Náves na guľatinu

Fliegl 3-Achs Holzrungensattel SDS 390 L=13,5m

Chassis fifth wheel, freight forwarding
Steel welded construction, reinforced version, only 2 longitudinal members as double T-beams with steel/chequered plate between the members, fifth wheel with interchangeable 2" king pin. Protective cover for rear lights.
8 pairs of lashing eyes bolted or welded to the frame, at the manufacturer's discretion.
24-ton two-speed landing gear, single-sided operation, with straight base, without shifting compensation
Wheel chocks with holder
Side underrun protection aluminium
Rear underrun protection galvanized steel
Half-shell mudguards with anti-spray flaps according to EU regulations
1 spare wheel holder for 1 spare wheel, with fastening kit
Lhodpfx Ajza Anvop Iji
1 toolbox recessed between the longitudinal members
8 pairs of timber bolster mounts, mounting type at manufacturer's discretion, bolted to the frame, each with 2 telescopic timber stakes extendable from 1800 to 2800 mm, load capacity per pair 7 t.
Axles & Suspension
BPW disc brake axles with 430 mm disc diameter
Air suspension with raise & lower valve, emergency cable on the axles
First axle liftable automatically, including forced lowering and start assist, operation by 'brake 3 times' (start assist functional up to 30% axle load exceedance and maximum speed of 25 km/h)
Axle spacing staggered 1410/1310 mm (for combined transport), max. total train weight 44 t
Wheels and Tyres
385/65 R 22.5"
manufacturer’s choice
Steel rims, factory silver
Brake System
Two-line compressed air brake system
Spring-loaded parking brake
Axle load detection via EBS CAN bus signal, for display in driver’s cab, truck needs to be pre-equipped accordingly, no truck installation (not certified for legal metering)
2 non-interchangeable coupling heads at the front, without connecting line
EBS – Electronic Braking System with EBS socket at the front, without connection cable
Attention: The trailer may only be towed by tractors that ensure the proper functioning of ABS!
'Safe Parking'
Electrics
24V, multi-chamber tail lights, yellow LED side marker lights
2 white position lights at the front
2 white/red lane position lights at the rear
2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable
Front wall/corner stanchions
Steel/mesh front wall, approx. 2,300 mm high, bolted to frame
Registration / Signs
Country of registration: Germany
Approval according to EC 2007/46
Prepared for single-line number plate holder
Contour marking with reflective tape to ECE R 048, white at sides, red at rear
Warning sign per ECE - 70
Paintwork
Frame: DB 7350 Nova Grey
Landing legs: Black coated
Front wall: Hot-dip galvanized

Inzerát bol automaticky preložený. Chyby v preklade sú možné.