Müller-Mitteltal Mueller Tandem Etue-Ta-Er 11,9 kúpiť použité (37 458)

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT veľmi dobre udržiavaný tandemový plošinový príves ZANDT Cargo * TAT B 110 * plošina * zosilnená drevená podlaha * uchytenia pre ťažké náklady * tandem s 2 nápravami * široké pneumatiky Kdodpfx Aoymuz Ismiol * nastaviteľné oje * celková prípustná hmotnosť 11.900 kg * veľmi dobrý stav Možná výmena protiúčtom Financovanie od 3,99 % Možné chyby a predaj vopred vyhradený! Údaje v tomto inzeráte sú nezáväzné popisy a neslúžia ako zaručené vlastnosti. Predajca nepreberá žiadnu zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné overiť samostatne. Všetky údaje v inzerátoch sú nezáväzné! Doručenie po celom Nemecku na požiadanie Otváracie hodiny: Pondelok až štvrtok 9:00-17:00 Piatok 9:00-14:00 a po dohode!!!

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem Low Loader | Drive-over Flatbed Trailer Reference No. for inquiries: 27963, available end of March 2026 NEW VEHICLE incl. COC * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Available at the end of March 2026 Kdjdpfx Aeyuq R Uomiol * Flatbed version with 400 mm high front wall, ramp safety via ramp holding rods and angled supports * Version GG 21 t with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm (loaded) / approx. 940 mm (unloaded) * 7,000 mm loading platform with 400 mm high front wall * Extended ramps: 3,000 mm, one-piece hot-dip galvanized ramps with galvanized grating * Ramp lifters with vertically mounted, adjustable springs for easy single-person operation * Load-securing package: - 4 UVV drop lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the 45° outer frame, located approx. 1 m from the front and rear cross members - 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid in the outer frame - 2 UVV recessed lashing rings at front + rear cross member (LC 10,000 daN) * Additional lashing options through holes (Ø 50 mm, LC 1,200 daN) in the front and rear cross members * Pre-fitted for retrofitting container locks * 50 mm thick softwood floor * Gigant axles with air suspension incl. EBS 2S/2M, * Raise and lower function * 235/75R 17.5 (8 units) twin tires with tire pressure monitoring sensor * 1 plastic toolbox in front of the front wall on the right-hand side in the direction of travel * LED lighting system * 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Wide load warning board * 1 removable LED beacon incl. holder and installation * Folding supports at the rear, front support with gear-operated winding mechanism ---- Hire-purchase example via our partner MMV Leasing: €655/month net with 60 months term, no down payment, and €0 residual value Other terms with/without down payment/residual value possible! We are an official Müller-Mitteltal dealer ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of these hours, appointments are possible by arrangement We speak German, English, Russian, Polish, French Leasing, financing, and trade-in available

Stav: použitý, pohotovostná hmotnosť: 3 650 kg, maximálna hmotnosť nákladu: 10 750 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2011, ďalšia kontrola (TÜV): 08/2024, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 900 mm, zavesenie: vzduch, veľkosť pneumatiky: 285/70R19.5, farba: biely, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, 2 axles, tandem, air suspension, ABS (anti-lock braking system), tailgate, lashing eyes, underrun protection, front support, rear support, swinging tailgates, height-adjustable drawbar. Bodywork: Tandem three-way tipper trailer with aluminium side walls, 2x Gigant axles, drum brakes! Kodpfx Asth Uavjmisdl Loading ramps available at an extra net price of €990.00! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Stav: nový, maximálna hmotnosť nákladu: 10 970 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, KA-TA-R 14,4 - Tandemový trojstranný sklápací príves pre nákladné vozidlá - Užitočná nosnosť v sérii cca: 11 050 kg - Zvýšenie celkovej hmotnosti na 14,4 t s pneumatikami 285/70R19.5 - Vnútorné rozmery: 5 000 x 2 420 x 500 mm - Výška ložnej plochy pri zaťažení: 1 040 mm Kdodsxmwiyepfx Amiol - 1 podvozok s podbehovou ochranou, žiarovo pozinkované prevedenie - Lakovanie: nápravy s pružinami, vzdušník atď. v odtieni čiernej - 3 páry zapustených, vyklápacích viazacích ôk v oceľovej podlahe, LC 3 000 daN - ABS 2 S/2 M, 24 Voltov - 2 zdvíhacie pružiny pre bočnice z ocele s výškou 500 mm - 1 centrálny zámok vľavo a vpravo, výkyvný pri delených bočných stenách Doplnková výbava: 1 pár UVV viazacích krúžkov zapustených v oceľovej podlahe namiesto na povrchu podlahy 1 oceľová podlaha Hardox 450, hrúbka 4 mm Nastavenie výšky ťažného oka cez uhlovou prevodovku s kľukovým ovládaním namiesto štandardu 1 pár nájazdových rámp z hliníka bez okrajov (8,0 t/pár), 3 500 x 400 x 105 mm vhodné pre kolesové aj pásové vozidlá Box na náradie

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards Kedpfx Ajl Thyxemisdl ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: Kodpjxf Skpsfx Amiodl * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade Kdedpfx Amoxf Skvsiel ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: Kdodpfx Amol Thymoiel * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: použitý, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2018, dĺžka ložného priestoru: 5 060 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2018, MUELLER MITTELTAL Príves (SKLÁPAČ) 5,06 m Dovezené / BEZ HAVÁRIE VO VEĽMI DOBROM STAVE! ? ROK VÝROBY: 2018 VZDUCHOVÝ PODVOZOK ROZMER PNEUMATÍK: 385/55R19,5 ROZVOR KOLIES: 115 PLOŠINA: 506 x 242 x 50 m CELKOVÁ HMOTNOSŤ: 13 500 kg NOSNOSŤ: 6 350 kg TEL: KUBA – POĽSKY, ANGLICKY, NEMECKY, TALIANSKY SEBASTIAN – POĽSKY, NEMECKY, TALIANSKY, ????? LASZLO – MAĎARSKY COSTEL – RUMUNSKY? (Vybavíme všetky formality na export vrátane čísla) RADEK – ????? Kdodpjy E Ecnefx Amijl

Stav: použitý, pohotovostná hmotnosť: 5 750 kg, maximálna hmotnosť nákladu: 24 250 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1993, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Kdedpfx Amsy Ifhveiol

Stav: nový, maximálna hmotnosť nákladu: 10 400 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * ETK-TA-R 14,4: ----Brzda: * EBS * Núdzové uvoľňovanie pre pružinové brzdové valce * Bubnové brzdy ----Náprava: Ksdpfx Aetr Sucomijdl * 2 x 7 t Gigant nápravy ----Pérovanie: * Parabolické perá s tandemovým vyrovnávacím agregátom ----Ťažné oko / Ťažná tyč: * Výškovo nastaviteľná ťažná tyč o 300 mm s 40 mm prírubovým ťažným okom ----Elektrika / Osvetlenie: * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v nákladnom aute cez EBS signál, bez potreby inštalácie na strane nákl. vozidla * 15-kolíková elektrická zásuvka * LED koncové svetlá ----Všeobecné prídavné diely: * Mechanický podperný zdvihák vpredu * 2 mechanické sklopné podpery vzadu * Plastová náradová skrinka cca 750 x 350 x 300 mm na pravej strane * Skrutkovaný ochranný rám proti podbehnutiu * Plastové štvrť-blatníky ----Rám: * Hlavný rám z jemnozrnnej ocele ----Sklápacia plošina: * Sieťové háky po bokoch a v zadnej časti v ložiskách centrálneho zamykania, ako aj 2 ks na čelnej stene * Oceľová paletová dvojstranná sklápačka – čelná stena pevná z hladkého plechu, bočné steny s nepretržitou dĺžkou – bez stredových stĺpikov sklápateľné s pomocným zdvihom bočnice a kyvné cez manuálne centrálne zamykanie * Zadné stĺpy skrutkované * Oceľová zadná stena zasunutá pred rampy * V každom rohu 1 x 5 t upevňovacia oka a na každej strane v vonkajšom ráme 4 x 3 t upevňovacie oka * 4 mm podlaha z jemnozrnnej ocele ----Rampy: * Dvojdielne mechanické rampy z mriežkovej ocele s hliníkovou špičkou 2.150 + 1.300 mm x 600 mm (manuálne zložiteľné na 80 mm) ----Lakovanie: * Podvozok, ťažná tyč, zadné stĺpy, ochrana proti podbehnutiu, mechanické podpery a nájazdové rampy pozinkované * Nápravy, perá, vzduchové nádrže, prírubové ťažné oko a zdvihák nalakované v čiernej farbe * Bočné steny a plošina v RAL 9010 čistá biela * Lakovanie bočných stien a sklápacej plošiny v inom RAL odtieni za príplatok možné ----Informácie: * Nové vozidlo so zárukou výrobcu * Zmeny, omyly a medzipredaj vyhradené ----Doba dodania: * dostupné od 7. kalendárneho týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 10 400 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * ETK-TA-R 14,4: ----Brzda: * EBS * Núdzové uvoľňovanie pre pružinové brzdové valce * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy ----Pérovanie: * Parabolické perá s tandemovým vyrovnávacím agregátom ----Ťažné oko / Ťažná tyč: * Výškovo nastaviteľná ťažná tyč o 300 mm s 40 mm prírubovým ťažným okom ----Elektrika / Osvetlenie: * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v nákladnom aute cez EBS signál, bez potreby inštalácie na strane nákl. vozidla * 15-kolíková elektrická zásuvka * LED koncové svetlá ----Všeobecné prídavné diely: * Mechanický podperný zdvihák vpredu * 2 mechanické sklopné podpery vzadu * Plastová náradová skrinka cca 750 x 350 x 300 mm na pravej strane * Skrutkovaný ochranný rám proti podbehnutiu * Plastové štvrť-blatníky ----Rám: * Hlavný rám z jemnozrnnej ocele ----Sklápacia plošina: * Sieťové háky po bokoch a v zadnej časti v ložiskách centrálneho zamykania, ako aj 2 ks na čelnej stene * Oceľová paletová dvojstranná sklápačka – čelná stena pevná z hladkého plechu, bočné steny s nepretržitou dĺžkou – bez stredových stĺpikov sklápateľné s pomocným zdvihom bočnice a kyvné cez manuálne centrálne zamykanie * Zadné stĺpy skrutkované * Oceľová zadná stena zasunutá pred rampy * V každom rohu 1 x 5 t upevňovacia oka a na každej strane v vonkajšom ráme 4 x 3 t upevňovacie oka * 4 mm podlaha z jemnozrnnej ocele ----Rampy: * Dvojdielne mechanické rampy z mriežkovej ocele s hliníkovou špičkou 2.150 + 1.300 mm x 600 mm (manuálne zložiteľné na 80 mm) ----Lakovanie: * Podvozok, ťažná tyč, zadné stĺpy, ochrana proti podbehnutiu, mechanické podpery a nájazdové rampy pozinkované * Nápravy, perá, vzduchové nádrže, prírubové ťažné oko a zdvihák nalakované v čiernej farbe Kjdpfetr St Ujx Amisdl * Bočné steny a plošina v RAL 9010 čistá biela * Lakovanie bočných stien a sklápacej plošiny v inom RAL odtieni za príplatok možné ----Informácie: * Nové vozidlo so zárukou výrobcu * Zmeny, omyly a medzipredaj vyhradené ----Doba dodania: * dostupné od 7. kalendárneho týždňa 2026

Stav: použitý, maximálna hmotnosť nákladu: 6 800 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 04/2026, Müller-Mitteltal KWH 9.9 ML Cable Transport Trailer with Diesel Engine * Model: KWH 9.9 ML * Drum brake system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic leaf springs * Rear square tube supports with spring assistance, base plate, and safety locking pins for adjustable support heights * Drawbar with 40 mm or 50 mm bolt-on towing eye (height adjustable) * Bracket for additional drawbar mounted on the right side of the towing device in the driving direction * Chassis made of torsion-resistant square tubing and cross beams * Plastic toolbox * LED lighting * Swiveling cable drum frame consisting of base frame, rotary bearings, and drum carrier arms * Carrier arm ends with locking closure for securing the drum shaft * Central claw lock secures the swiveling cable drum frame to the chassis * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * For drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulically operated pull and push cylinders with load holding valve * Control valve with automatic neutral position and pressure relief valve * Connectors, hoses, and pipes of hydraulic system NW 13 * Required oil capacity approx. 10 liters * Drum drive is motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic power unit with diesel engine and hand starter, 6.5 HP with gear pump (150 bar) Kjdpfxjy R Ipne Amiedl * Pressure supply by switching the connection lines can be provided either by truck hydraulics or power unit * Weather protection cover, hot-dip galvanized without top coat * Tires: 315/80 R22.5 Subject to prior sale and errors! Sale exclusively according to our terms and conditions. Important note: Despite careful verification of all details in our offer, errors may occur. Some may be caused by transfer errors in the systems of different platform providers. Therefore, please note that all information is given without obligation and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for contract initiation. All details provided are without guarantee and do not represent warranted characteristics.

Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-ER 19.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange eye: * Drawbar with 50 mm flange eye and height adjustment by 110 mm using offset plate ----Electrics / Lighting: * RDÜ tire monitoring system * 15-pin power connector * LED rear lights 12 / 24 volts ----General attachments: * Jost landing gear, front * Outward folding rear support legs * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * Reinforcement package for drill rig transport on the chassis Kdsdpfx Amjmi Tmaoisl * 50 mm softwood floor, clamped design * Fixture in front of the bulkhead for subsequent installation of container locks * Bolted smooth plate front wall * Split side walls of steel plate – trapezoidal profile – foldable, with folding stake in the middle * Steel rear wall, slide-in between ramps – storage brackets for non-use inside ahead of bulkhead * Rear stakes bolted ----Load securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm * Provision for 3 t folding lashing brackets every 600 mm * Load securing package: in front and rear corners 1 x 10 t UVV lashing point each, on both sides 2 x 8 t UVV retractable lashing rings in the outer frame, various boreholes in front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece sliding ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75 R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, air tanks, flange eye, and landing gear painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and intermediate sale subject to change ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring actuators * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange towing eye: * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate ----Electrics / Lighting: * RDÜ tyre monitoring system * 15-pin electric connector * LED tail lights 12/24 Volt ----General attachments: * Jost landing gear at front * External folding support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm on right side * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation in front of bulkhead for retrofitting container locks * Bolt-on bulkhead made from flat sheet steel * Split steel sheet side walls, trapezoidal profile, foldable with mid-mounted drop-in stanchion * Steel rear wall, slide-in between the ramps; storage during non-use inside in front of bulkhead * Bolt-on rear stanchions ----Load securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t drop-in lashing rings every 600 mm * Lashing package: at front and rear corners each 1 x 10 t UVV lashing ring, at each side 2 x 8 t UVV retractable lashing rings in outer frame, various holes in bulkhead and rear crossmember for 1.2 t lashing points ----Ramps: * One-piece slide-in ramps 12 t/pair, ramp size approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading height: Ksdpfx Amomi Tcqjijdl * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, support legs, and access ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and landing gear painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Ksdpfx Amsrwc R Rjijdl * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with indication in the truck via EBS signal (no installation required on truck side) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent mounting of container locks * Bolted 400 mm bulkhead made of smooth sheet * Bolted rear stakes * Drop sides with spring lifting assist ----Load securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 6.3 t lashing ring * Various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail in the longitudinal axis, center-mounted, for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating access ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l/min, up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black * Drop sides painted in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery time: * Immediately available ex works Egtsdorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: Ksdpforwc R Aex Amijdl * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18,0: * 2-in-1: Suitable for roll-off containers and as a low loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm draw eye and height adjustment ----Electrics / Lighting: Kedpfx Aol Tq Nmomisdl * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Folding A-sign at the rear ----Loading Platform: * Main frame with raised outer frame for guiding roll containers * Steel sheet floor with wheel recesses in the bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-point locking and mechanical plug-in stop angles at the front of the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the inclined ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front of the bulkhead support * 3 pairs of 10 t UVV lashing rings laterally in the outer frame * Each side: 4 x 2 t lashing eyes in cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Paintwork: * Chassis, bogie, locking parts and rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black tone ----Information: * New vehicle without initial registration, full manufacturer’s warranty * Subject to errors and prior sale * Example images ----Delivery Time: * Available from approx. calendar week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-bed trailer ----Braking System: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, plus RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and adjustable height ----Electrics / Lighting: * Tire pressure monitoring with indicator in the truck via EBS signal (no truck-side installation required) * LED tail lights, 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection Kodpfxjl Tpc Aj Amiedl * Plastic quarter mudguards with spray suppression * Plastic rear impact protection buffers * Rear foldable "A" sign ----Loading Area: * Main frame with raised outer rails for roll container guidance * Steel floor plate with roll grooves in bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point locking system plus mechanically insertable stop angles at the front track, load securing certificate to DIN 30722-1 * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10-ton UVV lashing rings at the front bulkhead carrier * 3 pairs of 10-ton UVV lashing rings on the side outer frames * 4 pairs of 2-ton cloverleaf lashing points per side * 4 x 8-ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable rear storage compartment) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in a shade of black ----Information: * New vehicle without prior registration, with full manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available approx. from week 43 / 2026

Stav: použitý, konfigurácia náprav: 2 nápravy, celková šírka: 25 000 mm, celková výška: 40 000 mm, Rok výroby: 2014, Výbava: ABS, Na otázky ohľadom vozidla Vám rád odpovie pán Seidel (telefonicky). MÜLLER MITTELTAL SF32BM/BT auto-nadstavba na betón Nadstavba: Liebherr HTM 1004 10m³, BPW nápravy, bubnové brzdy, pružinové zásobníky, Wabco ABS, 1. náprava zdvíhacia, vzduchové odpruženie, prípustná celková hmotnosť: 32.000 kg, pohotovostná hmotnosť: 6.510 kg, užitočné zaťaženie: 25.490 kg, dezén pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Na požiadanie Vám pripravíme ponuku na leasing alebo financovanie. Pán Seidel Vám ochotne poradí telefonicky. Ďalšie informácie nájdete na našej domovskej stránke. ... Chyby, zmeny a medzipredaj vyhradené!!! = Ďalšie informácie = Celková prípustná hmotnosť: 32.000 kg Kdsdpfx Amsyfu Sdjisl Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable in mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed fenders made of sheet steel with splash guards * Closed side underrun protection usable as advertising surface * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm Kodpfx Aeu I Iqxomiodl * Swivelling cable drum superstructure, clear width between drum arms 1,700 mm – with tension lock for securing the drum at the support arm ends, as well as central claw locking mechanism for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Manual Landing Gear (front) * Spring-assisted square tube supports at rear with base plate, securing pins for multiple support heights * Drawbar with 40 mm bolt-type towing eye (height-adjustable, mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubing with cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swivel-mounted cable drum frame, clear width between drum arms 1,700 mm, with tension lock for securing drum at arm ends and a centrally positioned claw lock to secure the cable drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotatable ends Kdedju I Iqlopfx Amiol * 1 pair of stepped centering cones made of polyamide * Hydraulic power unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front landing gear * Spring-assisted square tube supports at the rear with base plate, safety locking pins for variable support heights * Drawbar with 40 mm screwed towing eye (height-adjustable ___ mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross-members * Closed steel mudguards with splash protection * Closed lateral underrun protection usable as advertising space * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling cable drum mounting, usable width between drum arms: 1,700 mm; with tension lock to secure the drum ends on the supporting arms as well as a central claw lock to secure the cable drum mounting to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed controller and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped * Hydraulic power pack with Loncin gasoline engine, including manual and electric starter Kdedpfx Aou I Iqrjmijl * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Curb weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Spring-assisted square tube supports at the rear with base plates, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection that can be used as an advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; with clamp lock for drum securing at the carrier arm ends and a central claw lock securing the cable drum superstructure to the chassis * Motor hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends Kedpfx Aeu I Iq Esmijdl * 1 pair of polyamide centering cones, stepped in stages * Hydraulic power pack with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Hot-dip galvanized finish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Rear square tube supports with spring assistance and base plates, safety locking pins for multiple support heights * Drawbar with 40 mm screw coupling eye (height adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and cross members * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivelling cable drum mount, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the ends of the support arms and a central claw lock for securing the drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise recessed polyamide centring cones * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tyres * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf Kdsdpfx Aeu I Iqfemijl * Sample images