Müller-Mitteltal Eal-Ta-F kúpiť použité (33 779)
Zoradiť výsledky
- Najnižšia cena Najvyššia cena
- Najnovšie inzeráty Najstaršie inzeráty
- Najkratšia vzdialenosť Najväčšia vzdialenosť
- Najnovší rok výroby Najstarší rok výroby
- Najnovšia aktualizácia Najstaršia aktualizácia
- Výrobcovia od A po Z Výrobca od Z po A
- Relevantnosť
- Najnižšia cena
- Cena
- Najvyššia cena
- Cena
- Najnovšie inzeráty
- Dátum pridania
- Najstaršie inzeráty
- Dátum pridania
- Najkratšia vzdialenosť
- Vzdialenosť
- Najväčšia vzdialenosť
- Vzdialenosť
- Najnovší rok výroby
- Rok výroby
- Najstarší rok výroby
- Rok výroby
- Najnovšia aktualizácia
- Aktualizácia
- Najstaršia aktualizácia
- Aktualizácia
- Výrobcovia od A po Z
- Výrobca
- Výrobca od Z po A
- Výrobca
- Označenie od A po Z
- Označenie
- Označenie od Z po A
- Označenie
- Model od A po Z
- Model
- Model od Z do A
- Model
- Najnižšia referencia
- referencia
- Najvyššia referencia
- referencia
- Najkratšia doba prevádzky
- Prevádzková doba
- Najdlhšia doba prevádzky
- Prevádzková doba
- relevantnosť
- relevantnosť
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * Wabco EBS
* RDÜ (tire pressure monitoring system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem balancing unit
* Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* 15-pin electrical connector
* LED tail lights
* Hot-dip galvanized bolted underrun protection
* Side-mounted tool box, right, made of galvanized steel sheet
* Plastic quarter mudguards
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous side walls at the top with internal tube reinforcement, foldable without central stanchions, with drop side spring-assist
* Rear gate foldable and pivoting with manual central locking
* Hot-dip galvanized, bolted rear stanchions
* 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings each side integrated into the outer frame
* 4 mm fine grain steel plate floor
* Net hooks, rear mounting rail for loading ramps
* Prepared for subsequent installation of extension boards
* Reinforced body with load securing certificate according to EN 12642 XL
* 2-step entry on the left side as step-up aid
* 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment at the rear, recessed into the chassis below the loading area
* Axles, springs, air tanks, and landing gear painted black
* Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized
* New vehicle without first registration, with manufacturer’s warranty
Blsdpfx Aol Th A Eedveg
* Tyres: 385/55 R 22.5
* Side boards painted in RAL 9010 pure white
* Painting of the side walls in an RAL colour shade available at extra cost
* Errors and prior sale excepted
* Immediately available ex Egestorf
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * Wabco EBS (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release mechanism for spring brake chamber
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalization unit
* Height-adjustable drawbar (approx. 300 mm), hot-dip galvanized, with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* 15-pin electrical connector
* LED tail lights
* Hot-dip galvanized, bolted underride guard
* Lockable toolbox made of galvanized sheet steel, right side
* Plastic quarter mudguards
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous side walls with internal tube reinforcements (no centre stanchions), drop sides with sideboard spring assist
* Rear tailgate foldable and swinging with manual central locking
* Screwed, hot-dip galvanized rear stanchions
* Each corner fitted with one 5 t lashing point, each side with four 3 t lashing rings integrated in outer frame
* 4 mm fine-grain steel floor plate
* Net hooks, rear ramp mounting rail
* Preparation for later retrofitting of sideboard extensions
* Reinforced body with load securing certificate according to EN 12642 XL
Blodpfjv Dz N Nox Advsg
* 2-step access step on the left side as boarding aid
* 1 pair aluminium loading ramps, approx. 3570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment recessed under the load bed in the chassis
* Axles, springs, air tanks and landing gear painted in black
* Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized
* New vehicle without first registration, with manufacturer's warranty
* Tyres: 385/55 R 22.5
* Sideboard painting in RAL 9010 pure white
* Side wall painting in any RAL colour available at extra cost
* Errors and prior sale excepted
* Immediately available ex Egestorf
Malý inzerát
Egestorf
842 km
Roll off príves
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axles:
* 2 x t SAF axles
* 1st axle as a lift axle (fully automatic)
* Lift axle with +30 mm driving height via adjustment cylinder
* Start assist for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required; includes additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Drawbar Eye:
* 50 mm flanged screw-on drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12/24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Remote power supply 12+24V via tail light circuit
----General Attachments:
* BPW landing gear (front)
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond aluminum rims
* Detachable pin towing eye (usable only with retracted underrun protection)
* Closed plastic half-shell single mudguards
* Two-step access ladder in front of front wall, left side
* Shovel and broom holder in front of front wall
* 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor), rated for 180 bar (for tractor operation)
* Double-acting control circuit for hydraulic tailgate (installed front right) with remote control operation
----Hook Lift:
* Palfinger PHT 20 SCASNSLD5 telescopic hook lift (serial no. 100746129, year 2023)
* Base frame made of high-strength fine grain steel
* 20,000 kg pulling force
* Hook height: 1,570 mm
* Hooklift control via remote control
* Remote control with quick function for lowering, but not for lifting
* Emergency stop switches on left and right sides
* Container platform with 4 lateral supports per side and 1 roller at the rear per side
* Hydraulic rear lock
* 2 additional hydraulic cylinders to support the main boom lifting
* 2 x mechanical drop-down rear supports
* Approved for 20 t GVW (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside of the charging cradle, the service brake must be applied for remote activation; brake connections must remain permanently connected to open the hydraulically/pneumatically controlled valves
* Monitoring system for underrun protection to ensure it is retracted during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized
* Axles, air tanks, front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
Blodpfox Dp Atex Adveg
* Vehicle is available immediately
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0
----Brake System:
* Wabco EBS-E braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x t SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with +30 mm driving height via adjustment cylinder
* Start-up aid for manoeuvring and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange-bolted towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power plug
* 3-pin 12V auxiliary plug
* LED lighting system 12/24V
* 2 LED reversing lights activated by reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connector cables for agricultural and forestry vehicles
* Wireless power supply 12+24 V via tail lights
----General Fittings:
* BPW landing gear at front
* Manually extendable underride guard for container lengths over 6,000 mm
* Speedline diamond aluminium rims
* Pin-lock tow coupling (use only with underride guard pushed in)
* Enclosed plastic half-shell individual mudguards
* Two-step access before the front bulkhead on the left
* Shovel and broom holder in front of the front bulkhead
* 2 stainless steel toolboxes – matt – approx. 650 x 350 x 320 mm, fitted right side
* Enclosed side guard usable as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right front) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hookloader (Serial no. 100746129, year 2023)
Bodpfx Adjx Dp Agjvslg
* Base frame made of high-strength fine-grained steel
* 20,000 kg tractive force
* Hook height 1,570 mm
* Hookloader control via remote control
* Remote control with quick function for lowering only, not for picking up
* Emergency stop switches on both left and right sides
* Container mountings with 4 supports each side and 1 roller at rear
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist with main arm lifting
* 2 x mechanical drop-down rear supports
* Certified for 20 t total weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the docking station, the service brake must be applied to enable wireless operation. Brake connections must remain permanently connected to allow the hydraulic/pneumatic valves to operate.
* Monitoring system for underride guard ensuring it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access steps, underride guard, and mechanical supports galvanised
* Axles, air tank, and front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is immediately available
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axles:
* 2 x t SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with ride height +30 mm via positioning cylinder
* Traction aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable control in the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange-mounted towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load
----Electrics / Lighting:
* 15-pin power plug
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24 V electrics
* Extended connection lines for agricultural and forestry vehicles
* Power supply to remote control 12+24 V via tail light
----General Attachments:
* BPW landing leg at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Detachable tow pin coupling (usable only when underrun protection is retracted)
* Closed plastic single-splashguard fenders
* Two-step access in front of the front wall on the left
* Shovel and broom holder in front of the front wall
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, right side
* Closed side underrun protection usable as advertising space
----Hydraulics:
* 2-circuit hydraulic connectors (engine side from truck/tractor) designed for 180 bar (tractor operation)
Bodpfxsx Dp Ame Advolg
* Double-acting control circuit for hydraulic tailgate (installed front right) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame made of high-strength fine-grain steel
* 20,000 kg tensile force
* Hook height 1,570 mm
* Hooklift control via remote control
* Remote control with rapid function for tipping off, but not for lifting
* Emergency stop switches on both the left and right sides
* Container supports with 4 rests each side plus 1 roller each at rear
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 x mechanical drop-down supports at the rear
* Approval for 20 t gross weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be activated to enable radio release. Brake couplings must remain permanently connected to operate the hydraulic/pneumatically controlled valves.
* Monitoring system for underrun protection—ensures retraction during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access step, underrun protection, and drop-down supports hot-dip galvanized
* Axles, air tanks, and front landing leg painted in a shade of black
* Palfinger hooklift painted black/yellow
----Info:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Container: Dimensions:
* Cargo length: 5,500 mm
* Cargo width: 2,300 mm
* Cargo height: 1,000 mm
Info:
* Mounting brackets for hook systems according to...
Malý inzerát
Egestorf
841 km
Príves s pracovnou plošinou
MÜLLER-MITTELTALPT40 Sonderpreis, Tieflader mit hydr. Rampen
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lifting and lowering system as well as RtR valve
* Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits)
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning panel sets front and rear
* Front axle with plastic quarter mudguards and splash guards
* Rear axle with straight galvanized steel skirts and splash guards
* Reflective contour tape on sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12 / 24 V
* Removable LED rotating beacon at rear
* 2 LED reversing lights (activated via reverse gear)
* Coupling bar with 50 mm towing eye and height adjustment
* Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Extension in front of the turntable platform, approx. 490 mm long with 45° corners
* ROBOT-welded anti-slip coating on the turntable platform steel plate
* Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility
* Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope)
* Board holder for extensions under the chassis on the left side in longitudinal direction
* Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray
* Hardwood flooring on the running surfaces of the low-bed platform
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways
* Outer planks of the loading ramps made from hardwood
* Steel construction prepared for 6-way control valves
* Loading edge unloaded approx. 950 mm +/+ 20 mm chassis
* Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized
* --Axles, air tanks, drawbar painted in black--
* Tyres: 235/75 R 17.5
* Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used
* New vehicle with manufacturer's warranty
Bedpfx Adsl Tlhrsvolg
* Errors and interim sale excepted
* Immediately available ex stock Egestorf
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4:
----Braking system:
* Wabco ABS braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalising assembly
----Drawbar / Flange towing eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolted towing eye
----General attachments:
* Jost landing gear at front
* Side underrun protection
* Folding A-plate at rear
----Electrics / Lighting:
* 15-pin electrical plug
* Multi-chamber tail lights
----Superstructure:
* Fixed steel front and side panels
* Removable steel rear panel
* Floor made of 50 mm softwood
* 1 sliding plate support 750 x 1,000 mm at the front, incl. 2 drop-in skip stops at the front in 2 positions
* Rear crossmember for fitting aluminium drive-on ramps, incl. 2 additional rear supports
----Loading edge:
* Unladen loading height approx. 710 mm
----Load securing:
Bsdpfsl Th Eysx Advjlg
* 4 repositionable skip stops (fit in 2 positions) for lateral centering of skips
* Each side with 1 x (13.5 t) UVV lashing ring for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Painting:
* Chassis, front panel, side panels, mudguards, drawbar, rear supports hot-dip galvanized
* The axles, springs, landing gear, and air tanks painted in black
----General information:
* Vehicle registered for one day 06/2024, not loaded/used due to missing tyre pressure monitoring system
* Errors and prior sale reserved
----Delivery time:
* Available immediately from Egestorf, A7
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4:
* Wabco ABS system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 tonne Gigant axles
* Parabolic suspension with tandem equalizer unit
* Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis
* 15-pin electrical connector
* Multi-chamber tail lights
* Bolt-on underride protection
* Plastic quarter mudguards
* Net hooks at each position of the central locking, plus 2 on the front wall
* Chassis made of fine-grain steel
* Steel pallet 3-way tipper body, continuous side panels with internal tube reinforcements, drop sides without central stanchions, foldable with side wall spring lifts
* Bolted rear stanchions
* Combination steel wing doors at the rear, asymmetrically split 2-wing design, can pivot and lock at 270°, not foldable, with additional pendulum frame for automatic rear wall opening during tipping operation, locking via galvanized rotary rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open
* Each corner fitted with one 5-ton lashing point, four 3-ton lashing rings recessed into the outer frame on each side
* 4 mm fine-grain steel floor plate
* Rear mounting rail for loading ramps
* Reinforced superstructure with load securing certificate
* 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 tons per pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment for ramps recessed into the chassis below the loading surface, accessible from the rear
* Chassis, drawbar, underride guard, rear stanchion and folding supports at the rear hot-dip galvanized
* Axles, springs, air tank, and landing gear painted in black
* Tyres: 285/70 R19.5
* Side panels painted to RAL 9010 pure white
* Painting of side walls in other RAL colours possible at extra cost
Bedpfx Aol Th Htjdvolg
* Vehicle has a day permit (unused)
* Errors and prior sale excepted
* Immediately available ex Egestorf
Malý inzerát
Egestorf
842 km
Príves
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4:
----Brzdy:
* Wabco ABS brzdový systém
* Nouzové odjištění pružinových válců
* Bubnové brzdy
----Nápravy:
* 2 x 7 t nápravy Gigant
----Pérování:
* Parabolické pružiny s tandemovým vyrovnávacím agregátem
----Tažná oj / Tažné oko:
* Výškově nastavitelná tažná oj (+/- 150 mm)
* 40 mm šroubovací tažné oko
----Obecné přídavné díly:
* Přední opěrná noha Jost
* Boční ochrana proti podjetí
* Sklopný zadní A-štít
----Elektroinstalace / Osvětlení:
* 15-pólová zásuvka
* Vícekomorová zadní světla
----Nadstavba:
Bodpjl Th Dmofx Advolg
* Pevné ocelové čelní a boční stěny
* Odnímatelná ocelová zadní stěna
* Podlaha z jehličnatého dřeva, tl. 50 mm
* 1 kluzná plechová vložka 750 x 1 000 mm v přední části včetně dvou zasouvacích držáků korby vpředu (2 polohy)
* Zadní příčník pro uložení hliníkových najížděcích ramp včetně dvou přídavných opěr vzadu
----Nakládací hrana:
* Výška nezatížené nakládací hrany cca 710 mm
----Zajištění nákladu:
* 4 přestavitelné zásuvné dorazy v 2 polohách pro boční centrování korby
* Bočně vždy 1x (13,5 t) UVV uchycení pro zavěšení napínacích prvků
* 2 ráčnové napínače (seřizování vřetenem) s kompenzačním řetězem a rychlozkracovačem (napínací síla 6 300 kg)
----Pneumatiky:
* Pneumatiky: 285/70R19.5
----Rozvor:
* Rozvor: 1 140 mm
----Lakování:
* Podvozek, čelní stěna, boční stěny, blatníky, tažná oj a zadní opěry žárově zinkované
* Nápravy, pružiny, opěrná noha a vzdušníky lakované v černé barvě
----Obecné informace:
* Vozidlo má denní registraci 06/2024, kvůli chybějícímu systému monitorování tlaku v pneumatikách nebylo zatěžováno ani používáno
* Změny, chyby a mezitímní prodej vyhrazeny
----Dostupnost:
* K dispozici ihned z Egestorfu u dálnice A7
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTALPT 40 Sonderpreis, Tieflader mit hydr. Rampen
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lift/lower function and RtR valve
* Manometer pressure display for payload determination (axles separated on 2 air suspension circuits)
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning board packages front and rear
* Front axle plastic quarter mudguards with spray protection
* Rear axle straight galvanized steel skirts with spray protection
* Reflective contour tape on the sides and rear
* EBS multi-voltage system with 12 & 24 V electrical system
* 15-pin power connector
* LED lighting system 12 / 24 V
* Removable LED beacon at the rear
* 2 LED reversing lights (activated by reverse gear)
* Towing eye (50 mm) with height adjustment
* Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Front structure in front of the bogie platform, approx. 490 mm long with 45° corners
* ROBOT-welded anti-slip coating on the bogie platform's steel plate
* Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility
* Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope)
* Plank holder for extensions under chassis, left longitudinal direction
* Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support
* Hardwood flooring on running surfaces of low-loader platform
* Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally
* Outer planks of loading ramps made of hardwood
* Steel construction prepared for 6-position control valve
* Unladen loading edge approx. 950 mm +/- 20 mm (chassis)
* Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized
* --Axles, air tanks, towing eye assembly painted black--
* Tyres: 235/75 R 17.5
* Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
Bsdpfel Tnu Aox Advolg
* Immediately available ex Egestorf
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4:
* Wabco ABS
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalization unit
* Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* Two mechanical folding support legs at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm mounted on the front right-hand side of the chassis
* 15-pin electrical plug
* Multi-chamber tail lights
* Bolt-on underrun protection
* Plastic quarter fenders
* Lashing hooks located at the central locking bearings and 2 pieces at the front wall
* Chassis made of fine-grain steel
* Steel pallet three-way tipper body with continuous side walls, top edge reinforced with inner tubes, without center posts, side walls foldable with board wall spring lifting device
* Rear posts bolted
* Combination steel wing doors at rear; 2-leaf, asymmetrically split, can be swivelled and locked to 270°, cannot be folded – with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation function for automatic rear wall opening during rear tipping with open wing door
* Each corner fitted with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame on each side
* 4 mm steel floor made of fine-grain steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps recessed under the load floor at the rear of the chassis
* Chassis, drawbar, underrun protection, rear posts, and rear folding supports hot-dip galvanized
Bjdpsl Th Duofx Advolg
* Axles, springs, air tanks, and landing gear painted black
* Tyres: 285/70 R19.5
* Sideboard painting in RAL 9010 pure white
* Side wall painting in a RAL color of your choice available at extra cost
* Vehicle has a one-day registration (not in use)
* Subject to errors and prior sale
* Immediately available from Egestorf
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 620 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9:
----Braking system:
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----General Accessories:
* Jost mechanical landing leg at the front
* Two mechanical, hot-dip galvanized folding supports at the rear
* Galvanized sheet steel toolbox, installed on the right side
* Hot-dip galvanized bolted underrun protection
* Plastic quarter mudguards
----Tipping Platform Body:
* Net hooks mounted laterally and at the rear in the central locking mounts, plus 3 hooks on the front wall
* Hot-dip galvanized chassis
* Steel pallet-wide 3-way tipper body
* Full-length drop sides, no center stanchions, with tailboard spring lifters
* Drop-down and swinging rear flap via manual central locking
* Bolted, hot-dip galvanized rear stanchions
* 4 mm steel floor plate
* Prepared for later retrofitting of side extension boards
* Platform length: 5.5 meters
----Load Securing:
* One 5 t lashing ring in each corner
Blodpjm Angvofx Advog
* Four 3 t recessed lashing rings per side in the outer frame
----Ramps:
* Rear mounting track for drive-on ramps
* One pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment integrated under the loading platform in the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in a shade of black
* Platform body color: RAL 9010 pure white
* Painting of side walls and tipper body in any RAL color available at extra cost
----Additional information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex works Egestorf, near the A7 motorway
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 620 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9:
—Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
—Axles:
* 2 x 5.5 t Gigant axles
—Suspension:
* Parabolic springs with tandem equalizer unit
—Drawbar / Flange Eye:
* Height-adjustable drawbar (hot-dip galvanized, adjustable by 300 mm) with 40 mm flange eye
—Electrics / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pin power connector
* LED tail lights
—General Attachments:
* Jost mechanical landing leg at the front
* Two mechanical hot-dip galvanized foldable supports at the rear
* Tool box made of galvanized sheet steel, mounted right side
* Hot-dip galvanized bolt-on underrun protection
* Tool box made of galvanized sheet steel, mounted right side
* Plastic quarter mudguards
—Tipping Platform:
* Mesh hooks on the sides and rear in the central locking mounts, plus 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipping body
* Continuous drop sides without center stanchions, foldable with sideboard spring assist
* Tailgate foldable or swinging, operated via manual central locking
* Bolted, hot-dip galvanized rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of side wall extensions
* 5.5 m platform length
—Load Securing:
* Each corner fitted with one 5 t lashing point
* Four 3 t lashing rings per side, mounted flush in the outer frame
—Ramps:
* Rear mounting rail for drive-on ramps
* Pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the load bed, integrated into the chassis from the rear
—Wheelbase:
* Wheelbase: 990 mm
Bedpfxjl Thx Eo Advolg
—Tyres:
* Tyres: 235/75 R17.5
—Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Platform superstructure color: RAL 9010 pure white
* Custom painting of side walls and tipping bridge in other RAL colors available at extra cost
—Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer's warranty
* Subject to errors and prior sale
—Delivery Time:
* Immediately available ex Egestorf, A7
Malý inzerát
Schlierbach
747 km
Nízky nakladač
Müller-MitteltalT4 4-Achs Tieflader Radmulden luftgefedert T4 4...
Zavolať
Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá
- 4 x vzduchom odpružené GIGANT - nápravy
- vzduchové odpruženie
- 4 x kolískové lôžka na kolesá
- mechanické nájazdové rampy
- 2 zadné podpery, sklopné
- výsuvné výstražné tabule
Blsdpjwmpbdofx Advsg
- ABS
- Pneumatiky MICHELIN: 235/75 R 17.5
- Ťažké prevedenie: 40.000 kg celková hmotnosť
- Pohotovostná hmotnosť: 8.400 kg
- Celková dĺžka: 11.750 mm
- Ťažné oko: 50 mm
Obzvlášť vhodný na prepravu fréz na vápno!
- Nemecký príves
- STK/ kontrola bezpečnosti na želanie a za príplatok možná!
Možné chyby a medzi-predaj vyhradený!
Malý inzerát
Bovenden
769 km
Roll off príves
Müller-MitteltalTRA-Kombi 18,0 Abroll/Absetz/Tieflader
Zavolať
Stav: použitý, pohotovostná hmotnosť: 5 100 kg, maximálna hmotnosť nákladu: 12 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/1998, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 1 mm, celková dĺžka: 2 550 mm, celková šírka: 1 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, rázvor náprav: 5 400 mm, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, container locks, underrun protection, pneumatically adjustable drawbar, side aluminium side guard, twin tyres, storage box, removable side panels.
Wheelbase: 5400 mm. Body: Trailer for hooklift containers in lengths from 6m to 6.75m. SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for insertable locking hooks, 4x pockets for insertable container centring and skip stops. The trailer can also be used as a flatbed! Aluminium side panels with a height of 600mm are included with the trailer.
Bodpfoi Rpxwsx Advjlg
Loading ramps available at an additional net price of €900. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to alterations, prior sale, and errors.
Malý inzerát
Bovenden
769 km
Nízkozdvižný príves
Müller-MitteltalPT 30,0 Kompakt, verbr. auf 3m
Zavolať
Stav: použitý, pohotovostná hmotnosť: 6 250 kg, maximálna hmotnosť nákladu: 23 750 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2008, dĺžka ložného priestoru: 8 300 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 930 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, 3-nápravový, vlek s točňou, listové odpruženie, ABS (protiblokovací systém), rozšíriteľný na 3 m, kotviace oká, mechanické nájazdové rampy, zadná podpera, bočný hliníkový ochranný kryt, dvojmontáž pneumatik, úložný box
Blsdoxvzq Hopfx Advog
Nástavba: 3-nápravový nízkozdvižný príves s mechanickými nájazdovými rampami, 3x 10t Gigant nápravy, bubnové brzdy, rozšíriteľný na 3 m!
Dĺžka rámp cca 2900 mm! Údaje o príslušenstve sú bez záruky, zmeny, predaj a chyby vyhradené!
Malý inzerát
Reutlingen
770 km
Nízkozdvižný príves
MÜLLER-MITTELTALTandem Anhänger mit Rampen
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 4 500 kg, celková hmotnosť: 6 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/1979, ďalšia kontrola (TÜV): 04/2026, dĺžka ložného priestoru: 4 000 mm, šírka ložného priestoru: 1 900 mm, výška ložného priestoru: 380 mm, celková šírka: 2 500 mm, celková výška: 3 000 mm, Rok výroby: 1979,
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 780 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 Masterline:
----Brzdy:
* EBS brzdový systém
* Nouzové uvolnění pro pružinové válce
* Bubnové brzdy
----Nápravy:
* 2x 5,5 t BPW nápravy
----Pérování:
* Parabolické pružiny s tandemovým vyrovnávacím agregátem
----Tažné oko / tažná tyč:
* Výškově stavitelná tažná tyč, žárově zinkovaná, nastavitelná o 300 mm s 40mm přírubovým tažným okem
----Obecné příslušenství:
* Jost mechanická opěrná noha vpředu
* vzadu 2 mechanické, žárově zinkované sklopné podpěry
* Nářadový box z pozinkovaného ocelového plechu na pravé straně
* Plastové čtvrtkrytky kol
----Elektroinstalace / osvětlení:
* Systém pro kontrolu tlaku v pneumatikách (RDÜ)
* 15 pólová elektrická zástrčka
* Šroubovaný podjezdový ochranný rám s LED koncovými světly
----Sklápěcí korba:
* Háčky pro síť na bocích a vzadu v ložiskách centrálního zamykání a 3 ks vně na čelní stěně
* Podvozek žárově zinkovaný
* Kompletně pozinkovaná ocelová sklápěcí nástavba na 3 strany
* Sklopné postranní stěny v celku bez středového sloupku s pomocí zvedáků bočnic
* Zadní stěna sklopná i kyvně otevíratelná přes manuální centrální zamykání
* Zadní sloupek šroubovaný, žárově zinkovaný
----Zajištění nákladu:
* V každém rohu 1x zapuštěné, sklopné kotvící oko 5 t, dále na každé straně rámu 4x zapuštěné, sklopné kotvící oka 3 t
* Podlaha z ocelového plechu tl. 4 mm, vzadu příprava pro nájezdové rampy
----RAMPY:
Bedpepk D D Ujfx Advolg
* 1 pár hliníkových nájezdových ramp cca 3 570 x 400 mm (nosnost 8 t / pár) vhodné pro gumové i pásové stroje
* Uzamykatelný úložný prostor pod ložnou plochou v rámu vozidla přístupný zezadu
----Pneumatiky:
* Pneumatiky 235/75 R 17,5
----Lakování:
* Nápravy, pružiny, vzduchojem, tažná tyč a opěrná noha lakovány černou barvou
* Vozidlo je žárově zinkováno
----Informace:
* Zesílená nástavba s certifikátem o zajištění nákladu dle EN 12642 XL
* Nové vozidlo s tovární zárukou
* Změny, omyly a mezitímní prodej vyhrazeny
----Dodací lhůta:
* K okamžitému odběru v Egestorf u dálnice A7
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 780 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 Masterline:
----Brzdy:
* EBS brzdový systém
* Nouzové uvolnění pro pružinové válce
* Bubnové brzdy
----Nápravy:
* 2x 5,5 t BPW nápravy
----Pérování:
* Parabolické pružiny s tandemovým vyrovnávacím agregátem
----Tažné oko / tažná tyč:
* Výškově stavitelná tažná tyč, žárově zinkovaná, nastavitelná o 300 mm s 40mm přírubovým tažným okem
----Obecné příslušenství:
* Jost mechanická opěrná noha vpředu
* vzadu 2 mechanické, žárově zinkované sklopné podpěry
* Nářadový box z pozinkovaného ocelového plechu na pravé straně
* Plastové čtvrtkrytky kol
----Elektroinstalace / osvětlení:
* Systém pro kontrolu tlaku v pneumatikách (RDÜ)
* 15 pólová elektrická zástrčka
* Šroubovaný podjezdový ochranný rám s LED koncovými světly
----Sklápěcí korba:
* Háčky pro síť na bocích a vzadu v ložiskách centrálního zamykání a 3 ks vně na čelní stěně
* Podvozek žárově zinkovaný
* Kompletně pozinkovaná ocelová sklápěcí nástavba na 3 strany
* Sklopné postranní stěny v celku bez středového sloupku s pomocí zvedáků bočnic
* Zadní stěna sklopná i kyvně otevíratelná přes manuální centrální zamykání
* Zadní sloupek šroubovaný, žárově zinkovaný
Blsdpfxopk D Dmj Advsg
----Zajištění nákladu:
* V každém rohu 1x zapuštěné, sklopné kotvící oko 5 t, dále na každé straně rámu 4x zapuštěné, sklopné kotvící oka 3 t
* Podlaha z ocelového plechu tl. 4 mm, vzadu příprava pro nájezdové rampy
----RAMPY:
* 1 pár hliníkových nájezdových ramp cca 3 570 x 400 mm (nosnost 8 t / pár) vhodné pro gumové i pásové stroje
* Uzamykatelný úložný prostor pod ložnou plochou v rámu vozidla přístupný zezadu
----Pneumatiky:
* Pneumatiky 235/75 R 17,5
----Lakování:
* Nápravy, pružiny, vzduchojem, tažná tyč a opěrná noha lakovány černou barvou
* Vozidlo je žárově zinkováno
----Informace:
* Zesílená nástavba s certifikátem o zajištění nákladu dle EN 12642 XL
* Nové vozidlo s tovární zárukou
* Změny, omyly a mezitímní prodej vyhrazeny
----Dodací lhůta:
* K okamžitému odběru v Egestorf u dálnice A7
Malý inzerát
Coppenbrügge
815 km
Cisterna
Müller-MitteltalCHK Vakuumfass mit Pumpe
Zavolať
Stav: použitý, Rok výroby: 2010, Vákuová cisterna cca 6 m³, vhodná pre Müller-Mitteltal CHK. Vrátane vývodovým hriadeľom poháňanej vákuovej pumpy a rôznych hadíc.
Vákuová pumpa
Bledpfx Adjx Nl Npjvog
= Ďalšie informácie =
Pre viac informácií kontaktujte Jan-Marc Schwickert.
Malý inzerát
Coppenbrügge
815 km
Preprava kontajnerov
Müller-MitteltalCHK - diverse Container
Zavolať
Stav: použitý, Rok výroby: 2013, Rôzne kontajnery pre Müller-Mitteltal CHK:
- 7 ks 4,5 - 5 m³, cena za kus 1.000,- €
- 3 ks 8 m³, cena za kus 2.000,- €
Bedpfexb N A Iox Advjlg
Všetky kontajnery sú v prevádzkyschopnom stave. Roky výroby 2013 - 2015.
= Ďalšie informácie =
Krajina výroby: DE
Pre viac informácií kontaktujte Jan-Marc Schwickert.
Pečať dôvery
Predajcovia certifikovaní spoločnosťou TruckScout24

Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 670 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline:
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange Drawbar Eye:
Bodpsq Hg Dxofx Advelg
* Height-adjustable (300 mm), hot-dip galvanized drawbar with 40 mm flange drawbar eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
----General Attachments:
* Tool box made of galvanized sheet steel, mounted on the right-hand side
* Bolted underride guard
* Plastic quarter mudguards
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
----Tipper Platform:
* Lashing hooks on the sides and rear in the central locking mounts plus 3 pieces externally on the front wall
* Hot-dip galvanized chassis
* Steel platform, 3-way tipper body
* Continuous side walls without central stanchion, foldable with drop-side spring lifts
* Rear tailgate foldable or swinging via manual central locking
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load Securing:
* One 5 t recessed, foldable lashing ring in each corner
* Four 3 t recessed, foldable lashing rings on each side, integrated into the outer frame
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area in the chassis at the rear
----Tyres:
* 235/75 R 17.5 tyres
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing gear painted black
* Drop-sides painted RAL 9010 pure white
* Painting of side walls in a RAL colour of your choice available at extra cost
* Floor and front wall hot-dip galvanized
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Availability:
* Immediately available from Egestorf
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 600 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline:
----Braking system:
* Wabco EBS
* Emergency release device for spring actuators
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / Flange Towing Eye:
* Hot-dip galvanized drawbar, height-adjustable by 300 mm, with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
----General attachments:
* Toolbox made of galvanized sheet steel, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing gear at the front
* At the rear, 2 mechanical hot-dip galvanized drop-down supports
----Tipping platform:
* Net hooks on the sides and rear in the central locking bearings, as well as 3 units on the outside of the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous drop sides without central stanchion, foldable with drop-side spring assist
* Rear gate foldable and pendulum-mounted via manual central locking
* Hot-dip galvanized bolted rear stanchion
* 4 mm steel floor
* Rear guide rail for loading ramps
----Load securing:
* Each corner with 1 x 5 t retractable and foldable lashing ring
* Additionally, each side with 4 x 3 t recessed and foldable lashing rings in the outer frame
----Ramps:
* 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading platform, integrated into the chassis, accessible from the rear
----Tyres:
* Tyres 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Side board painted in RAL 9010 pure white
* Painting of the side walls in RAL color shade available at extra cost
* Floor and front wall hot-dip galvanized
----Info:
* Reinforced bodywork with load securing certificate according to EN 12642 XL
Blodpfxsv Dz N Aj Adveg
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex works Egestorf
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, *KA-TA-R 11.9 Masterline*
----Brakes:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (300 mm) with 40 mm flange eye
----Electrics / Lighting:
* RDÜ tyre pressure monitoring system
* Multi-voltage
Bljdpfjq Euagjx Advsg
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* 2 mechanical drop-down supports at the rear
* Plastic toolbox, right side
* Two-step entry on the front left (direction of travel)
* Bolt-on underrun protection
* Plastic quarter mudguards
----Tipper Body:
* Lashing hooks on the sides and rear at the central locking mounts, plus 2 on the front wall
* Steel pallet – 3-way tipper body (continuous side walls – no intermediate stanchions – foldable with folding wall spring lifter), tailgate can fold down and swing via manual central locking
* 4 mm steel floor
* Fitting rail at the rear for loading ramps
----Load Securing:
* One 5 t lashing point in each corner
* Four 3 t lashing rings per side, recessed into the outer frame
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading bed at the rear, integrated in the chassis
----Tyres:
* 385/55 R 19.5 tyres
----Paint:
* Chassis, drawbar, tipper body, front wall, side boards, drop-down supports and rear stanchions hot-dip galvanized
* Axles, springs, air tanks, flange eye and landing gear painted black
* Side boards hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2025, * KA-TA-R 11.9 Masterline
Bedpsl Thw Isfx Advolg
----Brakes:
* Wabco EBS
* Emergency manual release for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensation unit
----Drawbar / Flange Coupling Eye:
* Height-adjustable drawbar (300 mm) with 40 mm flange coupling eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin electrical connector
* Additional 13-pin 12V cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED taillights
----General attachments:
* Mechanical support winch at the front
* Two mechanical folding support legs at the rear
* Side-mounted plastic toolbox on the right
* Two-step front left access step (in direction of travel)
* Bolt-on underrun protection
* Plastic quarter mudguards
----Tipping body:
* Net hooks on the sides and rear at the central locking mounts, plus 2 on the front wall
* Steel pallet 3-way tipper body (continuous side walls—no centre stakes—fold-down with side wall spring lifters, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor plate
* Rear mounting rail for loading ramps
----Load securing:
* 1 x 5 t lashing ring in each corner
* Plus 4 x 3 t flush-mounted lashing rings per side in the outer frame
----Ramps:
* 1 pair aluminium loading ramps approx. 3,310 x 400 mm (capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment beneath the loading area at the rear, integrated in the chassis
----Tyres:
* Tyres 385/55 R 19.5
----Finish:
* Chassis, drawbar, tipper body, front wall, side walls, folding support legs, and rear stakes hot-dip galvanised
* Axles, springs, air tanks, flange coupling eye, and support winch painted in black
* Side walls hot-dip galvanised
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Uľahčujeme vám vyhľadávanie: "müller-mitteltal eal-ta-f"
Okamžite a bezplatne dostanete nové ponuky e-mailom.
Vyhľadávaciu úlohu môžete kedykoľvek jednoducho ukončiť.


Mesačne viac ako 140 000 dopytov na kúpu
Informujte sa teraz
+49 201 858 95 507
























































































































































































































































































































































































































































