Müller-Mitteltal 11,9 To. Tandemtiefl. / Einschubrampen Verzinkt kúpiť použité (20 354)

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system Dkedpfxsl Thxde Am Sol * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Lateral underrun protection * Swing-type support legs at rear on chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle with enclosed plastic mudguards, rear axle with straight, hot-dip galvanized steel fenders, each with splash guards * Side and rear contour marking tape, reflective * Hinged cover (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED taillights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each also with lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swivel-mounted and lowerable, loadable in all directions and recessed in outer frame – 13.4 t capacity at corners, otherwise 10 t. * 6 pairs of mechanical swing-out outriggers for total width of 3 meters (not at rear slope) * Widening planks stored in center of loading area * Excavator boom support over rear axle up to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the support) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-section valve block for future retrofitting of hydraulic ramp adjustment * Mechanical lateral ramp adjustment * Loading area above kingpin: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permitted gross weight up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors Dsdpfx Ajylfvmom Sokl * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm Dsdpfsl Th Dfox Am Sekl * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on truck side) * 15-pin electrical connector * LED lighting * Front landing gear * Rear foldable support legs (external) * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Front and rear pre-fittings for retrofitting 20" container locks * Bolted flat sheet metal bulkhead * Drop-down side walls made of trapezoidal profiled steel, split 1x in the middle * Slide-in steel rear wall between the ramps, storage holder inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - 4 lashing rings mounted on each side - * In each front and rear corner 1x 6.3 t lashing ring * Profifix lashing rail, centrally along longitudinal axis, with lashing capacity up to LC 3,000 daN * Various drilling options for 1.2 t lashing capability in the front and rear cross members * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side walls painted in a desired RAL color (no special or metallic paints); color can be changed up to approx. 6 weeks before completion * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope Dkjdsl Tnvgspfx Am Sol ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) Dksdpfx Aox Ipbgom Ssl * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tyre pressure monitoring with in-cab display via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting * Front support winch Dedpfsl Thvxex Am Sekl * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provision in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, drop-down design, split centrally once * Steel rear wall, can be slid in between the ramps, with bracket for unused storage inside at the front bulkhead * Screw-fastened rear stanchions * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm (with 4 lashing rings mounted per side) * 1 x 6.3 t lashing ring at each front and rear corner * Profifix lashing rail along vehicle longitudinal axis, centre-mounted for securing loads up to LC 3000 daN * Multiple holes in front and rear cross-members for securing loads up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (retractable to 20 mm height) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye and support winch painted in a black tone * Side wall painting available in RAL colour of choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from approx. CW 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Rear swivel supports on the chassis frame * Mechanically adjustable warning sign assemblies front and rear * Closed plastic mudguards at the front axle and straight galvanized steel skirts at the rear axle, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with integrated lashing options * Load securing package consisting of: 2 lashing rings (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant swivelable and lowerable lashing rings—loadable in all directions and recessed in the outer frame—13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not at the rear chamfer) * Widening planks stored centrally on the loading area * Excavator arm rest above the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the excavator arm rest) * Single-piece hydraulic access ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp adjustment * Platform above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm Dedpfx Aex Ipb Hom Sekl * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm access slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * Empty weight: 5,900 kg * --technically permissible gross weight: 30,000 kg-- * Vehicle is galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. CW 36/2026 *

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Braking system: Dedoylfvgspfx Am Sjkl * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with raise/lower facility and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal (no truck-side installation required) * SmartBoard as info tool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED rotating beacon (removable), rear ----General attachments: * Warning sign packages front & rear * 2 x tool boxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, mounted on the right side * Closed individual plastic mudguards at the front * Straight steel rear mud flaps, each with spray protection (spray suppression) * Side underrun protection ----Lowbed platform: * Swivel platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. lids, lockable * Flooring made of 50 mm softwood on the swivel platform and 60 mm softwood on the lowbed platform * 20 mm rubber flooring instead of wood in the driving lane area with a lowbed length of 6,780 mm including the drive-on slope * Rubber covering on the drive-on slope, left and right, approx. 860 mm long * 4 stake pockets per side (stakes not included), with 2 t lashing capacity each ----Chassis: * Chassis made of high-strength fine-grained steel ----Load securing (Lasi package): Swivel platform: * 2 pairs of 13.4 t lashing eyes on the outer frame of the swivel platform Lowbed: * 4 pairs per side of 10 t foldable lashing rings on the outer frame, loadable in all directions * 2 pairs per side, rear, of 13.4 t pivoting lashing rings ----Ramps: * Rubber covering on the foldable drive-up ramps * Hydraulic foldable ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3-meter total width (not in the rear slope area) * Widening planks stored in a side compartment on the left ----Excavator arm recess: * Excavator arm recess above the rear axle up to the end of the drive-on slope, approx. L=2,100 mm x W=740 mm x D=190 mm * 2 pairs of 6.4 t lashing rings on the sides in the excavator arm recess ----Hydraulics: * Hydraulic flow divider in the trailer (when hydraulic pump output in the truck is over 40 - max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm drive-on slope) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Contour tape on sides and rear, reflective * Chassis, swivel platform, drive-up ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may include special equipment ----Delivery time: * Vehicle available approx. from KW 23/2026

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18,0: * 2-in-1: Suitable for roll-off containers and as a low loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm draw eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Folding A-sign at the rear ----Loading Platform: * Main frame with raised outer frame for guiding roll containers * Steel sheet floor with wheel recesses in the bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-point locking and mechanical plug-in stop angles at the front of the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the inclined ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front of the bulkhead support * 3 pairs of 10 t UVV lashing rings laterally in the outer frame * Each side: 4 x 2 t lashing eyes in cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Paintwork: * Chassis, bogie, locking parts and rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black tone ----Information: * New vehicle without initial registration, full manufacturer’s warranty * Subject to errors and prior sale Dkedpfxel Tq Nms Am Sel * Example images ----Delivery Time: * Available from approx. calendar week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector Dodpfx Amsy Ngzyo Sjkl * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-bed trailer ----Braking System: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: Djdpfx Amol Tpc Ao Sokl * Air suspension with lifting and lowering function, plus RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and adjustable height ----Electrics / Lighting: * Tire pressure monitoring with indicator in the truck via EBS signal (no truck-side installation required) * LED tail lights, 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear impact protection buffers * Rear foldable "A" sign ----Loading Area: * Main frame with raised outer rails for roll container guidance * Steel floor plate with roll grooves in bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point locking system plus mechanically insertable stop angles at the front track, load securing certificate to DIN 30722-1 * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10-ton UVV lashing rings at the front bulkhead carrier * 3 pairs of 10-ton UVV lashing rings on the side outer frames * 4 pairs of 2-ton cloverleaf lashing points per side * 4 x 8-ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable rear storage compartment) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in a shade of black ----Information: * New vehicle without prior registration, with full manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available approx. from week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): Dsdpfx Amsy Ngz He Sokl * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, * TRA-Kombi 18.0: * 3 in 1 = suitable for roll-off containers, skip containers, and as a low-loader ----Braking System: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm length * 40 mm drawbar eye and height adjustment device ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (tyre pressure monitoring), available display in truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact buffer * Mechanical drop supports at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel deck with recessed rollers in the bogie area * Roll-off container transport: container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanically insertable front stop angles in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 repositionable skip clamps for side-centering the skips, front 4 skip clamps are insertable and fitted with a pendulum stop * Weld seam as anti-slip coating in the ramp track area ----Load Securing: Dsdpsl Thv Refx Am Sjkl * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the skips * 4 lashing cleats per side in cloverleaf design * 1 pair of 13.4 t UVV lashing rings towards the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight of technically 20,000 kg * New vehicle with manufacturer's warranty * Errors and interim sale reserved ----Delivery Time: * Available from approx. week 44 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, * TRA-Kombi 18.0: * 3 in 1 = suitable for roll-off containers, skip containers, and as a low-loader ----Braking System: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector Dkjdpfx Amol Thwcj Ssl * TPMS (Tire Pressure Monitoring System), readout possible in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box, made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact buffers * Mechanical rear drop-down supports ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically pluggable stop angles at the front on the runway, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 removable skip stops for lateral centring, front 4 skip stops with oscillating stops * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing skip containers by positive and non-positive fastening of tensioning elements * 4 lashing profiles on each side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment, accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 44/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized Dsdpfx Amopk D I Ae Sskl * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection Djdpfx Asl Th Adom Sjkl * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension, raising and lowering, with RtR valve * Smart-Board as infotool * Side underrun protection * Swing-out supports at the rear on the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel mud flaps with spray protection * Reflective conspicuity tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical plug * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform; 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear taper) * Extension planks stored in the center of the load area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) Dkjdjl Tq Euspfx Am Sel * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-up slope) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tanks etc. painted in black * Tyres 235/75 R 17.5 * Payload approx. 24,000 kg with 30,000 kg gross weight * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 32/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 13 410 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, objem nakladacieho priestoru: 11 m³, Rok výroby: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck display via EBS signal – without truck-side installation * 2 x 9 t Gigant axles * Air suspension with level control during tipping operations * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear, front * Folding galvanized steel underrun protection for paver loading * Closed individual plastic mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector Djdpfx Asxl Nkgjm Sjkl * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel 3-way tipper body (side walls with MM profile – continuous without center stanchion – pendulum-mounted via manual central locking and left side drop-down with side wall spring assist) * Sliding tarpaulin similar to RAL 7038 agate grey with tensioning by lateral tensioning ratchets and tensioning cords at the front and rear * Front wall platform made of grating with access step at the drawbar and handrail on the front wall * Rear wall – made of HBW 400 steel – pendulum-mounted via automatic dual claw lock * 5 mm steel floor made of HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated into the steel floor * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * Side wall painting in any desired RAL color (except for special or metallic finishes), changeable up to approx. 6 weeks prior to completion * Axles, air tanks, landing gear, flange towing eye painted in a shade of black * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Stav: použitý, konfigurácia náprav: 2 nápravy, celková šírka: 25 000 mm, celková výška: 40 000 mm, Rok výroby: 2014, Výbava: ABS, Na otázky ohľadom vozidla Vám rád odpovie pán Seidel (telefonicky). MÜLLER MITTELTAL SF32BM/BT auto-nadstavba na betón Nadstavba: Liebherr HTM 1004 10m³, BPW nápravy, bubnové brzdy, pružinové zásobníky, Wabco ABS, 1. náprava zdvíhacia, vzduchové odpruženie, prípustná celková hmotnosť: 32.000 kg, pohotovostná hmotnosť: 6.510 kg, užitočné zaťaženie: 25.490 kg, dezén pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Na požiadanie Vám pripravíme ponuku na leasing alebo financovanie. Pán Seidel Vám ochotne poradí telefonicky. Ďalšie informácie nájdete na našej domovskej stránke. Djdpfeyfu Sdjx Am Sskl ... Chyby, zmeny a medzipredaj vyhradené!!! = Ďalšie informácie = Celková prípustná hmotnosť: 32.000 kg Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t, nápravy Gigant * Parabolické pružiny s vyrovnávacou jednotkou * Ťažné oko výškovo nastaviteľné cca 300 mm * Podpera BPW * Mechanické zadné podpery * Plastová náradová schránka vpredu vpravo na čelnej stene * Bočná ochrana proti nárazu * LED osvetlenie * Podlaha z ihličnatého dreva 50 mm * V rohoch pred čelnou stenou a koncovým nosníkom vždy 1 x 6,3 t upevňovací krúžok, bočne vždy 2 x 6,3 t UVV upevňovacie krúžky zapustené do vonkajšieho rámu * Jednodielne mechanické mrežové nájazdové rampy s pružinovým mechanizmom pre obsluhu jednou osobou cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a ťažné oko žiarovo pozinkované * Nápravy, pružiny, vzduchové zásobníky, predná podpera lakované v čiernom odtieni * Nové vozidlo s plnou zárukou výrobcu * Zmeny a medzipredaj vyhradené Dksdswyhzpjpfx Am Sol * Dodanie približne od 35. týždňa/2026

Stav: použitý, maximálna hmotnosť nákladu: 13 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2008, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 850 mm, objem nakladacieho priestoru: 10 m³, celková šírka: 2 550 mm, celková výška: 2 580 mm, Rok výroby: 2008, Výbava: ABS, Müller-Mitteltal Three-Way Tipper 2-Axle Tandem Trailer VIN: 051973 Chassis / Attachments: * Air suspension * 2 x BPW Eco Plus axles with drum brakes * Tyres: 385/65 R 22.5 * Remaining tread depth: Front approx. 20/80%, Rear approx. 30/80% * Fixed underride guard * Drawbar with 50 mm eye * 1 x Jost support leg on the drawbar Body: * Müller-Mitteltal three-way tipper body * 850 mm aluminium side walls * Front wall and tailgate 960 mm * Approx. 10 m³ * Pallet width Weights: * Gross weight: 18,000 kg * Payload: 13,900 kg * Unladen weight: 4,100 kg Miscellaneous: * German registration * SP 03 / 2027 * 1 previous owner New main inspections / safety inspections or weight reductions/increases are available on request. We are also happy to assist you in obtaining export/transfer license plates, and transporting your purchased vehicles within Germany is also possible. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for misprints & typographical errors, subject to alterations, interim sale and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the marketing of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterised by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to guide them through the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arrangement of special transports We are happy to assist you with the arrangement of special transports. Day registration/export plates We are happy to help you obtain export/temporary plates. Handling customs formalities We are happy to assist you with customs matters. Dsdpfx Ajy H Tryjm Sjkl

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 10/2013, celková šírka: 2 750 mm, Rok výroby: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-axle | Hydraulic lowdeck | 48 t permissible gross weight | 275 cm wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for transporting machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy build and reliability. Technical specifications: Brand: Müller Mitteltal Model: ITS-VLL 30.0 Profi Chassis number (VIN): WMM00000D0057250 Permissible gross weight: 48,000 kg Axle configuration: 3 axles Axle loads: Axle 1: 10,000 kg Axle 2: 10,000 kg Axle 3: 10,000 kg Permissible point load: 18,000 kg Load deck: Low deck (low loader specification) Loading ramps: hydraulically operated Low bed: hydraulically adjustable (up/down) Tyres: in good condition Construction: all-steel chassis Max speed: 80 km/h Features & Options: Heavy-duty low loader version Hydraulically height-adjustable low deck Hydraulic rear loading ramps Wide (275 cm) and stable loading platform Suitable for excavators, rollers, cranes, etc. Robust construction, ready for immediate use Condition: The trailer is pre-owned but fully functional and shows age and use-related wear marks. Technically a robust and reliable equipment transporter. Ready for immediate use – ideal for transport and construction companies. For further information or to arrange a viewing, please contact us. = Further Information = Axle configuration Rear axle 1: Twin wheels; Max axle load: 10,000 kg; Steered Rear axle 2: Twin wheels; Max axle load: 10,000 kg; Steered Rear axle 3: Twin wheels; Max axle load: 10,000 kg; Steered Weights Unladen weight: 14,500 kg Payload: 33,500 kg Gross vehicle weight: 48,000 kg Maintenance, history, and condition APK (MOT/Technical inspection): valid until 02.2027 Technical condition: very good Visual condition: very good Financial information Price: On request Dkjdey I Si Tepfx Am Ssl Further information Please contact Klaas Gerrits or Henk Gerrits for more information.

Stav: nový, maximálna hmotnosť nákladu: 6 900 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plates and safety locking pins for different support heights * Drawbar with 40 mm bolt-type towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel fenders with splash guards * Closed side underrun protection usable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with locking clamps to secure drum at the bearing arm ends and a central claw lock to secure the cable drum superstructure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter with centering and rotatable ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic supply and return lines Dsdpfxjxyniwe Am Sekl * Steel construction and hydraulics prepped for retrofitting an auxiliary engine * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stav: nový, zavesenie: iný, farba: iný, typ prevodu: iný, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Úložný box na hliníkové rampy, cena za jeden úložný box, dĺžka cca 2,48 m, šírka cca 1 m, výška cca 27 cm, -- chyby v písaní, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, Ďalšie informácie: ! Dkodpfx Amoyy Urnj Sjl

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Dkjdpfeyy I U Nex Am Sjl