Nízkopodlažný náves

FAYMONVILLE Multimax Plus Satteltieflader Hebebett

Stav: nový, maximálna hmotnosť nákladu: 36 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment specifications: Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimizing the load platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating platform with 5 mm steel reinforcement on gooseneck and rear chamfer * 2-inch kingpin * Guide plate on gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized, fitted on the gooseneck * 1 LED work light each, mounted left and right at the top of the front wall, operated by an on/off switch (operation via tractor unit not possible in this case) LOAD PLATFORM: * Load platform, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° * Platform after the gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg * Continuous grating platform with approx. 5 mm steel plate reinforcement on the lift bed and load platform, designed for point loads TYRES: 235/75 R 17.5 3PMSF twin tires. Brand at our discretion * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering * 3rd axle with electromagnetic reverse lock, can be engaged via reverse gear or manually * 1st axle with traction aid * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: Fjdpfjy Auhhox Ab Tegd * 1 pair of two-section AXS steel ramps with grating surface, approx. 4,920 mm long and 900 mm wide * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards * Flashing beacons at outer sides of ramp tips, with control switch next to ramp controls * Ramp safety locking in transport position via quick-release * Factory-applied sand-finish coating on outer frame and ramp tips * Mechanical drop-leg lateral supports integrated in the ramps to assist in docking to unloading ramps * Hydraulic ramp operating valves located on the right side of the trailer BRAKE SYSTEM: WABCO EBS-E brake system in line with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer carmine red (RAL 3002) * Rims silver grey * Sideboards natural aluminum * Wheel hubs as per axle manufacturer * Lamp bracket pure white (RAL 9010) EQUIPMENT: * Plug-in steel front wall, approx. 1,600 mm high, incl. supply line connector bar for tractor unit, mounted approx. 1,000 mm from the lower edge of the outer frame profile * Lashing chain attachment points inside the front wall left and right, incl. aluminum trays below left and right for stowing chains or lashing straps * Approx. 12 mm thick DELIGNIT lining bolted behind front wall * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Wire rope approx. 24 m long, rope ø approx. 9.5 mm, including rope press

Stav: nový, maximálna hmotnosť nákladu: 36 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full specification available on request. Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front junction box with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit * Gooseneck outer beams with mounting holes for screw-in lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole at the top rear of the gooseneck’s outer beams for a screw-in lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside the gooseneck outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear taper * 2'' kingpin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable (approx. 35 mm², approx. 3.5 m) to supply the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug (NATO-NATO) * 1 pair of removable ALU sideboards on the gooseneck, approx. 400 mm high, anodized finish LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° * Section after gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, load capacity up to approx. 9,000 kg Fodpfx Abjyhkque Tegd * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle rear steering. 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice, load index 143/141J (144/144F) * Mechanical landing gear with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel plate reinforcement for extra strength, designed for point loads: on the lift bed and on the loading platform * Painted sand coating on the cover plates of the gooseneck as well as transition areas between neck and lift bed, lift bed and loading platform, as well as between loading platform and ramps * 1 mounting adapter for spare wheel under the loading platform on the right in front of axles * Cut-outs in the outer frame of the loading platform and lift bed for hanging tie-down straps (LC 2,000 daN) * 11 pairs of recessed fold-out lashing rings in the outer frame of the loading platform (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the loading platform * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear section of the loading platform * Control valves for the hydraulic ramps on the right side of the vehicle * 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with length approx. 4,920 mm and a