Nízkopodlažný náves na prepravu stavebných strojov

de angelis culla vasca allungabile 2 assi usata

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Klsdohlz R Sopfx Akwst Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, maximálna hmotnosť nákladu: 44 000 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Ďalšie informácie tu: Kedpsv D Abtefx Akwolt

Stav: použitý, maximálna hmotnosť nákladu: 34 500 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2025, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 12 200 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 300 mm, celková šírka: 2 550 mm, celková výška: 320 mm, Rok výroby: 2025, Výbava: ABS, 2-axle low-loader/low-bed trailer in full specification First registration: 05/2025, new vehicle Overall length: 13,065 to 17,565 mm (single-stage telescopic, extendable by 4,500 mm in 500 mm increments) Fifth wheel height: 1,200 mm Standard low-bed length: 6,650 mm Klsdpfx Akjw A Ekmswst Extended low-bed length: 11,150 mm Gooseneck length: 3,650 mm Rear axle bogie length: 2,765 mm Loading height on rear bogie: only 845 mm LOW-BED LOADING HEIGHT: only approx. 300 mm (loaded) Gross technical weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis: 3-layer paintwork Detachable gooseneck with external main frame Central lubrication system for the front carriage plus one for the rear carriage All axles hydraulically steered GIGANT axles with drum brakes WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard PENDLE AXLES with hydraulic suspension, 600 mm travel WIRELESS REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental Electric hydraulics, 24-volt Oversize package 10 pairs of foldable deck wideners, each 225 mm 3 pairs of CONTAINER locking adapters, to accommodate either a 40 FT or a 20 FT container Drop sides on saddle platform Ramps for the low-bed platform 5 pairs of swivelling lash points in the low-bed, lashing capacity 10,000 daN 4 pairs of stake pockets in the outer frame 3 pairs of swivelling lashing rings on the rear bogie 1 pair of lashing rings on the rear underrun guard, LC 6,000 daN RENTING is the new BUYING – available immediately for hire or full-service leasing with us.