power line * LED lighting system 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing vehicle ----General Equipment: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Hot-dip galvanized, two-step access ladder in front of the bulkhead on the left ----Chassis: * High-tensile fine grain steel chassis ----Tipper Body: * Steel pallet - 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls – without center stanchions – pivoting via manual central locking and mechanically foldable with side wall torsion springs) * Hydraulic tailgate 500 mm high, usable as a hydraulic chute, with 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: Ijdpfxjr Dpzuo Aprjba * 1 x 7 t lashing ring recessed and foldable in each corner * 4 x 3 t lashing rings recessed and foldable each side ----Ramps: * 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 recesses for aluminum loading ramps at the rear, integrated into the chassis * Load securing in accordance with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unloaded approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML ----Brzdy: * Bez ABS / EBS, schváleno pro max. rychlost 40 km/h * Pružinová parkovací brzda * Bubnové brzdy ----Nápravy: * Gigant nápravy ----Pérování: * Tandemový vyrovnávací agregát s 100 mm širokými parabolickými listy ----Tažné oko / Tažná tyč: * Napevno svařená tažná tyč s bezúdržbovou kulovou hlavou pro K80 kulovou spojku (nastavitelná o +77 mm / 33 mm přes čelní desku), s vyvýšeným držákem pro připojovací vedení ----Elektrika / Osvětlení: * 12 V 7 + 4 pólový elektrický kabel * LED osvětlení 12/24 V se sítí proti poškození * 2 LED pracovní světlomety za vozidlem, ovládané z tažného vozidla bez nutnosti dodatečné instalace na tažném vozidle ----Všeobecné přídavné díly: * Opěrná klika vpředu * Mechanické sklopné podpěry vzadu * Boční obrysová světla s funkcí směrovky * Plastové čtvrtobloukové blatníky * Plastová skříň na nářadí cca 750 x 350 x 300 mm vpravo na boku * Dvoustupňové žárově zinkované schody před čelní stěnou vlevo ----Podvozek: * Rám z jemnozrnné oceli ----Sklápěcí korba: * Ocelová třístranná sklápěcí nástavba s robustními bočnicemi (pevná přední stěna, průběžné boční stěny – bez středových sloupků – kyvné přes manuální centrální zamykání a mechanicky sklopné s pomocí pružinového mechanismu) Iodor Dpz Hopfx Aprsba * Hydraulicky poháněná zadní stěna, výška 500 mm, slouží jako hydraulická skluzavka s úhlem otevření 115° * 4 mm Hardox 450 ocelové dno ----Zajištění nákladu: * V každém rohu 1x utopený a sklopný úvazek, nosnost 7 t * Po stranách vždy 4x utopený a sklopný úvazek na trubku, nosnost 3 t ----Rámy: * 1 pár hliníkových nájezdových ramp (nosnost 10 t/pár, při rozteči náprav nad 2500 mm), rozměr 3 570 x 410 x 120 mm, vhodné pro pneumatiková i pásová vozidla * 2 zasouvací kanály pro rampy vzadu v rámu, zajištění nákladu dle EN 12642 XL ----Výška spojení: * Naložené cca 530 mm, nenaložené cca 590 mm ----Lakování: * Konstrukce lakována odstínem RAL 9010 (čistě bílá) * Rám, tažná tyč, zadní podpěry, ochrana proti podjetí žárově zinkované * Nápravy, vzduchojem, přední opěrná klika * K80 spojka lakovaná černým odstínem ----Informace: * Nový vůz s výrobcem poskytovanou zárukou * Změny a mezitímní prodej vyhrazeny ----Dodací lhůta: * Ihned k dispozici v Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of air suspension during tipping (can be deactivated via control unit in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tires: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with repositionable K80 ball coupling ----Coupling Height: Ijdpfxsy Tr Hio Apreba * Coupling height approx. 440 - 550 mm when loaded, with elevated support for connection lines ----General Attachments: * Front support winch * Bolted steel underrun protection * Plastic quarter fenders in front of the first and behind the last axle * Removable protective grid for rear lights (not approved under the German Road Traffic Licensing Regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Steel 3-way tipper body (fixed front wall, continuous side walls without central stanchions, right side wall swinging via central lock and foldable with drop-side spring assist * Left side wall foldable with drop-side hydromatics * Rear tailgate swinging via automatic hook lock * 5 mm steel floor plate made of HARDOX-450 steel or equivalent ----Load Securing: * 4 x 3 t UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, support winch, flange drawbar painted in black tone * Tipper body painted in a RAL custom color of choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion * Chassis, protective grid for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery Time: * The vehicle is still under construction and will be completed in calendar week 44 / 2026, provided uninterrupted and consistent production

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-assist for maneuvering purposes on the 1st axle (engaged via EBS) * 1st axle as a lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated via a control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12V & 24V electrics * LED rear lights 12/24V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with repositionable K80 ball coupling, mm ----Coupling Height: * Coupling height approx. 440 - 550 mm loaded, with raised gantry for connecting lines ----General Attachments: * Support winch at the front * Bolted steel underrun protection * Plastic quarter mudguards in front of the 1st and behind the last axle * Removable guard for tail lights (not permitted for use on public roads as per national traffic regulations and must be removed before entering public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Steel 3-way tipper body (fixed headboard, continuous side walls—without central stanchions—right side wall hinged with central locking and foldable via drop-side spring bar, left side wall foldable with drop-side hydraulic system) * Rear tailgate hinged with automatic hook locking * 5mm steel floor plate made from HARDOX-450 steel or equivalent ----Load Securing: Ijdjy Tr Hcjpfx Aprjba * 4 x 3 t lashing rings per side, recessed into the external frame in accordance with accident prevention regulations (UVV) ----Painting: * Axles, air tanks, support winch, flange eye painted in black * Tipper body painted in a chosen RAL standard color (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Chassis, guards for tail lights, hot-dip galvanized ----Information: * Sample images ----Delivery Time: * The vehicle is still under construction and, assuming uninterrupted and consistent production, will be completed in week 44 / 2026.

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, celková šírka: 2 550 mm, celková výška: 970 mm, Rok výroby: 2026, Výbava: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 Truck Tandem Three-Way Tipper - Tipper body dimensions: 5,000 x 2,420 mm (internal clearance) - Side wall height: 500 mm - Floor made of fine-grained steel S 420 MC, 4 mm thick - Side walls laser-welded from high-tensile fine-grained steel, fixed front wall - 2 pairs of folding lashing rings with a lashing capacity (LC) of 5,000 daN, 1 pair each recessed front and rear in the steel floor. 4 pairs of folding lashing rings with LC 3,000 daN recessed in the steel floor. - Net hooks integrated on both sides and rear in the side wall mounts and in the front wall - Reinforced and certified body according to EN 12642 XL Ibedoy S Nwvspfx Aprja - 2 LED reversing spotlights at the rear of the trailer - Aluminium loading ramps without wheel groove, suitable for rubber-tyred and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm - Plastic toolbox - Aluminium air reservoir - BPW axle, with S-cam brake - Tyres: 235/75R17.5 Suitable for a coupling height of approx. 925 mm unladen +/- 150 mm Subject to prior sale and errors! Sale exclusively based on our General Terms and Conditions. Important Notice – Please Read: Despite careful checking of all details stated in our offer, errors may occur. In some cases, such errors arise from data transmission systems of various platform providers. Therefore, we point out that all details are provided without guarantee and do not constitute a legally binding claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information intended to initiate a contract. The information provided here is non-binding and does not represent warranted characteristics.

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves Ibjdpfxsw Tgkbj Aproa * Prvá evidencia: 11/2004 * 3 nápravy * Vzduchové odpruženie * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg * Technicky prípustná celková hmotnosť: 47 000 kg * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026