Möslein T 4 Vb H1 Neuer 4 Achs Tieflader Hydraulischen Rampen kúpiť použité (65 296)

Stav: nový, celková hmotnosť: 31 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 500 mm, šírka ložného priestoru: 2 550 mm, zavesenie: iný, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, 70 mm masívna drevená podlaha, 18 upevňovacích ôk, 2 rampy, každá 3 000 mm dlhá a 750 mm široká, hydraulické jednodielne rampy, nakladacia výška: 900 mm. -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie -- Viac informácií na: ! Podpjyu Ut Hsfx Anrjgk

Stav: nový, pohotovostná hmotnosť: 3 740 kg, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 700 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 385/55 R 19,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/55 R 19,5, veľkosť zadnej pneumatiky: 385/55 R 19,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Trojsmerný sklápěč, délka ložné plochy cca 5 700 mm, bočnice vysoké 600 mm, pozinkované, výška ložné plochy při zatížení cca 990 mm, 4x kotevní oko v podlaze – každé na 5 t, 8x kotevní oko v podlaze – každé na 3 t, zesílený převodový podpěrný naviják s provozním a rychloběhem vpředu, široké pneumatiky: 385/55 R 19,5, podvozek: žárově zinkovaný. Příplatek za: Hliníkové rampy (cca 3 520 x 400 mm) – nosnost na pár 10 t a dvakrát sklopné podpěry vzadu. Cena: 1 500 € -- Tiskové chyby, omyly a změny vyhrazeny, ilustrační fotografie -- Více údajů na: !, More Details: ! Pgodeyu Uttepfx Anrok

Stav: použitý, maximálna hmotnosť nákladu: 30 700 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2002, Výbava: ABS, * MüllerMitteltal 4-nápravový nízkozdvižný príves T40 * 2x riadené otočné nápravy * Nemecký príves * pero * hydraulicky posuvné rampy / vľavo-vpravo * delené sklopné rampy * možnosť rozšírenia * ABS * BPW nápravy Pjdpjyuri Eefx Anrjgk * 40 t * vlastná hmotnosť: 9300 kg * zaťaženie na nápravu = 10 t na nápravu * plne funkčný * pneumatiky v poriadku

Stav: použitý, pohotovostná hmotnosť: 8 850 kg, maximálna hmotnosť nákladu: 31 150 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2019, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Celková dĺžka ložnej plochy cca 9.500 mm, dĺžka ložnej plochy hlbokého lôžka cca 7.360 mm, nakladacia výška cca 910 mm, 14 párov kotviacich ôk, vozidlo ponúkané na zákazku. Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie. Viac údajov na vyžiadanie! Psdoy Etl Dopfx Anrogk

Stav: použitý, maximálna hmotnosť nákladu: 48 000 kg, celková hmotnosť: 72 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2026, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 4 000 mm, Rok výroby: 2026, Výbava: ABS, NOVINKA!!! Plně vzduchové odpružení, zdvih první nápravy, zvedací čtvrtá náprava, ŘÍDICÍ NÁPRAVA. Dálkové a manuální hydraulické podpěry. Rozšiřitelná platforma po 25 cm. Hydraulické nájezdy. Zadní hydraulické a manuální podpěry. Nápravy SAF. ROZMĚRY A HMOTNOSTI: Délka vozidla 13 560 mm. Délka krku: Délka platformy: A: 9 000 mm. Kompatibilita s tahačem. Výška platformy (zatížené) 1 000 mm; B: náprava zatížená. Rozvor: H: 1 360 mm. Silo tahová síla. Šířka 2 550 mm; C: hmotnost zatížená. Rozvor: D: 7 595 mm. Pohotovostní hmotnost (± 3 %). TECHNICKÉ ÚDAJE PLATFORMY A POHONU: 3 950 mm, pohon jedné nápravy (4x2 a 4x4), 48 000 kg (4 nápravy x 12 tun), 24 000 kg, 72 000 kg. Rám: Vysoce pevný I-profil, příčníky z kvalitní oceli S355J2+N. 2" královský čep (1 ks). Pozice čepu: 2 ks. Typ labutího krku: pevný, standardně vnitřní. Horní strana rámu/plato: Boky – dřevo, nad nápravami a uprostřed – ocel, labutí krk horní část – ocel. Boční rozšíření: 250 mm + 250 mm. Pozinkovaná upínací oka po stranách (12 t). Otvory na čapy pro kolíky. HLAVNÍ ZNAKY: 265/70 R 19.5. Ocel. 1. a 2. rampa: pevná; 3. a 4. rampa (1. zdvih): Wabco EBS 4S/2M. Typ rampy: hydraulická, zasouvací, jednodílná. Další funkce rampy: zasouvání a vysouvání (hydraulicky). Nájezd u labutího krku: pevná, přenosná rampa. Materiál rampy: dřevo. Podvozek vzadu: manuální zadní podpěry. Podvozek vpředu: dvourychlostní teleskopická převodovka, dynamická nosnost 24 t, statická 50 t. PŘÍSLUŠENSTVÍ A DALŠÍ FUNKCE: 1 náhradní kolo s držákem, 1 klín pod kolo, vhodně dimenzované skříňky na nářadí po stranách platformy (pozinkovaná nebo lakovaná ocel), hliníkové boky a zadní kryty na labutím krku, plastová podložka pod zadním nárazníkem, 1 vyrovnávací stojan (volitelně), plechové bočnice (volitelně), 10t elektrický naviják (volitelně). LAKOVÁNÍ A TRYSKÁNÍ: Tryskání podle normy SA2.5, epoxidová základní barva, dvouvrstvý, vypalovaný akrylátový lak, sériová barva A, volitelný odstín rámu. Pjdpsyn Ux Aofx Anrogk

Stav: použitý, pohotovostná hmotnosť: 8 650 kg, maximálna hmotnosť nákladu: 31 350 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2012, ďalšia kontrola (TÜV): 03/2026, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 550 mm, zavesenie: oceľ, veľkosť pneumatiky: 245 / 70 R 17,5, rázvor náprav: 4 725 mm, farba: oranžová, typ prevodu: iný, veľkosť prednej pneumatiky: 245 / 70 R 17,5, veľkosť zadnej pneumatiky: 245 / 70 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, Základná farba: oranžová Doplnková výbava ABS, odpruženie: listové, užitočné zaťaženie (kg): 31 350 Pgsdpfeyuu Iksx Anrsk Typ nadstavby: Goldhofer 4-nápravový nízkoložný náves T4-2x2-32/80, BPW ECO nápravy s listovým odpružením, rozšírenia, ložná plocha cca 7 000 x 2 550 mm, ložná výška cca 860 mm, mechanická zadná opora, hydraulické nájazdové rampy 2 850 x 700 mm, hydraulický bočný presun, ťažné oje s ťažným okom 50 mm, vzduchová prípojka Duomatik, elektrika 24 V - 2 x 7 pólov, ABS

Stav: použitý, maximálna hmotnosť nákladu: 17 700 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/1994, dĺžka ložného priestoru: 9 400 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 950 mm, celková šírka: 2 480 mm, Celková dĺžka: 11.850 mm Dĺžka ložnej plochy: 9.400 mm vrátane zadného skosenia Šírka: 2.480 mm Pgedpfx Ajy Hn Ebenrek Výška ložnej plochy: 950 mm Ďalšie informácie - 40 km/h - Hydraulické rampy - Oka na upevnenie na vonkajšom ráme - Veľký úchytný balík - Kapsy na zariadenie - Dvojité pneumatiky

Stav: vyžaduje opravu (použité), Funkcionalita: neoverené, farba: zelený, Rok výroby: 2011, Na predaj: SAHN nízkozdvižný príves normálny - 4-osý NOOTEBOOM OVB-90-05V Pgodsy Dgruspfx Anrsk K dispozícii v krátkom čase

Stav: použitý, maximálna hmotnosť nákladu: 39 500 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2010, ďalšia kontrola (TÜV): 12/2026, dĺžka ložného priestoru: 9 345 mm, Rok výroby: 2010, * Müller Mitteltal T50 Kompakt * Nízkozdvižný přívěs * Nájezdové rampy * Pneumatiky: viz fotografie * 5 náprav * Gigant nápravy * Povolená celková hmotnost: 50 000 kg * Pohotovostní hmotnost: 10 500 kg * Užitečné zatížení: 39 500 kg * Vzduchové odpružení * Okamžitě k dispozici * Změny a omyly vyhrazeny Nabízíme: Nákup bez DPH pro firmy z EU s DIČ/VAT číslem a zákazníky ze třetích zemí. Leasing a financování. Kompletní vyřízení veškerých celních formalit. Zajištění krátkodobých a vývozních registračních značek. Pgjdpfx Aoyzlyxenrok Přepravu do přístavu. Všechny ceny uvedené v inzerci jsou cenami včetně DPH (brutto) a obsahují zákonnou DPH ve výši 19 %.

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with raise/lower facility and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal (no truck-side installation required) * SmartBoard as info tool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED rotating beacon (removable), rear ----General attachments: * Warning sign packages front & rear * 2 x tool boxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, mounted on the right side * Closed individual plastic mudguards at the front * Straight steel rear mud flaps, each with spray protection (spray suppression) * Side underrun protection ----Lowbed platform: * Swivel platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. lids, lockable * Flooring made of 50 mm softwood on the swivel platform and 60 mm softwood on the lowbed platform * 20 mm rubber flooring instead of wood in the driving lane area with a lowbed length of 6,780 mm including the drive-on slope * Rubber covering on the drive-on slope, left and right, approx. 860 mm long * 4 stake pockets per side (stakes not included), with 2 t lashing capacity each ----Chassis: * Chassis made of high-strength fine-grained steel ----Load securing (Lasi package): Swivel platform: * 2 pairs of 13.4 t lashing eyes on the outer frame of the swivel platform Lowbed: * 4 pairs per side of 10 t foldable lashing rings on the outer frame, loadable in all directions * 2 pairs per side, rear, of 13.4 t pivoting lashing rings ----Ramps: * Rubber covering on the foldable drive-up ramps * Hydraulic foldable ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3-meter total width (not in the rear slope area) * Widening planks stored in a side compartment on the left ----Excavator arm recess: * Excavator arm recess above the rear axle up to the end of the drive-on slope, approx. L=2,100 mm x W=740 mm x D=190 mm * 2 pairs of 6.4 t lashing rings on the sides in the excavator arm recess ----Hydraulics: * Hydraulic flow divider in the trailer (when hydraulic pump output in the truck is over 40 - max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm drive-on slope) * Loading area above turntable: approx. 2,990 x 2,520 mm Pgodpfx Aneylfvmerek ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Contour tape on sides and rear, reflective * Chassis, swivel platform, drive-up ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may include special equipment ----Delivery time: * Vehicle available approx. from KW 23/2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes Pgjdpfxjylfvgj Anrjk ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 26 500 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 450 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, WIESE 3-axle low-loader with ramps and wheel recesses? NEW Available approx. 4 months after order ---Vehicle Data--- Manufacturer: WIESE * Model: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth wheel load: 12,000 kg * Axle aggregate load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brake: WABCO EBS with RSS ---Dimensions--- * Loading platform length: 13,450 mm * Low-bed length: approx. 9,550 mm * Fifth wheel section: approx. 3,640 mm * Overall width: 2,550 mm * Loading height at low-bed: approx. 920 mm * Fifth wheel height: approx. 1,250 mm ---Equipment--- * 3 x SAF axles (9 t) with air suspension * 1st axle: lift axle * 3rd axle: trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS braking system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin socket + 2 x 7-pin sockets ---Body--- * Robust steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings (8,000 kg) * Additional lashing points (5,000 daN) * 2 pairs of wheel recesses * Excavator trough * Aluminium plug-in side boards on upper deck * Toolbox at the front ---Ramps--- * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting mechanism * Laterally adjustable Psdeyuq Igspfx Anrjgk ---Miscellaneous--- * Warning panels for over-width up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV inspection certificate We are happy to provide further information upon request.

Stav: ako nová (výstavný stroj), pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 30 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 4x2, dĺžka ložného priestoru: 9 220 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17,5, Rok výroby: 2025, Výbava: ABS, prípojné zariadenie, stredová otočná doska, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Gross vehicle weight: 24,000 kg Payload: approx. 14,000 kg Psdpfxsiciuto Anrjgk Tyres: 235/75R17.5 inch Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Gross weight special version: 40,000 kg Payload special version: approx. 30,000 kg Lowbed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical gross weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the lowbed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/rave pockets, 3 t, in the outer frame of the raised bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/rave pockets, 3 t, in the outer frame of the lowbed Suspension: Air suspension system including lifting and lowering, acting on the rear axle assembly Braking system: Braking system in accordance with EC directives with EBS 4S/3M, multi-voltage (12-24V), spring-loaded parking brake including two external test connections for brake/modulator and airbag pressure Electrics: Lighting system in LED design with indicator function for side marker lights, multi-voltage (12-24V) Turntable: Heavy-duty welded construction with low-maintenance ball bearing slew ring Drawgear: Cranked drawbar with Ø 50 mm towing eye, low-maintenance Silent bushings, including height adjustment for the drawbar Frame: Heavy-duty welded construction made of high-strength fine-grained steel with continuous crossmembers for maximum stability. Wheel recesses at the front (length at top approx. 2,500 mm - depth approx. 410 mm) and at the rear (length at top approx. 1,470 mm - depth approx. 370 mm); without wheel recess covers. Excavator recess (length 1,650 mm, width 750 mm, depth 190 mm). Wheel cut-outs above the rear wheels with wheelbase of 2,010 mm; front corners chamfered; climbing strips on the rear loading ramp for maximum safety during loading and unloading. 4 pairs of rave pockets (90x50 mm) in the outer frame - raised bed; 1 pair of rave pockets (90x50 mm) in the outer frame - lowbed Floor: 50 mm softwood flooring (painted/impregnated) Ramps: Single-piece, hot-dip galvanized loading ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable, directly acting vertical spring loaders for effortless operation Finishing: Chassis frame hot-dip galvanized by immersion Supports: 2 folding supports at the rear left and right at the rear of the vehicle Equipment: Folding side underrun protection, front half-round plastic mudguards, rear straight steel mudguards with antispray. 2 wheel chocks with holders; contour marking according to ECE regulation R48 Wheel recess covers front: with 3 pairs of rave pockets, without covering (covers retractable under the longitudinal beams), 975.00888 Hardwood covering for front wheel recess cover. Wheel recess covers rear: with 1 pair of rave pockets, without covering (covers retractable under the longitudinal beams), 975.00897 Hardwood covering for rear wheel recess cover. 3 pairs of 6 t lashing rings, bolted 3 m outfitting package, without slope, B = 11,200 Folding outriggers with softwood planks, 970.04199-36 LED warning package HTD, cranked Aspöck warning boards, 4 units, electrics and rotating beacon 1 pair o

Stav: použitý, maximálna hmotnosť nákladu: 25 750 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 01/2005, celková šírka: 2 550 mm, celková výška: 3 600 mm, Výbava: ABS, Goldhofer 2-nápravový nízkopodlažný náves * Gigant nápravy s bubnovými brzdami * Vzduchové odpruženie Pgjdpfx Aoyn Tu Ajnrek * Riadené nápravy * Výstražné majáky * Pracovné reflektory * Pneumatiky 235/75 R17,5 Upozornenie: Vozidlo bolo v roku 2025 repasované. Novo nalakované a technika kompletne prepracovaná. Pre ďalšie informácie sme vám k dispozícii.

Stav: použitý, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 48 650 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you will receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with bevel approx. 1,000 mm x 10° Loading deck: - Telescopic loading deck, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - Recess in the loading deck, including into the bevel, for accommodating the excavator dipper stick Ramps: - 1 pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Each ramp can be hydraulically shifted approx. 235 mm outwards and approx. 215 mm inwards - Square anti-slip bars 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles with hydromechanical forced steering - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Tires: 235/75 R 17.5 - TPMS tire pressure monitoring system Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling the hydraulic functions, excluding hydraulic cable winches - Parking position on the gooseneck for warning boards when not in use - 1 spare wheel - Outer side rail of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear wall, approx. 400 mm high, anodized - Over the gooseneck approx. 40 mm thick hardwood floor, over the kingpin checker plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - Round NATO socket on the front connection panel - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - Continuous 50 mm hardwood flooring on the loading deck, interrupted between the axles - Deck locking using conically welded locking profiles every 250 mm - Incl. pre-tensioning plate - 1 intermediate table, approx. 300 mm wide, for the telescopic tubes with large cross-section; intermediate table with stepped deck and extendable support rails for ALU bridging elements - 1 pair of lashing rings on the front cross-member - 8 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward - Extendable (galvanized) deck widenings approx. 230 mm per side Podpfoyrfn Nex Anrogk - Wheel recesses with square anti-slip bars, 15 x 15 mm, continuously open in front of the axles up to the gooseneck cross-member, approx. 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging or widening planks for the telescopic section - ALU elements lockable on the telescopic tubes of the extensions - Widenable U-profiles for holding ALU covers - Wheel recesses with square anti-slip bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning boards, approx. 423 x 423 mm - Radio and cable remote control

Stav: použitý, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2024, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, Rok výroby: 2024, Výbava: ABS, For every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Gooseneck rear with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the platform and in the bevel to accommodate the excavator bucket stick - Pneumatic locking system with conical locking bolts and reinforced locking positions - Hardwood covering on the platform bevel Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 215 mm inwards - 20 x 30 mm square climbing bars at intervals of approx. 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle self-steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension - Tires 235/75 R 17.5 - TPMS tire monitoring system - TPMS tire monitoring sensors Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic functions - 1 spare wheel - Outer beam on the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, thereafter approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of flat lashing rings in the rear area of the gooseneck - On the gooseneck 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized Pgodpfxoypb Ake Anrsk - On the gooseneck, one plug-in ALU rear board, approx. 400 mm high, anodized - 2" king pin - Round NATO socket on the front connection rail - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable (galvanized) extensions by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, continuously open in front of the axles up to the crossmember of the gooseneck, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminum elements mounted on the extension tubes of the widening sections - Widenable U-profiles for placing the ALU covers - Wheel recesses with square climbing bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminum elements mounted on the extension tubes of the widening sections - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote, with single-track axle monitoring - 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 - Under the gooseneck and on the rear crossmember left and right, each with a 7-pin socket with bracket for warning plates - Square climbing bars 20 x 30 mm, approx. every 200 mm on the outer frame of the platform bevel - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for remote steering operation, in addition to cable remote - Wabco Smart Board System - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, maximálna hmotnosť nákladu: 31 920 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Type VTS 400 Pgedpfx Anexrx Nljrok Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Overall length: 11,940mm Loading length: total approx. 10,410mm, gooseneck approx. 2,490mm, loading area incl. rear chamfer approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional Information plus pre-carriage / provision ex yard 26639 Wiesmoor €1,280.00 / net Chassis low loader trailer Steel welded construction Turntable with robust ball race ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on axles 1 and 2 with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind axles 3 and 4 Excavator stick trough above rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in excavator trough on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before rear slope 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Storage box on the gooseneck, flush-mounted with lid, W=720 mm / L=520 mm / D=170 mm Extendable load width to 3,000 mm (not in rear slope) (Note: Track width of machines/vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber beams underneath the low loader deck 70 mm timber beams for extension to 3,000 mm Low loader lashing points 1 pair tie-down cutouts in the longitudinal beam front, integrated in gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for securing straps) 9 pairs of lashing mushrooms, top and side mounted in outer frame, each 10 t 2 x on the gooseneck 7 x in the low bed area First tie-down point 250 mm from front and last max. 250 mm from rear, spacing not greater than 1,100 mm 3 additional pairs of folding lashing rings, each 10 t 1 x on gooseneck (protruding) 1 x at start of low bed, integrated in longitudinal members 1 x behind last axle, integrated in floor Trailer coupling device, turntable Drawbar with tested 50 mm towing eye Drawbar height adjustable via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension with raise & lower valve + auto-reset function Wheels and tyres 235/75 R 17.5" manufacturer’s choice Steel rims, dual configuration, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, for display in the cab (truck must be pre-equipped, no truck installation/no calibrated scale) Vehicle – Driving Stability System 2 anti-mix-up coupling heads at the front with connecting lines to the towing vehicle 12-24 Volt EBS, electronic braking system with EBS plug at front and connection cable Brand: Knorr Note: This trailer may only be towed by vehicles ensuring the effectiveness of the ABS! Electrics 12-24 Volt, multi-chamber LED lights, side yellow LED marker lights, number plate in LED (Note! With some towing vehicles, incorrect diagnostics may occur despite functioning properly) 2 front white position lights in LED 2 white/red lane marker lights at rear in LED 2 x 7-pin anti-mix-up plugs at front with connecting cable 1 LED beacon light with holder, switched via parking light (removable lamp)

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg Pedpfx Ask Aht Usnrogk - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 13 500 kg, maximálna hmotnosť nákladu: 51 500 kg, celková hmotnosť: 69 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading platform length; length approx. 3,700 mm. Gooseneck rear bevel approx. 1,000 mm x 10°. Loading platform: Telescopic loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°. Recess in the bevel as well as extending into the loading platform to accommodate the excavator's bucket linkage. Pneumatic locking with conical bolt and reinforced lock positions. Supply lines are protected within the telescopic beam and adapt to the respective platform length. Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm. Hydraulically folding ramp tips. Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward. Axles and suspension: BPW axles and suspension, two rigid axles, two self-steering axles. Electromagnetic reverse lockout, activated via reverse gear and manually. Air suspension with raise/lower valve. Axle tools. Tyres: 235/75 R17.5 3PMSF, dual-mounted. Load index: 143/141J (144/144F). Braking system: WABCO brand braking system, EBS-E, compliant with EU regulations. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED." Metal finishing: Standard HRM metallization of the outer frame. Complete steel structure shot-blasted, then all defined visible surfaces hot-coated with ZINACOR 850 (zinc 85% - aluminum 15%). Steel structure: Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified to DIN-EN 287-1. MAG welding method according to EN ISO 4063. Protective gas M21 according to EN ISO 14175. Standard accessories included: Removable front wall, steel, height approx. 400 mm. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, & 15-pin sockets. Pgjdpfx Aok Ahugonrjk 24N connection per ISO-118524S connection per ISO-373115-pin connection per ISO-12098. Round NATO socket at the front connection strip. Power cable for supplying the electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and truck tractor with connector (NATO-NATO). 3 kW electro-hydraulic unit for operating hydraulic functions, except hydraulic winches. 1 spare wheel with mounting adapter. External beam of gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included. Fixing hole at the upper rear of the gooseneck external beams for a bolted lashing ring. 1 pair of screw-in lashing rings. Approx. 40 mm thick hardwood flooring over the gooseneck. On the gooseneck, 1 pair of removable, anodized aluminum sideboards, approx. 400 mm high. On the gooseneck, 1 removable anodized aluminum rear wall, approx. 400 mm high. 2” king pin. Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide. 4 wheel chocks with holders. Mount for aluminum approach ramps. Mechanical landing legs with 2-speed gearbox and crank. Approx. 50 mm hardwood floor, continuous on the platform and interrupted between the axles. Platform locking with conically welded locking profiles every 250 mm, including pre-tensioning plate. Long holes at the front of the loading platform for hook-in and relocatable bridging elements. 1 intermediate table with recessed platform, approx. 300 mm wide for the extension tube with large cross-section with steel covering. Front and rear with long holes...

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) Pjdsl Uxdkopfx Anrogk ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container Pgodpfsh Etf Rex Anrek - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 9 650 kg, maximálna hmotnosť nákladu: 30 350 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 740 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17,5 zoll, Rok výroby: 2026, Výbava: ABS, stredová otočná doska, 4-AXLE LOWBED TRAILER WITH TOP-LEVEL EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, TURNTABLE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS ON THE REAR OF THE ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR SHOVEL WELL AT THE REAR END => LONG ONE-PIECE ACCESS RAMPS => SHALLOW RAMP ANGLE Perm. Gross Weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Turntable frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension SAF axle with drum brakes EBS - Electronic Braking System Tires: 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Excavator stick recess approx. 3,000 mm x 730 mm x 180 mm at rear lowbed Pgjdpfx Ashvxgzonrek 4 pairs of 10 t recessed lashing rings in the lowbed 2 pairs of 10 t recessed lashing rings in the highbed 4 pairs of 3 t lashing points on lowbed outer frame 3 pairs of 6 t lashing eyes on outer frame 4 pairs of stake pockets on highbed outer frame 4 pairs of stake pockets on lowbed outer frame 3-meter widening package with fold-out extensions (no taper) 4 x warning boards with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading area 2 storage compartments with hinged lids in the high platform Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood flooring on loading area and ramps 40,000 kg gross weight only with special permit according to §70 => Delivery freight: €2.90 plus VAT per km => All prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sales only to commercial customers!* *Pictures may differ and are for general guidance only => may show/contain optional accessories subject to surcharge*

Stav: nový, maximálna hmotnosť nákladu: 31 920 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Nové vozidlo Fliegl nízkoložný príves so 4 nápravami a nájazdovými rampami, typ VTS 400 Celková hmotnosť: 24 000 kg / 40 000 kg Pohotovostná hmotnosť: 8 080 kg Užitočné zaťaženie: 15 920 kg / 31 920 kg Celková dĺžka: 11 940 mm Nakladacia dĺžka: celkom cca 10 410 mm, znížená časť cca 2 490 mm, ložná plocha vrátane zadného skosenia cca 7 920 mm Šírka: 2 550 mm Nakladacia výška: 900 mm Ďalšie informácie Príplatok za dopravu / prípravu zo skladu 26639 Wiesmoor: 1 280,00 EUR bez DPH Leasingová ponuka: doba trvania 48 mesiacov, akontácia len DPH, zostatková hodnota 40 % mesačná splátka: 759,00 EUR Podvozok nízkoložného prívesu Oceľová zváraná konštrukcia Otočný čap s robustným ložiskovým krúžkom Skopné zadné podpery 2 zakladacie kliny s držiakom Bočná ochrana z hliníka Zadná blatníková lišta po celej šírke Polovičné blatníky na 1. a 2. náprave s protišpliechacími zásterkami za každou nápravou, protišpliechacie zásterky pred a za 3. a 4. nápravou Výrez pre násadu bagra nad zadnými nápravami až po koniec prívesu, cca 1 800 mm dĺžka, cca 650 mm šírka a cca 150 mm hĺbka 2 páry zaťažovacích otvorov po 5 t v priestore na násadu bagra po bokoch pozdĺžneho rámu, cca 300 mm odpredu a cca 200 mm pred zadným skosením 1 plastový uzamykateľný náradový box, š=600 mm / v=425 mm / h=460 mm Skladovací box v zníženej časti podlahy s vekom, Š=720 mm / D=520 mm / H=170 mm Rozšírenie vysúvateľné na 3 000 mm (nie v zadnom skosení) (Rozchod prepravovaných stavebných strojov resp. vozidiel nesmie prečnievať cez vonkajšiu šírku rámu 2 550 mm) Úložný priestor na drevené hranoly pod ložnou plochou Drevené hranoly 70 mm pre rozšírenie na 3 000 mm Kotviace oká na nízkoložnom prívesu 1 pár kotviacich výrezov vo vnútornom nosníku vpredu (znížená časť), každé po 10 t 4 páry otvorov na vonkajšom ráme, každé po 5 t (uchytenie napínacích pásov) Pjdpsvv D Ixsfx Anrsgk 9 párov kotviacich húb zvrchu a zboku vo vonkajšom ráme po 10 t 2 × vpredu na zníženej časti 7 × v ložnej časti Prvé kotviace oko 250 mm odpredu, posledné max. 250 mm odzadu, rozstup nie väčší ako 1 100 mm 3 páry výklopných kotviacich ôk navyše, po 10 t 1 × na zníženej časti (vystupuje) 1 × začiatok ložnej plochy vnútri pri nosníkoch 1 × za poslednou nápravou v podlahe Ťažné zariadenie pre príves s otočným čapom Ťažná tyč so schváleným 50 mm ťažným okom Nastavenie výšky ťažnej tyče cez pružinu Nápravy a odpruženie Bubnové nápravy podľa výberu výrobcu „Nápravy/podvozok laserovo zmerané" – znižuje opotrebenie pneumatík a spotrebu paliva Vzduchové odpruženie so zdvíhacím a znížovacím ventilom + automatická resetovacia funkcia Kolesá a pneumatiky 235 / 75 R 17,5" podľa výberu výrobcu Oceľové disky v dvojmontáži, výrobná strieborná farba Brzdový systém Dvojokruhový vzduchotlakový brzdový systém Pružinová parkovacia brzda Detekcia zaťaženia nápravy cez EBS-Canbus signál, pre zobrazenie na displeji v kabíne vodiča, nákladné vozidlo musí byť príslušne pripravené, nie je nainštalované v LKW (nie je overená váha) Systém stability jazdy vozidla 2 zameniteľné spojovacie hlavy vpredu s prepojovacími vedeniami k ťažnému vozidlu 12-24 Volt EBS, elektronický brzdový systém s EBS konektorom vpredu a prepojovacím káblom Značka Knorr Pozor: Príves sa smie ťahať len ťažnými vozidlami, ktoré zabezpečujú funkciu ABS! Elektrická výbava 12-24 Volt, viackamrové LED svetlá, na bokoch žlté LED osvetlenie, LED osvetlenie ŠPZ (Poznámka! Pri niektorých ťažných vozidlách môže dochádzať k chybným hláseniam, aj keď funkcia je zabezpečená) 2 biele pozičné sve

Stav: nový, maximálna hmotnosť nákladu: 31 100 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Overall length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading bed including rear slope Width: 2,520 mm Loading height: 900 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 / net Steel welded construction Turntable with robust ball race Foldable rear support stands Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift holder) Pgjdporducpsfx Anrsk Half-shell mudguards 1st & 2nd axle with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axle Digger boom trough over the rear axles, starting to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes each rated 5 t in the digger trough, located on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box recessed in the floor at the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm Extendable widenings to 3,000 mm (not in rear slope area) (The track width of construction machinery or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Storage compartment for timber planks beneath the low-bed area 70 mm timber planks for widening to 3,000 mm Low loader lashing eyes 1 pair tie-down cutouts embedded in the main beam at the front of the gooseneck, each 10 t 4 pairs lashing holes in the outer frame, each 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed in/outside the outer frame, each 10 t 2x located at the front on the gooseneck 7x in the low deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 3 additional pairs of folding lashing eyes, each 10 t 1x on the gooseneck (protruding) 1x at the beginning of the low bed, inside the main beams 1x behind the last axle, recessed in the floor Towing device for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment by spring Axles & suspension Drum brake axles, manufacturer’s choice “Axles/chassis laser-aligned” to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation, front and rear (equalizer balancing) Wheels and tires 235/75 R 17,5”, manufacturer’s choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connections to the tractor unit 24 Volt ABS and ALB, with ABS plug at the front and connector cable Attention: The trailer may only be towed by vehicles that ensure the ABS is effective! Electrics 12–24 Volt, multi-chamber LED lights, side yellow LED lights, LED license plate light (Note! On certain towing vehicles, false diagnostics may occur despite full functionality) 2 white front position lights in LED 2 white/red lane marker lights rear in LED 2 x 7-pin non-interchangeable plugs at the front, with connector cable 1 LED beacon with bracket, controlled via parking/side light (removable beacon) 2 pairs of double warning panels, LED illuminated and extendable up to 3,000 mm Floor Gooseneck with steel chequer plate covering Followed by approx. 70 mm softwood flooring, steel cheque

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS Pedswmpbdjpfx Anrjgk - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!