Nízkopodlažný náves

LANGENDORF S3L 2teilige Rampen Stielmulde

Stav: použitý, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2017, * Nápravy SAF * Kolískové vaničky * Hydraulické nakladacie rampy nastaviteľné na šírku * Vzduchové odpruženie * Rozšíriteľný * Pohotovostná hmotnosť: 11 020 kg Fedpfx Agewta Ale Tspc -----Interné číslo vozidla: 11010----Zmena a predaj počas inzerovania vyhradený. Podpora cez WhatsApp k dispozícii! V prípade otázok k vozidlu alebo ďalších informácií nás neváhajte kontaktovať cez WhatsApp. WhatsApp Nemecky, Anglicky -- WhatsApp Nemecky, Anglicky, Arabsky

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * TS 3 Profile 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco Plus axles * Air suspension with lifting and lowering function and RtR valve * Last axle is self-steering with electropneumatic steering lock * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * Side underrun protection * Landing gear at front and mechanical swing-down supports at rear of chassis * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon rear left * Mechanically adjustable warning panel sets at front and rear * Straight steel mudguards * Spare wheel carrier under chassis, right side * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, mounted on the sides of the fifth wheel platform * 150 mm high insertable rear panel * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and lowbed platform with 60 mm wooden planks * Chequer plate over the axles * 8 x mechanical fold-out extensions to achieve total width of 3 m (not in the rear slope, extension planks available and stored on the fifth wheel platform) * Load securing package: on the fifth wheel platform, 2 x 6.3 t lashing points each, and on the sides, 3 x 5 t lashing bars in the outer frame; on the lowbed platform, 2 x 13.4 t lashing rings per side and 4 x 10 t pivoting and lowerable lashing rings integrated into the outer frame; 2 x 6.4 t lashing eyes per side and 1 lashing point at the rear in the excavator stick recess * Excavator stick recess continuously from end of last rigid axle over steering axle up to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm * 2 x container locks directly after the gooseneck in the lowbed platform * Mechanical one-piece hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (manually adjustable sideways) * 4-way control block for future customer retrofit of hydraulic ramp shift * Outer plank on the ramp made of 50 mm hardwood * Hydraulic flow divider on trailer (for hydraulic pump delivery in truck between 40 l/min up to 120 l/min) * Loading area fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach ramp) * Fifth wheel height approx. 1,220 mm (suitable for 2- and 3-axle tractor units) Fpedpfx Aol Tnvgog Toc * Chassis, ramps, rear supports and extension consoles hot-dip galvanized * Axles, landing gears, air reservoirs painted in black tone * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and interim sale reserved * Available from week 16/2026

Stav: nový, maximálna hmotnosť nákladu: 38 000 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 180 mm, šírka ložného priestoru: 3 000 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, Výbava: ABS, HUMBAUR 3-axle low-bed semi-trailer with stepped loading platform, type HTS30K-V44+ --- INCLUDES lift axle INCLUDES trailing self-steering axle with SAF air suspension INCLUDES 3-meter widening package INCLUDES storage box under the loading platform INCLUDES TIM/WABCO smart board for axle load display INCLUDES fully hot-dip galvanized chassis INCLUDES aluminum side walls and storage box on the gooseneck platform INCLUDES stake pockets and tie-down package INCLUDES excavator trough Specification: V44+ * Perm. total weight: 48,000 kg * Payload approx. 38,000 kg * Chassis frame and ramps hot-dip galvanized by immersion * SAF air suspension unit including raise and lower function * INCLUDES fully hot-dip galvanized chassis * Lift axle with traction assist and self-steering trailing axle * EBS electronic braking system * WABCO smart board for axle load display * LED lighting system * Loading height: approx. 890 mm * Fifth wheel height: approx. 1,230 mm * Tires: 235/75R17.5 – 12 units * Low-bed length: approx. 8,680 mm incl. slope * Gooseneck platform length: approx. 3,500 mm incl. slope * Excavator trough * 2'' king pin longitudinally adjustable by 340 mm for 2+3 axle tractors * Gooseneck with 400 mm front wall * 400 mm aluminum side wall, foldable + toolbox with lid * Ramp rail at the step to the gooseneck * 3 pairs of 6-ton lashing rings recessed in the high bed * 3 pairs of 3-ton lashing points in the high bed outer frame * 5 pairs of 10-ton lashing rings recessed in the low bed * 3 pairs of 6-ton lashing eyes bolted to the outer frame * 3 pairs of stake pockets in the high bed outer frame * 5 pairs of stake pockets in the low bed outer frame * 3-meter widening package with folding outriggers, wooden planks * Steel toolbox under the loading platform, lockable, with side compartment for storing wooden planks * Warning kit with lighting * Rotating beacon at the rear * One-piece ramps approx. 3150 x 750 mm – approach angle approx. 10° * Softwood covering on ramps, low-bed & gooseneck platform Fedpfx Aekn N S Ujg Topc * Spring-lifting system for ramps * COC papers * 48,000 kg gross vehicle weight rating only with special permit according to §70 * Climbing strips on approach slope * Brake connections: red/yellow * Electrics: triple plug socket with 2x 7-pin sockets (1x ISO 1185 / 1x ISO 3731, 24V-N/24V-S) and 15-pin socket ISO 12098 --- Sample images – actual equipment may vary! *Stock vehicle – immediately available *Subject to prior sale *Ex works price

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco Plus axles * Air suspension with lifting and lowering system as well as RtR valve * Rear axle self-steering with electro-pneumatic steering lock * Smartboard control box mounted on trailer as infotool with pressure sensors for total axle load display * Side underrun protection * Landing legs at the front and mechanical swing-down supports at the rear of the chassis * 15-pin power connector * LED lighting system 12 / 24V * LED rotating beacon (removable) at the rear left * Mechanically adjustable warning sign packages front and rear Fpedpfx Agopk D I As Tsc * Straight steel mudguards * Spare wheel holder under the chassis on the right-hand side * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high, aluminum drop-sides (RAL 9010 pure white), foldable and removable, on the side of the fifth wheel platform * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and lowbed platform with 60 mm wooden planks * Treadplate above the axles * 8 x mechanical fold-out extensions to a total width of 3 m, but not on the rear slope (extension planks available with storage on fifth wheel platform) * Load securing package: on the fifth wheel platform 2 x 6.3 t lashing points each and 3 x 5 t lashing bars on each side in the outer frame; on the lowbed platform each side with 2 x 13.4 t lashing rings and 4 x 10 t swiveling and lowerable lashing rings integrated in outer frame; 2 x 6.4 t lashing rings per side and 1 lashing point at the excavator arm recess at the rear * Excavator arm recess runs continuously from end of last rigid axle over steering axle to end cross member with inner reinforcement profile approx. L = 2,450 x B = 770 mm x D = 270 mm * 2 x container locks directly after the swan neck in lowbed platform * Mechanically one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for subsequent customer retrofit of hydraulic ramp shift * The outer board on the ramp is made of 50 mm hardwood * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l/min up to 120 l/min) * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Fifth wheel height approx. 1,220 mm (suitable for 2- and 3-axle tractor units) * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted black * Hydraulic flow divider * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from 16/2026