Müller-Mitteltal 19 To. Tandemtieflader Mit Auffahrrampe Neu kúpiť použité (28 912)

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x t SAF axles * 1st axle as a lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start assist for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required; includes additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flanged screw-on drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12/24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Remote power supply 12+24V via tail light circuit ----General Attachments: * BPW landing gear (front) * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Detachable pin towing eye (usable only with retracted underrun protection) * Closed plastic half-shell single mudguards * Two-step access ladder in front of front wall, left side * Shovel and broom holder in front of front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side impact protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor), rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) with remote control operation ----Hook Lift: * Palfinger PHT 20 SCASNSLD5 telescopic hook lift (serial no. 100746129, year 2023) * Base frame made of high-strength fine grain steel * 20,000 kg pulling force * Hook height: 1,570 mm * Hooklift control via remote control * Remote control with quick function for lowering, but not for lifting * Emergency stop switches on left and right sides * Container platform with 4 lateral supports per side and 1 roller at the rear per side * Hydraulic rear lock * 2 additional hydraulic cylinders to support the main boom lifting * 2 x mechanical drop-down rear supports Pedpfx Aex Dp Atecfspt * Approved for 20 t GVW (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside of the charging cradle, the service brake must be applied for remote activation; brake connections must remain permanently connected to open the hydraulically/pneumatically controlled valves * Monitoring system for underrun protection to ensure it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brake System: * Wabco EBS-E braking system Pjdpfx Acex Dp Agsfspt * Emergency release device for spring-actuated cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start-up aid for manoeuvring and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-bolted towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12/24V * 2 LED reversing lights activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connector cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via tail lights ----General Fittings: * BPW landing gear at front * Manually extendable underride guard for container lengths over 6,000 mm * Speedline diamond aluminium rims * Pin-lock tow coupling (use only with underride guard pushed in) * Enclosed plastic half-shell individual mudguards * Two-step access before the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes – matt – approx. 650 x 350 x 320 mm, fitted right side * Enclosed side guard usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hookloader (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg tractive force * Hook height 1,570 mm * Hookloader control via remote control * Remote control with quick function for lowering only, not for picking up * Emergency stop switches on both left and right sides * Container mountings with 4 supports each side and 1 roller at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting * 2 x mechanical drop-down rear supports * Certified for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the docking station, the service brake must be applied to enable wireless operation. Brake connections must remain permanently connected to allow the hydraulic/pneumatic valves to operate. * Monitoring system for underride guard ensuring it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underride guard, and mechanical supports galvanised * Axles, air tank, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4: ----Braking system: * Wabco ABS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalising assembly ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General attachments: * Jost landing gear at front * Side underrun protection * Folding A-plate at rear ----Electrics / Lighting: * 15-pin electrical plug * Multi-chamber tail lights ----Superstructure: Ppjdpfx Acsl Th Eyofst * Fixed steel front and side panels * Removable steel rear panel * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm at the front, incl. 2 drop-in skip stops at the front in 2 positions * Rear crossmember for fitting aluminium drive-on ramps, incl. 2 additional rear supports ----Loading edge: * Unladen loading height approx. 710 mm ----Load securing: * 4 repositionable skip stops (fit in 2 positions) for lateral centering of skips * Each side with 1 x (13.5 t) UVV lashing ring for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Painting: * Chassis, front panel, side panels, mudguards, drawbar, rear supports hot-dip galvanized * The axles, springs, landing gear, and air tanks painted in black ----General information: * Vehicle registered for one day 06/2024, not loaded/used due to missing tyre pressure monitoring system * Errors and prior sale reserved ----Delivery time: * Available immediately from Egestorf, A7

Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4: ----Brzdy: * Wabco ABS brzdový systém * Nouzové odjištění pružinových válců * Bubnové brzdy ----Nápravy: * 2 x 7 t nápravy Gigant ----Pérování: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažná oj / Tažné oko: * Výškově nastavitelná tažná oj (+/- 150 mm) * 40 mm šroubovací tažné oko ----Obecné přídavné díly: * Přední opěrná noha Jost * Boční ochrana proti podjetí * Sklopný zadní A-štít ----Elektroinstalace / Osvětlení: * 15-pólová zásuvka * Vícekomorová zadní světla ----Nadstavba: Ppsdpfxel Th Dmo Acfet * Pevné ocelové čelní a boční stěny * Odnímatelná ocelová zadní stěna * Podlaha z jehličnatého dřeva, tl. 50 mm * 1 kluzná plechová vložka 750 x 1 000 mm v přední části včetně dvou zasouvacích držáků korby vpředu (2 polohy) * Zadní příčník pro uložení hliníkových najížděcích ramp včetně dvou přídavných opěr vzadu ----Nakládací hrana: * Výška nezatížené nakládací hrany cca 710 mm ----Zajištění nákladu: * 4 přestavitelné zásuvné dorazy v 2 polohách pro boční centrování korby * Bočně vždy 1x (13,5 t) UVV uchycení pro zavěšení napínacích prvků * 2 ráčnové napínače (seřizování vřetenem) s kompenzačním řetězem a rychlozkracovačem (napínací síla 6 300 kg) ----Pneumatiky: * Pneumatiky: 285/70R19.5 ----Rozvor: * Rozvor: 1 140 mm ----Lakování: * Podvozek, čelní stěna, boční stěny, blatníky, tažná oj a zadní opěry žárově zinkované * Nápravy, pružiny, opěrná noha a vzdušníky lakované v černé barvě ----Obecné informace: * Vozidlo má denní registraci 06/2024, kvůli chybějícímu systému monitorování tlaku v pneumatikách nebylo zatěžováno ani používáno * Změny, chyby a mezitímní prodej vyhrazeny ----Dostupnost: * K dispozici ihned z Egestorfu u dálnice A7

Stav: použitý, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2021, ďalšia kontrola (TÜV): 08/2026, dĺžka ložného priestoru: 4 800 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, Výbava: ABS, Müller-Mitteltal nízkozdvižný sklápací príves - Nízkozdvižný príves a dvojstranný sklápací príves v jednom vozidle - Ťažné oko 40 mm - Pneumatická brzdová sústava - Podperné nohy na nakladanie a vykladanie - Nápravy Gigant - Obojstranné pneumatiky: 235/75 R 17,5 - Bubnové brzdy - Pohotovostná hmotnosť: 3.620 kg - Výškovo nastaviteľné oje - Technická kontrola TÜV do: 08.2026 - Kontrola SP do: 02.2026 Ppsdpfx Aeyk Rfkjcfot - Kontrola SP do: - Dĺžka ložnej plochy: 4.800 mm - Šírka ložnej plochy: 2.430 mm - Výška bočnice: 0,5 m Chyby a medzipredaj vyhradené. Interné číslo vozidla: 11349.

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 11.9: ----Braking system: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Flange eye: * Drawbar height-adjustable by approx. 300 mm * 40 mm flange drawbar eye ----General equipment: * Jost mechanical landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, outside on front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED rear lights ----Loading platform: * 50 mm softwood flooring * 20" container locks mounted front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear-access storage compartment under the loading platform integrated into the chassis ----Paintwork: * Chassis, drawbar, front wall and rear wall hot-dip galvanized * Drop side colour RAL 9010 pure white * Painting of side walls in a RAL colour of your choice available at extra charge ----Information: Pjdpfsl Thy Rex Acfjpt * New vehicle, unregistered * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) Pedpol Tilxefx Acfopt * Emergency release system for spring actuators * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Equipment: * Jost mechanical landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox front right, mounted on the front bulkhead exterior ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood flooring * 20" container locks mounted front and rear * Bolt-on bulkhead made of smooth sheet * Drop sides made of trapezoidal-profiled steel sheet with drop side spring assist * Bolt-on, hot-dip galvanized rear posts ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optionally, 3 t folding lashing brackets can be installed every 600 mm (5 lashing rings fitted on each side) * In the front and rear corners, one 6.3 t lashing ring fitted in each * Various apertures for securing options up to 1.2 t in the front and rear cross members ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under platform, integrated into the chassis ----Painting: * Hot-dip galvanized chassis as well as drawbar, front and rear bulkheads * Board colour in RAL 9010 pure white * Side wall painting in an RAL colour tone available at extra charge ----Info: * New vehicle, not registered * Subject to prior sale and errors excepted ----Delivery time: * Available immediately ex works Egestorf

Stav: nový, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 2 140 kg, maximálna hmotnosť nákladu: 12 260 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, zavesenie: oceľ, veľkosť pneumatiky: 285/ 70 R 19,5, rázvor náprav: 1 140 mm, brzda prívesu: príves s brzdou, Rok výroby: 2026, - TM-TA 14.4: - incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, both sides with lugs and quick-shorteners in Y-special version, 6.3 t - Clamping force with load-securing certificate - Wabco EBS - TPMS (Tire Pressure Monitoring System) - Emergency release device for spring-loaded brake cylinders - Drum brakes - 2 x 7 t Gigant axles Ppsdpexuhy Ejfx Acfst - Parabolic springs with compensating unit - Jost landing gear front - 2 x external drop-down supports at the rear - Height-adjustable, +/- 150 mm, hot-dip galvanized drawbar - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights - Closed single plastic mudguards - Foldable A-panel at the rear - Plastic collision protection buffer on underride guard - Hot-dip galvanized underride guard with integrated chain storage box B= 370 mm x D= 420 mm x H= 480 mm at the front left & right - 2 repositionable skip stops for lateral centering of containers - Front skip stops can be inserted into four positions with a pivoting stop - Each side fitted with 2 x 5.3 t UVV lashing rings for attaching tie-down elements - Axles, springs, air tanks, and landing gear painted in black tone - Subject to errors and prior sale - New vehicle with manufacturer’s warranty - Available from calendar week 05 / 2026

Stav: takmer ako nový (použitý), maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 12 080 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, zavesenie: parabolický list (pružina), veľkosť pneumatiky: 285/70R19.5, rázvor náprav: 1 140 mm, brzda prívesu: príves s brzdou, Rok výroby: 2022, - ETM-TA 14.4: - Wabco ABS braking system Ppjdpfx Aexvbcpjcfot - Emergency release system for spring brake cylinders - Drum brakes, 2 x 7 t Gigant axles - Parabolic suspension with tandem equalizing unit - Height-adjustable drawbar (+/- 150 mm) with 40 mm screw-in towing eye - Jost landing gear at the front, lateral underrun protection - Foldable A-board at the rear - 15-pin electrical connector, multi-chamber tail lights - Fixed steel front and side walls - Removable steel rear wall - Floor made of 50 mm softwood - 1 sliding plate 750 x 1,000 mm in the front area, incl. 2 removable skip stops, insertable in 2 positions at the front - 4 repositionable skip stops, insertable in 2 positions for lateral centring of skips - On each side, 1 x (13.5 t) UVV lashing point for attaching tensioning elements - 2 ratchet tensioners (spindle adjustment) with equalising chain and quick shortener (tension force 6,300 kg) - Rear cross member to accommodate aluminium loading ramps, incl. 2 additional drop-down supports at the rear - Unladen loading edge height approx. 710 mm - Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized - Axles, springs, landing gear, air tanks painted in a shade of black - Tyres: 285/70R19.5 - Wheelbase: 1,140 mm - Unladen loading edge height: approx. 710 mm - Colour: hot-dip galvanized - The vehicle received a day registration in 06/2024 due to the lack of a tire pressure monitoring system and has not been loaded/used - New vehicle with manufacturer's warranty - Subject to errors and prior sale - Available immediately from Egestorf on the A7

Stav: nový, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 2 140 kg, maximálna hmotnosť nákladu: 12 260 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 285/ 70 R 19,5, rázvor náprav: 1 140 mm, Rok výroby: 2026, - TM-TA 14.4: - Wabco EBS (elektronisches Bremssystem) - RDÜ Reifenkontrollsystem (Reifendrucküberwachungssystem) - Notlöseeinrichtung für Federspeicherzylinder (Notlösemechanismus für die Federspeicherzylinder) - Trommelbremsen - 2 x 7 t Gigant-Achsen - Parabelfedern mit Ausgleichsaggregat - Jost-Stützwinde vorne, 2 außenliegende Fallstützen hinten - Höhenverstellbares, feuerverzinktes Zugrohr (+/- 150 mm) - Feuerverzinktes Fahrgestell - 15-poliger Stromstecker - LED-Schlussleuchten - Geschlossene Einzelkotflügel aus Kunststoff - Klappbares A-Schild hinten - Kunststoff-Rammschutzpuffer am Unterfahrschutz - Feuerverzinkter Anfahrschutz mit integriertem Kettenablagekasten (B=370 mm x T=420 mm x H=480 mm) vorne links und rechts - Zwei steckbare Muldenanschläge zur seitlichen Zentrierung der Mulden - Vordere Muldenanschläge mit pendelbarem Anschlag, in 4 Positionen steckbar - Seitlich jeweils 2 Zurringe (UVV geprüft) à 5,3 t zum Einhängen von Spannelementen - Achsen, Federn, Luftkessel und Stützwinde in Schwarz lackiert - Änderungen, Irrtümer und Zwischenverkauf vorbehalten - Neufahrzeug mit Herstellergarantie Ppedpfx Acjxu Hplefst - Lieferbar ab KW 05/2026

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: Ppjdpfx Acjl Thyxjfot * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: Pjdpfxexf Skpe Acfept * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: Pjdpjxf Skvjfx Acfspt * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring Podpjl Thymjfx Acfopt * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: použitý, maximálna hmotnosť nákladu: 6 000 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 04/2026, Výbava: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Inquiry number: 11652 * TPMS Tire Pressure Monitoring System * EBS brake system, drum brakes, BPW axle, parabolic springs * Front landing gear, spring-assisted square tube supports at the rear with baseplate; safety locking pins for adjustable support heights * Drawbar with 40 mm towing eye (height adjustable) * 15-pin power connector * LED lighting * 315/80 R 22.5 tires, fully enclosed steel fenders * Swiveling cable drum mounting * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * For drums with 800-3,000 mm diameter x 1,700 mm width between drum arms * Equipped with tension lock for drum securing at the ends of the support arms and locking of the cable drum mount to the chassis with a centrally positioned claw lock * Motor-hydraulically operated pull and push cylinders with pipe break protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed controller and brake for drum drive. * Also includes hydraulic pump unit with Hatz 1B30 Silent diesel engine and manual starter, 6.5 HP (150 bar), pressure supply optionally via truck hydraulics or pump unit by switching connections * Toolbox approx. 500 x 350 x 400 mm * Chassis with hot-dip galvanized drawbar * Advertising space integrated in side protection, external polyester coating in RAL white * ----as-new condition (used for only 1 project) * ---- * Financing possible through our partners with or without down payment, residual value options, and various terms. Contact us for an offer! * We are official Müller Mitteltal dealer! Ppodpfsy R Hx Uex Acfjt * Example hire purchase through our partner FM LeasingPartner from just €595,- net/month over 60 months (no down payment, zero final payment). * Contact us for a quote! ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of business hours, appointments can be arranged * Wir sprechen deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais ----

Stav: použitý, maximálna hmotnosť nákladu: 6 000 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 05/2026, Výbava: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Reference number for inquiries: 11652 Ppsdpfxoy Rb Tyo Acfst * TPMS Tire Pressure Monitoring System * EBS braking system, drum brakes, BPW axle, parabolic leaf springs * Front support winch, rear spring-assisted square tube supports with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, enclosed fenders made of steel sheet * Swiveling cable drum mount * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, graduated * For drum diameter 800–3,000 x (1,700 mm width between drum arms) * With locking system for drum securing at the carrier arm ends, as well as central claw lock securing the cable drum mount to the chassis * Motor-hydraulic pull and push cylinders with pipe rupture safety. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system plugs, hoses, and pipes in NW 13. * Drum drive motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive. * Including power pack with hydraulic Hatz 1B30 silent diesel engine and hand starter, 6.5 HP (150 bar), power supply selectable via switching the connection lines between truck hydraulics or the power unit * Toolbox approx. 500 x 350 x 400 mm * Chassis with galvanized drawbar * Advertising surface integrated within the side guard, exterior polyester-coated in RAL white * ---- as-new condition (used only for 1 project) * ---- * Financing available through our partners, with or without down payment or residual value, and various terms possible. Request a quote from us! * We are Müller Mitteltal authorized dealers! * Example leasing offer from our partner FM LeasingPartner from as little as EUR 515/month net on a 72-month term (no down payment, zero residual value). * Request a quote from us! ---- * Our opening hours * Monday to Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside these hours, appointments are available upon request * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle français

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable in mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed fenders made of sheet steel with splash guards * Closed side underrun protection usable as advertising surface * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swivelling cable drum superstructure, clear width between drum arms 1,700 mm – with tension lock for securing the drum at the support arm ends, as well as central claw locking mechanism for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers Ppedpfxju I Iqxe Acfst * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Manual Landing Gear (front) * Spring-assisted square tube supports at rear with base plate, securing pins for multiple support heights * Drawbar with 40 mm bolt-type towing eye (height-adjustable, mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubing with cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swivel-mounted cable drum frame, clear width between drum arms 1,700 mm, with tension lock for securing drum at arm ends and a centrally positioned claw lock to secure the cable drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 1 pair of stepped centering cones made of polyamide * Hydraulic power unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized Ppjdpfx Acsu I Iqljfst * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front landing gear * Spring-assisted square tube supports at the rear with base plate, safety locking pins for variable support heights * Drawbar with 40 mm screwed towing eye (height-adjustable ___ mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross-members * Closed steel mudguards with splash protection Ppedpfeu I Iqrjx Acfot * Closed lateral underrun protection usable as advertising space * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling cable drum mounting, usable width between drum arms: 1,700 mm; with tension lock to secure the drum ends on the supporting arms as well as a central claw lock to secure the cable drum mounting to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed controller and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped * Hydraulic power pack with Loncin gasoline engine, including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Curb weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Spring-assisted square tube supports at the rear with base plates, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection that can be used as an advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; with clamp lock for drum securing at the carrier arm ends and a central claw lock securing the cable drum superstructure to the chassis * Motor hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepped in stages * Hydraulic power pack with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Hot-dip galvanized finish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale Ppjdpfou I Iq Eex Acfst * Immediately available ex Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Rear square tube supports with spring assistance and base plates, safety locking pins for multiple support heights * Drawbar with 40 mm screw coupling eye (height adjustable) * 15-pin electrical connector * LED lighting Psdpfju I Iqfjx Acfopt * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and cross members * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivelling cable drum mount, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the ends of the support arms and a central claw lock for securing the drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise recessed polyamide centring cones * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tyres * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf * Sample images

Stav: použitý, pohotovostná hmotnosť: 3 680 kg, maximálna hmotnosť nákladu: 10 720 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 11/2021, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 385/55R19,5 156J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/55R19,5 156J, veľkosť zadnej pneumatiky: 385/55R19,5 156J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, AKO NOVÝ, široké pneumatiky, sklápačová plošina POZINKOVANÁ, 12 kotviacich ôk, bočnice 600 mm, príplatok za rampy 1.000 €, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na požiadanie! Podpfoy U H A Usx Acfspt

Stav: použitý, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2018, dĺžka ložného priestoru: 5 060 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2018, MUELLER MITTELTAL Ppodey E Ecnjpfx Acfst Príves (SKLÁPAČ) 5,06 m Dovezené / BEZ HAVÁRIE VO VEĽMI DOBROM STAVE! ? ROK VÝROBY: 2018 VZDUCHOVÝ PODVOZOK ROZMER PNEUMATÍK: 385/55R19,5 ROZVOR KOLIES: 115 PLOŠINA: 506 x 242 x 50 m CELKOVÁ HMOTNOSŤ: 13 500 kg NOSNOSŤ: 6 350 kg TEL: KUBA – POĽSKY, ANGLICKY, NEMECKY, TALIANSKY SEBASTIAN – POĽSKY, NEMECKY, TALIANSKY, ????? LASZLO – MAĎARSKY COSTEL – RUMUNSKY? (Vybavíme všetky formality na export vrátane čísla) RADEK – ?????

Stav: použitý, pohotovostná hmotnosť: 3 290 kg, maximálna hmotnosť nákladu: 8 610 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2019, ďalšia kontrola (TÜV): 05/2027, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: strieborný, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: v tranzite, 2 nápravy, tandem, listové pruženie, ABS (protiblokovací systém), viazacie oká, mechanické nájazdové rampy, podpery vpredu a vzadu, bočná hliníková ochrana, výškovo nastaviteľné ťažné oje. Nadstavba: tandemový nízkozdvižný príves s mechanickými nájazdovými rampami a drevenou podlahou, 2 x Gigant nápravy, bubnové brzdy, rám a nájazdové rampy pozinkované! Momentálne znížená nosnosť na 10 000 kg (užitočné zaťaženie 7 610 kg). Údaje sú nezáväzné, vozidlo je na ceste! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi predaj a chyby vyhradené! Pedpsy Ui Itsfx Acfept

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, Rok výroby: 2026, RA-T 18.0: Loadable from front and rear ---- Brakes: * Wabco EBS-E (electronic brake system) * Emergency release mechanism for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross clamping units ---- Axles: * 2 x 10 t BPW wide-track axles ---- Suspension: * Air suspension (automatic lowering when the brake is uncoupled) ---- Electrics / Lighting: * Tire pressure monitoring with display in the truck via EBS signal (no truck-side installation required) Ppjdpfjl Tn U Rsx Acfst * 15-pin power plug * LED lighting system with protective roof * 2 LED reversing lights (actuated via reverse gear) ---- Drawbar: * Pneumatically lowerable drawbar, 1,800 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ---- General Attachments: * Plastic toolbox 858 x 500 x 500 mm, mounted right side * Storage box for container net made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side mounted * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection (RAL 9010 pure white) usable as advertising space * Rear underrun protection * Plastic rear impact buffers * Folding A-sign * Hazard placard with document pocket and rear reflective parking warning panel ---- Container Platform: * Additional front loading possible with rear track lowering and plug-in stop * Roller recesses in the turntable area with mechanically adjustable stop angles (2 positions) front left and right on the tracks * Track length approx. 6,830 mm * Pneumatic 4-point clamp lock * Suitable for transport of external roll-off containers according to DIN 30722 Part 1 - Dekra load securing certificate available ---- Loading Height: * Loaded approx. 1,130 mm ---- Painting: * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable and drawbar painted in black ---- Info: * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale * Sample pictures ---- Delivery Time: * Available approx. from calendar week 21/2026