Otvorený náves s plachtou

KÖGEL S24-1*Volumen* LiftA*Hubdach*

VIN: WK0S0002400300639

Permitted fifth wheel load: 12,000 kg
Permitted axle group load: 24,000 kg (8,000 kg per axle)
Technically possible axle group load: approx. 27,000 kg (9,000 kg per axle)
Permitted gross vehicle weight: 39,000 kg
Technically possible gross vehicle weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with a test axle load of 7,200 kg

(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Load area length (internal): approx. 13,620 mm
(G) Load area width (internal): approx. 2,480 mm
(G2) Rear loading width: approx. 2,480 mm
(H1) Loading height unladen in level driving position: approx. 1,030 mm
(H2) Loading height laden in level driving position: approx. 1,000 mm
(H3) Achievable ramp height at vehicle rear with fifth wheel height 910 mm, loaded, raised: approx. 1,190 mm
Driving height set to 265 mm.
(K) Side loading height (internal): front approx. 2,735 mm - approx. 2,860 mm [adjustable by 5 x 25 mm], rear approx. 2,810-2,860 mm [adjustable by 1 x 50 mm]
(K1) Internal height under roof: front approx. 2,875 mm - approx. 3,000 mm [adjustable by 5 x 25 mm]| rear approx. 2,950 mm - approx. 3,000 mm [adjustable by 1 x 50 mm]
(X1) Total height unladen in level driving position: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- height adjustment

Body adjustments: The design of the "Mega" body allows a height adjustment of 5 x 25 mm at the front and 1 x 50 mm at the rear. The relevant heights (overall height, side loading height, interior height) change according to the selected body setting.
(T) Roof side height: approx. 180 mm. Due to the design of the roof beam, the pallet-width internal height corresponds to the specified internal height under the roof.

(N) Front overhang (according to ISO 1726): approx. 1,685 mm
Fsdpfx Acoycphzepegc
(N1) Front swing radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing radius (according to ISO 1726): approx. 2,300 mm
(P) Height above fifth wheel: approx. 90 mm
(S) Fifth wheel height possible unladen: approx. 940 - 1,070 mm, level at approx. 940 mm (observe total height!)

Chassis
Standard ladder-type frame in lightweight steel construction with through cross members. Cover plate between the outer frame and longitudinal beams as tire protection for the drive axles of the tractor unit. Coupling plate 8 mm thick, with a 2" king pin according to DIN 74080/ISO 337

Running Gear
Axle lift mechanism on axle 1. Fully automatic, load-dependent axle lift control. Starting aid: activation by 3x brake, 30% overload up to a speed of 25 km/h.
Three-axle SAF INTRADISC module, with disc brakes Ø 370 mm, offset 120 mm.
Air suspension with 260 mm stroke.

Chassis appendages
JOST landing legs, mechanical with compensating foot, 24 t lifting capacity.
Side protection device in accordance with ECE-R73
2 large waterproof plastic toolboxes, dimensions (internal) approx. 923 x 422 x 460 mm. Fitted at the rear, 1x left and 1x right.
Height of underrun protection profile min. 120 mm, designed for increased test forces.

Brake/air suspension system
WABCO EBS system
Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel behind the axle module. Driving position adjusts automatically.

Fitted version on both sides: Steel pallet stop rails with VarioFix hole pattern

Roof lift

Inzerát bol automaticky preložený. Chyby v preklade sú možné.