Müller-Mitteltal 19 To. Tandemtieflader Mit Auffahrrampe Neu kúpiť použité (28 912)

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon (rear) * 24 V 15-pin as well as additional 12 V 7+4 pin power cables * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet as well as a basket-type spare wheel carrier mounted on the right side * Closed single plastic fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Offset crank extended 500 mm forward * Turntable platform extended 520 mm at the front with 45° corners and 3 recessed storage compartments including lid and lockable * Chassis made of high-tensile fine-grained steel * Decking above the turntable platform: 50 mm softwood, deep bed platform: 60 mm softwood * Outer planks on the loading ramps: 50 mm bamboo wood * 4 stake pockets per side (no stakes provided) with simultaneous 2 t lashing capability * Load securing package includes: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair each of 13.4 t lashing rings front and rear on the side outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of lashing rings 6.4 t on the side in the excavator arm tray, 8 pairs of galvanized folding outriggers for 3 mtr overall width (not provided at the rear slant) * Widening planks stored in a left-hand side compartment * Excavator arm tray above rear axle up to end of approach slant approx. 2,300 x 740 x 190 mm Podpfxol Th Evs Acfjpt * Mechanical rear support legs * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded floor height approx. 860 mm (including 860 mm approach slant) * Chassis, turntable, loading ramps, mechanical folding rear support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/1992, Rok výroby: 1992, Výbava: ABS, Hrubá hmotnosť: 3.140 kg Užitočné zaťaženie: 14.860 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Psdpfxsxt Sd Ss Acfjpt Predajná cena: € 1.500, US$ 1.747

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS = Ďalšie informácie = Ppjdpext Rw Rsfx Acfjt Hrubá hmotnosť: 4.600 kg Užitočné zaťaženie: 13.400 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 6.500, US$ 7.571

Stav: použitý, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, celková šírka: 2 550 mm, celková výška: 3 700 mm, Výbava: ABS, Nemecký príves, * 30-tonový * Rozšíriteľný na 3 metre * Pružinové nájazdy * Ťažné oko 50 mm * Vzduchové odpruženie Ppedpfx Acoy Trntsfot Ďalšie informácie telefonicky u Christiana Bredemeiera.

Stav: použitý, maximálna hmotnosť nákladu: 18 200 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2002, ďalšia kontrola (TÜV): 10/2026, dĺžka ložného priestoru: 8 400 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková hmotnosť: 24 000kg/ 30 000kg Prevádzková hmotnosť: 5 800kg Užitočná hmotnosť: 18 200kg/ 24 200kg Nakladacia dĺžka: celková cca 8 400mm/ cca 6 200mm hlboké lôžko vrátane zadného nádstavca Šírka: 2 550mm / nakladacia šírka cca 2 520mm Nakladacia výška: 900mm Ďalšie informácie - pružinové rampy - dvojmontáž pneumatík - LED cúvacie svetlo - veľký balík uchytení - výrez v prehnutí Pjdpfxoy Uqprj Acfspt

Stav: použitý, maximálna hmotnosť nákladu: 18 050 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2010, šírka ložného priestoru: 2 520 mm, Výbava: ABS, ? Pružinové nájazdové rampy ? Držiak rezervného kolesa ? Na každej strane: 7 x upevňovacie oká Ppodpfxjy T Tvxo Acfet ? Na každej strane: 4 x kapsy na stĺpiky ? Ťažné oko 50 mm ? Nakladacia výška: cca 910 mm ? Bubnová brzda ? ABS ? Listové pruženie ? EBS ? Dvojmontáž kolies Všetky údaje bez záruky / Predbežný predaj vyhradený.

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, celková šírka: 2 550 mm, celková výška: 970 mm, Rok výroby: 2026, Výbava: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 Truck Tandem Three-Way Tipper - Tipper body dimensions: 5,000 x 2,420 mm (internal clearance) - Side wall height: 500 mm - Floor made of fine-grained steel S 420 MC, 4 mm thick - Side walls laser-welded from high-tensile fine-grained steel, fixed front wall - 2 pairs of folding lashing rings with a lashing capacity (LC) of 5,000 daN, 1 pair each recessed front and rear in the steel floor. 4 pairs of folding lashing rings with LC 3,000 daN recessed in the steel floor. - Net hooks integrated on both sides and rear in the side wall mounts and in the front wall - Reinforced and certified body according to EN 12642 XL - 2 LED reversing spotlights at the rear of the trailer Ppodpey S Nwvsfx Acfot - Aluminium loading ramps without wheel groove, suitable for rubber-tyred and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm - Plastic toolbox - Aluminium air reservoir - BPW axle, with S-cam brake - Tyres: 235/75R17.5 Suitable for a coupling height of approx. 925 mm unladen +/- 150 mm Subject to prior sale and errors! Sale exclusively based on our General Terms and Conditions. Important Notice – Please Read: Despite careful checking of all details stated in our offer, errors may occur. In some cases, such errors arise from data transmission systems of various platform providers. Therefore, we point out that all details are provided without guarantee and do not constitute a legally binding claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information intended to initiate a contract. The information provided here is non-binding and does not represent warranted characteristics.

Stav: použitý, maximálna hmotnosť nákladu: 29 750 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2010, ďalšia kontrola (TÜV): 05/2026, Rozmer-B 11 750 mm Prevádzková hmotnosť 10 250 kg Zaťaženie nápravy 2 x 10 000 kg Dĺžka ložnej plochy nad točnicou 2 400 mm vrátane 350 mm skosenia Dĺžka ložnej plochy 7 700 mm vrátane 900 mm skosenia Nakladacia výška 880 mm Šírka 2 550 mm, rozšíriteľná na 3 000 mm Vybranie pre uloženie ramena rýpadla (d x š x v cca 2 500 x 740 x 180 mm) SAF nápravy so vzduchovým odpružením Dvojdielne hydraulické nájazdové rampy, 2 100 mm + 2 000 mm dlhé, 650 mm široké vrátane Rampy hydraulicky nastaviteľné Hydraulické podperné nohy vzadu Prelis na kolesá za druhou nápravou Prelis na predné koleso, horná dĺžka cca 2 000 mm x 1 100 mm, spodná hĺbka cca 350 mm Prelisy na kolesá medzi 3. a 4. nápravou Pedpfx Aoxpmmmocfopt Prelis na zadné koleso, horná dĺžka cca 1 300 mm x 550 mm, spodná hĺbka cca 220 mm

Stav: použitý, pohotovostná hmotnosť: 6 400 kg, maximálna hmotnosť nákladu: 23 600 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 7 800 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 920 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: na ceste / v tranzite, 3 osi, otočný oj, listové odpruženie, ABS (protiblokovací systém), uchytné oká, hydraulické nájazdové rampy, zadná podpera, bočné hliníkové ochranné kryty, dvojmontáž kolies. Nadstavba: 3-nápravový nízkopodlažný príves s hydraulickými nájazdovými rampami, pozinkované rampy, 3x 10t nápravy! Všetky údaje sú bez záruky, pretože vozidlo je na ceste! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a chyby vyhradené! Ppedpfx Acoy R Ekiefet

Stav: použitý, prvá registrácia: 10/2013, Rok výroby: 2013, ABS, EBS, automatické napínače tiahla, 2x 10 t nápravy (BPW), vzduchové odpruženie, bubnové brzdy, pružinová parkovacia brzda na zadnej náprave, pneumaticky znížiteľné ťažné zariadenie, odľahčovací ventil na prednej náprave, račňové napínadlo, hydraulické bočné uchytenie, uzatvorený úložný box, dva cúvacie svetlá, box na sieť, držiak rezervného kolesa, uzatvorená bočná ochrana, pevná zadná ochrana proti podjazdu, zadný záster na ochrane proti podjazdu, skladací A-štít, objem korby 2x10 m³ ASK-mulda. EXW 27793 Wildeshausen Ppsdpfx Asy S Sx Necfet K dispozícii ihneď

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader. ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), displayable in the truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel sheet * Spare wheel holder in basket design, installed on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic bump stops * Foldable A-sign at rear ----Loading Platform: * Hot-dip galvanized main frame with elevated outer frame for guiding roll containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport: container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical drop-in stop angles at the front of the track * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of skips; front 4 skip stops plug-in with swinging stop * Weld bead as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; four lashing brackets in cloverleaf design per side * 1 pair of 13.4 t UVV lashing rings at the front Ppsdpol Tld Iefx Acfet * Four 8 t lashing eyes per side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on the sides and rear * Hot-dip galvanized frame * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Gross vehicle weight rating (GVWR): technically up to 20,000 kg * New vehicle without initial registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: použitý, maximálna hmotnosť nákladu: 6 800 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 04/2026, Müller-Mitteltal KWH 9.9 ML Cable Transport Trailer with Diesel Engine * Model: KWH 9.9 ML * Drum brake system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic leaf springs * Rear square tube supports with spring assistance, base plate, and safety locking pins for adjustable support heights * Drawbar with 40 mm or 50 mm bolt-on towing eye (height adjustable) * Bracket for additional drawbar mounted on the right side of the towing device in the driving direction * Chassis made of torsion-resistant square tubing and cross beams * Plastic toolbox * LED lighting * Swiveling cable drum frame consisting of base frame, rotary bearings, and drum carrier arms * Carrier arm ends with locking closure for securing the drum shaft * Central claw lock secures the swiveling cable drum frame to the chassis Pedpfxoy R Ipnj Acfspt * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * For drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulically operated pull and push cylinders with load holding valve * Control valve with automatic neutral position and pressure relief valve * Connectors, hoses, and pipes of hydraulic system NW 13 * Required oil capacity approx. 10 liters * Drum drive is motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic power unit with diesel engine and hand starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines can be provided either by truck hydraulics or power unit * Weather protection cover, hot-dip galvanized without top coat * Tires: 315/80 R22.5 Subject to prior sale and errors! Sale exclusively according to our terms and conditions. Important note: Despite careful verification of all details in our offer, errors may occur. Some may be caused by transfer errors in the systems of different platform providers. Therefore, please note that all information is given without obligation and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for contract initiation. All details provided are without guarantee and do not represent warranted characteristics.

Stav: použitý, maximálna hmotnosť nákladu: 6 940 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2018, ďalšia kontrola (TÜV): 11/2026, dĺžka ložného priestoru: 5 360 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 350 mm, celková šírka: 2 550 mm, Výbava: ABS, Vybavenie: * Oko 40 mm s čeľusťovou spojkou, * výškovo nastaviteľné ťažné oko, * bočné steny sklopné, * úložný box, * zadná stena zasúvateľná, * ťažné oká, * nápravy BPW, * pozinkované prevedenie, Iné: * 1 predchádzajúci majiteľ, * prvá dodávka v Nemecku, * zníženie nosnosti z 11,9 t na 10,0 t bez technických úprav, Od roku 1972 Váš spoľahlivý partner v oblasti automobilov a úžitkových vozidiel v 28832 Achim pri Bremer Kreuz. Centrum úžitkových vozidiel Behnke má stále skladom cca 200 vozidiel z oblastí dodávok, úžitkových vozidiel a stavebných strojov! Pedpjy Si Etefx Acfspt Ponúkame vám priebežne atraktívne možnosti financovania za výhodné špeciálne podmienky. V prípade záujmu vám radi vypracujeme individuálnu ponuku! Vaše úžitkové vozidlo alebo stavebný stroj radi vezmeme do protihodnoty. Ak si prajete nové schválenie TÜV, radi vám sprostredkujeme ponuku od našich partnerských dielní. Naša ponuka je vo všeobecnosti BEZ nového schválenia TÜV. Doručenie vášho „nového“ úžitkového vozidla je možné za príplatok prostredníctvom našich externých partnerov. Uvedené údaje v inzerátoch, na internete, cenovkách a obrázkoch sú nezáväzné popisy a nepredstavujú garantované vlastnosti. Predávajúci nepreberá zodpovednosť/ručenie za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné v prípade záujmu osobitne preveriť. Zmena, chyba a predaj vyhradené.

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: Ppedpfx Acjl Tnwzjfjt * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: použitý, maximálna hmotnosť nákladu: 39 500 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2010, ďalšia kontrola (TÜV): 12/2026, dĺžka ložného priestoru: 9 345 mm, Rok výroby: 2010, * Müller Mitteltal T50 Kompakt * Nízka nakladacia plošina (tieflader) * Rámpy * Pneumatiky: viď fotografie * 5 náprav * Gigant nápravy * Povolená celková hmotnosť: 50 000 kg * Pohotovostná hmotnosť: 10 500 kg * Užitočné zaťaženie: 39 500 kg Ppedpfsyzlyxex Acfst * Vzduchové odpruženie * Okamžite k dispozícii * Možnosť chyby vyhradená Máte otázky? Kontaktujte nás pre rýchlu konzultáciu, prípadne priamo cez WhatsApp: Ponúkame: Čistý nákup pre firmy z EÚ s platným IČ DPH, rovnako aj pre zákazníkov z tretích krajín. Možnosť leasingu a financovania. Zabezpečenie všetkých colných formalít. Vystavenie krátkodobých a vývozných ŠPZ. Doprava do prístavu. Všetky ceny na portáli Kleinanzeigen sú uvedené ako ceny s DPH a zahŕňajú zákonnú DPH vo výške 19 %.

Stav: použitý, maximálna hmotnosť nákladu: 16 950 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2006, ďalšia kontrola (TÜV): 04/2026, Rok výroby: 2006, * Müller Mitteltal T3 NG * Low-bed trailer * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Subject to errors and prior sale Do you have any questions? Contact us for a quick consultation—feel free to reach out directly via WhatsApp: We offer: Net purchase for companies within the EU holding a VAT ID number and for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of temporary and export license plates. Transport to the port. Ppedpfxsyv Ug De Acfst All prices advertised are gross prices and already include the statutory VAT of 19%.

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now available immediately in RAL 7016 Anthracite, Ref. for inquiries: 11653 * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL including load securing certificate * 6.27 m x 2.47 m x 0.4 m steel side walls, laser-welded, foldable, with 2 spring supports * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized), inserted in front of the ramps with empty holder behind the front wall * Rear stanchions bolted (hot-dip galvanized) * Softwood floor, 50 mm thick * 4 pcs. UVV lashing rings LC 6300 daN recessed in the front and rear cross member * 10 pcs. UVV lashing brackets LC 3000 daN recessed in the existing hole grid in the outer frame * Ramps: one-piece, with hot-dip galvanized grating in anti-slip design * Preparation in front of the front wall for subsequent installation of container locks * Plastic toolbox mounted in front of the front wall * Chassis and tow bar (hot-dip galvanized) * 235/75 R17.5 (dual tires), parabolic springs * BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt Pjdpfxsyxbdbe Acfept * Side marker lights with integrated indicator function * 1 removable round LED beacon (warning light) including bracket and installation ---- * Trade-in possible * Financing through our partners possible with or without down payment or residual value and various terms. Request a quote from us! ---- * Leasing example from our partner FM LeasingPartner: €485/month net for 60 months with no down payment and "0" Euro residual. Other terms with or without down payment/residual value possible. Request a quote from us! We are authorized Müller-Mitteltal dealers! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 * Outside these hours, viewings are possible by appointment. * We speak German, English, Russian, Polish, and French.

Stav: nový, maximálna hmotnosť nákladu: 11 050 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal KA-TA-R 14.4 tandem low-bed three-way tipper trailer with ramps * NEW VEHICLE * Now available immediately in RAL 9016 traffic white, * Leasing, financing, trade-in of your old trailer possible ---- * Reference number for inquiries: 11654 ---- * Remote diagnostics unit (RDÜ) with display option in truck via EBS signal * Side marker lights with blinker control * Gross weight: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor 5m x 2.42m, drop sides 0.5m laser-welded, swingable, foldable and removable, prepared for later installation of extension sides * Lockable compartment under the tipping platform for loading ramp * Including 1 pair of aluminum approach ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashings LC 5000daN front and rear + 8 lashing rings LC 3000daN recessed and foldable in the tipper floor (centered) * Excavator bucket rest made of hardwood Ppjdpfxoyvxg Ie Acfet * Two-step access ladder in front of the front wall (hot-dip galvanized) * Stepless height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (set of 4), parabolic springs * Net hooks, screw-on rear stanchions, hot-dip galvanized * Guide cables for the rear drop side * Plastic toolbox on right-hand side of chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer ---- * Lease-purchase price: * e.g., 560¤ for 60 months with no down payment, no residual value. An offer from our financing partner 'FM LeasingPartner.' Other terms with/without residual value or down payment possible * Request an offer from us! * We are Müller-Mitteltal authorized dealers * Free home delivery possible with timely order! ----Our opening hours Monday - Thursday: 08:00 - 17:00 Friday 08:00 - 15:00 Outside these hours, we are available by arrangement. We speak German, English, Polish, French. Whatsapp

Stav: použitý, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 14 700 kg, prvá registrácia: 02/2001, ďalšia kontrola (TÜV): 10/2024, celková šírka: 25 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17.5 / 10mm, veľkosť prednej pneumatiky: 235 / 75 R 17.5 / 10mm, prevádzková hmotnosť: 24 000 kg,

Stav: použitý, pohotovostná hmotnosť: 4 500 kg, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2015, ďalšia kontrola (TÜV): 07/2025, dĺžka ložného priestoru: 4 800 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 1 000 mm, farba: modrá, Rok výroby: 2015, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * Nemecký príves * Stav podľa fotografií * Müller-Mitteltal trojstranný sklápací príves, typ KA-TA-R 18,0 Tandem * Rozmery sklápanej korby: 4 800 x 2 400 x 1 000 mm * Rolovacia plachta * Vzduchové odpruženie * Kotúčové brzdy * Podesta * Podpera Jost * Nosnosť 13 500 kg V prípade záujmu o novú technickú kontrolu (TÜV) Vám radi pripravíme ponuku od našich partnerských servisov. Naša ponuka je VŽDY BEZ novej technickej kontroly (TÜV), bez novej DGUV, bez novej SP a bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej webovej stránke. Hovoríme týmito jazykmi: nemecky, anglicky, poľsky, turecky. Upozornenie: Dôrazne odporúčame a ponúkame možnosť obhliadky a kontroly tovaru, aby nevznikli nesprávne predstavy o stave a vhodnosti produktu. Obhliadky a kontroly sú možné kedykoľvek po dohode a sú výslovne žiadané. Ppjdowz H Nbopfx Acfst Všetky informácie sú bez záruky. Za chyby alebo omyly v ponuke nepreberáme zodpovednosť. Kupujúci je povinný sa osobne presvedčiť o stave a výbave tovaru / vozidiel. Zmeny, medzipredaj a omyly vyhradené.

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection Pjdpfewh Hdxsx Acfept * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t, Gigant nápravy * Parabolické pružiny s vyrovnávacou jednotkou * Ťažná tyč výškovo nastaviteľná cca 300 mm * BPW podperná kľuka * Zadné mechanické podperné nohy * Plastová skrinka na náradie vpredu vpravo na čelnej stene * Bočná ochrana proti nárazu * LED osvetlenie * Podlaha z ihličnatého dreva hrúbky 50 mm * Po jednom kotevnom oku 6,3 t v rohoch pri čelnej stene a zadnom priečniku, ďalšie 2 kotevné oká UVV 6,3 t po bokoch v vonkajšom ráme * Jednodielne mechanické rampy z roštového materiálu s pružinou na obsluhu jednou osobou cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a ťažná tyč žiarovo zinkované * Nápravy, pružiny, vzduchové nádoby a predná podperná kľuka lakované v odtieni čiernej Ppodjwyhzvjpfx Acfet * Nové vozidlo s plnou zárukou výrobcu * Zmeny a medzipredaj vyhradené * Dostupné cca od 35. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector Ppjdsylfvmspfx Acfet * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): Ppodpfx Ael Tnvgocfjt * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm Ppsdpfxeylfvgj Acfjt ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026