Sklápač

Stas 50

Stav: použitý, maximálna hmotnosť nákladu: 26 330 kg, celková hmotnosť: 34 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2011, ďalšia kontrola (TÜV): 02/2026, objem nakladacieho priestoru: 50 m³, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2011, Výbava: ABS, Whatsapp/Viber (nemecky/anglicky/arabsky): Whatsapp (nemecky/anglicky): ---- Podvozok * Oceľová korba Rodpfx Aex Iy I Defmel * Nápravy MB * Vzduchové odpruženie * Kotúčové brzdy * Pneumatiky 385/65 R22,5 * ABS * EBS * Sklopná zadná ochrana proti podjazdu ----Nadstavba * Oceľové sklápačové prevedenie * Hydraulika sklápania * Rozmery cca 8.550mm x 2.350mm x 2.300mm * Objem 50m³ * Dverový portál * Pracovná plošina ----Technické údaje * Celková povolená hmotnosť: 34.000kg * Pohotovostná hmotnosť: 7.670kg * Užitková hmotnosť: 26.330kg ----#Nemecké vozidlo*ALCOA# Financovanie/Leasing/Odkup na splátky na požiadanie možné ----Reklama / firemné logá na vozidlách mohli byť digitálne odstránené z fotografií. ----Kontaktná osoba telefonicky alebo cez WhatsApp: (nemecky, anglicky, arabsky) (nemecky, anglicky) ----Tešíme sa na Vašu návštevu, pre maximálne príjemnú skúsenosť prosíme o dohodnutie termínu vopred. ----Zmeny, chyby a medzipredaj vyhradené. Všetky údaje bez záruky, najmä pokiaľ ide o výbavu a príslušenstvo.

Stav: použitý, maximálna hmotnosť nákladu: 34 725 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2024, ďalšia kontrola (TÜV): 10/2025, dĺžka ložného priestoru: 8 912 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 2 285 mm, objem nakladacieho priestoru: 50 m³, celková šírka: 2 550 mm, celková výška: 3 672 mm, Rok výroby: 2024, Výbava: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "X-Shape" First registration 10/2024, condition like NEW Dimensions inside (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Redovuhcqopfx Afmjl Z-chassis, cranked design Floor throughout made from 5 mm HardoX steel HB450 Front wall and side walls 4/3 mm HardoX steel HB450 Angled front wall, interior with access ladder 2-wing rear portal doors, pneumatic secondary unlocking 1 GRAIN SLIDE in the right door leaf Reinforced roll-up roof tarpaulin, CENTRAL LOCKING HYVA tipping cylinder Type Alpha, suitable for high and low pressure ALU landing legs for full load 2x air vibrators under the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE with starting aid WABCO Trailer EBS with RSS anti-skid system WABCO Smartboard Automatic tipping lowering function Lifting and lowering device Tyres 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, immediately available from us in FULL-SERVICE RENTAL as well.

Stav: použitý, maximálna hmotnosť nákladu: 29 020 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2005, dĺžka ložného priestoru: 10 560 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 1 900 mm, Výbava: ABS, ID: 692731 ZDVIHATEĽNÁ NÁPRAVA, 50 m³ Pre viac informácií volajte: , Pre viac informácií volajte: 420734511212 Redpfxex Ia Rxo Afmel

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2007, objem nakladacieho priestoru: 50 m³, celková dĺžka: 10 710 mm, celková šírka: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65R22,5, rázvor náprav: 8 110 mm, farba: zelený, Rok výroby: 2007, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Hliníkové disky - Hliníková podlaha - EBS - Zadné dvere - Výsypné šupátko na obilie - Disky z ľahkých kovov - Riadená náprava - Vzduchové pruženie - Rolovacia plachta - kryt Redpfx Afox E N Nremjl - Nápravy SAF - Kotúčové brzdy = Poznámky = Stas S300CX Rok výroby: 2007 Objem: 50 m³ BPW nápravy, kotúčové brzdy Kombinácia klapky/dverí Hliníkové disky (Alcoa) Krytá plachta ABS/EBS NL Príves = Ďalšie informácie = Konfigurácia náprav: Rozmer pneumatík: 385/65R22,5 Brzdy: kotúčové brzdy Pruženie: vzduchové pruženie Zadná náprava 1: LM disky; Max. zaťaženie: 9 000 kg; Profil pneumatiky vľavo: 30 %; Profil pneumatiky vpravo: 30 % Zadná náprava 2: LM disky; Max. zaťaženie: 9 000 kg; Profil pneumatiky vľavo: 30 %; Profil pneumatiky vpravo: 30 % Zadná náprava 3: LM disky; Max. zaťaženie: 9 000 kg; Riadená; Profil pneumatiky vľavo: 30 %; Profil pneumatiky vpravo: 30 % Hmotnosti: Pohotovostná hmotnosť: 6 580 kg Užitočné zaťaženie: 36 420 kg Celková prípustná hmotnosť: 43 000 kg Stav: Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Poškodenia: žiadne Identifikácia: ŠPZ: OJ-28-PL Ďalšie informácie: Pre viac informácií kontaktujte Johna Hesselinka alebo Christel Hesselink. = Firemné informácie = Chcete financovať toto vozidlo? Žiadny problém. Rýchlo vám zariadime výhodný leasingový finančný kontrakt s dobou splatnosti 12, 24, 36, 48 alebo 60 mesiacov. Všetky fotografie a ďalšie informácie nájdete na alebo nás kontaktujte priamo.

Stav: použitý, maximálna hmotnosť nákladu: 29 920 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2008, ďalšia kontrola (TÜV): 01/2026, dĺžka ložného priestoru: 10 480 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 1 900 mm, objem nakladacieho priestoru: 50 m³, celková šírka: 2 550 mm, celková výška: 4 000 mm, Výbava: ABS, Aluminium box-shaped tipper body, approx. 50 m³, aluminium chassis, loaded fifth wheel height 1,225 mm, combination rear doors (double-wing doors with rotary bar lock / swinging tailgate), pneumatic tailgate lock, 1 x grain chute with cover, grain funnel, "EDBRO" tipping cylinder, sliding tarpaulin, aluminium landing legs, ABS, EBS, MERCEDES-BENZ axle(s), disc brake system, ALCOA aluminium rims, air suspension with lifting/lowering device, lift axle, 1x toolbox, vehicle may have advertising stickers and/or lettering applied. Our offer generally does not include a new technical inspection (TÜV). If a new TÜV inspection is required, we will be happy to provide you with a quote from our partner workshops! Vehicle may have advertising stickers and/or lettering applied. Our general terms and conditions of delivery and payment apply. Rsdextc I Iepfx Afmsl We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2021, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 675 mm, objem nakladacieho priestoru: 87 m³, Chassis Manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower boom for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc Brake 22.5" Jost axle assemblies 3 x 9 tons with DC air suspension, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle independently liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and Wheels 6 wheels with tires in size 385/65 R 22.5, manufacturer’s choice, on Alcoa aluminum rims, satin finish, 11.75x22.5 ET120 Landing Gear Aluminum drop-leg supports, manufacturer Alu Leg, with 2x10 tons support load, swing feet used for air suspension Brake System In accordance with EC regulations, dual-line brake system, EBS E system Wabco with RSS system (Roll Stability Support), spring actuated parking brake on two axles, operated at the rear, aluminum air reservoir system, premium modulator Electrical System In accordance with German road traffic licensing regulations (StVZO), with 2 LED five-chamber lights type Aspöck Europoint III integrated in the aluminum rear closure, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights laterally at the height of the landing gear, 1 LED work light inside front left controllable from the outside Body/Tipping Body “Body fully welded inside” Front wall load 17,250 daN, rear and side walls 10,250/13,400 daN. Aluminum tipping body, side walls 30 mm thick ALU plank profiles (2–3 mm), 600 mm wide, fully welded with lower and upper boom, plank profiles fully welded inside! Floor designed as moving floor system laid on 140 mm ALU cross members, cross members closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2–3 mm thick, straight version, special ALU corner profiles beveled, flat rear wall straight version with 2 ALU swing doors 50/30 mm thick, with 4 bolt locks fixed in welded ALU rear frame with Teflon and INOX bearings, continuous wall in reinforced ALU top boom with Kevlar tarpaulin for complete unloading, side brush sealing and additional Kevlar tarpaulin, integrated grain hopper with cover plate—operable from outside with inspection window at the rear left, 2 sample slides in the rear doors Rjdsxuy I Ispfx Afmol Hydraulic System “Cargo Floor” 24-board system Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles, approx. 880 PE-HD sliders, approx. 6 mm smooth floor, hydraulic stroke approx. 200 mm, fixed parts at the front wall, separate connection option for hydraulic line underneath the vehicle with fixed parts, pipe dimension NW 21, fixed parts to be specified by size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, control at the rear left with remote control in a lockable waterproof box, no hydraulic hoses Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, side ALU underrun protection in foldable design, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m ALU ladder, roll tarpaulin 680 g/m² quality with rolling tarpaulin system incl. side quick release via tarpaulin bar and a tension belt on the front wall, catwalk on the front wall with double ascent, 3 swiveling 70 mm thick A

Stav: použitý, maximálna hmotnosť nákladu: 33 707 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2025, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 8 912 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 2 285 mm, objem nakladacieho priestoru: 50 m³, celková šírka: 2 550 mm, celková výška: 3 672 mm, Rok výroby: 2025, Výbava: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" First registration 09/2025, condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis with cranked design Continuous 6 mm Hardox steel HB450 floor 4 crusher bars evenly distributed over the entire floor length, fully welded Front and side walls: 5 mm Hardox steel HB450 Inclined front wall, interior access ladder Deflector plates along the entire length of the side wall (for mudguard protection) Hydraulic tailgate (with pendulum function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure ALU landing legs, full-load capacity 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with traction aid WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights Rsdpfx Asxriu Eefmsl RENTING is the new BUYING – available immediately from us with FULL-SERVICE RENTAL.

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, objem nakladacieho priestoru: 50 m³, celková dĺžka: 11 490 mm, celková šírka: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65R22,5, rázvor náprav: 8 710 mm, farba: zelený, Rok výroby: 2012, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Alcoa Dura Bright disky - Hliníkové ráfiky - EBS - Zadné dvere - Zdvihacia náprava - LED svetlá - LED pracovné svetlá - Ľahké zliatinové disky - Vzduchové odpruženie - Rolovacia plachta – kryt - SAF nápravy - Kotúčové brzdy = Poznámky = Stas S300CX Rok výroby: 2012 50 m³ BPW nápravy, kotúčové brzdy Kombinácia klapky a dverí Hliníkové ráfiky Zakrytie plachtou ABS/EBS STK do 05/2025 = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 385/65R22.5 Značka náprav: BPW Brzdy: kotúčové brzdy Odpruženie: vzduchové odpruženie Rjdpfxoufqdmj Afmel Zadná náprava 1: Zliatinové disky; Max. zaťaženie nápravy: 9 000 kg; Profily pneumatík vlavo: 60 %, vpravo: 60 % Zadná náprava 2: Zliatinové disky; Max. zaťaženie nápravy: 9 000 kg; Profily pneumatík vlavo: 60 %, vpravo: 50 % Zadná náprava 3: Zliatinové disky; Max. zaťaženie nápravy: 9 000 kg; Profily pneumatík vlavo: 60 %, vpravo: 50 % Hmotnosti Prevádzková hmotnosť: 6 570 kg Nosnosť: 32 430 kg Celková prípustná hmotnosť: 39 000 kg Funkčné Sklápací mechanizmus: zadný Stav Technický stav: veľmi dobrý Optický stav: veľmi dobrý Identifikácia ŠPZ: OL-56-RN = Informácie o firme = Chcete financovať toto vozidlo? Nie je problém. Rýchlo pre vás vybavíme výhodný leasing s dobou splatnosti 12, 24, 36, 48 alebo 60 mesiacov. Všetky fotografie a ďalšie informácie nájdete na alebo nás kontaktujte priamo.

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2008, dĺžka ložného priestoru: 9 700 mm, šírka ložného priestoru: 2 350 mm, výška ložného priestoru: 2 165 mm, objem nakladacieho priestoru: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber bonded under pressure to the longitudinal beams, maximum stability through integrated tipping shaft with wear-resistant pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic tube, Axles and suspension, disc brakes Jost disc axle assemblies 3 x 9 tonnes with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% on silver steel rims, 11.75x22.5 ET 120 Landing gear Mechanical support legs, 2 x 20 t load capacity, for use with air suspension we use swinging feet, Braking system According to E.G. regulations, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), ALU air tank, Electrical system According to StVZO regulations with 2 five-chamber lamps type Aspöck LED, 24 volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with side LED marker lights, 2 position lamps, 2 separate LED reversing lights, Tipping body / trough ALU body, sides with welded vertical aluminium profiles, floor approx. 6 mm in high-wear-resistant alloy (5383H34), Brinell HB 110, front wall inclined construction in 4 mm ALU with reinforcement profiles for tipper cylinder mount, side walls in 3 mm hard alloy, rear wall straight, automatic-pneumatic (lockable) universal door with swing flap and tailgate 2/3-1/3 design with double hinge suspension made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic system Rsdpfx Afoxf Spfsmol Hydraulic cylinder mounted on the front wall with operating pressure of 150 bar, manufacturer Edbro, with approx. 2m hydraulic hose and 1" loose half Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced underrun protection, folding version with 2 towing eyes, side impact guard 1x folding, catwalk at the front wall with access ladder on the left, 3 ALU stanchions in swivel version, 1x central additional stanchion holder, roll tarp with an aluminium tube in the centre, roll tarp system, roll tarp approx. 660gr./m2 quality, tarp fastener with quick release (without tension straps), wheel wrench, 2x wheel chocks, toolbox type 800, continuous mudflap on underrun guard mounted, etc. Offer and pictures subject to change.

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2017, dĺžka ložného priestoru: 10 550 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 1 900 mm, objem nakladacieho priestoru: 50 m³, Chassis Light Version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc Brakes 430 mm "Off-Road Version" SAF-Intradisc axle units 3 x 9 t with SAF air suspension, airbags centrally arranged to the chassis longitudinal beams, 1st axle liftable with start-up aid and manual forced lowering, Smart Board Infocenter, raise/lower valve, 3rd axle with self-steering capability, electrically lockable, Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 approx. 40-50% tread, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI wheel bolts for aluminium rims Landing Legs Mechanical version with single-sided operation, two speed, with swivelling foot for air suspension, 2x20t static load Redpfxexf Sn Is Afmjl Brake System To EEC standard, dual line Wabco system, spring loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, aluminium air reservoir system Electrical System According to STVZO regulations with two five-chamber Aspöck Ecopoint 2 lamps, 24 Volt system with 2x7 and 1x15 pole sockets, with side marker lamps, 2 separate LED reversing lights at the rear, all air and electrical lines routed neatly in plastic ducts! Tipper Body/Container Body – Fully welded inside Aluminium tipper body, side walls made of 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded; floor 8 mm wear-resistant alloy (5383H34/HB 110); front wall 4 mm reinforced, straight design; rear wall as double wing doors, straight, with 2 half/half doors each with a grain chute, air vibrator under the floor with pneumatic control, rear board made of aluminium, swivellable, two hold-down devices with rubber buffers at the front wall on the frame for the tipper body, Hydraulic System – Tipping Cylinder with "Cardan" suspension, 7,630 mm lift Hydraulic ram mounted on the front wall with working pressure of 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete splash guards across full vehicle width mounted on side underrun protection, aluminium spare wheel holder, foldable side underrun protection on right side, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium centre pivot bows approx. 150 mm raised, tarpaulin with central light strip and separate reinforcements in wear zones, approx. 660 g/m2 quality with rolling system, all-round rubber cord at rear end of tarpaulin with two tension hooks to be fixed on the rear pivot bow, walkway on the body with access on left, tarpaulin closure on side with lashing straps, rear closure with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium with two towing eyes left and right incl. safety pin, 2 "Clear-Pass" splashguards on mudguard to EC standard, etc. Offer and pictures subject to change