Wiese Gabelstaplertransporter Mit Rampe kúpiť použité (11 069)

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with indication possible in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour tape on the sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable LED rotating beacon at rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed plastic single mudguards at front Ijdpfxsrczm Ds Aglsar * Straight steel mudguards at rear, each with spray protection (spray mist suppression) * Lateral underrun protection * Extended offset bend by 500 mm to the front * Bogie platform extension by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Deck over bogie platform with 50 mm softwood, and 60 mm softwood in low-bed platform * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included), each with 2 t lashing possibility * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform, 1 pair of 13.4 t lashing rings front/rear on the side outer frame, and 4 pairs of 10 t lashing rings per side, swiveling, lowerable, loadable in all directions and recessed into outer frame; 2 pairs of 6.4 t rings per side in excavator stick tray; 8 pairs of galvanized folding extensions for 3 m overall width (not at rear slope) * Widening planks stored laterally left in a storage compartment * Excavator stick tray above rear axle up to end of approach slope approx. 2300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (incl. 860 mm approach slope) * Chassis, bogie, loading ramps, and mechanical rear drop supports hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 21 / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin as well as additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel holder as basket version, mounted right side * Closed single plastic mudguard at front * Straight rear steel mudguards each with spray protection (anti-spray mist) * Side underrun protection * Extended offset by 500 mm forward * Front extension of the turntable platform by 520 mm with 45° corners, 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Floor over turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo * Each side with 4 stake pockets (no stakes included), each with 2 t lashing point * Cargo securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and each side 4 pairs of 10 t lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings in the excavator arm support, 8 pairs of galvanized fold-out markers for 3 m total width (not in the rear slope) * Widening planks stored left side in a storage compartment * Excavator arm support above the rear axle to the end of the access slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp axle * Load area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm access slope) * Chassis, turntable, loading ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted black * New vehicle with manufacturer's warranty * Errors and prior sale reserved Iajdpfsl Th Evox Agljr * Available from week 21 / 2026

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves * Prvá evidencia: 11/2004 * 3 nápravy * Vzduchové odpruženie * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg * Technicky prípustná celková hmotnosť: 47 000 kg Iajdpfx Agjw Tgkbolsr * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 11.9: ----Braking system: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Flange eye: * Drawbar height-adjustable by approx. 300 mm * 40 mm flange drawbar eye ----General equipment: * Jost mechanical landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, outside on front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED rear lights ----Loading platform: * 50 mm softwood flooring * 20" container locks mounted front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear-access storage compartment under the loading platform integrated into the chassis Ijdpel Thy Refx Agljar ----Paintwork: * Chassis, drawbar, front wall and rear wall hot-dip galvanized * Drop side colour RAL 9010 pure white * Painting of side walls in a RAL colour of your choice available at extra charge ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release system for spring actuators * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Equipment: * Jost mechanical landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox front right, mounted on the front bulkhead exterior ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood flooring * 20" container locks mounted front and rear * Bolt-on bulkhead made of smooth sheet * Drop sides made of trapezoidal-profiled steel sheet with drop side spring assist * Bolt-on, hot-dip galvanized rear posts Iasdpfx Agjl Tilxolor ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optionally, 3 t folding lashing brackets can be installed every 600 mm (5 lashing rings fitted on each side) * In the front and rear corners, one 6.3 t lashing ring fitted in each * Various apertures for securing options up to 1.2 t in the front and rear cross members ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under platform, integrated into the chassis ----Painting: * Hot-dip galvanized chassis as well as drawbar, front and rear bulkheads * Board colour in RAL 9010 pure white * Side wall painting in an RAL colour tone available at extra charge ----Info: * New vehicle, not registered * Subject to prior sale and errors excepted ----Delivery time: * Available immediately ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black Iedpjl Thyxefx Aglear ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: Isdpfx Aol Thymjglear * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 8 500 kg, celková hmotnosť: 11 990 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Výbava: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes, 2 x 7 t. Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin power connector * Multi-chamber tail lamps * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet – three-way tipper body * Continuous white-painted side walls with upper internal tubular reinforcement, drop-down, without central posts, with side wall spring lifter * Drop-down tailgate, optionally swinging, with manual central locking * Hot-dip galvanized, bolted rear stanchions * Each corner fitted with 1 x 5 t lashing ring; each side with 4 x 3 t lashing eyes recessed into outer frame Iaedpfsq Hg D Hox Aglor * 4 mm fine-grain steel floor plate * Net hooks * Rear mounting rail for drive-on ramps * Removable steel extensions, 500 mm high, three-way swinging * Body reinforced, with load securing certificate according to EN 12642 XL * 1 pair of aluminium drive-on ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment, recessed below the loading platform in the chassis * Axles, springs, air tanks, and landing gear painted in black * Tyres 285/70 R 19.5 * Side wall body colour RAL 9010 pure white * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf at the A7

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem balance unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm displacement via headplate) with elevated gantry for connection lines * 12 V 7 + 4-pin electrical wiring * 12 / 24 V LED lighting system with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing side * Side marker lights with indicator operation * Plastic quarter mudguards Iaoder Dpzuepfx Agljr * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Chassis made of fine-grain steel * Steel platform - 3-way tipper body with M-Strong side panels (fixed front wall, continuous side walls - without central posts - pendulum-mounted via manual central locking and mechanically foldable with side panel spring lifter * Hydraulic tailgate, 500 mm high, as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t lashing rings in each corner, as well as 4 x 3 t on each side, recessed and foldable * Hot-dip galvanized two-step access in front of the front wall (driver's side left) * 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacle shafts for aluminum loading ramps, recessed into the rear of the chassis, load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Superstructure painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, front support winch * K80 coupling painted in black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering system * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in truck via EBS signal – no installation required on truck side * 15-pin power connector * LED lighting * Support winch at front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted externally, front right on bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Fixtures in front of bulkhead and at rear for retrofitting 20" container locks Iajdpfx Ael Th Dfogler * Bolt-on smooth sheet steel bulkhead * Side panels made of trapezoidal-profile steel sheet, drop-down, split 1x in the middle * Sliding steel rear wall storable inside on the bulkhead when not in use * Bolt-on rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing brackets every 600 mm – 4 lashing rings installed on each side * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear end members for 1.2 t lashing options * One-piece mech. mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flanged towing eye, and support winch painted in black tone * Side panel paint color freely selectable up to approx. two weeks before production date (no metallic or special colors) * --Reinforced and certified body according to EN 12642 XL incl. load-securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1, Iodpfowh Hdxsx Agljar

Stav: nový, maximálna hmotnosť nákladu: 8 450 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 22 420 mm, výška ložného priestoru: 1 500 mm, Rok výroby: 2024, * KA-TA-R 11,9 Masterline: * incl. 1 m mesh side extensions * EBS braking system * Emergency release device for spring brake cylinders * TPMS (Tire Pressure Monitoring System) * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 rear mechanical hot-dip galvanized folding supports * Right-hand side galvanized steel toolbox * 15-pin electrical connector * Bolted underrun guard with LED tail lights * Plastic quarter mudguards * Mesh hooks on sides and rear in the central locking housing, plus 3 on the front wall * Hot-dip galvanized chassis * Fully galvanized steel 3-way tipper body * Continuous side walls without central stanchion, foldable, with spring-assisted drop sides * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized bolted rear stanchion * 1 x 5 t recessed and foldable lashing point at each corner, plus 4 x 3 t on each side * Lashing rings set into the outer frame, foldable * 4 mm steel floor plate * Rear ramp mounting track Ijdop Ncl Sepfx Aglsar * Body reinforced with load securing certificate per EN 12642 XL * 1 pair aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment beneath the load bed, integrated into the chassis * Tyres: 235/75 R 17.5 * Axles, springs, air tanks, drawbar and landing gear painted black * Side wall body colour hot-dip galvanized * 1 meter galvanized mesh side extensions * Sample images * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf, A7

Stav: nový, maximálna hmotnosť nákladu: 10 700 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 1 500 mm, Výbava: ABS, * KA-TA-R 14.4: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable hot-dip galvanized drawbar (approx. 300 mm) with 40 mm flange towing eye Isdop Ncmaopfx Agljar * Jost mechanical landing gear at the front * Rear: 2 mechanical hot-dip galvanized folding supports * 15-pin electrical connector * Multi-chamber rear lights * Hot-dip galvanized bolted underrun protection * Side toolbox made of galvanized sheet steel, right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous, fold-down white painted side walls with internal tube reinforcement, without central stanchions, with sideboard spring lifters * Tailgate can be folded down or used as a swinging gate via manual central locking * Rear pillars bolted and hot-dip galvanized * Each corner with one 5 t lashing point, plus four 3 t lashing rings recessed into each side frame * 4 mm fine-grained steel floor plate * Net hooks, rear mounting rail for loading ramps * Prepared for later installation of side wall extensions * Reinforced body with load securing certificate to EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed in chassis under the loading area * Axles, springs, air tanks, and landing gear painted in black shade * Side wall body color: RAL 9010 pure white * 1 meter galvanized mesh extension * Tires: 285/70 R 19.5 * Sample images * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf, near the A7

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with in-cab display via EBS signal – no installation required on truck side * 15-pin electrical connector * LED lighting * Front landing gear * Rear external folding support legs * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on bulkhead exterior * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Mounting provisions for retrofitting 20" container locks in front of bulkhead and at rear * Bolted bulkhead made from smooth sheet steel * Side walls made of trapezoidal-profiled sheet steel, drop-down, split centrally 1x * Steel rear wall, retractable between ramp holders, with storage bracket inside front of bulkhead when not in use Ijdol Thvxepfx Agloar * Bolted rear stanchions * Perforated outer frame, bent approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm (4 lashing rings fitted on each side) * One 6.3 t lashing ring in each front and rear corner * Several holes in front and end crossmember for 1.2 t lashing points * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm height) * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange tow eye, and landing gear painted in black * Side panel paint color freely selectable up to approx. 2 weeks before production date (no metallic or special colors) * -- Reinforced and certified body according to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available in Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS/EBS, with 40 km/h approval * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball head coupling ring (offset by +77 mm / 33 mm via the head plate), with elevated tower for the connection lines * 12 V, 7 + 4-pin power cable * LED lighting system 12/24 V with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle without on-vehicle installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Chassis made of high-tensile steel * Steel three-way tipper body with M-Strong sidewalls (fixed front wall, continuous side walls – without center stanchions – pendulum-mounted via manual central locking and mechanically foldable with sideboard spring lift * Hydraulic tailgate 500 mm high, serves as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * One recessed and foldable lashing ring (7 t) in each corner; 4 recessed and foldable side lashing rings (3 t each) * Hot-dip galvanized two-step access ladder in front of the front wall (on the left) * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum ramps, integrated from the rear in the chassis; load securing in accordance with EN 12642 XL Iajdpfsr Dpz Hsx Agljr * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Body paintwork in RAL 9010 pure white * Chassis, drawbar, rear supports, underrun protection hot-dip galvanized * Axles, air tanks, front support winch * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and interim sale subject to change * Immediately available ex Egestorf

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, najazdené kilometre: 15 020 km, výkon: 134 kW (182,19 k), prvá registrácia: 07/1993, typ paliva: nafta, pohotovostná hmotnosť: 7 520 kg, konfigurácia náprav: 4x4, rázvor náprav: 3 800 mm, ďalšia kontrola (TÜV): 07/2026, palivo: nafta, typ prevodu: mechanický, zavesenie: oceľ, Rok výroby: 1993, Špičkový stav S TÜV Dĺžka pre nadstavbu cca 3,60 m Iaodpfxoyzrp Hs Agljr 4x4 pohon všetkých kolies Listové pružiny Rakúske vozidlo Originál len 15 020 km Perfektné na prestavbu na obytné auto

Stav: nový, maximálna hmotnosť nákladu: 58 860 kg, celková hmotnosť: 73 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný vozový park s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webovej stránke. Výpis z výbavy. Kompletnú výbavu poskytneme na požiadanie. Labutí krk: * Labutí krk so skosenými rohmi vpredu cca 45° a so zadným zrezaním cca 750 mm x 10° * 3 páry viazacích ôk (LC 5 000 daN). Podlaha z tvrdého dreva, hrúbka cca 30 mm Nakladacia plocha v vysúvateľnom prevedení: * Nakladacia plocha v vysúvateľnom prevedení so zadným zrezaním cca 500 mm x 8° * 8 párov výklopných viazacích ôk na vonkajšej strane (LC 10 000 daN) * 1 pár ležatých viazacích ôk vpredu na nakladacej ploche (LC 10 000 daN) * Výrezy v vonkajšom ráme nakladacej plochy na uchytenie upínacích pásov (LC 2 000 daN) * Podlaha z tvrdého dreva, hrúbka cca 48 mm, nad nápravami podlaha z ryhového plechu Dvojdielne oceľové rampy: * Jeden pár pozinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 900 mm, s gumovým povrchom Super Grip * Rampa s hydraulickými sklápateľnými a vysúvateľnými dielmi * Hydraulický zdvih, hydraulicky posuvný * Maximálne zaťaženie na pár: 50 000 kg * V súlade s nariadením 1230/2012/EÚ rampy s dĺžkou menšou ako 300 mm nemusia byť v jazdnej polohe započítané do dĺžky vozidla 16 500 mm Nápravy: * BPW nápravy a podvozok, 1. náprava riadená dopredu, 2. a 3. náprava pevná, 4. a 5. náprava riadená dozadu, vzduchové pruženie so zdvíhacími/spúšťacími funkciami, bubnové brzdy * Riadené zadné nápravy s elektromagnetickou blokáciou cúvania – aktivácia cez spätný chod alebo manuálne Isdpsy Augwofx Aglsar * Technická nosnosť nápravy: každá 12 000 kg Pneumatiky: * Pneumatiky 235/75 R 17.5 3PMSF – značka podľa nášho výberu TPMS: * Systém monitoringu tlaku v pneumatikách TPMS podľa ECE R 141. Prenos údajov do ťažného vozidla cez štandardizované rozhranie EBS podľa ISO 11992. Pre správne zobrazenie musí byť ťažné vozidlo schopné prijímať a zobrazovať tieto údaje Podpery návesu: * Mechanical JOST podpery s 2-rýchlostnou prevodovkou, zdvihová nosnosť cca 24 t (skúšobná nosnosť cca 50 t) Brzdový systém: * Wabco brzdový systém podľa predpisov EÚ s EBS-E (4S3M), bez prepojovacích vedení k ťahaču Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele * Oceľové kvality: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Elektroinštalácia: * Elektroinštalácia podľa predpisov EÚ, osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * Všetky LED bočné obrysové svetlá blikanie s ukazovateľom smeru * ASPÖCK-UNIBOX na prednej prípojnej lište so zásuvkami 24N, 24S a 15 pólov. Pripojenie podľa ISO: 24N ISO-1185, 24S ISO-3731, 15 pinov ISO-12098 Lakovanie: * Kompletná oceľová konštrukcia po zváraní automaticky otryskaná tryskacím zariadením * Druhé otryskávanie s korundom pre optimálnu priľnavosť náterového systému * Metalizácia HRM celého podvozku ZINACOR 850 (85% zinok/15% hliník) na zabezpečenie najlepšej antikoróznej ochrany * Finálny vrchný lak 2 vrstvy dvojzložkového náteru, jednoliata farba RAL 3002 karminovo červená podľa RAL systému 841GL * Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Vrátane nasledovného príslušenstva: * 2” konštrukčný čap (king pin) * Pozinkovaná čelná stena z ocele, výška cca 400 mm * Držiak rezervného kolesa pred čelnou stenou * Na pozinkovanej prípojnej lište vpredu žlto-červené vzduchové spojky * Držiak pre výstražné majáky na zadnej časti prívesu * Pozinkované podpery pod sklonom nakladacej plochy * Gumový povrch Super Grip 2

Stav: nový, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 680 kg, maximálna hmotnosť nákladu: 2 200 kg, celková hmotnosť: 2 700 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 535 mm, šírka ložného priestoru: 2 150 mm, Rok výroby: 2026, Obsah dodávky: 1x autotransportér so silovým navijakom a nájazdovými rampami 453x215cm, 2700kg vrátane protišmykovej preglejky v strede Popis: Náš autotransportér kombinuje stabilitu a užívateľskú prívetivosť pre profesionálny prevoz vozidiel. Zvarená oceľová konštrukcia zaručuje vysokú odolnosť, zatiaľ čo automatické oporné koleso a množstvo upevňovacích bodov umožňujú bezpečné naloženie. Zabudovaný navijak uľahčuje nakladanie a oceľové nájazdové rampy (4535 mm x 2150 mm) zaručujú hladký prechod. Technické údaje: - Tandemová náprava - Zakladacie kliny - Navijak s brzdou Iaodpeyxrk Sofx Aglsr - Automatické oporné koleso - Extra dlhé oceľové nájazdové rampy Celková hmotnosť: 2700 kg Vlastná hmotnosť: 690 kg Užitočné zaťaženie: 2010 kg Dĺžka ložnej plochy: 4535 mm Šírka ložnej plochy: 2150 mm Celková šírka: 2150 mm Celková dĺžka: 5970 mm Celková výška: 970 mm Rozmery koľajníc: Dĺžka: 245 cm Šírka: 30 cm Výrobca: Martz Typ prívesu: autotransportér Typ oj: V-oj Podlaha: nájazdové koľajnice Materiál rámu: oceľ

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, najazdené kilometre: 420 000 km, výkon: 324 kW (440,52 k), prvá registrácia: 06/2015, typ paliva: nafta, ďalšia kontrola (TÜV): 01/2027, palivo: nafta, farba: modrá, kabína vodiča: spacia kabína, počet sedadiel: 2, Rok výroby: 2015, Výbava: kompresor, registrácia nákladného vozidla, TOP vozidlo s novo vykonanou technickou kontrolou (TÜV), plným ADR, novou prehliadkou, novými pneumatikami (viď fotografie). Vybavený kompresorom. Iedpfxsycvw Nj Aglear

Stav: nový, celková hmotnosť: 78 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 850 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck in SNT design for load area length optimization, approx. 3,700 mm long, tapered at the rear approx. 1,000 mm x 10° Iodpfjrvw U Ssx Aglsar • For tractor units: 4 x 2, 6 x 2, and 6 x 4 Load area: • Load area with extendable design, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load area and extending into the taper for excavator dipper stick accommodation, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards • Hardwood covering on the tapered rear of the load area • Ramp with hardwood covering • Square climbing strips, 20 x 30 mm, spaced approx. every 200 mm on the outer ramp frame Axles and tyres: • TWINAXLE-II independent wheel suspension with BPW axle stubs, 1st axle with steering control ahead of pivot, all other axles hydromechanically forced steering • 1st axle with electromagnetic reverse lock activated via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle levelling, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Yellow-red air couplings on the front connection bar • 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of lying lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Hardwood covering approx. 40 mm thick over the gooseneck, checker plate covering over the kingpin • 3.5" kingpin • Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide • Load area locking with conically welded locking profiles every 250 mm • Pre-tensioning plate included • 1 pair of lashing rings on the front cross member • 8 pairs of recessed lashing rings in the outer frame of the load area, foldable to the outside • Extensions (galvanized) extendable by approx. 230 mm each side • 1 pair of fixed wheel recesses, open up to extension, approx. 700 x 410 mm, in the load area in front of the 1st axle • Wheel recesses with sheet steel covering and square climbing strips 15 x 15 mm, spaced approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the load area between the 1st and 2nd axle • Wheel recesses with square climbing strips 15 x 15 mm and extensions in the lower section • ALU covers for wheel recesses between the 1st and 2nd axle, can also be used as extension planks • 1 pair of mechanical rear supports • Square climbing strips, 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the rear taper of the load area • Central lubrication system with 1 pump, brand BEKAMAX, with standard grease per NLGI-2 • Radio and wired remote control, with 2 indicator lights on the receiver as single track control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, Funkcionalita: plne funkčný, Rok výroby: 2026, Masívna kontajnerová rampa Naša robustná nakladacia rampa pre kontajnery Vám umožňuje rýchle a jednoduché nakladanie a vykladanie. Zároveň Vám naša nájazdová rampa zabezpečí bezpečný prístup k Vášmu kontajneru. Nakladanie paliet pomocou paletového vozíka je tak hračkou. Našu rampu (či už kontajnerovú rampu, nájazdovú rampu alebo nakladaciu rampu) však nie je možné používať len s paletovým vozíkom, ručným vozíkom, rudlou alebo fúrikom, ale aj s manipulačnou technikou (vysokozdvižným vozíkom). Naša rampa má výškovo nastaviteľný okraj, ktorý sa ideálne prispôsobí kontajneru. Rozmery: 2000 x 200 x 1800 mm (šírka x výška x dĺžka) Hmotnosť: 360 kg Isdeyr N Rnspfx Agloar Obsah dodávky: 1 x kontajnerová rampa Nosnosť: cca 7 t

Stav: nový, Naše 20-stopové barové kontajnery s strešnou terasou sú ideálnym riešením pre gastronómiu, podujatia alebo veľtrhy. Každý kontajner je vyrobený individuálne podľa požiadaviek zákazníka, takže vybavenie, dizajn a funkčnosť presne zodpovedajú vašim potrebám. Špeciálne vlastnosti ✅ Strešná terasa so zábradlím, výška parapetu približne 90 cm ✅ Výrez na schodisko, zavesiteľný pre pohodlný prístup ✅ Základná kontajnerová platforma s twistlock uzamykaním ✅ Oceľová podlaha – vysoká nosnosť a odolnosť voči poveternostným vplyvom Vybavenie ✅ Výdajné okno v strede, približne 4 metre široké, výklopné pomocou plynových vzpier s istením proti pádu ✅ Drevený pult v oceľovom ráme, výklopný alebo odnímateľný pod výdajným oknom ✅ Dvere v kontajnerovom dizajne pre osoby, približne 1 x 2 metre, natreté v antracitovej farbe Iaodpfxjyvz D Ne Agler ✅ Náter RAL 7016 antracit – moderný a nenáročný na údržbu Rozmery Vonkajšie rozmery: dĺžka 6 058 mm, šírka 2 438 mm, výška 2 591 mm Vnútorné rozmery: dĺžka 5 898 mm, šírka 2 350 mm, výška 2 390 mm Hmotnosť a objem Suchá hmotnosť: 2 200 kg Celková hmotnosť: 30 480 kg Objem: 33,2 m³ Výhody na prvý pohľad ✅ Vyrobené na mieru podľa vašich požiadaviek ✅ Ideálne na predaj, barovú prevádzku alebo podujatia ✅ Vysokokvalitné spracovanie, odolnosť voči poveternostným vplyvom a dlhá životnosť ✅ Strešná terasa ako atraktívny prvok pre hostí ✅ Flexibilné riešenie pre interiér aj exteriér 📩 Pošlite nám vaše plány alebo požiadavky a pripravíme vám individuálnu ponuku na váš 20-stopový barový kontajner so strešnou terasou. Vaš tím Globaltainer

Stav: nový, Ponúkame Vám naše úplne nové 20-stopové lodné kontajnery s oceľovou podlahou. Špecifikácia: ✔️ Odolná oceľová podlaha ✔️ Odolnosť voči kvapalinám ✔️ Ideálne na skladovanie chemikálií a podobných materiálov Isdpfsyv Am Ssx Aglear Vaše výhody na prvý pohľad: ✔️ Suché skladovanie – kontajnery sú vetru a vodeodolné ✔️ Bezpečné skladovanie – kontajner je uzamykateľný a robustný ✔️ Nový kontajner – len jedna plavba ✔️ Dlhá životnosť – vďaka cortenovej ocele vydržia lodné kontajnery viac ako 30 rokov ✔️ Za príplatok zabezpečíme aj dopravu! Na želanie vrátane vykládky. Vonkajšie / vnútorné rozmery: Dĺžka: 6 058 mm / 5 898 mm Šírka: 2 438 mm / 2 350 mm Výška: 2 591 mm / 2 390 mm Neváhajte nás kontaktovať so svojou požiadavkou! Tím Globaltainer

Stav: nový, Rok výroby: 2026, Funkcionalita: plne funkčný, Naše 20-stopové barové kontajnery s terasou na streche sú ideálnym riešením pre gastronomické prevádzky, eventy alebo veľtrhy. Každý kontajner vyrábame individuálne podľa požiadaviek zákazníka, takže výbava, dizajn a funkčnosť presne zodpovedajú vašim potrebám. Špeciálne vlastnosti ✅ Strešná terasa so zábradlím, výška parapetu cca 90 cm ✅ Pripravený otvor na schodisko, zavesiteľný pre pohodlný prístup ✅ Základná kontajnerová platforma s twistlock uzamykaním ✅ Oceľová podlaha – vysoká nosnosť a odolnosť voči poveternostným vplyvom Výbava ✅ Predajné okno v strede, cca 4 metre široké, výklopné pomocou plynových vzpier s bezpečnostným zaistením ✅ Drevený pult v oceľovom ráme, výklopný alebo odnímateľný pod predajným oknom ✅ Dvere v kontajnerovom štýle, cca 1 x 2 metre, nalakované v antracitovej farbe ✅ Lakovanie RAL 7016 Antracit – moderné a nenáročné na údržbu Rozmery Vonkajšie: dĺžka 6 058 mm, šírka 2 438 mm, výška 2 591 mm Vnútorné: dĺžka 5 898 mm, šírka 2 350 mm, výška 2 390 mm Hmotnosť a objem Hmotnosť prázdneho kontajnera: 2 200 kg Celková hmotnosť: 30 480 kg Ijdpfeyr Ra Dex Agljar Objem: 33,2 m³ Výhody na prvý pohľad ✅ Vyrobené na mieru podľa vašich požiadaviek ✅ Ideálne na predaj, barovú prevádzku alebo eventy ✅ Kvalitné spracovanie, odolné voči poveternostným podmienkam, dlhá životnosť ✅ Strešná terasa ako atraktívny prvok pre hostí ✅ Flexibilné usporiadanie interiéru aj exteriéru 📩 Pošlite nám vaše plány alebo predstavy a pripravíme vám individuálnu ponuku na 20-stopový barový kontajner s terasou na streche. Váš tím Globaltainer

Stav: nový, Funkcionalita: plne funkčný, dĺžka kontajnera: 20 stopa, Ponúkame náš 20-stopový kontajner s strešnou terasou. Kontajner je vyrábaný na zákazku podľa požiadaviek zákazníka. Iedowkt R Depfx Agloar 20-stopový námorný kontajner, nový, vo farbe RAL 7016 antracit + Predajné okno so stredovým umiestnením, cca 4 metre široké, výklopné pomocou plynových vzpier, so zabezpečením voči padaniu Drevený pult vsadený v oceľovom ráme Predajný pult Výklopný/odnímateľný pod predajným oknom Strešná terasa Strešná terasa so zábradlím a výrezom na schodisko + Základná kontajnerová platforma s uzamykaním typu twistlock + Oceľová podlaha s vysokou nosnosťou, odolná voči poveternostným vplyvom + Lak v odtieni RAL 7016 + Zábradlie so zábradlovou výškou cca 90 cm + Výrez pre zavesenie schodiska Dvere pre vstup osôb v dizajne kontajnera Lakované v antracite Približne 1 x 2 metre Preprava po celom Nemecku / na želanie aj s vykládkou na mieste. Tešíme sa na vašu požiadavku! Tím Globaltainer