Náves

Wiese Baustoffauflieger mit Fassi Kran F240

Wiese Construction Materials Semi-Trailer

Fifth wheel load: 12,000 kg
Axle load: 27,000 kg
Gross vehicle weight rating (GVWR): 39,000 kg
Unladen weight: 10,840 kg
Load area length: approx. 9,200 mm
Overall length: approx. 10,600 mm
Internal width: 2,480 mm
Overall width: 2,550 mm

King pin
1 position with 2" king pin
Coupling height
in horizontal position approx. 1,160 mm
Top edge of main beam (without floor): approx. 1,380 mm
Loading height: approx. 1,410 mm

Lashing hole outer frame D=30 mm with punched rail on the slope
(160 mm high/30 mm floor recess/4 mm wall thickness)
Main beam spacing: 980 mm (center-center) - 1,130 mm (outer-outer)
Axles
3 axles, each with 9,000 kg capacity
Make: SAF with disc brakes D=430 mm
Track width: 2,040 mm
ABS: 1 axle with sensor
Axle spacing: approx. 1,510 mm / approx. 1,510 mm

Suspension
Original SAF air suspension with lifting/lowering valve
with safety ropes
Axle lift
1st axle with lift, automatic load-dependent start assist
switchable by push button in driver’s cab
Steering
Mechanical forced steering on axle 2 + 3
Double rod steering / Tridec

Brake system
2-line Wabco compressed air brake system to EU regulations 71/320/EEC et seq. with:
EBS/ABS 2S/2M with RSS function (Roll Stability Support)
and 7-pin socket
1x ISO coupling head yellow
1x ISO coupling head red
Spring-loaded parking brake on 2 axles
All fitted with quick couplings
Aluminium air tanks
Air system
Compressed air installation with:
1x lift/lower valve
1x level control valve
Aluminium air tanks
All fitted with quick couplings
Automatic lowering of air suspension for crane operation
Tyres
6 pcs, size 385/65 R22.5"
Make: Manufacturer’s choice
Tyre pressure monitoring system for 6 tyres, display in cab
Rims
6x steel rims 11.75x22.5", 10-hole, hub-centric, offset: 120 mm
Support device
Mechanical landing legs with T-swivel foot, permissible lifting capacity: 2x 12,000 kg
Operable from one side, 2 speeds
Make: Manufacturer’s choice
Wheel covers + mudguards
6x plastic half-shell covers
Mudguard brackets reinforced with flat steel
Note: 3rd steering axle with inner cut-out on the mudguard

Lighting system
24V lighting system to EU regulation 76/756/EEC et seq. with:
2x multi-chamber rear lights
Fpodpfxeyihg He Ag Tsc
Marker lights
Number plate lighting
LED side marker lamps with indicator function
2x 7-pin and 1x 15-pin sockets wired to EU standard
Rear lights mounted in reinforced light carrier = approved underrun protection
All required markings
Additional connections:
Electrical interface for crane control pre-installed as specified!

Safety equipment
Side underrun and rear underrun protection made of aluminium per EU regulations

Floor
OKULEN floor 32 mm

Superstructure
Straight front wall, 1,200 mm high, welded solid,
consisting of 4x steel profiles,
Welded to the front panel, filled with aluminium hollow profile
Inside with 625 mm high wear plate, galvanized steel
Both sides with Kinnegrip stanchions K20/1,100 mm high for unobstructed loading
Straight rear wall, 1,100 mm high, welded solid, consisting
of 4x steel profiles, welded to rear panel and aluminium hollow profile as infill
Inside with 625 mm high wear plate, galvanized steel
Both sides with Kinnegrip stanchions K20/1,100 mm high for unobstructed loading
2x3 aluminium sideboards 1,100 mm, foldable and lowerable
In the rear sideboards left and right: folding steps for access and grab handle outside on rear wall
Sideboards with one pair of gas pressure struts as lifting aids
2x2 Kinnegrip centre sta

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.