Müller-Mitteltal T 4 Kompakt 40 kúpiť použité (65 167)

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: * RDÜ Tire Pressure Monitoring System Credpfx Aeu I Iqxem Sjb * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable in mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed fenders made of sheet steel with splash guards * Closed side underrun protection usable as advertising surface * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swivelling cable drum superstructure, clear width between drum arms 1,700 mm – with tension lock for securing the drum at the support arm ends, as well as central claw locking mechanism for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front landing gear * Spring-assisted square tube supports at the rear with base plate, safety locking pins for variable support heights * Drawbar with 40 mm screwed towing eye (height-adjustable ___ mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross-members * Closed steel mudguards with splash protection * Closed lateral underrun protection usable as advertising space * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling cable drum mounting, usable width between drum arms: 1,700 mm; with tension lock to secure the drum ends on the supporting arms as well as a central claw lock to secure the cable drum mounting to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed controller and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped * Hydraulic power pack with Loncin gasoline engine, including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) Crodpeu I Iqrefx Am Sjb * 315/80 R 22.5 tires * Curb weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Manual Landing Gear (front) * Spring-assisted square tube supports at rear with base plate, securing pins for multiple support heights * Drawbar with 40 mm bolt-type towing eye (height-adjustable, mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubing with cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swivel-mounted cable drum frame, clear width between drum arms 1,700 mm, with tension lock for securing drum at arm ends and a centrally positioned claw lock to secure the cable drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 1 pair of stepped centering cones made of polyamide * Hydraulic power unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer warranty Crjdpfx Aou I Iqlem Sob * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Rear square tube supports with spring assistance and base plates, safety locking pins for multiple support heights * Drawbar with 40 mm screw coupling eye (height adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and cross members * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivelling cable drum mount, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the ends of the support arms and a central claw lock for securing the drum mount to the chassis * Motor-hydraulic drum drive with oil motor Credpfx Amsu I Iqfj Ssb * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise recessed polyamide centring cones * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tyres * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Spring-assisted square tube supports at the rear with base plates, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection that can be used as an advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; with clamp lock for drum securing at the carrier arm ends and a central claw lock securing the cable drum superstructure to the chassis Cjdpfx Amsu I Iq Ej Sjrb * Motor hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepped in stages * Hydraulic power pack with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Hot-dip galvanized finish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 900 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plates and safety locking pins for different support heights * Drawbar with 40 mm bolt-type towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights Credpfxjxyniwe Am Ssb * Chassis made of torsion-resistant square tubes and cross members * Closed steel fenders with splash guards * Closed side underrun protection usable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with locking clamps to secure drum at the bearing arm ends and a central claw lock to secure the cable drum superstructure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter with centering and rotatable ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic supply and return lines * Steel construction and hydraulics prepped for retrofitting an auxiliary engine * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stav: nový, zavesenie: iný, farba: iný, typ prevodu: iný, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Úložný box na hliníkové rampy, cena za jeden úložný box, dĺžka cca 2,48 m, šírka cca 1 m, výška cca 27 cm, -- chyby v písaní, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, Ďalšie informácie: ! Crjdpfx Aeyy Urnem Seb

Stav: použitý, maximálna hmotnosť nákladu: 13 830 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2020, ďalšia kontrola (TÜV): 11/2026, Výbava: ABS, Nemecké vozidlo od prvého majiteľa nehodové Bočné steny z hliníka SAF nápravy Bubnové brzdy zachovalý stav prenájom, kúpa, lízing s opciou na kúpu prenájom s plným servisom od 590 eur mesačne bez DPH (ceny prenájmu odstupňované podľa dĺžky zmluvy) všetky informácie na Csdpfxsy Haz Ue Am Sorb Príklad lízingu s opciou na kúpu: 479 eur mesačne bez DPH pri trvaní 36 mesiacov, jednorazová zálohová platba 5 000 eur bez DPH a záverečná splátka 2 000 eur bez DPH. Všetky ceny sú uvedené bez DPH a podliehajú kladnému posúdeniu bonity.

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Crodeyy I U Aopfx Am Sob

Stav: použitý, pohotovostná hmotnosť: 3 110 kg, maximálna hmotnosť nákladu: 9 490 kg, celková hmotnosť: 12 600 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2016, ďalšia kontrola (TÜV): 02/2025, dĺžka ložného priestoru: 4 550 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 285/70R19.5, farba: modrá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, oceľová nadstavba, 2 nápravy, ojový príves, listové pruženie, ABS (protiblokovací systém), upevňovacie oká, odkladacia schránka, výkyvné dvere Nadstavba: 2-nápravový trojstranný sklápací príves s gigantovými nápravami, bubnové brzdy, rám žiarovo zinkovaný! Nakladacia výška cca 1290 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas medziobdobia a chyby vyhradené! Cjdpfx Amjwth Iis Sorb

Stav: dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 11/2015, celková dĺžka: 14 000 mm, celková šírka: 2 550 mm, celková výška: 4 050 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 17.5, rázvor náprav: 1 300 mm, Rok výroby: 2015, Výbava: ABS, = Ďalšie možnosti a výbava = - EBS - Vzduchové odpruženie zadnej nápravy = Poznámky = - Müller Mitteltal 3-nápravový nízkoložný príves - 3 × 10 000 kg nápravy - Sattlová záťaž: 11 000 kg - Rozmery ložnej plochy: dĺžka 930 cm × šírka 252 cm - Nakladacia výška: 98 cm - Rozmery krytého krku: dĺžka 500 cm × šírka 264 cm - Nakladacia výška krku: 144 cm - Posuvná plachta vľavo aj vpravo - Rozmery hydraulickej nájazdovej rampy: - Časť 1: 270 × 235 cm - Časť 2: 180 × 235 cm - Uväzovacie body - 2 úložné boxy Udržiavaný a robustný nízkoložný príves, ideálny na prepravu strojov, vysokozdvižných vozíkov a pracovných plošín! = Ďalšie informácie = Konfigurácia náprav Credpfx Amoy I Axxs Ssb Rozmer pneumatík: 235/75 17.5 Odpruženie: vzduchové odpruženie Zadná náprava 1: dvojmontáž; max. zaťaženie nápravy: 10 000 kg; vzor pneumatiky vľavo vnútri: 50 %; vzor pneumatiky vľavo vonku: 50 %; vzor pneumatiky vpravo vnútri: 50 %; vzor pneumatiky vpravo vonku: 50 % Zadná náprava 2: dvojmontáž; max. zaťaženie nápravy: 10 000 kg; vzor pneumatiky vľavo vnútri: 50 %; vzor pneumatiky vľavo vonku: 50 %; vzor pneumatiky vpravo vnútri: 50 %; vzor pneumatiky vpravo vonku: 50 % Zadná náprava 3: dvojmontáž; max. zaťaženie nápravy: 10 000 kg; riadená; vzor pneumatiky vľavo vnútri: 30 %; vzor pneumatiky vľavo vonku: 30 %; vzor pneumatiky vpravo vnútri: 30 %; vzor pneumatiky vpravo vonku: 30 % Hmotnosti Prevádzková hmotnosť: 10 700 kg Užitočná hmotnosť: 25 300 kg Celková povolená hmotnosť: 36 000 kg Stav Technický stav: dobrý Vizuálny stav: dobrý Bezpečnosť výrobku Výrobca: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-Over Flatbed Trailer Ref. No. for enquiries: 11630 – Vehicle available immediately ex-stock Alsdorf NEW VEHICLE incl. COC * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety via ramp support bar and diagonal bracing * 21t version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7m loading area with 400 mm high front wall * Extended ramps: 3m, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * Load securing package: – 4 x UVV drop lashing brackets (LC 8,000 daN) mounted to existing hole pattern in the 45° outer frame, positioned approx. 1m from front/rear cross-member – 10 x UVV retractable lashing brackets LC 3,000 daN in existing hole matrix in the outer frame – 2 x UVV lashing rings each recessed at the front and rear in the cross-member, LC 10,000 daN – Further lashing options through holes (Ø 50 mm, LC 1,200 daN) in the front and rear cross-member * Prepared for retrofitting container locks (container locks available and offered at extra charge) * 50mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, lifting and lowering * 235/75R 17.5 (8 units) dual tires with tire pressure monitoring sensor * Plastic toolbox mounted in front of the front panel, right in direction of travel * LED lighting system * 7-pin socket at the rear, connects to overlength lighting with rear light (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning panel * 1 removable LED beacon incl. mounting bracket and installation * Foldable rear supports, front support leg with gear winch --- Sample hire purchase offer from our partner MMV Leasing: €665/month net for 60 months with no down payment and zero residual value Other terms with/without down payment / residual values possible! We are a Müller-Mitteltal trading partner --- Our opening times * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, we are available by appointment * we speak German, English, Russian, Polish, French Codpfxjyvxg Uo Am Ssrb * WhatsApp

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27,0 plošina: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové valce * Bubnové brzdy * 3 x 9 t BPW Eco nápravy * Vzduchové odpruženie so zdvíhacou a spúšťacou funkciou s RTR-funkciou * 1. náprava zdvíhateľná * posledná náprava ako následná riadená náprava s elektropneumatickou uzávierkou riadenia cez PIN spätného chodu (uzávierka následnej nápravy z Fhs. pre manévrovacie účely - bez inštalácie na strane nákladného vozidla - zadelená na PIN 10 v 15-kolíkovom konektore, len na manévrovanie, nie pre verejnú cestnú premávku) * SmartBoard ovládacia jednotka ako infotool s tlakovými snímačmi na indikáciu celkového zaťaženia náprav * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle cez EBS signál bez potreby inštalácie v nákladnom vozidle * Pevné stredové ťažné oj s 50 mm prírubovým ťažným okom (zaťažené 900 mm, mm výškové nastavenie na hlavovej doske) * Mechanická podperná kladka vpredu, mechanické výklopné vzpery vzadu na podvozku * Hydraulický rozdeľovač prietoku * Bočné steny priebežné (bez stredových stĺpikov) až po najazdovú rampu * Sklopné zadné stĺpiky * Oceľová zadná stena zasunutá pred zadné stĺpiky * Mechanicky nastaviteľná sada výstražných tabúl vpredu a vzadu * Náradové skrinky z pozinkovaného oceľového plechu - čierny práškový lak - cca 650 x 300 x 600 mm na pravej strane * 15-kolíkový elektrický konektor * LED koncové svetlá * LED maják (odnímateľný) vrátane držiaka a inštalácie * 2 x LED cúvacie svetlá na zadnej časti vozidla (ovládané spätným chodom) * Blikajúce LED bočné obrysové svetlá * 60 mm smrekovcová/douglasková podlážka * 400 mm oceľová čelná stena nasadzovacia * Dierovaný vonkajší rám cca 45° ohnutý s prípravou na montáž 3 t sklopných zaisťovacích strmeňov * V rohoch vždy 1 x 10 t istenie a navyše po bokoch vždy 2 x 10 t, ako aj 3 x 6,3 t zaisťovacie krúžky * V čelnej a zadnej priečke rozličné otvory pre zaisťovacie možnosti 1,2 t * Hydraulické jednoprvkové najazdové rampy cca 3 000 x 720 mm, mechanicky bočne nastaviteľné * 4-ventilový hydraulický blok pre prípadnú dodatočnú montáž hydraulického posuvu nájazdových rámp * Podvozok, ťažné oj, čelná stena, mechanické zadné podpery, najazdové rampy žiarovo zinkované * Nápravy, vzdušník, prírubové ťažné oko a predná podperná kladka nalakované čiernou farbou * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákl. vozidle nad 40 l až do 120 l/min) * Nové vozidlo so zárukou výrobcu Credpfor Dpzxox Am Sob * Právo na chyby a medzičasný predaj vyhradené * Ihneď k dispozícii, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps Crjdpfx Asykx Nkom Seb * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Codpfx Ajykx Nqem Ssrb Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (axle lock for maneuvering controlled by PIN 10 of the 15-pin connector—only for maneuvering, not for public road use, without truck-side installation) * SmartBoard control box as information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded height 900 mm, adjustable on head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign kit, front and rear * Toolboxes made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm, mounted on the right side * Hydraulic flow divider * Continuous side walls (without center posts) up to the approach slope * Rear stanchions foldable * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at rear of vehicle (operated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood floor * 400 mm steel front wall, slotted in * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t drop lashing rings Cjdpsr Dpz Aefx Am Ssrb * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings along each side * Various holes in front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm, mechanically adjustable width * 4-section hydraulic control block for optional retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical support legs, ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing gear painted black * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2017, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 6 250 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Ďalšie informácie 400 mm sklápateľné bočné steny - Pružinový zdvihák bočnice - Nasadzovacia zadná stena - Veľký upínací balík - Dierovaná lišta na ložnej ploche - Predná oporná noha výškovo nastaviteľná - Zadné oporné nohy sklápateľné - Plastová náradová skrinka - BPW nápravy Credpfx Aey Hn D Rjm Sjb - Pružinové rampy s mriežkou

Stav: použitý, maximálna hmotnosť nákladu: 4 960 kg, celková hmotnosť: 10 500 kg, prvá registrácia: 04/1993, ďalšia kontrola (TÜV): 01/2026, dĺžka ložného priestoru: 6 260 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 2 430 mm, objem nakladacieho priestoru: 37 m³, Výbava: ABS, zdvíhacie čelo, 2-nápravový tandemový chladiarenský príves, 7 m, so zdvíhacou plošinou s nosnosťou 1 t. * THERMOKING LND-II MAX (dieselový motor) a stacionárne chladenie 380 V ELEKTRO * Číslo vozidla pre zákaznícke dopyty: 4593 * Zdvíhacia plošina * Vzduchové pruženie * EBS * Protišmykový systém (ABS) Bez záruky za tlačové a pravopisné chyby Predaj iba podnikateľom Zmeny a medzičasný predaj vyhradené. Popis slúži iba na identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Záväzné je znenie v kúpnej zmluve. * TOP SERVIS + KVALITA * Radi Vám pripravíme ponuku na leasing, financovanie alebo splátkový predaj Poistenie záruky na vyžiadanie u poisťovateľa * TÜV / UVV LBW / tachografová kontrola a montáž OBU zariadenia cez našich partnerov na mieste * Colná poznávacia značka na 30 dní Všetky colné doklady pre export sú možné, je nutné ich objednať individuálne * Mýto cez Toll-Collect je možné objednať u nás * Bezplatný transfer z letiska Stuttgart alebo železničnej stanice Metzingen (Württ) * ŽELEZNIČNÁ STANICA PRE PRÍCHOD: 72555 METZINGEN/WÜRTT. Crodpfx Amoykxfls Sob * PRE ANGLIČTINU * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP číslo * * ---- Navštívte našu webovú stránku na * viac ako 200 vozidiel stále na sklade

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS = Ďalšie informácie = Crjdpfext Rw Rox Am Ssb Hrubá hmotnosť: 4.600 kg Užitočné zaťaženie: 13.400 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 6.500, US$ 7.658

Stav: použitý, pohotovostná hmotnosť: 2 700 kg, maximálna hmotnosť nákladu: 7 300 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2006, dĺžka ložného priestoru: 4 500 mm, šírka ložného priestoru: 2 200 mm, výška ložného priestoru: 1 000 mm, zavesenie: oceľ, veľkosť pneumatiky: 245/70R19.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, steel body, leaf suspension, 2 axles, BPW axles, tandem, lashing eyes, underrun protection, front support, pendulum tailgates Body: 3-way tipper trailer, steel side walls, swinging and foldable, 2x BPW axles, drum brakes! Loading height approx. 1040 mm. Side walls foldable at top and bottom! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Csdpfx Asytxx Rjm Ssrb

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profil 30.0: * EBS-E (elektronisches Bremssystem) * RDÜ Reifendrucküberwachung * Notlöseeinrichtung für Federspeicherzylinder * Trommelbremsen * 3 x 11 t BPW Eco Achsen * Luftfederung mit Hebe- und Senkanlage * SmartBoard als Infotool am Anhänger, inkl. Drucksensoren zur Anzeige der Gesamtachslast je Achsgruppe * Seitlicher Anfahrschutz * Mechanisch verstellbare Warntafelsätze vorn und hinten * Vorderachse mit geschlossenen Kunststoffkotflügeln, Hinterachse mit geraden, feuerverzinkten Stahlblechschürzen, jeweils mit Spritzschutz * Klappdeckel (feuerverzinkt) zum Werkzeugkasten in der Drehgestellplattform * Werkzeugkasten aus verzinktem Stahlblech, ca. 650 x 300 x 600 mm (schwarz pulverbeschichtet), seitlich rechts * 15-poliger Stromstecker * LED-Beleuchtung 12 / 24 V * LED-Rundumkennleuchte (abnehmbar) hinten * Seitenmarkierungsleuchten mit Blinkeransteuerung * Zugstange mit 40 mm Zugöse sowie Höhenverstellung über Zugfeder & Spannschloss * Reifendrucküberwachungssystem mit Anzeige im LKW über EBS-Signal (keine LKW-seitige Installation notwendig) * Gummiauflage auf den Klapprampen sowie an der Auffahrschräge links und rechts (ca. 860 mm lang) * Gummibelag auf den Längsträgern vom Stirn- bis Abschlussquerträger * Hartholzboden auf den Laufflächen der Tiefladeplattform * Jeweils 4 Rungentaschen pro Seite, kombinierbar mit 2 t Zurrmöglichkeit * LaSi-Paket bestehend aus: 5 Paar UVV-Zurringe, schwenk- und absenkbar, in alle Richtungen belastbar, im Außenrahmen eingelassen – in den Ecken 13,4 t, sonst 10 t * 6 Paar mechanische Klappausleger für 3 m Gesamtladebreite (nicht an der Heckschräge) Credpfxeq Dyvcs Am Sjb * Bohlenhalterung unter der Ladefläche, längsseitig * Walzenanschlag vor dem Stirnträger, hochgezogen, seitlich je 1 x 6,4 t Zurröse * Hydraulische Klapprampen (ca. 4.650 x 720 mm) mit hydraulisch ausstellbarem Spitzteil und Lasthalteventilen * Hydraulischer seitlicher Rampenverschub * Heckabstützung hydraulisch (einstufiger Zylinder) * Hydraulischer Mengenteiler im Anhänger (bei Pumpenleistung LKW > 40 l/min bis max. 140 l/min) * Spritzwassergeschützter Hydraulik-Steuerblock * Zweileitungshydraulik * Ladefläche über Drehkranz: ca. 1.960 x 2.520 mm * Hintere Ladefläche: ca. 6.500 x 2.520 mm (inkl. 860 mm Anfahrschräge) * Ladehöhe beladen: ca. 890 mm +/- 20 mm (Luftfederung) * Fahrgestell, Drehgestell, Walzenanschlag, Klappverbreiterungen & Auffahrrampen feuerverzinkt * Achsen, Drehkranz, Zugstange, Luftkessel etc. in Schwarz lackiert * Ladehöhe beladen: ca. 890 mm +/- 20 mm * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Verfügbar ab KW 20/2026

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profil 30,0: * EBS-E (elektronisches Bremssystem) * RDÜ Reifendrucküberwachung * Notlöseeinrichtung für Federspeicherzylinder * Trommelbremsen * 3 x 11 t BPW Eco Achsen * Luftfederung mit Hebe- und Senkanlage * SmartBoard als Informations-Tool am Anhänger, mit Drucksensoren zur Anzeige der Gesamtachslast je Achsgruppe * Seitlicher Anfahrschutz * Mechanisch verstellbare Warntafelpakete vorne und hinten * VA (Edelstahl) geschlossene Kunststoff-Kotflügel vorne sowie verzinkte, gerade Stahlblechschürzen hinten, jeweils mit Spritzschutz * Klappdeckel (feuerverzinkt) zum Werkzeugkasten in der Drehgestell-Plattform * Werkzeugkasten aus verzinktem Stahlblech, ca. 650 x 300 x 600 mm (schwarz pulverbeschichtet), seitlich rechts * 15-poliger Stromstecker * LED-Beleuchtung 12 / 24 V * LED-Rundumleuchte (abnehmbar) hinten Cedpfx Aotplv Nom Ssrb * Seitenmarkierungsleuchten mit Blinkansteuerung * Zugschere mit 40 mm Zugöse und Höheneinstellung über Zugfeder & Spannschloss * Reifendrucküberwachungssystem mit Anzeigeoption im LKW über EBS-Signal (ohne separate LKW-Installation) * Gummibelag auf den Klapprampen sowie auf den Auffahrschrägen links und rechts (je ca. 860 mm lang) * Gummibelag auf Längsträgern vom Stirn- bis Abschlussträger * Hartholzboden auf den Laufflächen der Tiefladeplattform * Je Seite 4 Rungentaschen mit gleichzeitiger 2 t Zurrmöglichkeit * Ladungssicherungspaket bestehend aus: 5 Paar UVV-zertifizierte Zurringe, schwenk- und absenkbar, in alle Richtungen belastbar und im Außenrahmen eingelassen – an den Ecken 13,4 t, sonst 10 t * 6 Paar mechanische Klappausleger für 3 m Gesamtbreite (nicht in der Heckschräge) * Bohlenhalter unter der Ladefläche, längs verbaut * Walzenanschlag vor dem Stirnträger hochgezogen, seitlich je 1 x 6,4 t Zurröse * Hydraulische Klapprampen (ca. 4.650 x 720 mm) mit hydraulisch ausstellbarem Spitzteil und Lasthalteventilen * Hydraulischer Seitenverschub der Rampen * Hintere hydraulische Abstützung (einstufiger Zylinder) * Hydraulischer Mengenteiler im Anhänger (bei hydraulischer Pumpenleistung des LKW von über 40 bis max. 140 l/min) * Hydrauliksteuerblock spritzwassergeschützt * Zweileitungshydraulik * Ladefläche über dem Drehkranz: ca. 1.960 x 2.520 mm * Hintere Ladefläche: ca. 6.500 x 2.520 mm (inkl. 860 mm Anfahrschräge) * Ladehöhe beladen: ca. 890 mm +/- 20 mm durch Luftfederung * Fahrgestell, Drehgestell, Walzenanschlag, Klappverbreiterungen und Auffahrrampen feuerverzinkt * Achsen, Drehkranz, Zugschere, Luftkessel etc. in Schwarz lackiert * Ladehöhe beladen: ca. 890 mm +/- 20 mm * Neufahrzeug mit Hersteller-Gewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Lieferbar ab KW 20/2026

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Pre-installed fittings at the front bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Drawbar with 50 mm flange eye and height-adjustable tow bar * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lights * Design version: 21 t GVW with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Pre-installed fitting at the front bulkhead for subsequent installation of container locks * Screw-on bulkhead, smooth steel plate * Split steel side walls, trapezoidal-profiled, foldable with central folding stanchion * Removable steel rear wall, can be slid in between ramps (bracket for storage provided inside at front bulkhead when not in use) Crjdpfxsl Tihxs Am Sob * Rear stanchions bolted * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN * One 10 t lashing ring at each front and rear corner * Load securing package with two 8 t retractable lashing rings per side in the outer frame, various holes in front and end crossmembers for 1.2 t lashing options * One-piece mechanical grating-type ramps with spring assist for one-person operation, approx. 3,000 x 620 mm (can be retracted to 20 mm) * Rear approach angle approx. 860 mm at chassis * Drawbar, front bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black shade * Loading height unladen approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Side wall paintwork in desired RAL color shade (no special or metallic paint, color changeable up to approx. 6 weeks before completion) * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 29 / 2026

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake chambers * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Fittings at the front bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21 t GVWR version with reinforced chassis and strengthened axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamp-mounted * Fittings at the front bulkhead for subsequent installation of container locks * Bolted smooth sheet metal front wall * Split side walls made of steel sheet, trapezoidal profile, foldable with central drop-in stake * Steel rear wall, can be inserted between the ramps—storage bracket for disuse located inside at the front wall * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * Profifix lashing rail centrally along the longitudinal axis, up to LC 3000 daN * 1 x 10 t lashing ring in each front and rear corner * Cargo securing package: 2 x 8 t recessed lashing rings per side in the outer frame; various bores for 1.2 t lashing points in the front and end carrier * One-piece mechanical grating loading ramps with spring mechanism for single-operator use, approx. 3,000 x 620 mm (can be collapsed to 20 mm width) * Rear approach slope approximately 860 mm on the chassis * Drawbar, front wall, tailgate, foldable supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear lacquered in black * Loading height (unladen) approx. 940 mm Cjdpfx Aeq Dyu Uem Sjrb * Loading height (laden) approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Drop-side paintwork in your choice of RAL color (except special or metallic finishes), changeable up to approx. 6 weeks before completion * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026

Stav: použitý, celková hmotnosť: 34 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2020, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2020, Výbava: ABS, 12174 SCHWARZMÜLLER 3-Axle Flatbed Semi-Trailer RH 80 / CONTAINER / STAKE POCKETS / SAF / LIFT AXLE Manufacturer: SCHWARZMÜLLER First registration: 10/2020 Dimensions: 13,600 x 2,480 mm Gross vehicle weight: 34,000 kg Unladen weight: 6,580 kg Crjdpfx Amexubiyo Sjb Kingpin load: 12,000 kg Mileage: 162,000 km Axle make: SAF disc brakes Lift axle Phenolic plywood floor Toolbox Exterior paint: red Body paint: white Chassis paint: red Tyres: 6 units Tyre tread depth: 9/10/6/6/7/11 mm Rear axle tyres: 385/55 R 22.5 Robust flatbed semi-trailer with stake pockets and 6 pairs of container locks 1 x 40', 2 x 20', 1 x 20' center, and 1 x 30' position Multilock external frame SAF disc brakes 430 mm / LIFT AXLE Front wall height: 2,400 mm Fifth-wheel height: 1,130–1,220 mm Stake pocket set distributed in 9 positions across the load area Stake dimensions: 80 x 80 mm 23 pairs of lashing rings on the loading platform Only 162,000 km mileage 4 x toolboxes Width extension boards External frame repainted All details are without guarantee, subject to prior sale! If you have any questions about this or other vehicles, please call us.