Silo náves

FELDBINDER OMEPS CR 60

OMEPS Tipping Silo Trailer----Type: CR 60

Chassis:
Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tipping cylinder: Hyva

Axles and Suspension:
Disc brakes 22.5", SAF axle assemblies 3x 9t with air suspension, axle distance 2 x 1,310 mm, lift and lower valve, loading pressure gauge on the top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn

Wheels and Tyres:
6 wheels with 385/65 R22.5 tyres, manufacturer’s choice, mounted on Alcoa Dura Bright aluminium rims 11.75x 22.5 ET 120

Brake System:
EBS 4S/2M WABCO air brake system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected

Landing Legs:
Mechanical landing legs with two speeds, 2x 20t support load with swing foot, rear crank supports

Electrical System:
All lights in LED design, 24-volt electrical system comprising: one 15-pin socket mounted at the front of the fifth wheel on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear number plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights at the position of the pivot bearing in aluminium consoles according to standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning light at the rear, mounted at hose pipe height, 2x reversing lights in underrun protection, 2x reversing lights at support height (each switchable at the energy console)

Tank Construction:
A horizontal tank made from aluminium alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-compartment tank, with a capacity of 60,000 ltr., tank warranty: 24 months from delivery

Operating Parameters:
Pressure vessel compliant with Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80°

Filling Options:
5 manholes DN 450 with swivel and folding dome covers. Dome covers are sealed pressure-tight with 4 wing nuts each, rubber support for covers on top, rain bar closed at front, open at rear

Material Discharge:
1 material discharge cone DN 800 made from stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swivels to side, shut-off valve DN 150 with white seal, connection: STORZ-A

Air Piping:
One 2.5" stainless steel air manifold mounted right-hand side operating side, one 4" stainless steel air distribution pipe at the rear of the tank, air valves (shut-off valves) in INOX, upper air hose and air connection hoses with 2'' STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m before the pivot bearing

Ladder and Walkway:
1 aluminium ladder mounted at rear left of the vehicle, 1 aluminium safety scissor handrail with separate fold-out ladder section operable from below, held with parking brake when opened, 1 aluminium safety walkway runs along left top edge of the tank, anti-slip coating on the tank

Discharge Hose Storage:
Cpsdpfsx Nugdox Ag Tsu
4 discharge hose carriers, 5 m long DN 200 aluminium, with 4 hoses DN 100 and STORZ couplings, hose carrier with compressor hose D.76

Accessories:
The lateral underrun protection is made from anodised aluminium version

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.