Müller-Mitteltal T3 Profi 30,0 Neu, Baggerstiel, Luftfed. kúpiť použité (5 341)

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring (TPMS) * LED lighting ----General attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox front right outside on bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down, trapezoidal steel sideboards with tailgate spring assist * Insertable steel rear wall between ramps – holder for disuse located inside at the bulkhead Lodpfsxglh Rsx Ac Djac * Bolted rear stanchions ----Load securing: * Punched outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Optionally with 3 t folding lashing rings every 600 mm * Each front and rear corner with 1 x 6.3 t lashing ring * Various holes in bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical open-grid drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Approach angle at rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of side panels in any RAL color available at extra charge ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 30/2026

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: Lasdpfxjxf Skpe Ac Doc * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equaliser assembly ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flanged drawbar eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V, 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Equipment: * Mechanical support winch at the front * Rear: 2 mechanical folding supports * Right-hand side plastic tool box * Two-step entrance front left (in direction of travel) * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the side and rear in the central locking mounts and 2 on the front wall * Steel 3-way tipper body (continuous side walls – without central posts – foldable with board wall spring assist, foldable and swinging rear flap with manual central locking) Lsdpfxol Thw Ij Ac Deac * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side, integrated into the external frame ----Ramps: * 1 pair aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment underneath the loading deck, integrated into the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, drawbar eye and support winch painted in black * Side wall paintwork in your chosen RAL colour (no special or metallic paints), changeable up to approx. 6 weeks before completion ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) Lajdpfxjylfvgj Ac Dec ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection Lsdpfx Acorwc R Ae Doac * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: Lodpfxol Thyme Ac Dsac * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 10 750 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14,4: ----Brzda: * Brzdový systém EBS * Nouzové uvolnění pružinových válců * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy ----Odpružení: * Parabolické pružiny s vyrovnávacím agregátem ----Tažná oj / Flanšová tažná oka: * výškově nastavitelná tažná oj v rozsahu 300 mm * prodloužení tažné oj o 250 mm na 2 250 mm * 40mm flanšová tažná oka ----Elektrika / Osvětlení: * RDÜ systém monitorování tlaku v pneumatikách * 15pólová elektrická zásuvka * LED osvětlení ----Obecné přídavné prvky: * přední podpěrný nástavec * zadní sklopné podpěry vně * plastová schránka na nářadí cca 858 x 500 x 500 mm vpředu vpravo zvenčí na čelní stěně * boční ochrana proti vniknutí vozidel * plastové čtvrt-blatníky ----Ložná plocha: * 50mm jehličnatá podlaha * zařízení před čelní stěnou a zadním sklonem pro dodatečnou montáž kontejnerových zámků pro přepravu 20" kontejnerů * čelní stěna se šroubovaným hladkým plechem * bočnice ze ztrubkovaného ocelového plechu -v polovině dělené, výklopné * ocelová zadní stěna, zasouvatelná mezi držák ramp – při nepoužívání uchycena uvnitř před čelní stěnou * zadní sloupky našroubované ----Zajištění nákladu: * děrovaný vnější rám, ohnutý cca 45 stupňů, s upevňovací silou 2 t každých 480 mm * možnost instalace sklopných kotev s nosností 3 t každých 600 mm * v rozích vpředu a vzadu vždy jedna kotevní oka 6,3 t * různé otvory v čelním a závěrném nosníku pro vázání nákladu s nosností 1,2 t * Profifix kotvící lišta ve středové podélné ose pro zajištění nákladu až do LC 3000 daN ----Rampy: * jednodílné mechanické mřížové nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou, cca 2 750 x 600 mm (složitelná na 20 mm) * zadní nájezdový sklon cca 860 mm podvozek ----Rozvor: * rozvor 1 140 mm ----Lakování: * tažná oj, čelní stěna, zadní vrata, sklopné podpěry a nájezdové rampy žárově zinkovány * nápravy, pružiny, vzduchové zásobníky, flanšová tažná oka a podpěrná noha lakovány černou barvou Lodpfxsv D Tcbs Ac Djac * bočnice lakované v požadovaném odstínu RAL (bez speciálních a metalických laků), lze měnit do cca 6 týdnů před dokončením ----Informace: * zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu * nový vůz s tovární zárukou * změny a předchozí prodej vyhrazeny ----Dodací lhůta: * k dodání od cca týdne 30 / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: ----Brzdy: * Wabco EBS (elektronický brzdový systém) * Nouzové odpuštění pružinových válců * Bubnové brzdy ----Nápravy: * 2x 7t Gigant nápravy ----Odpružení: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažná oje / přípojný čep: * Tažná oje výškově stavitelná o 300 mm s přípojným čepem 40 mm / přírubou ----Elektroinstalace / Osvětlení: * 15pólová zástrčka * LED koncová světla 12/24 V * Monitorování tlaku v pneumatikách s možností zobrazení v nákladním voze přes signál EBS (není nutná instalace na vozidle) ----Obecné příslušenství: * Jost mechanický opěrný naviják vpředu * Vzadu 2 mechanické sklopné stabilizační nohy * Plastová sada nářadí cca 750 x 350 x 300 mm vpředu na pravé straně podvozku * Šroubovaný podjezdový ochranný rám * Plastové čtvrtkové blatníky ----Sklápěcí nástavba: * Síťové háky v ložiskách centrálního uzamčení a 2 kusy na čelní stěně * Ocelová paletová 3stranná sklápěcí nástavba s vyztuženými Strong bočnicemi (spojité horní bočnice s vnitřním trubkovým vyztužením, bez středových sloupků, sklopné s plynovým tlumičem) * Šroubované zadní sloupky * Kombinovaná ocelová křídlová zadní stěna, dvoukřídlová, asymetricky dělená, otočná o 270° a aretovatelná (nelze sklopit), s přídavným kyvným rámem pro automatické otevření zadní stěny při sklápění, zamykání přes pozinkovaný otočný uzávěr a centrální zamykání, deaktivace automatické funkce zadní stěny při sklápění dozadu s otevřenými křídlovými dveřmi * 4 mm plechová podlaha z jemnozrné oceli ----Zajištění nákladu: * V rozích vždy 1x 5t upevňovací oko * Po stranách vždy 4x 3t zapuštěných upevňovacích ok v vnějším rámu ----Podvozek: * Podvozek z jemnozrné oceli ----Rámpy: * Vzadumountovaná kolejnice pro najížděcí rampy * 1 pár hliníkových najížděcích ramp cca 3570 x 410 mm (nosnost 10 t/pár) vhodné pro gumová i pásová vozidla * Uzamykatelný úložný prostor pod ložnou plochou v rámu podvozku pro rampy ----Pneumatiky: * Pneumatiky 358/55 R 19,5 ----Lakování: * Tažná oje, podjezdový ochranný rám, zadní sloupek, zadní sklopné nohy žárově zinkované * Nápravy, pružiny, vzduchojemy a opěrný naviják lakovány černě * Bočnice lakovány v požadovaném odstínu RAL (bez speciálního nebo metalického laku), barvu lze změnit do cca 6 týdnů před dokončením ----Informace: * Zesílená nástavba s certifikátem o zajištění nákladu * Změny a omyly vyhrazeny, mezitímní prodej možný * Ilustrační fotografie Ledpfx Aox Hm Rcsc Deac ----Dodací lhůta: * K dispozici ihned od 29. týdne 2026

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: ----Braking system: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights, 12/24 V * Tire pressure monitoring system with display capability in the truck via EBS signal - no truck-side installation required - ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right side on the chassis * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: Laedpfxjx Hm Rie Ac Doc * Mesh hooks at central locking bearings and 2 on the front wall * Steel pallet – 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal pipe reinforcement, no centre stanchions), fold-down with drop side spring lifter * Rear stanchions bolted * Combination steel wing door rear panel, 2-leaf, asymmetrically split, swivels and locks up to 270°, not fold-down, with additional pendulum frame for automatic rear wall opening during tipping, locking by galvanized rotating bar catch at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with wing door open * 4 mm fine-grained steel floor plate ----Load Securing: * 1 x 5 ton lashing point in each corner * 4 x 3 ton recessed lashing rings on each side in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting rail for access ramps * 1 pair aluminium access ramps approx. 3,570 x 410 mm (load capacity 10 tons/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment underneath the loading surface, recessed in the chassis for the ramps ----Tyres: * Tyres 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Side panel paintwork in a RAL colour of choice (no special or metallic paintwork). Can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Subject to error and prior sale * Sample images ----Delivery Time: * Available immediately from CW 29/2026

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit Lsdpfxsxf Skvo Ac Dsac ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks Lasdpfxsy Ngz Ho Ac Dsc * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: ----Brzda: * Brzdový systém EBS * Bubnová brzda * Núdzové odistenie pružinových valcov ----Náprava: * Náprava BPW ----Pruženie: * Parabolické pružiny Ledpfx Aeu I Iqroc Dsac ----Ťažné oko/Ťažná tyč: * Ťažná tyč s 40 mm skrutkovacím ťažným okom (výškovo nastaviteľné mm) ----Elektrika/Osvetlenie: * 15-pólová elektrická zásuvka * LED osvetlenie * Blikajúce LED bočné obrysové svetlá * Systém monitorovania tlaku v pneumatikách RDÜ ----Všeobecné prídavné diely: * Predná podpera * Zadné štvorcové trubkové podpery podporované pružinou s základovou doskou, bezpečnostné zaisťovacie čapy pre rôzne výšky podpery * Uzavreté blatníky z oceľového plechu s ochranou proti striekajúcej vode * Uzavretý bočný ochranný panel využiteľný ako reklamná plocha * Plastová náradieová skrinka s vloženým dnom (vodorovná montáž) cca 500 x 350 x 400 mm ----Nadstavba: * Výkyvná konštrukcia na navijak káblov, svetlá vzdialenosť medzi ramenami bubna 1 700 mm s upínacím uzáverom na zaistenie bubna na koncoch ramien a aretáciou konštrukcie k rámu vozidla pomocou stredového pazúrového zámku * Motor-hydraulický pohon bubna s olejovým motorom * Ventily a posuvné hnacie valčeky s gumovým povrchom * Hydraulický regulátor rýchlosti a brzda pre pohon bubna * Oceľová hriadeľ bubna s priemerom 76 mm so strediacimi a otočnými koncami * 1 pár centrovacích kužeľov z polyamidu so stupňovitým vyhotovením ----Rám podvozka: * Rám podvozka z torzne tuhých štvorcových rúrok a priečnych nosníkov ----Čerpacia jednotka: * Hydraulická čerpacia jednotka s benzínovým motorom Loncin vrátane ručného a elektrického štartéra * Palivová nádrž a ručný štartér * 13 HP so zubovým čerpadlom (150 bar) ----Pneumatiky: * 315/80 R 22,5 ----Pohotovostná hmotnosť: * 2 690 kg pohotovostná hmotnosť ----Lak: * Vozidlo je žiarovo pozinkované ----Informácie: * Nové vozidlo s plnou zárukou výrobcu * Chyby a medzipredaj vyhradené ----Dodacia lehota: * K dispozícii približne od 41. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on truck side) * 15-pin electrical connector * LED lighting * Front landing gear * Rear foldable support legs (external) * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Front and rear pre-fittings for retrofitting 20" container locks * Bolted flat sheet metal bulkhead * Drop-down side walls made of trapezoidal profiled steel, split 1x in the middle * Slide-in steel rear wall between the ramps, storage holder inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - 4 lashing rings mounted on each side - * In each front and rear corner 1x 6.3 t lashing ring * Profifix lashing rail, centrally along longitudinal axis, with lashing capacity up to LC 3,000 daN * Various drilling options for 1.2 t lashing capability in the front and rear cross members * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm Laodpjl Th Dfsfx Ac Djc * Chassis, drawbar, bulkhead, rear tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side walls painted in a desired RAL color (no special or metallic paints); color can be changed up to approx. 6 weeks before completion * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: Ledpfepk D I Aox Ac Dsac * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable Ljdpewh Hdxofx Ac Djac * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ - TA -R 14,4 ----Brzdy: Ledox Ipapspfx Ac Djac * EBS brzdový systém * Nouzové uvolňovací zařízení pro pružinové brzdové válce * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy ----Odpružení: * Parabolické pružiny s vyrovnávací jednotkou ----Tažná tyč / Flanšová oko: * Výškově stavitelná tažná tyč v rozsahu 300 mm - prodloužení tažné tyče o 250 mm na 2.250 mm * 40mm flanšová oj ----Elektrika / Osvětlení: * Systém monitorování tlaku v pneumatikách s možností zobrazení v nákladním vozidle přes EBS signál (bez instalace na straně nákladního vozidla) * 15-pólová elektrická zásuvka * LED koncová světla 12 / 24 V * Odnímatelné zadní LED výstražné majáky ----Obecné přídavné vybavení: * Opěrná klika vpředu * Vnější žárově zinkované sklopné podpěry vzadu * Plastová skříňka na nářadí cca 858 x 500 x 500 mm přední pravá vnější část čela * Boční ochrana proti najetí * Plastové čtvrtkryty kol ----Nízkoložná plošina: * Příprava před čelem pro dodatečnou montáž kontejnerových uzávěrů * Šroubované čelo z hladkého plechu * Sklopné bočnice z ocelového vlnitého plechu s plynovými vzpěrami * Zadní ocelová stěna zasouvatelná mezi rampy - držák pro nevyužité uvnitř před čelem * Šroubované zadní sloupky * Nájezdová šikmina vzadu cca 860 mm ----Podlaha: * 50 mm podlaha z jehličnatého dřeva * 12 mm silný a 270 mm široký gumový pruh na vnitřní straně nájezdových ramp * V nájezdové šikmině a vnější části nízkoložné plošiny (od čela po zadní příčku) vždy 12 mm silné a 210 mm široké gumové pásy ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45° se zajišťovací silou 2 t každých 480 mm * Možnost vestavby sklopných kotevních ok pro 3 t každých 600 mm * V rozích vpředu a vzadu vždy 1 x 6,3 t upínací oko * V čelní a zadní příčce různé otvory pro uchycení 1,2 t ----Rampy: * Jednodílné mechanické mřížové nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou, cca 2.750 x 870 mm (sjednotitelné až na 20 mm) ----Lakování: * Podvozek, tažná tyč, čelo, zadní stěna i nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchové zásobníky a oj lakovány černým odstínem * Bočnice v barvě RAL 9010 čistě bílá ----Informace: * -- zesílená a certifikovaná konstrukce dle EN 12642 XL vč. certifikátu o zajištění nákladu -- * Změny a předběžný prodej vyhrazeny * Nové vozidlo se zárukou výrobce ----Dodací termín: Vozidlo je ihned k dispozici

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes Ljdoykx Nqepfx Ac Deac ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (axle lock for maneuvering controlled by PIN 10 of the 15-pin connector—only for maneuvering, not for public road use, without truck-side installation) * SmartBoard control box as information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded height 900 mm, adjustable on head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign kit, front and rear * Toolboxes made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm, mounted on the right side * Hydraulic flow divider * Continuous side walls (without center posts) up to the approach slope * Rear stanchions foldable * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at rear of vehicle (operated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood floor * 400 mm steel front wall, slotted in * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t drop lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings along each side * Various holes in front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm, mechanically adjustable width * 4-section hydraulic control block for optional retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical support legs, ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing gear painted black * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty Laedpjr Dpz Aofx Ac Djc * Errors and prior sale reserved * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tyre pressure monitoring with in-cab display via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting * Front support winch Lsdpfxel Thvxs Ac Djac * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provision in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, drop-down design, split centrally once * Steel rear wall, can be slid in between the ramps, with bracket for unused storage inside at the front bulkhead * Screw-fastened rear stanchions * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm (with 4 lashing rings mounted per side) * 1 x 6.3 t lashing ring at each front and rear corner * Profifix lashing rail along vehicle longitudinal axis, centre-mounted for securing loads up to LC 3000 daN * Multiple holes in front and rear cross-members for securing loads up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (retractable to 20 mm height) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye and support winch painted in a black tone * Side wall painting available in RAL colour of choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from approx. CW 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t, nápravy Gigant * Parabolické pružiny s vyrovnávacou jednotkou * Ťažné oko výškovo nastaviteľné cca 300 mm * Podpera BPW * Mechanické zadné podpery * Plastová náradová schránka vpredu vpravo na čelnej stene * Bočná ochrana proti nárazu * LED osvetlenie * Podlaha z ihličnatého dreva 50 mm * V rohoch pred čelnou stenou a koncovým nosníkom vždy 1 x 6,3 t upevňovací krúžok, bočne vždy 2 x 6,3 t UVV upevňovacie krúžky zapustené do vonkajšieho rámu * Jednodielne mechanické mrežové nájazdové rampy s pružinovým mechanizmom pre obsluhu jednou osobou cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) Ljdpfx Acewyhzpj Djac * Čelná stena, bočné steny, blatníky a ťažné oko žiarovo pozinkované * Nápravy, pružiny, vzduchové zásobníky, predná podpera lakované v čiernom odtieni * Nové vozidlo s plnou zárukou výrobcu * Zmeny a medzipredaj vyhradené * Dodanie približne od 35. týždňa/2026

Stav: nový, maximálna hmotnosť nákladu: 6 810 kg, celková hmotnosť: 9 600 kg, konfigurácia náprav: 1 náprava, dĺžka ložného priestoru: 4 030 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * EK 9,6 ----Brzda: * EBS (elektronický brzdový systém) * Núdzové uvoľnenie pružinových valcov * Bubnová brzda ----Náprava: * SAF náprava ----Odpruženie: * Parabolické pružiny ----Ťažné zariadenie / Okno na ťažné zariadenie: * Ťažné zariadenie ako stredná oj s 40 mm skrutkovacím ťažným okom * Plynule nastaviteľná výška ťažného zariadenia pomocou vretenového zdvihacieho prvku namiesto pevného ťažného zariadenia ----Výška spojenia: * Štandardná spojovacia výška približne 900 mm (+/- 150 mm) ----Elektrika / Osvetlenie: * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v LKW cez EBS signál – bez inštalácie na strane LKW * 15-pólová elektrická zástrčka * LED zadné svetlá * Blikajúce bočné obrysové svetlá ----Všeobecné príslušenstvo: * Predný podperný zdvihák * Uzavreté plastové blatníky * Sklopná ochrana proti podbehnutiu pre cestné finišery ----Podvozok: * Podvozok z jemnozrnnej ocele ----Sklopná korba: * Paletový 3-stranný sklápač * 700 mm oceľová predná stena * Hliníkové bočné steny asymetrické – priebežné bez stredového stĺpika – sklopné s dlhodobejšími západkami, ako aj kyvné cez manuálne centrálne zamykanie * Oceľová zadná stena vysoká 800 mm a automatické otváranie zadnej steny pri vyklápaní dozadu * 4 mm podlaha z ocele Hardox 450 ----Zabezpečenie nákladu: * Na každej strane 2 páry 3 t sklopných upínacích ok, zapustených v oceľovej podlahe ----Lak: * Podvozok, ťažné zariadenie, ochrana proti podbehnutiu žiarovo zinkované * Lakovanie sklopnej korby v požadovanom odtieni RAL (ale žiadne špeciálne alebo metalické lakovanie), možná zmena do cca 6 týždňov pred dokončením ----Informácie: * Nové vozidlo s výrobnou zárukou Laedpfx Acew Ndr Us Dec * Zmeny a predaj vyhradený, chyby vyhradené ----Dodacia lehota: * dostupné približne od 42. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear * Additional lock for the trailing axle controlled from the tractor unit for maneuvering – without truck-side installation – assigned to PIN 10; lock must be deactivated before driving on public roads ----Suspension: * Air suspension with lift and lower system and RtR function ----Electrics / Lighting: Ledpfsykx I Hex Ac Deac * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * LED tail lights, 12/24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard as info tool installed with pressure sensors solely for total axle load display * 7-pin socket at the rear for overlength lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air reservoir * Mechanical crank landing gear * Galvanised steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning board package ----Low Loader Deck: * 50 mm floor covering made from larch/Douglas fir instead of spruce/fir * Rear incline – 700 mm long – at the gooseneck transition to the low-bed with checker plate covering and a perforated strip at the end for hanging aluminum loading ramps * Tread plate covering above the wheels * SP-Kombi package: Tool box with 45° corners made of galvanized steel sheet, additionally powder-coated in RAL 9006 white aluminum on the gooseneck platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the slanted corners * Folding aluminum side walls, 500 mm high, on the gooseneck platform, incl. folding and removable rear stakes * Plug-in aluminum rear panel, 150 mm high * 2nd king pin position * Preparation for container locking system * Preparation for three stowage recesses in the run-on slope from low-bed to gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding mounting sockets into the outer frame ----Load Securing: Gooseneck platform: * 50 mm holes at the front corners and front for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor at the slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings per side, recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally in front of the approach slope to the gooseneck * 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, each side, retractable and recessed in the outer frame * 4 stake pockets recessed in the outer frame on each side * Profifix lashing rail centered on the longitudinal axis (3 t lashing capacity per securing circuit) ----Excavator Boom Rest: * From the end of the last rigid axle to the rear crossmember, W= 770 mm, D= 270 mm (2 x 6.4 t lashing rings per side firmly welded in the boom rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum loading ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider on the semi-trailer (if the truck’s hydraulic pump output exceeds 40 l/min up to a max. 250 l/min), climbing

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection Laedewb Rakepfx Ac Dsc * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ - TA -R 14.4 ----Brzda: * EBS brzdový systém * Nouzový odjišťovací mechanismus pro pružinové brzdové válce * Bubnové brzdy ----Náprava: * 2 x 7 t nápravy Gigant ----Odpružení: * Parabolické listové pružiny s vyrovnávacím agregátem ----Tažná oj / Tažné oko s přírubou: * Výškově stavitelná tažná oj v rozsahu 300 mm - prodloužení tažné oje o 250 mm na celkovou délku 2 250 mm- * Tažné oko s přírubou ø 40 mm ----Elektroinstalace / Osvětlení: * Systém kontroly tlaku v pneumatikách s možností zobrazení na nákladním vozidle prostřednictvím EBS signálu (bez instalace na straně nákladního vozidla) * 15kolíková elektrická zásuvka * LED koncová světla 12 / 24 V * Odnímatelný LED maják vzadu ----Obecná výbava: * Opěrná klika vpředu * Vnější žárově zinkované výklopné podpěry vzadu * Plastová skříňka na nářadí cca 858 x 500 x 500 mm vpředu vpravo vně na čelní stěně * Boční ochrana proti podjetí * Plastové čtvrt blatníky ----Nákladová plocha: * Před čelní stěnou příprava pro dodatečnou montáž kontejnerových zámků * Šroubovaná čelní stěna z hladkého plechu * Boční stěny z profilovaného ocelového plechu - trapézový profil - sklopné s plynovými vzpěrami * Zadní ocelová stěna zasouvatelná mezi nájezdy - držák pro nevyužitou stěnu uvnitř před čelní stěnou * Šroubované zadní sloupky * Zadní nájezdová šikmina cca 860 mm ----Podlaha: * 50 mm podlaha z jehličnatého dřeva * 12 mm silný a 270 mm široký gumový pás na vnitřní straně nájezdových ramp * Ve sklonu nájezdu a na vnějším okraji nákladové platformy (od čelní ke koncové příčce) vždy 12 mm silný a 210 mm široký gumový pás ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45 stupňů, s upínací silou 2 t každých 480 mm * Možnost montáže sklopných úchytů 3 t každých 600 mm * V každém předním a zadním rohu 1 x kotevní oko 6,3 t * V čelní a koncové příčce různé otvory pro možnost zajištění nákladu 1,2 t ----Rampy: * Jednodílné mechanické rošty nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou cca 2 750 x 870 mm (složené až na 20 mm) ----Lakování: * Podvozek, tažná oj, čelní stěna, zadní stěna a nájezdové rampy žárově zinkované * Nápravy, listové pružiny, vzduchojemy a tažné oko lakovány v černé barvě * Boční stěny lakovány v RAL 9010 čistě bílá ----Informace: * --zesílená a certifikovaná konstrukce dle EN 12642 XL vč. certifikátu o zajištění nákladu-- * Změny a mezitímní prodej vyhrazeny * Nové vozidlo se zárukou výrobce Lasdpex Ipbaefx Ac Dsc ----Dodací lhůta: Vozidlo je ihned k dispozici v Egestorfě

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional lock for the trailing axle from the driver's cab for shunting purposes — no truck-side installation required — assigned to PIN 10. The lock must be deactivated before driving on public roads. ----Suspension: * Air suspension with lifting and lowering device as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal — no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as infotool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear Laodpsykx I Tsfx Ac Doc ----General attachments: * Aluminium air tanks * Mechanical crank landing gears * Galvanised steel mudguards * Swivel arm as a carrier for connecting lines in front of the front plate ----Warning package: * Mechanically adjustable warning sign package ----Low-loader platform: * 50 mm flooring made from larch / Douglas fir wood instead of spruce / fir * Rear slope — 700 mm long — on the semi-trailer platform to the low deck with checker plate covering and a perforated strip at the end for attaching aluminium approach ramps * Tear plate coverings above the wheels * SP combination package: toolbox with 45° corners made of galvanised sheet steel, additionally powder-coated in RAL 9006 white aluminium, installed on the semi-trailer platform approx. 2,480 x 500 mm * Top folding lid and side doors in the slanted corners * Foldable aluminium side walls, 500 mm high, on the semi-trailer platform, including rear stanchions, foldable and removable * Plug-in aluminium rear wall, 150 mm high * 2nd kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach slope from the low deck to the gooseneck * Preparation for retrofitting folding outriggers for 3 m width extension by welding in the bearing mounts into the outer frame ----Load securing: Semi-trailer platform: * Front corners and front 50 mm drilled holes for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor beside the approach slope * Perforated and bent outer frame 45 with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t recessed lashing rings in the outer frame Low-loader platform: * 2 x 16.5 t lashing rings centrally recessed directly in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, recessed into the outer frame * Each side with 4 stake pockets, recessed in the outer frame * Profifix lashing rail centrally on the longitudinal axis (lashing option 3 t per lashing point) ----Excavator arm trough: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings in the excavator arm trough, firmly welded) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminium approach ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp movement on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in th