Nízkopodlažný náves

LANGENDORF SATUE 40/48

Stav: použitý, maximálna hmotnosť nákladu: 56 200 kg, celková hmotnosť: 69 800 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2021, dĺžka ložného priestoru: 12 500 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 625 mm, Rok výroby: 2021, Výbava: ABS, FYAMONVILLE 4(2+2)-axle MULTIMAX low-bed semi-trailer, air-suspended, 2 self-tracking axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, first owner 4.1 m extension, fully hydraulic ramps and supports, wheel recesses, extensions, ALUMINIUM WHEELS, FULL EQUIPMENT!!! Gooseneck: Gooseneck SNT design approx. 3.7 m, chamfer approx. 1,000 mm x 10° Loading platform: Extendable loading platform, length approx. 8.8 m, chamfer approx. 500 mm x 10° Excavator bucket recess approx. 2490x750x210 mm Ramps: 1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward Axles and suspension: 4x BPW axles 12 t, 2 rigid, 2 self-tracking axles Electromagnetic reverse interlock reverse gear + manual Air suspension with lifting/lowering valve Tyres: 235/75 R17.5 3PMSF MICHELIN | PIRELLI Load index: 143/141J (144/144F), spare wheel NEW 16x powder-coated ALUMINIUM WHEELS Brake system WABCO, EBS-E EU regulations 24V lighting system by ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets 24N, 24S & 15-pin PAINTWORK Standard HRM metallization of external frame Complete steel construction shot-blasted, ARC-ZINC-COATED ZINACOR 850 (85% zinc - 15% aluminium) hot-refined Steel construction, steel grades: * S355J2+N/S355MC (yield strength 355MPa) * S690QL/S700MC (yield strength 690MPa) * Welders certified per DIN-EN 287-1 * MAG welding process per EN ISO 4063 * Shielding gas M21 per EN ISO 14175 Accessories: * Removable steel front wall, approx. 400 mm high * NATO socket + spiral cable Hjdoy Iq Arspfx Aqljfg * 3 kW electro-hydraulic unit for hydraulic functions * Spare wheel holder on the front wall * Mounting holes for bolted lashing rings * First hole approx. 200 mm from the front, then every 400 mm * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Mounting hole in the rear upper area of the outer beams * 1 pair of screw-in lashing rings (LC 10,000 daN) * Gooseneck approx. 40 mm thick hardwood flooring * 1 pair of removable aluminium side walls, aluminium rear wall approx. 400 mm high, anodized * 2-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * 4 wheel chocks with holders * Mounts for aluminium drive-on ramps * JOST mechanical landing gear with 2-speed gearbox and crank handle * Continuous hardwood flooring (approx. 50 mm) on loading platform, interrupted between the axles * Loading platform locking with conically welded locking profiles, 250 mm incl. pre-tensioning plate * Long holes for hook-in and repositionable bridging elements at the front of the loading platform * 1 intermediate table with stepped loading platform, approx. 300 mm wide for the extension tube * Front and rear with long holes for hook-in and repositionable bridging elements * Removable cover flush with loading platform * Extensions extendable approx. 230 mm per side * 1 pair of fixed open wheel recesses up to the extension, approx. 700 x 410 mm, in the loading platform before the 1st axle * Covers for wheel recesses longitudinally divided, with wooden covering, external with plug-in safety locks * Wheel recesses with metal covering and 15 x 15 mm square climbing bars every 200 mm * Between 2nd and 3rd axles, in the loading platform, 1 pair of fixed wheel recesses * 25 mm "Super Grip" rubber flooring and 5 mm metal floor as additional reinforcement on the chamfer of the loading platform * Control valves for the hydraulic ramps on the right and...