Müller-Mitteltal Tieflader T 4 Profi 40,0 Tiefladeranhänger Hydr. kúpiť použité (64 587)

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2020, ďalšia kontrola (TÜV): 02/2027, dĺžka ložného priestoru: 9 800 mm, šírka ložného priestoru: 2 520 mm, Výbava: ABS, * ABS * Zadná podpera * Nápravy BPW ECO-Plus Klodpfxjy T Dh Se Aqvot * Oranžové výstražné svetlo * Hliníkové disky * Duomatik vzduchová prípojka ----Nadstavba: Pozinkovaný nízkozdvižný príves (2500+7300mm)/Nakladacia výška cca 900 mm, vzadu znížený/Nábehová výška cca 770 mm, oceľové/drevené dno a protišmykový povrch, rozšíriteľný na 3 m, hydraulické nájazdové rampy (skladacie pre nízky nájazdový uhol) s protišmykovou úpravou, hydraulicky bočne posuvné, viazacie oká Predaj len podnikateľom. PRI EXPORTU JE POTREBNÁ IBA ČISTÁ CENA!!!! VŠETKY ÚDAJE BEZ ZÁRUKY VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok, predajných rozhovorov sú naše VOP (pozri tiráž).

Stav: použitý, pohotovostná hmotnosť: 8 850 kg, maximálna hmotnosť nákladu: 31 150 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2019, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Celková dĺžka ložnej plochy cca 9.500 mm, dĺžka ložnej plochy hlbokého lôžka cca 7.360 mm, nakladacia výška cca 910 mm, 14 párov kotviacich ôk, vozidlo ponúkané na zákazku. Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie. Viac údajov na vyžiadanie! Kljdpfx Aqoy Nixhovet

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with in-cab display via EBS signal – no installation needed on the truck side * Warning panel packages front & rear * Side and rear reflective contour tape * EBS multi-voltage system for 12 & 24 V electrics Kljdpfx Aqsrczm Dsvjt * Removable LED beacon rear * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel plate as well as basket-type spare wheel holder on the right side * Closed single plastic mudguards at front * Straight steel spray guards at rear, each with spray suppression * Side underrun protection * Extended offset cranked frame 500 mm forward * Turntable platform extended at the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lid * Chassis made of high-strength fine-grained steel * Floor above turntable platform made of 50 mm, and on the low-bed platform 60 mm conifer timber * Outer planks of loading ramps made of 50 mm bamboo wood * 4 pocket stakes each side (but no stakes included) with simultaneous 2 t lashing capacity * Lashing package consisting of: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and on each side 4 pairs of 10 t lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings at the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening boards stored on the left side in a storage compartment * Excavator arm rest above the rear axle up to the start of ramp slope approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic side-shift of the ramps on sliding tube from the ramp shaft * Load area above the turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (including 860 mm ramp slope) * Chassis, turntable, loading ramps and mechanical drop supports at rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Errors and subject to prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon (rear) * 24 V 15-pin as well as additional 12 V 7+4 pin power cables * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet as well as a basket-type spare wheel carrier mounted on the right side * Closed single plastic fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Offset crank extended 500 mm forward * Turntable platform extended 520 mm at the front with 45° corners and 3 recessed storage compartments including lid and lockable * Chassis made of high-tensile fine-grained steel * Decking above the turntable platform: 50 mm softwood, deep bed platform: 60 mm softwood * Outer planks on the loading ramps: 50 mm bamboo wood * 4 stake pockets per side (no stakes provided) with simultaneous 2 t lashing capability * Load securing package includes: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair each of 13.4 t lashing rings front and rear on the side outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of lashing rings 6.4 t on the side in the excavator arm tray, 8 pairs of galvanized folding outriggers for 3 mtr overall width (not provided at the rear slant) * Widening planks stored in a left-hand side compartment * Excavator arm tray above rear axle up to end of approach slant approx. 2,300 x 740 x 190 mm * Mechanical rear support legs * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft Kjdpfxel Th Eve Aqvjlt * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded floor height approx. 860 mm (including 860 mm approach slant) * Chassis, turntable, loading ramps, mechanical folding rear support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 820 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1980, dĺžka ložného priestoru: 9 700 mm, šírka ložného priestoru: 3 000 mm, celková šírka: 2 550 mm, celková výška: 900 mm, Rok výroby: 1980, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal T4 Low-loader Trailer * SAF axles with drum brakes * Twin tires * Low-bed with extendable loading platform Kjdsy Skl Iepfx Aqvslt * Hydraulic loading ramps, sliding (2 pieces) * Drivable gooseneck * Additional rear supports * Turntable/stanchion design ----Dimensions & Load Area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tires: 235/75R17.5 ----Vehicle number: 11892----Errors and prior sale excepted----Advertising and various lettering digitally removed. -----We are happy to assist you with all formalities related to the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following for a surcharge: ----Trade-in of your old vehicle TÜV/inspection certification Complete export processing Financing brokerage Application for export license plates Vehicle transfers Vehicle registration Vehicle recovery and transport ----Your VTS Team

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with indication in the truck via EBS signal (no installation required on truck side) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent mounting of container locks * Bolted 400 mm bulkhead made of smooth sheet * Bolted rear stakes * Drop sides with spring lifting assist ----Load securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 6.3 t lashing ring * Various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail in the longitudinal axis, center-mounted, for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating access ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l/min, up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black * Drop sides painted in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available at extra cost ----Information: * New vehicle with manufacturer's warranty Kljdpfsrwc R Rex Aqvot * Subject to error and prior sale ----Delivery time: * Immediately available ex works Egtsdorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: Ksdpfx Asrwc R Aoqvslt * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) * Side underrun protection Klodpel Tlhrefx Aqvot * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower function and RtR valve * Manometer pressure display for payload determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel skirts with spray protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Towing eye (50 mm) with height adjustment Kedpel Tnu Aefx Aqvslt * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front structure in front of the bogie platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the bogie platform's steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope) * Plank holder for extensions under chassis, left longitudinal direction * Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support * Hardwood flooring on running surfaces of low-loader platform * Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * Outer planks of loading ramps made of hardwood * Steel construction prepared for 6-position control valve * Unladen loading edge approx. 950 mm +/- 20 mm (chassis) * Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, towing eye assembly painted black-- * Tyres: 235/75 R 17.5 * Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, pohotovostná hmotnosť: 6 400 kg, maximálna hmotnosť nákladu: 23 600 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 7 800 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 920 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: na ceste / v tranzite, 3 osi, otočný oj, listové odpruženie, ABS (protiblokovací systém), uchytné oká, hydraulické nájazdové rampy, zadná podpera, bočné hliníkové ochranné kryty, dvojmontáž kolies. Nadstavba: 3-nápravový nízkopodlažný príves s hydraulickými nájazdovými rampami, pozinkované rampy, 3x 10t nápravy! Všetky údaje sú bez záruky, pretože vozidlo je na ceste! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a chyby vyhradené! Kjdpsy R Ekiofx Aqvslt

Stav: použitý, pohotovostná hmotnosť: 8 680 kg, maximálna hmotnosť nákladu: 31 320 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2018, zavesenie: iný, veľkosť pneumatiky: 235/75R17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5, veľkosť zadnej pneumatiky: 235/75R17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, ABS, rozšírenie s výstražnými tabuľami, vozidlo sa predáva na objednávku., -- Vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky --, Viac údajov na: !, More Details: ! Kodpfxoy T E His Aqvjlt

Stav: použitý, pohotovostná hmotnosť: 3 550 kg, maximálna hmotnosť nákladu: 10 850 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2012, ďalšia kontrola (TÜV): 04/2027, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 385/55R19,5 150J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/55R19,5 150J, veľkosť zadnej pneumatiky: 385/55R19,5 150J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, široké pneumatiky, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Kljdpfx Aqey R Dgiovst

Stav: použitý, pohotovostná hmotnosť: 3 680 kg, maximálna hmotnosť nákladu: 10 720 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 11/2021, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 385/55R19,5 156J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/55R19,5 156J, veľkosť zadnej pneumatiky: 385/55R19,5 156J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, AKO NOVÝ, široké pneumatiky, sklápačová plošina POZINKOVANÁ, 12 kotviacich ôk, bočnice 600 mm, príplatok za rampy 1.000 €, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na požiadanie! Kjdpfxsy N Rwfe Aqvslt

Stav: použitý, maximálna hmotnosť nákladu: 30 700 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2002, Výbava: ABS, * MüllerMitteltal 4-nápravový nízkozdvižný príves T40 * 2x riadené otočné nápravy * Nemecký príves * pero Kedpfx Aqsyuri Eovjlt * hydraulicky posuvné rampy / vľavo-vpravo * delené sklopné rampy * možnosť rozšírenia * ABS * BPW nápravy * 40 t * vlastná hmotnosť: 9300 kg * zaťaženie na nápravu = 10 t na nápravu * plne funkčný * pneumatiky v poriadku

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf Kljdpfsl Thxdex Aqvjt

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel Kjdpfjylfvmox Aqvslt ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized Klodpfx Aqsx Ipbgsvet * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t Kljdpex Ipb Hefx Aqvst * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: Kljdsylfvgjpfx Aqvot * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear Ksdpol Th Adofx Aqvolt * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, pohotovostná hmotnosť: 8 800 kg, maximálna hmotnosť nákladu: 31 200 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/1996, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 1 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 4 nápravy, otočný záves, listové odpruženie, rozšíriteľný na 3 m, upevňovacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná podpera, bočná hliníková ochrana, dvojmontáž pneumatík, úložný box. Nadstavba: 4-nápravový nízkoložný príves s hydraulickými dvojdielnymi rampami. Nakladacia výška cca 900 mm. 4x 10t náprava SAF, bubnové brzdy, ťažné oko 40 a 50 mm! Dĺžka horného plošiny cca 2900 mm! Dĺžka dolného plošiny cca 7100 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a omyly vyhradené! Kjdpfx Aqeywvhrsvolt

Stav: použitý, maximálna hmotnosť nákladu: 17 290 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2017, ďalšia kontrola (TÜV): 07/2026, dĺžka ložného priestoru: 8 900 mm, šírka ložného priestoru: 2 520 mm, Výbava: ABS, * ABS Klodpfx Aqeyulu Ujvjt * 5-komorové zadné svetlá * Oranžové výstražné majákové svetlo * Duomatik vzduchová prípojka * BPW-ECO nápravy ----Nadstavba: nízkopodlahový príves, pozinkovaný rám (1900+7000mm)/nakladacia výška cca 900mm, zadná časť skosená/nábehová výška cca 770mm, oceľovo-drevená podlaha, rozšíriteľná na 3 m, hydraulické nájazdové rampy (pozinkované) s protišmykovou vrstvou, aj hydraulicky posuvné do strán, upevňovacie oká Predaj len podnikateľom. PRI EXPORTE PLATÍ IBA ČISTÁ CENA!!!!! VŠETKY INFORMÁCIE BEZ ZÁRUKY VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok a predajných rozhovorov sú naše VOP (viď imprint).

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles Klsdol Th I Ajpfx Aqvet * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm Kledpfx Ajl Th Nnjqvot * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 Kjdpswmpbdjfx Aqvelt - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!