Pracovná plošinová náves

FAYMONVILLE MAX Trailer MAX210 Telesattel

Stav: nový, maximálna hmotnosť nákladu: 38 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from equipment. Full specifications available upon request. Load Area: * Extendable load area with pneumatically operated locking mechanism * Load platform with approx. 30 mm thick hardwood floorboards * 7 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for hooking in tensioning straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Tyres: * Tyres: 385/65 R 22.5 Axles: * BPW axles and suspension, all axles hydro-mechanically steered * Equipped with disc brakes * Technical axle load: 10,000 kg (offset 0) * Air suspension with raise/lower valve Braking System: * WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * High-quality 2-component (2K) top coat, single colour, RAL 3002 Carmine Red Accessories: * Remote-controlled steering from the front and rear via cable remote (pushbutton operation), with single axle tracking control. (No installation in the tractor unit) * Electro-hydraulic power pack * 4 chocks with holders on the front wall * 2-inch kingpin * Yellow-red air couplings on the galvanized connection bar at the front * Bracket for beacon at the rear of the trailer Fgjdoxl Nf Dspfx Adlei * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the loading area, right side in direction of travel (without spare wheel) * Load gauge (manometer) for axle load determination, including load diagram Including Special Equipment: * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the load platform, suitable for 1 x 20' container, 2 x 20' containers or 1 x 40' container; when extended, additional locking position for a 45' container * 4 pairs of crosswise-mounted stake pocket rails in the load platform, for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes, screwed inside the front wall * Access ladders mounted left and right in direction of travel * 1 stainless steel (INOX) toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform, left side in direction of travel * 1 extra stainless steel (INOX) toolbox, approx. 1,200 x 460 x 550 mm, under the loading platform, left side in direction of travel * Load platform with approx. 30 mm thick wood floor enclosed in Omega profiles * Lifting axle on the front axle, controlled by TEBS E * BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease * 2 LED reversing spotlights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM metalization (High Resistance Metallization)

Stav: použitý, najazdené kilometre: 18 749 km, výkon: 400 kW (543,85 k), celková hmotnosť: 60 000 kg, typ paliva: nafta, farba: žltá, konfigurácia náprav: 3 nápravy, Rok výroby: 2019, prvá registrácia: 01/2019, celková šírka: 3 000 mm, celková výška: 4 000 mm, Výbava: ABS, sadzový filter, žeriav, Kranfahrgestell und Kranoberwagen: Motorabgasemission Stufe IV gemäß 97/68/EG und nach Stufe Tier 4-final gemäß EPA/CARB - Grundgerät Arbeitsausrüstung: Hakenflasche 71 t mit 3 Rollen und Doppelhaken, Hakenflasche 31,2 t mit 1 Rolle und Einfachhaken, Lasthaken 10,5 t, 2. Nackenrolle am Auslegerkopf Zusatzausrüstung Kranfahrgestell: Bereifung 445/95 R 25 (16.00 R 25), motorunabhängige Zusatzheizung inkl. Timer im Fahrerhaus, Anhängerkupplung D-Wert 19 inkl. ABV-Steckdose, kombinierter Staukasten für Anschlagmittel und Unterleghölzer, VarioBase – variable Abstützbasis, klimatisierter Fahrersitz mit Sitzheizung, Schlafliege im Fahrerhaus Zusatzausrüstung Kranoberwagen: motorunabhängige Zusatzheizung inkl. Timer in der Krankabine, Arbeitsbereichsbegrenzung, 2. Hubendschalter, zwei elektrisch verstellbare Arbeitsscheinwerfer am Anlenkstück, Flugwarnleuchte umschaltbar zwischen Dauerlicht und Blitz, klimatisierter Kranfahrersitz mit Sitzheizung, Notbetätigung der Kranhydraulik, Programmierung der LICCON für spätere Nachrüstung der Teleskopauslegerverlängerung, LICCON Datenlogger mit Auswertesoftware – Liftanalyser, LICCON-Einsatzplaner Betriebsstunden Kranoberwagen: 4.106 Std (06.2025) Betriebsstunden Kranfahrgestell: 1.247 Std (06.2025) Fgjdpfsuk Twhsx Adloi (In der Zwischenzeit wurde der Kran beschriftet.) Hüffermann Krandienst GmbH: wir handeln, wir vermieten, wir reparieren. Abrollanhänger, Abrollkipper, Müllsammelfahrzeuge, Autokrane und Arbeitsbühnen ... Kontaktieren Sie uns gerne! Das Angebot ist freibleibend, unverbindlich und ohne Gewähr. Zwischenverkauf vorbehalten. Für eine Reservierung ist eine Anzahlung von 10% des Kaufpreises erforderlich. Bis zur Gutschrift des Geldes auf unserem Konto besteht keine Reservierung und kein Anspruch auf Verfügbarkeit. Ein Kaufvertrag kommt erst mit vollständigem Zahlungseingang zustande. Das Fahrzeug bleibt bis zur vollständigen Bezahlung unser Eigentum. Wir akzeptieren nur Zahlungen in Euro, ohne zusätzliche Kosten für den Verkäufer, ausschließlich per Banküberweisung. Keine Schecks.

Stav: nový, maximálna hmotnosť nákladu: 38 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment. Full specification available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading deck fitted with approx. 30 mm thick wooden floorboards * 7 pairs of flip-out lashing rings (LC 5,000 daN) * 3 pairs of flip-out lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for hooking lashing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical), two-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 385/65 R 22.5 tyres, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via standardized EBS interface as per ISO 11992. The tractor unit must be capable of transmitting and displaying this data for correct display Axle: * BPW axles and suspension * All axles forced hydraulic steering * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tools Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Structure: * High-tensile fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system as per EU regulations * 24 Volt ASPÖCK-NORDIK (ASS3) LED lighting * All LED side marker lamps flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: * Complete steel structure automatically blast-cleaned after welding using a turbine blast machine * Second blasting with corundum for optimal coating adhesion * Top coat: 2 layers of 2K paint, single color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver gray * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not possible * Paint build-up tested in salt spray test to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holder on the front bulkhead * 2-inch king pin Fsdpfx Aew Tpr Iodlsgi * Galvanized connection rail at the front with yellow-red air couplings * Mounts for warning boards left and right on neck and rear, including socket * 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the loading platform * One galvanized steel front bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the platform for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; with additional locking position for a 45' container in the extension * 4 crosswise stake pocket strips in the platform for approx. 100 x 50 mm plug-in stanchions * Storage for up to 9 pairs of plug-in stanchions, bolted inside the front bulkhead * Climbing ladders mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted left-front under the loading platform * Additional INOX toolbox, approx. 1,200 x 46...

Stav: nový, maximálna hmotnosť nákladu: 34 660 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt of equipment. Full specification available on request. Loading platform * Double-extendable design with pneumatically operated locking mechanism * 2 pairs of flush-mounted lashing rings (LC 5,000 daN) * 1 pair of flush-mounted lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs * JOST mechanical landing legs, 2-speed gearbox, approx. 24 t lifting capacity (test load approx. 50 t) Tyres * 235/75 R 17.5, 3PMSF Axles * BPW axles, hydro-mechanically forced-steered * Air suspension with raise/lower valve Brake system * In accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel construction * Made from high-strength fine-grain steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component (2K) zinc dust primer * High-quality, single-color 2-component (2K) topcoat finish in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Rims in silver Incl. Accessories Fgsdpfx Adok Ugacoloi * Remote rear and front steering control via cable remote with push buttons, with single-track monitoring of the axles (without installation in tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2-inch kingpin * Yellow-red air couplings on the galvanized connection plate at the front * Yellow reflector tape according to EU regulations at the sides, extension and rear of the trailer * European reflective plates (red-yellow) at the rear of the trailer * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Loading platform with heavy-duty hardwood floor * 10 pairs of stake pockets for plug-in stakes 100 x 50 mm on the outer frame of the loading platform * Mounting bracket for beacon at the rear of the trailer * Galvanized supports under the tapered section of the loading platform * Mounting bracket for beacon at the rear of the trailer * Mounting rail for ALU drive-on ramps at the rear of the vehicle * 80 km/h speed stickers at the rear and both sides * Load gauge to determine axle loads incl. load diagram * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps, NLGI-2 standard grease, and removable protection around the pumps * Spiral cable to supply the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m, max. 250 A), between trailer and tractor unit with plug connection (NATO-NATO) * Painted sand layer on the central beam as anti-slip * 6 pairs of WADER container locks in the loading platform for 1 x 20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 5 transverse rows of stake pocket strips in the loading platform for plug-in stakes 100 x 50 mm * Storage for max. 9 pairs of plug-in stakes approx. 100x50 mm, inside front wall * One INOX toolbox, approx. 1,500 x 390 x 810 mm, under the loading platform, left and right in direction of travel * Four warning signs extendable by approx. 400 mm,

Stav: použitý, najazdené kilometre: 82 000 km, výkon: 353 kW (479,95 k), celková hmotnosť: 32 000 kg, typ paliva: nafta, brzdy: retardér, typ prevodu: mechanický, emisná trieda: Euro 6, prvá registrácia: 06/2014, Výbava: sadzový filter, žeriav, Žeriav: Retardér - Klimatizácia - Hydrodrive - Riadená náprava - Žeriav Effer 1355, podpera do X, 7400 hodín žeriavu. Odfuk: listová-vzduchová. Fjdpfjxtv S Tex Adlegi

Stav: použitý, najazdené kilometre: 280 163 km, zdvíhacia výška: 35 500 mm, Rok výroby: 2014, prevádzkové hodiny: 7 979 h, Pohon: koleso Hmotnosť bez nákladu: 31 787 kg Nosnosť: 15 000 kg Sériové číslo: 782002 Stav pneumatík vpredu: 90 Stav pneumatík vzadu: 90 Fedpfxswht U Rs Adlogi Prepravné rozmery (D x Š x V): 0x0x0 Pre viac informácií kontaktujte PFEIFER GROUP.