Otvorený náves s plachtou

SCHWARZMÜLLER PowerLine LIFT/LENKACHSE HUBDACH 5880kg NEU

NEW VEHICLE SCHWARZMÜLLER 'POWER LINE' 3-AXLE CURTAIN-SIDER FLATBED SEMI-TRAILER RH125

Weights
- Gross weight (technical): 39 t
- Axle unit load (technical): 27 t
- Kingpin load (technical): 12 t
- Unladen weight: approx. 5,800 kg

Gtsdji Ep Tbjpfx Ag Sot
Dimensions
- Internal length: approx. 13,620 mm
- Internal width: approx. 2,480 mm
- Loading width: approx. 2,480 mm
- Internal loading height: approx. 2,730 mm
- Side loading height: approx. 2,620 mm
- Max. overall width: 2,550 mm
- Rear loading height: approx. 1,220 mm

Chassis
- Welded steel frame construction
- Lightweight frame made from high-strength fine-grain steel
- Designed for a 20 t point load over 6 m loading length
- Frame height front: approx. 125 mm
- Fifth wheel height unladen: approx. 1,120–1,220 mm
- Interchangeable 2'' kingpin
- Outer frame with holes at 100 mm intervals, elongated holes 40/25 mm per DIN EN 12640, plus 23 pairs of recessed 2.5 t lashing rings
- 4 pairs of lashing rings for ship transport

Support Equipment
- Mechanical steel landing gears, 2 x 12 t, single-sided operation on the right, with thrust compensation

Axles
- 3x SAF-Intradisc-B9 axles with 430 mm disc brakes (22.5'' disc)
- Load rating 9 t/axle, on-road version, axle spacing 1,310 + 1,310 mm, wheelbase 7,620 mm
- SAF trailing steering axle, approx. 10° steering angle
- Electropneumatic reversing lock, activated automatically in reverse gear, also switchable from the cab and with release valve on trailer
- 1st axle lift axle, automatic load-dependent, with forced lowering and traction aid via push button + '3 x brake' function

Wheels
- 6x tyres 385/65 R 22.5, 160K (factory choice)
- 6x steel rims 11.75 x 22.5, ET120

Braking System/Suspension
- Braking system per EC Directive 71/320 or ECE R13
- Two-line compressed air braking system
- EBS system 2S2M, one axle equipped with sensors
- RSS (stability program)
- Spring-actuated parking brake
- Aluminium air tanks
- Brake/air connections with 2 single coupling heads yellow/red
- EBS/ABS socket at front
- Air suspension with lift and lower function, total lift approx. 200 mm
- Automatic ride height from 15 km/h

Assistance / Safety Systems
- SWIT – Schwarzmüller Intelligent Telematics, 'BASIC' performance package
- Axle load display (EBS CAN-bus signal)

Floor
- 27 mm phenolic plywood floor with aluminium hat-profile rails over the longitudinal beams
- Floor load rating: 7,200 kg forklift axle load
- 3/5 mm aluminium wear plate at rear, 300 mm depth, flush with floor

Front Wall
- Aluminium hollow-section front wall, approx. 2,400 mm high
- 2 lashing rings for load securing
- 2 reinforced centre posts
- Front wall protection inside: 9 mm phenolic plywood, approx. 650 mm high
- Top front tarpaulin
- Aluminium corner posts at front, protruding laterally, bolted
- Curtain pole at front corner posts with tension lever, can also be opened from front

Rear Wall
- Aluminium double doors, profile design, each with 2 locking rods, curtain pole at rear corner posts with tension ratchet, door holders

Posts/Slats
- 3 pairs of reinforced centre posts, slidably along the full length, secured in pockets, both sides with 4 rows of slat pockets for lifting roof
- 4 rows (32 pcs) aluminium wedge slats, 100 mm

Roof Frame
- Versus sliding roof with plastic folding panels, slides from rear to front; rear crossbeam with auto-raising function; roof can also be partially slid to rear; both sides fitted with aluminium running rail profiles for curtain and centre posts, frame height 140 mm

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.