Müller-Mitteltal 5 Achs Tieflader, Nachlauflenkachse, Ma Liftbar kúpiť použité (42 187)

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t, nápravy Gigant * Parabolické pružiny s vyrovnávacou jednotkou * Výškovo nastaviteľné ťažné oje o 300 mm * BPW oporný mechanizmus * Mechanické padacie oporné nohy vzadu * Plastová náradiarska skrinka vpredu vpravo na čelnej stene * Bočná ochrana proti nárazu * LED osvetlenie * Podlaha z ihličnatého dreva 50 mm * V rohoch pred čelnou stenou a na zadnom nosníku vždy 1 x 6,3 t kotviaci krúžok, ako aj bočne vždy 2 x 6,3 t UVV upevňovacie krúžky zapustené vo vonkajšom ráme * Jednodielne mechanické rampy z roštov s pružinou pre obsluhu jednou osobou, cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a ťažné oje žiarovo pozinkované * Nápravy, pružiny, vzduchojem, predný oporný mechanizmus lakovaný v čiernom odtieni * Nové vozidlo s plnou zárukou výrobcu * Chyby a medziobchod vyhradené * Ihneď k dodaniu z Egestorfu Iodpfxowyhzvo Akastf

Stav: nový, maximálna hmotnosť nákladu: 8 620 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9: ----Braking system: Itodpjm Angvjfx Akasf * Electronic Braking System (EBS) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----General Accessories: * Jost mechanical landing leg at the front * Two mechanical, hot-dip galvanized folding supports at the rear * Galvanized sheet steel toolbox, installed on the right side * Hot-dip galvanized bolted underrun protection * Plastic quarter mudguards ----Tipping Platform Body: * Net hooks mounted laterally and at the rear in the central locking mounts, plus 3 hooks on the front wall * Hot-dip galvanized chassis * Steel pallet-wide 3-way tipper body * Full-length drop sides, no center stanchions, with tailboard spring lifters * Drop-down and swinging rear flap via manual central locking * Bolted, hot-dip galvanized rear stanchions * 4 mm steel floor plate * Prepared for later retrofitting of side extension boards * Platform length: 5.5 meters ----Load Securing: * One 5 t lashing ring in each corner * Four 3 t recessed lashing rings per side in the outer frame ----Ramps: * Rear mounting track for drive-on ramps * One pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment integrated under the loading platform in the chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in a shade of black * Platform body color: RAL 9010 pure white * Painting of side walls and tipper body in any RAL color available at extra cost ----Additional information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf, near the A7 motorway

Stav: nový, maximálna hmotnosť nákladu: 8 620 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9: —Brakes: Isdpfxsl Thx Ee Akastf * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes —Axles: * 2 x 5.5 t Gigant axles —Suspension: * Parabolic springs with tandem equalizer unit —Drawbar / Flange Eye: * Height-adjustable drawbar (hot-dip galvanized, adjustable by 300 mm) with 40 mm flange eye —Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights —General Attachments: * Jost mechanical landing leg at the front * Two mechanical hot-dip galvanized foldable supports at the rear * Tool box made of galvanized sheet steel, mounted right side * Hot-dip galvanized bolt-on underrun protection * Tool box made of galvanized sheet steel, mounted right side * Plastic quarter mudguards —Tipping Platform: * Mesh hooks on the sides and rear in the central locking mounts, plus 3 on the front wall * Hot-dip galvanized chassis * Steel pallet three-way tipping body * Continuous drop sides without center stanchions, foldable with sideboard spring assist * Tailgate foldable or swinging, operated via manual central locking * Bolted, hot-dip galvanized rear stanchions * 4 mm steel floor plate * Prepared for retrofitting of side wall extensions * 5.5 m platform length —Load Securing: * Each corner fitted with one 5 t lashing point * Four 3 t lashing rings per side, mounted flush in the outer frame —Ramps: * Rear mounting rail for drive-on ramps * Pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the load bed, integrated into the chassis from the rear —Wheelbase: * Wheelbase: 990 mm —Tyres: * Tyres: 235/75 R17.5 —Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in black * Platform superstructure color: RAL 9010 pure white * Custom painting of side walls and tipping bridge in other RAL colors available at extra cost —Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer's warranty * Subject to errors and prior sale —Delivery Time: * Immediately available ex Egestorf, A7

Stav: použitý, pohotovostná hmotnosť: 3 680 kg, maximálna hmotnosť nákladu: 10 720 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 11/2021, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 385/55R19,5 156J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/55R19,5 156J, veľkosť zadnej pneumatiky: 385/55R19,5 156J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, AKO NOVÝ, široké pneumatiky, sklápačová plošina POZINKOVANÁ, 12 kotviacich ôk, bočnice 600 mm, príplatok za rampy 1.000 €, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na požiadanie! Itedpfx Akjyy Uwqoaef

Stav: použitý, maximálna hmotnosť nákladu: 4 960 kg, celková hmotnosť: 10 500 kg, prvá registrácia: 04/1993, ďalšia kontrola (TÜV): 01/2026, dĺžka ložného priestoru: 6 260 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 2 430 mm, objem nakladacieho priestoru: 37 m³, Výbava: ABS, zdvíhacie čelo, 2-nápravový tandemový chladiarenský príves, 7 m, so zdvíhacou plošinou s nosnosťou 1 t. * THERMOKING LND-II MAX (dieselový motor) a stacionárne chladenie 380 V ELEKTRO * Číslo vozidla pre zákaznícke dopyty: 4593 * Zdvíhacia plošina * Vzduchové pruženie * EBS * Protišmykový systém (ABS) Bez záruky za tlačové a pravopisné chyby Predaj iba podnikateľom Zmeny a medzičasný predaj vyhradené. Popis slúži iba na identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Záväzné je znenie v kúpnej zmluve. * TOP SERVIS + KVALITA * Radi Vám pripravíme ponuku na leasing, financovanie alebo splátkový predaj Poistenie záruky na vyžiadanie u poisťovateľa Itedpfsykxflsx Akaef * TÜV / UVV LBW / tachografová kontrola a montáž OBU zariadenia cez našich partnerov na mieste * Colná poznávacia značka na 30 dní Všetky colné doklady pre export sú možné, je nutné ich objednať individuálne * Mýto cez Toll-Collect je možné objednať u nás * Bezplatný transfer z letiska Stuttgart alebo železničnej stanice Metzingen (Württ) * ŽELEZNIČNÁ STANICA PRE PRÍCHOD: 72555 METZINGEN/WÜRTT. * PRE ANGLIČTINU * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP číslo * * ---- Navštívte našu webovú stránku na * viac ako 200 vozidiel stále na sklade

Stav: nový, maximálna hmotnosť nákladu: 6 810 kg, celková hmotnosť: 9 600 kg, konfigurácia náprav: 1 náprava, dĺžka ložného priestoru: 4 030 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * EK 9,6 ----Brzda: * EBS (elektronický brzdový systém) * Núdzové uvoľňovanie pre valce pružinových akumulátorov * Bubnová brzda ----Náprava: * SAF náprava ----Pruženie: * Parabolické listové pružiny ----Ťažné zariadenie / Ťažné oko: * Ťažná tyč ako stredná oje so 40 mm skrutkovacím ťažným okom * Plynulo nastaviteľná výška ťažnej tyče pomocou vretenového zdvihového prvku namiesto pevnej tyče ----Spájacia výška: * Štandardná spájacia výška približne 900 mm (+/- 150 mm) ----Elektrika / osvetlenie: * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle cez EBS signál – bez nutnosti inštalácie v nákladnom vozidle * 15-pólová elektrická zásuvka * LED koncové svetlá * Blikajúce bočné pozičné svetlá ----Všeobecné prídavné diely: * Oporný navijak vpredu * Uzatvorené plastové blatníky * Sklopná ochrana proti podbehnutiu pre cestné finišéry ----Podvozok: Isdpfew Ndr Usx Akastf * Podvozok z jemnozrnnej ocele ----Sklápacia nadstavba: * Paletová trojstranná sklápacia nadstavba * 700 mm oceľová predná stena * Hliníkové bočné steny asymetrické, po celej dĺžke bez stredového stĺpika, sklopné s dlhým uzamykacím systémom a kyvné cez manuálne centrálne zamykanie * 800 mm vysoká oceľová zadná stena s automatickým otvorením pri sklápacom procese dozadu * 4 mm podlaha z Hardox 450 ocele ----Zabezpečenie nákladu: * Po stranách vždy 2 páry 3 t kotviacich ôk zapustených a sklopných v oceľovej podlahe ----Lakovanie: * Podvozok, ťažná tyč a ochrana proti podbehnutiu žiarovo zinkované * Lakovanie sklápacej nadstavby v RAL-9010 čistobielej farbe ----Informácie: * Nové vozidlo s výrobcom poskytovanou zárukou * Chyby a medzipredaj vyhradené ----Dodacia lehota: * Dostupné približne od 25. týždňa roku 2026

Stav: použitý, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 14 700 kg, prvá registrácia: 02/2001, ďalšia kontrola (TÜV): 10/2024, celková šírka: 25 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17.5 / 10mm, veľkosť prednej pneumatiky: 235 / 75 R 17.5 / 10mm, prevádzková hmotnosť: 24 000 kg,

Stav: nový, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, * TRA-Kombi 18.0: Isdpfxol Thwcj Akajtf * 3-in-1: Suitable for hooklift containers, skip containers, and as a low loader ----Brakes: * TPMS tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release system for spring-loaded brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height-adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power plug * TPMS (tire pressure monitoring), display possible in the truck via EBS signal (without truck-side installation) ----General attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with splash protection * Storage box for container nets, galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic buffer * Mechanical rear drop supports ----Loading area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding rolling containers * Steel floor with recesses for rollers in the bogie area * For hooklift container transport, container length possible from 5,500 to 7,000 mm * Pneumatic 4-point clamping lock as well as mechanically insertable stop angles at the front of the running track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip locating wedges for lateral centering of skips, front 4 wedges plug-in with oscillating stop * Weld seam as anti-slip surface in the ramp area of the running track ----Load securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements to ensure form-fit and force-fit securing of skips * 4 lashing bars on each side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically possible: 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, * TRA-Kombi 18.0: * 3 in 1 = suitable for roll-off containers, skip containers, and as a low-loader ----Braking System: * TPMS (tire pressure monitoring system) * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 to. Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height setting ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (tire pressure monitoring system), in-cab display possible via EBS signal (without additional installation in the truck) Iodpjl Thv Refx Akaetf ----General Equipment: * Tool box made of powder-coated steel sheet, mounted right side * Side underrun protection * Plastic quarter mudguards with splash protection * Storage box for container nets made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic buffer stops * Mechanical drop legs, rear ----Loading Area: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in the bogie area * Suitable for transporting roll-off containers with lengths from 5,500 – 7,000 mm * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front in the guide rail; load securing certificate according to DIN 30722-1 * Transport of up to two skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips; front 4 skip stops are plug-in with pivotable stop * Weld bead as anti-slip coating in the ramp entry area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements, ensuring both positive and non-positive securing of skips * Each side with 4 four-leaf clover-style lashing rails * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair aluminum drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber tired and tracked vehicles (lockable storage compartment, access from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Gross technical weight up to 20,000 kg possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2005, farba: čierny, Rok výroby: 2005, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Náprava s dvojitými kolesami - Rezervné koleso = Ďalšie informácie = Hrubá hmotnosť: 8.900 kg Užitočné zaťaženie: 26.100 kg CELKOVÁ HMOTNOSŤ: 35.000 kg Predajná cena: € 18.000, US$ 20.770 Ijdexw T Uajpfx Akajtf

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer with Ramps * BRAND NEW vehicle, no initial registration * Available mid/end of May '26 in RAL 7016 Anthracite Reference for inquiries: 30504 Itjdpfxjyxbdbo Akasf * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * 6.27 m x 2.47 m x 0.4 m laser-welded drop sides made of steel, foldable with 2 torsion springs * Bolted front wall made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized) inserted in front of the ramps with a storage mount behind the front wall * Bolted rear stanchions (hot-dip galvanized) * Softwood floor, 50 mm thick. * 4 UVV lashing rings LC 6300 daN recessed front and rear in the cross member * 10 UVV lashing brackets LC 3000 daN recessed in the existing hole pattern in the outer frame * Ramps: one-piece with hot-dip galvanized anti-slip grating * Mounting points for retrofitting container locks in front of the front wall * Plastic toolbox in front of the bulkhead * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (twin tires), parabolic suspension * BPW axles with tire pressure monitoring system * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * 1 removable LED rotating beacon (warning light) incl. bracket and installation ---- * Trade-in possible * Financing available via our partner banks with or without down payment / residual value and various terms. Request a quote from us! ---- * Example lease-to-own option from our partner FM LeasingPartner: €475/month net, 60-month term, no down payment and “0” Euro residual. Other terms with or without down payment/residual value available. Request a quote from us! We are an authorized Müller-Mitteltal dealer! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside business hours by appointment * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader / Drive-Over Platform Trailer Inquiry No.: 11630 – Vehicle available immediately from stock in Alsdorf NEW VEHICLE incl. COC * GVW: 21t, payload: 16.50t, galvanized chassis * Platform version with 400mm high front wall, ramp lock with ramp support rods and angled bracing * 21t GVW version with reinforced frame and axle, axle spacing 1,810 mm * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7 m loading length with 400 mm high front wall * Extended ramps: 3 m single-piece ramps, hot-dip galvanized with galvanized grating * Ramp lifting device with vertically positioned, adjustable springs for easy one-man operation * Load securing package: - 4 UVV-certified lashing brackets (LC 8,000 daN), fitted into 45° outer frame hole pattern, positioned approx. 1m from the front/rear crossmember - 10 UVV-certified recessed lashing brackets LC 3,000 daN, foldable into the external frame - 2 UVV-certified lashing rings front/rear, recessed in crossmember, LC 10,000 daN each - Additional lashing options via 50 mm diameter holes (LC 1,200 daN) in the front and rear crossmembers * Prepared for retrofitting container locks (container locks available at additional cost) * Softwood floor, 50 mm thick * Gigant axles with full air suspension incl. EBS 2S/2M, lift/lower function * Tyres: 235/75R17.5 (8x), twin tires with tire pressure monitoring sensors * Plastic toolbox in front of the front wall, right-hand side (in direction of travel) * LED lighting system * 7-pin socket at rear, wired for overlength lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lamps * Oversize warning sign * 1 removable round LED beacon incl. bracket and installation * Folding supports at rear, front support leg with geared wind crank ---- Hire purchase example with our partner MMV Leasing: €655/month (net), 60 months, no down payment, zero residual value Other contract terms with/without down payment/residual value available! We are an official Müller Mitteltal dealer ---- Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside office hours, appointments available by arrangement Itsdpfx Ajyvxg Uokaof * We speak German, English, Russian, Polish, French * WhatsApp

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS = Ďalšie informácie = Itsdpfx Akext Rw Rjaef Hrubá hmotnosť: 4.600 kg Užitočné zaťaženie: 13.400 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 6.500, US$ 7.511

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-R 14,4 ----Brzda: * EBS – elektronický brzdový systém * Nouzové odjištění pružinových brzdových válců * Bubnové brzdy ----Nápravy: * 2 × 7 t nápravy Gigant ----Odpružení: * Vzduchové odpružení ----Tažná oj / přípojný čep: * Tažná oj výškově stavitelná v rozsahu 300 mm * Prodloužení oje o 250 mm na celkovou délku 2 250 mm * 40mm přípojný čep s přírubou ----Osvětlení / elektroinstalace: * RDÜ (monitoring tlaku v pneumatikách) * LED koncová světla 12 / 24 V * 15pinová elektrická zásuvka ----Obecná přídavná výbava: * Opěrná noha Jost vpředu * Vnější žárově zinkované sklopné podpěry vzadu * Plastová skříň na nářadí vpředu vpravo zvenčí na přední stěně * Boční ochrana proti najetí * Plastové čtvrt-blatníky ----Plošina plošinového přívěsu: * 50mm podlaha z jehličnatého dřeva * Příprava před čelní stěnou pro dodatečnou montáž kontejnerových uzávěrů Ijdpfxoq Dyvyj Akastf * Šroubovaná čelní stěna z hladkého plechu * Boční stěny ze stěnového ocelového plechu – trapézový profil – sklopné s pružinovým mechanismem * Zadní stěna z oceli, zasouvací mezi rampové držáky a při nepoužívání uložitelná uvnitř před čelem * Zadní sloupky šroubované * Nájezdová hrana vzadu cca 860 mm ----Zajištění nákladu: * Perforovaný vnější rám ohnutý cca 45° s vázací silou 2 t každých 480 mm * Možnost instalace sklopných vázacích třmenů s vázací silou 3 t každých 600 mm * V předních a zadních rozích vždy 1× vázací oko s nosností 6,3 t * V čelní a koncové příčce různé otvory pro vázání 1,2 t ----RAMPY: * Jednodílné mechanické nájezdové rampy z roštového materiálu s pružinovým mechanismem pro obsluhu jednou osobou cca 2 750 × 600 mm (stlačitelné na šířku 20 mm) ----Nátěr: * Podvozek, tažná oj, čelní stěna, zadní stěna, zadní část i nájezdové rampy žárově zinkované * Barva bočních stěn v odstínu RAL 9010 čistě bílá * Nástřik bočních stěn v jiném odstínu RAL možný za příplatek ----Informace: * – Zesílená a certifikovaná nástavba dle EN 12642 XL včetně certifikátu zajištění nákladu – * Nové vozidlo s garancí výrobce * Změny a předchozí prodej vyhrazeny ----Dodací lhůta: * K dispozici ihned, odběr v Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: 3 in 1 = for roll-off containers, skip containers, and as a low loader ----Brakes: * EBS-E (Electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Isdpjl Tld Iofx Akastf * 2 x 10.5 t axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), display possible in truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General Accessories: * Tool box made of powder-coated sheet steel * Spare wheel holder, basket design, mounted on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * For roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp locking as well as mechanically pluggable stop brackets at the front in the running rail * Transport of up to 2 skip containers with max. 10 m³ volume possible * Including 8 relocatable container stops for lateral centering, the front 4 equipped with pivotable stop * Weld bead as anti-slip coating in the running rail area of the ramp incline * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of the containers, 4 lashing bars in cloverleaf design per side * 1 pair of 13.4 t UVV lashing rings at the front * 4 x 8 t lashing lugs per side recessed into the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour marking strips on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: Itedpfxjwb Raks Akajf * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA Combination 18.0: 3 in 1 = for roll-off containers, skip containers, and as a low loader ----Brakes: * EBS-E (electronic braking system) * Emergency release for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm draw eye and height adjustment ----Electrics / Lighting: * TPMS (tire pressure monitoring system), display possible in truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel * Spare wheel carrier, basket design, mounted on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection buffers * Foldable A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers Isdjl Tnwzjpfx Akaotf * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-way clamping lock and mechanical plug-in stop brackets at the front of the guide rail * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, the front 4 stops are plug-in with pendulum stop * Weld bead as anti-slip surface in the ramp area * Mechanical rear support legs ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the side for attaching tensioning elements to secure skips, 4 lashing brackets in cloverleaf design (per side) * 1 pair of 13.4-ton UVV lashing rings at the front * 4 x 8-ton lashing eyes recessed in the outer frame on each side ----Ramps: * Aluminum drive-on ramps (10.6 ton/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape at sides & rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight technically possible up to 20,000 kg-- * New vehicle without initial registration, comes with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egstorf

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-R 14.4 ----Brzda: * EBS – elektronický brzdový systém * Nouzové uvolňovací zařízení pro pružinové válce * Bubnové brzdy ----Nápravy: * 2 x 7 t nápravy Gigant ----Odpružení: * Vzduchové odpružení ----Tažná oj / tažné oko s přírubou: * výškově stavitelná tažná oj (nastavitelná o 300 mm) * prodloužení oje o 250 mm na celkovou délku 2 250 mm * 40mm tažné oko s přírubou ----Osvětlení / Elektrická výbava: * RDÜ (monitorování tlaku v pneumatikách) * LED koncová světla 12 / 24 V * 15-pólová elektrická zástrčka ----Obecné přídavné prvky: * Podpěrná noha Jost vpředu Iodpfxopk Dv Re Akaotf * Vnější žárově zinkované sklopné podpěry vzadu * Plastová schránka na nářadí vpravo vpředu na čele korby * Boční nárazová ochrana * Plastové čtvrt blatníky ----Ložná plocha návěsu: * 50mm podlaha ze smrkového masivu * Před čelní stěnou příprava na dodatečnou montáž uzávěrů kontejneru * Šroubovaná přední stěna z hladkého plechu * Sklopné bočnice z trapézového ocelového plechu s pomocnými pružinami * Zadní stěna z ocelového plechu zasouvatelná mezi držáky nájezdových ramp, při nepoužívání uložená vnitřně před čelní stěnou * Zadní sloupky šroubované * Zadní nájezd cca 860 mm ----Zajištění nákladu: * Děrovaný vnější rám, ohnutý cca 45°, zajišťovací síla 2 t každých 480 mm * Možnost instalace výklopných ok s nosností 3 t každých 600 mm * V každém rohu vpředu a vzadu 1x zajišťovací oko s nosností 6,3 t * V předním a zadním příčníku různé otvory pro zajišťovací možnosti s nosností 1,2 t ----RAMPY: * Jednodílné mechanické nájezdové rampy z roštového plechu s pomocnou pružinou pro ovládání jedním člověkem, rozměry cca 2 750 x 600 mm (ve shrnutém stavu až na 20 mm) ----Nátěr: * Žárově zinkovaný rám vozidla i oje, čelní stěna, zadní stěna, zadní čelo a nájezdové rampy * Boční stěny standardně v barvě RAL 9010 (čistě bílá) * Na přání lakování bočnic do jiné barvy RAL za příplatek ----Informace: * --Zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu-- * Nové vozidlo s plnou zárukou výrobce * Chyby a mezitímní prodej vyhrazeny ----Doba dodání: * K okamžitému odběru v Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) Itsdpfx Aoq Euakjkajf * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 36 900 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control Itedpfx Akoykx Nkeaef * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses Isdotpta Dspfx Akajtf ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: nový, maximálna hmotnosť nákladu: 36 900 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: Itedpfjykx Nqex Akajf * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Immediately available – Reference number for inquiries: 11611 Delivery to your address possible. * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized 400mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized grating, anti-slip design, can be pushed together to approx. 20mm, secured with holding rods and diagonal support * Ramp assist – vertical, adjustable springs for easy single-person operation * 4 UVV-drop lashing rings (LC 6300daN) * Perforated side frame (45°-angled, hole pattern for lashing systems, lashing capacity per point LC 2000 daN at a minimum spacing of 480mm. Retrofitting with drop lashing rings LC 3000 daN at approx. 600mm intervals possible) with close-set transverse crossmembers, high-profile front and rear ends, rear drive-on slope, all hot-dip galvanized * 10 UVV lashing rings LC 3000 daN recessed into existing hole pattern in the side frame, additional * Further tie-down options via holes (Ø 50mm, LC 1200 daN) in the front and end crossmembers * Tool box in front of the bulkhead * Side marker lights with indicator control * 50mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40mm towing eye (hot-dip galvanized), height-adjustable, optionally available with 50mm eye Itodpfxoyndh Ho Akaef * 1 removable LED warning flasher at the rear---- * Leasing, hire purchase, financing, trade-in possible * e.g. €510 for 60 months, without down payment, no residual value * ---- * Our opening times * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside business hours we are available by appointment. We speak German, English, Polish, and French. Leasing, financing, and trade-in possible.

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) Itedpfetplwisx Akasf * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame Itsdpexptn Rsfx Akaef * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos