Roll off príves

MEILLER Abrollanhänger | Zwillingsbereifung*EBS*BPW*1.Hd

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 Bodpfxoi Ai E Ro Aigoll - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: Bodpfx Aietpta Djgell * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27