Müller-Mitteltal Ka-Ta-R 14,4 Breitreifen, Rampen kúpiť použité (56 530)

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal -no truck-side installation required- * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side of the chassis, front Bjdpfx Adsx Hm Rievjwl * 15-pin power connector * LED tail lights 12/24 V * Bolted underrun protection * Plastic quarter mudguards * Net hooks at the central locking brackets as well as 2 at the front wall * Chassis made from fine-grain steel * Steel pallet 3-way tipper body with reinforced Strong sideboards (continuous side panels on top with internal pipe reinforcement -without center stakes- foldable with sideboard spring lifter) * Rear stakes bolted * Combination steel wing doors at the rear, 2-leaf, asymmetrically split, swiveling and lockable up to 270°, not foldable, with additional pendulum frame for automatic tailgate opening during tipping process, rear lock via galvanized rotary bolt and central locking, deactivation function for automatic tailgate operation when tipping backwards with open wing door * In each corner 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm floor plate made of fine-grain steel * Rear mounting rail for loading ramps * Body – reinforced – with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment below the loading area rear, integrated in the chassis for the ramps * Drawbar, underrun protection, rear stake, folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black * Tires 358/55 R 19.5 * Sideboard coating in RAL 9010 pure white * Side wall paint in an RAL shade available at extra charge * Subject to errors and prior sale * Immediately available from calendar week 10/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal—no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Tie-down hooks at each central locking housing and 2 on the front bulkhead Bwedpfox Hm Rcjx Advjl * Chassis made of fine-grained steel * Steel three-way tipper body with reinforced Strong side walls (continuous upper side panels with internal tube reinforcement—without central stanchions—side walls foldable with sidewall spring lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split—270° swing and lockable—not foldable—and with additional swing frame for automatic tailgate opening during tipping, rear locking via galvanized rotary lock and central locking, deactivation function for automatic tailgate when tipping backwards with open wing doors * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm fine-grained steel floor plate * Rear ramp rails mounting track * Reinforced body with load securing certificate * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment recessed under the loading area at the rear, integrated into chassis for ramps * Drawbar, underrun guard, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted black * Tires: 358/55 R 19.5 * Side boards painted RAL 9010 pure white * Painting of side panels in RAL color of choice available for a surcharge * Errors and prior sale excepted * Immediately available ex stock from CW 10/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders Bsdpfx Adjtplwievewl * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) Bjdoxptn Ropfx Advowl * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, ďalšia kontrola (TÜV): 03/2024, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 910 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, listové pruženie, 3 nápravy, nápravy BPW, otočný čap, ABS (antiblokovací systém), upevňovacie oká, hydraulické rampy, zadné podpery, bočná hliníková ochrana proti podbehnutiu, dvojitá montáž pneumatík, odkladacia schránka Bwodeqpgtmspfx Advjl Nadstavba: Hydraulické rampy, možné rozšíriť na 3 m. BPW nápravy, bubnové brzdy, upevňovacie krúžky na vonkajších stranách. Dĺžka ramien cca 4000 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas inzercie a chyby vyhradené!

Stav: použitý, pohotovostná hmotnosť: 2 700 kg, maximálna hmotnosť nákladu: 7 300 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2007, dĺžka ložného priestoru: 5 020 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 400 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Lokalita vozidla: Bovenden, 2 nápravy, nápravy BPW, tandem, listové odpruženie, ABS (antiblokovací systém), upevňovacie oká, mechanické rampy, predná podpera, úložný box, výškovo nastaviteľné ojisko Nadstavba: Tandemový nízkozdvižný príves s mechanickými nájazdovými rampami, 2x BPW náprava, bubnové brzdy! Nakladacia výška cca 930 mm! Bsdpfx Adjwvikqovewl Dĺžka ramien cca 2600 mm! Údaje o príslušenstve bez záruky, zmena, medzipredaj a omyly vyhradené!

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves * Prvá evidencia: 11/2004 * 3 nápravy * Vzduchové odpruženie * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg Bwodow Tgkbepfx Advjl * Technicky prípustná celková hmotnosť: 47 000 kg * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners Bodpfx Aol Tlhrjdvowl * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower function and RtR valve * Manometer pressure display for payload determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame Bjdpfsl Tnu Ajx Advowl * Mechanically adjustable warning board packages front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel skirts with spray protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Towing eye (50 mm) with height adjustment * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front structure in front of the bogie platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the bogie platform's steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope) * Plank holder for extensions under chassis, left longitudinal direction * Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support * Hardwood flooring on running surfaces of low-loader platform * Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * Outer planks of loading ramps made of hardwood * Steel construction prepared for 6-position control valve * Unladen loading edge approx. 950 mm +/- 20 mm (chassis) * Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, towing eye assembly painted black-- * Tyres: 235/75 R 17.5 * Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Číslo pre dopyty: 11599 * NOVÉ VOZIDLO - ihneď dostupné na sklade Alsdorf * všestranné využitie: stavebníctvo, záhradná a krajinárska úprava, poľnohospodárstvo a lesníctvo – použitie ako sklápač alebo podvalník Müller-Mitteltal KA-TA-R 11,9 tandemový podvalníkový trojstranný sklápací príves s nájazdovými rampami * Pneumatiky 385/55 R19,5 (4 ks), nápravy BPW, parabolické pružiny, bubnové brzdy * Systém kontroly tlaku v pneumatikách * Celková hmotnosť: 11 900 kg, užitočná nosnosť: 8 750 kg * EBS multi-napäťová inštalácia pre ťažné vozidlá s 12 V a 24 V elektrikou (napr. poľnohospodárske a lesnícke vozidlá) * Bočné obrysové svetlá s ukazovateľom smeru * LED osvetlenie 12 V + 24 V s pripojovacím káblom 1×15-pól a 1 pripojovací kábel navyše v sérii, prevedenie 12 V 13-pól s prázdnymi zásuvkami pre oba elektrické konektory * Pozinkovaná podlaha 5 m × 2,42 m, bočnice 0,5 m zvárané laserom, výkyvné, sklopné a odnímateľné, pripravené na dodatočnú montáž nástavcov bočníc * Uzamykateľný priestor pod sklápacím mostíkom na nájazdovú rampu * Vrátane hliníkových rámp, nosnosť 8 t, dĺžka 3,57 m, uložené v rampovom tuneli pod sklápačkou * Predná stena žiarovo pozinkovaná * 4 UVV upevňovacie krúžky LC 5000 daN vpredu a vzadu + 8 zapustených a sklopných kotviacich ok LC 3000 daN v podlahe sklápacieho vozidla (s vycentrovaním) * Ťažné oko plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm * Hák na sieť * Prišroubované, pozinkované zadné stĺpiky * ---- * Sme obchodný partner Müller-Mitteltal! Vyžiadajte si od nás ponuku! * Príklad: 519 € bez DPH pri 60 mesiacoch bez akontácie a zostatkovej hodnoty. Ponuka nášho finančného partnera FM LeasingPartner ----Naše otváracie hodiny: Bedpsyhtwwofx Advswl Pondelok – štvrtok: 08:00 – 17:00 Piatok: 08:00 – 15:00 Mimo otváracích hodín sme vám k dispozícii na základe dohody. Hovoríme po nemecky, hovoríme po anglicky, hovoríme po poľsky, hovoríme po francúzsky. Whatsapp Leasing, financovanie, možný výkup starého vozidla----

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders Bwsdpsrczm Djfx Advel * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with indication possible in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour tape on the sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable LED rotating beacon at rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed plastic single mudguards at front * Straight steel mudguards at rear, each with spray protection (spray mist suppression) * Lateral underrun protection * Extended offset bend by 500 mm to the front * Bogie platform extension by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Deck over bogie platform with 50 mm softwood, and 60 mm softwood in low-bed platform * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included), each with 2 t lashing possibility * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform, 1 pair of 13.4 t lashing rings front/rear on the side outer frame, and 4 pairs of 10 t lashing rings per side, swiveling, lowerable, loadable in all directions and recessed into outer frame; 2 pairs of 6.4 t rings per side in excavator stick tray; 8 pairs of galvanized folding extensions for 3 m overall width (not at rear slope) * Widening planks stored laterally left in a storage compartment * Excavator stick tray above rear axle up to end of approach slope approx. 2300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (incl. 860 mm approach slope) * Chassis, bogie, loading ramps, and mechanical rear drop supports hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 21 / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear Bjdpjl Th Evofx Advowl * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin as well as additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel holder as basket version, mounted right side * Closed single plastic mudguard at front * Straight rear steel mudguards each with spray protection (anti-spray mist) * Side underrun protection * Extended offset by 500 mm forward * Front extension of the turntable platform by 520 mm with 45° corners, 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Floor over turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo * Each side with 4 stake pockets (no stakes included), each with 2 t lashing point * Cargo securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and each side 4 pairs of 10 t lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings in the excavator arm support, 8 pairs of galvanized fold-out markers for 3 m total width (not in the rear slope) * Widening planks stored left side in a storage compartment * Excavator arm support above the rear axle to the end of the access slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp axle * Load area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm access slope) * Chassis, turntable, loading ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted black * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Stav: použitý, pohotovostná hmotnosť: 3 260 kg, maximálna hmotnosť nákladu: 7 240 kg, celková hmotnosť: 10 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2008, dĺžka ložného priestoru: 7 100 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 2 600 mm, celková dĺžka: 2 550 mm, celková šírka: 3 750 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 19,5, farba: sivý, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Lokalita vozidla: Bovenden, ABS (antiblokovací systém), vzduchové odpruženie, 2 nápravy, nápravy BPW, tandem, posuvná plachta (gardína), viazacie oká, zdvíhanie a spúšťanie korby, priebežný nakladací systém, výškovo nastaviteľné oj. Bwjdpfxoi Rpxae Advsl Nadstavba: priebežne nakladateľná, portálové dvere vpredu, posuvné zariadenia, zadné veko s rolovacou plachtou, bubnové brzdy. Údaje o príslušenstve sú bez záruky, zmeny, predaj v medziobdobí a omyly vyhradené!

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) Bodewh Hdxspfx Advswl * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 8 450 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 22 420 mm, výška ložného priestoru: 1 500 mm, Rok výroby: 2024, * KA-TA-R 11,9 Masterline: * incl. 1 m mesh side extensions * EBS braking system * Emergency release device for spring brake cylinders * TPMS (Tire Pressure Monitoring System) * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit Bjdpfx Asp Ncl Sjdvowl * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 rear mechanical hot-dip galvanized folding supports * Right-hand side galvanized steel toolbox * 15-pin electrical connector * Bolted underrun guard with LED tail lights * Plastic quarter mudguards * Mesh hooks on sides and rear in the central locking housing, plus 3 on the front wall * Hot-dip galvanized chassis * Fully galvanized steel 3-way tipper body * Continuous side walls without central stanchion, foldable, with spring-assisted drop sides * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized bolted rear stanchion * 1 x 5 t recessed and foldable lashing point at each corner, plus 4 x 3 t on each side * Lashing rings set into the outer frame, foldable * 4 mm steel floor plate * Rear ramp mounting track * Body reinforced with load securing certificate per EN 12642 XL * 1 pair aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment beneath the load bed, integrated into the chassis * Tyres: 235/75 R 17.5 * Axles, springs, air tanks, drawbar and landing gear painted black * Side wall body colour hot-dip galvanized * 1 meter galvanized mesh side extensions * Sample images * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf, A7

Stav: použitý, maximálna hmotnosť nákladu: 7 950 kg, celková hmotnosť: 11 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2010, ďalšia kontrola (TÜV): 02/2026, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková hmotnosť: 11.000 kg Pohotovostná hmotnosť: 3.050 kg Užitočná nosnosť: 7.950 kg Celková dĺžka: 8.100 mm Dĺžka ložnej plochy: celkovo cca 6.000 mm Šírka: 2.550 mm / šírka ložnej plochy cca 2.470 mm Výška nakladania: 900 mm Ďalšie informácie - výškovo nastaviteľné oj - podporná noha - bočnice 400 mm, pružinové - elektrické koleso - nápravy BPW - mrežové rampy, bočne posuvné - lezecké lišty, zadná podpera - veľký upínací balík Bwodpfx Aex E I Utjdvsl

Stav: použitý, maximálna hmotnosť nákladu: 10 100 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2001, ďalšia kontrola (TÜV): 11/2025, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 1 000 mm, celková šírka: 2 550 mm, Celková hmotnosť: 13 500 kg Prázdna hmotnosť: 3 400 kg Užitočné zaťaženie: 10 100 kg Celková dĺžka: 8 100 mm Dĺžka ložnej plochy: 6 000 mm Šírka: celková šírka 2 550 mm / šírka plošiny 2 460 mm Výška nakladania: cca 1 000 mm Ďalšie informácie Bsdpfx Adjw Nu I Tjvowl - Pneumatiky 285/70R19,5 - Bočnice 400 mm, 1x delené

Stav: použitý, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2018, dĺžka ložného priestoru: 5 060 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2018, MUELLER MITTELTAL Príves (SKLÁPAČ) 5,06 m Dovezené / BEZ HAVÁRIE VO VEĽMI DOBROM STAVE! ? ROK VÝROBY: 2018 VZDUCHOVÝ PODVOZOK ROZMER PNEUMATÍK: 385/55R19,5 ROZVOR KOLIES: 115 PLOŠINA: 506 x 242 x 50 m CELKOVÁ HMOTNOSŤ: 13 500 kg NOSNOSŤ: 6 350 kg TEL: Bjdey E Ecnspfx Advowl KUBA – POĽSKY, ANGLICKY, NEMECKY, TALIANSKY SEBASTIAN – POĽSKY, NEMECKY, TALIANSKY, ????? LASZLO – MAĎARSKY COSTEL – RUMUNSKY? (Vybavíme všetky formality na export vrátane čísla) RADEK – ?????

Stav: použitý, pohotovostná hmotnosť: 5 750 kg, maximálna hmotnosť nákladu: 24 250 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1993, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Bwedpfxoy Ifhvo Advel

Stav: použitý, konfigurácia náprav: 2 nápravy, celková šírka: 25 000 mm, celková výška: 40 000 mm, Rok výroby: 2014, Výbava: ABS, Na otázky ohľadom vozidla Vám rád odpovie pán Seidel (telefonicky). MÜLLER MITTELTAL SF32BM/BT auto-nadstavba na betón Nadstavba: Liebherr HTM 1004 10m³, BPW nápravy, bubnové brzdy, pružinové zásobníky, Wabco ABS, 1. náprava zdvíhacia, vzduchové odpruženie, prípustná celková hmotnosť: 32.000 kg, pohotovostná hmotnosť: 6.510 kg, užitočné zaťaženie: 25.490 kg, dezén pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Na požiadanie Vám pripravíme ponuku na leasing alebo financovanie. Pán Seidel Vám ochotne poradí telefonicky. Ďalšie informácie nájdete na našej domovskej stránke. ... Chyby, zmeny a medzipredaj vyhradené!!! Bwodoyfu Sdopfx Advol = Ďalšie informácie = Celková prípustná hmotnosť: 32.000 kg Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t Gigant nápravy * Parabolické listové pružiny s vyrovnávacou jednotkou * Výškovo nastaviteľná oj o cca 300 mm Bsdpfxowyhzpj Advowl * BPW podperný zdvihák * Mechanické oporné nohy vzadu * Plastová náradová skrinka vpredu vpravo na čelnej stene * Bočný nárazový chránič * LED osvetlenie * 50 mm podlaha z ihličnatého dreva * V rohoch pred čelnou stenou a zadným nosičom vždy 1 x 6,3 t kotviaci bod, po stranách vždy 2 kotviace UVV oká 6,3 t zapustené v vonkajšom ráme * Jednodielne mechanické rampy s roštom s pružinou pre jednoručnú obsluhu cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a oj žiarovo zinkované * Nápravy, pružiny, vzduchová nádrž, predný zdvihák lakované v odtieni čiernej * Nové vozidlo s plnou zárukou výrobcu * Chyby a predaj počas ponuky vyhradený * Ihneď k dispozícii z Egestorfu

Stav: dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 11/2015, celková dĺžka: 14 000 mm, celková šírka: 2 550 mm, celková výška: 4 050 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 17.5, rázvor náprav: 1 300 mm, Rok výroby: 2015, Výbava: ABS, = Ďalšie možnosti a výbava = - EBS - Vzduchové odpruženie zadnej nápravy = Poznámky = - Müller Mitteltal 3-nápravový nízkoložný príves - 3 × 10 000 kg nápravy - Sattlová záťaž: 11 000 kg - Rozmery ložnej plochy: dĺžka 930 cm × šírka 252 cm - Nakladacia výška: 98 cm - Rozmery krytého krku: dĺžka 500 cm × šírka 264 cm - Nakladacia výška krku: 144 cm - Posuvná plachta vľavo aj vpravo - Rozmery hydraulickej nájazdovej rampy: - Časť 1: 270 × 235 cm - Časť 2: 180 × 235 cm - Uväzovacie body - 2 úložné boxy Udržiavaný a robustný nízkoložný príves, ideálny na prepravu strojov, vysokozdvižných vozíkov a pracovných plošín! = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 235/75 17.5 Odpruženie: vzduchové odpruženie Zadná náprava 1: dvojmontáž; max. zaťaženie nápravy: 10 000 kg; vzor pneumatiky vľavo vnútri: 50 %; vzor pneumatiky vľavo vonku: 50 %; vzor pneumatiky vpravo vnútri: 50 %; vzor pneumatiky vpravo vonku: 50 % Zadná náprava 2: dvojmontáž; max. zaťaženie nápravy: 10 000 kg; vzor pneumatiky vľavo vnútri: 50 %; vzor pneumatiky vľavo vonku: 50 %; vzor pneumatiky vpravo vnútri: 50 %; vzor pneumatiky vpravo vonku: 50 % Zadná náprava 3: dvojmontáž; max. zaťaženie nápravy: 10 000 kg; riadená; vzor pneumatiky vľavo vnútri: 30 %; vzor pneumatiky vľavo vonku: 30 %; vzor pneumatiky vpravo vnútri: 30 %; vzor pneumatiky vpravo vonku: 30 % Hmotnosti Prevádzková hmotnosť: 10 700 kg Užitočná hmotnosť: 25 300 kg Bodpfsy I Axxsx Advswl Celková povolená hmotnosť: 36 000 kg Stav Technický stav: dobrý Vizuálny stav: dobrý Bezpečnosť výrobku Výrobca: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27,0 plošina: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové valce * Bubnové brzdy * 3 x 9 t BPW Eco nápravy * Vzduchové odpruženie so zdvíhacou a spúšťacou funkciou s RTR-funkciou * 1. náprava zdvíhateľná * posledná náprava ako následná riadená náprava s elektropneumatickou uzávierkou riadenia cez PIN spätného chodu (uzávierka následnej nápravy z Fhs. pre manévrovacie účely - bez inštalácie na strane nákladného vozidla - zadelená na PIN 10 v 15-kolíkovom konektore, len na manévrovanie, nie pre verejnú cestnú premávku) * SmartBoard ovládacia jednotka ako infotool s tlakovými snímačmi na indikáciu celkového zaťaženia náprav Bwjdor Dpzxjpfx Advol * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle cez EBS signál bez potreby inštalácie v nákladnom vozidle * Pevné stredové ťažné oj s 50 mm prírubovým ťažným okom (zaťažené 900 mm, mm výškové nastavenie na hlavovej doske) * Mechanická podperná kladka vpredu, mechanické výklopné vzpery vzadu na podvozku * Hydraulický rozdeľovač prietoku * Bočné steny priebežné (bez stredových stĺpikov) až po najazdovú rampu * Sklopné zadné stĺpiky * Oceľová zadná stena zasunutá pred zadné stĺpiky * Mechanicky nastaviteľná sada výstražných tabúl vpredu a vzadu * Náradové skrinky z pozinkovaného oceľového plechu - čierny práškový lak - cca 650 x 300 x 600 mm na pravej strane * 15-kolíkový elektrický konektor * LED koncové svetlá * LED maják (odnímateľný) vrátane držiaka a inštalácie * 2 x LED cúvacie svetlá na zadnej časti vozidla (ovládané spätným chodom) * Blikajúce LED bočné obrysové svetlá * 60 mm smrekovcová/douglasková podlážka * 400 mm oceľová čelná stena nasadzovacia * Dierovaný vonkajší rám cca 45° ohnutý s prípravou na montáž 3 t sklopných zaisťovacích strmeňov * V rohoch vždy 1 x 10 t istenie a navyše po bokoch vždy 2 x 10 t, ako aj 3 x 6,3 t zaisťovacie krúžky * V čelnej a zadnej priečke rozličné otvory pre zaisťovacie možnosti 1,2 t * Hydraulické jednoprvkové najazdové rampy cca 3 000 x 720 mm, mechanicky bočne nastaviteľné * 4-ventilový hydraulický blok pre prípadnú dodatočnú montáž hydraulického posuvu nájazdových rámp * Podvozok, ťažné oj, čelná stena, mechanické zadné podpery, najazdové rampy žiarovo zinkované * Nápravy, vzdušník, prírubové ťažné oko a predná podperná kladka nalakované čiernou farbou * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákl. vozidle nad 40 l až do 120 l/min) * Nové vozidlo so zárukou výrobcu * Právo na chyby a medzičasný predaj vyhradené * Ihneď k dispozícii, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) Bwjdpfsykx Nkjx Advsl ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis Bsdpfx Adjykx Nqevowl * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid