Müller-Mitteltal T3 Ng Tieflader 3-Achser Bpw Doppelbereifung kúpiť použité (43 822)

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting Dkjdpetplwiofx Am Sjl * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) Dksdpoxptn Rofx Am Sol * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Immediately available – Reference number for inquiries: 11611 Delivery to your address possible. * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized 400mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized grating, anti-slip design, can be pushed together to approx. 20mm, secured with holding rods and diagonal support * Ramp assist – vertical, adjustable springs for easy single-person operation * 4 UVV-drop lashing rings (LC 6300daN) * Perforated side frame (45°-angled, hole pattern for lashing systems, lashing capacity per point LC 2000 daN at a minimum spacing of 480mm. Retrofitting with drop lashing rings LC 3000 daN at approx. 600mm intervals possible) with close-set transverse crossmembers, high-profile front and rear ends, rear drive-on slope, all hot-dip galvanized * 10 UVV lashing rings LC 3000 daN recessed into existing hole pattern in the side frame, additional * Further tie-down options via holes (Ø 50mm, LC 1200 daN) in the front and end crossmembers * Tool box in front of the bulkhead * Side marker lights with indicator control * 50mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40mm towing eye (hot-dip galvanized), height-adjustable, optionally available with 50mm eye Djdpeyndh Hjfx Am Sekl * 1 removable LED warning flasher at the rear---- * Leasing, hire purchase, financing, trade-in possible * e.g. €510 for 60 months, without down payment, no residual value * ---- * Our opening times * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside business hours we are available by appointment. We speak German, English, Polish, and French. Leasing, financing, and trade-in possible.

Stav: použitý, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2021, ďalšia kontrola (TÜV): 08/2026, dĺžka ložného priestoru: 4 800 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, Výbava: ABS, Müller-Mitteltal nízkozdvižný sklápací príves - Nízkozdvižný príves a dvojstranný sklápací príves v jednom vozidle - Ťažné oko 40 mm - Pneumatická brzdová sústava - Podperné nohy na nakladanie a vykladanie - Nápravy Gigant - Obojstranné pneumatiky: 235/75 R 17,5 - Bubnové brzdy - Pohotovostná hmotnosť: 3.620 kg - Výškovo nastaviteľné oje Dsdpoyk Rfksfx Am Sjkl - Technická kontrola TÜV do: 08.2026 - Kontrola SP do: 02.2026 - Kontrola SP do: - Dĺžka ložnej plochy: 4.800 mm - Šírka ložnej plochy: 2.430 mm - Výška bočnice: 0,5 m Chyby a medzipredaj vyhradené. Interné číslo vozidla: 11349.

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) Dkjdpjl Tlhrsfx Am Sjl * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: * Wabco ABS system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 tonne Gigant axles Dkodpfx Amsl Th Htj Sol * Parabolic suspension with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underride protection * Plastic quarter mudguards * Net hooks at each position of the central locking, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body, continuous side panels with internal tube reinforcements, drop sides without central stanchions, foldable with side wall spring lifts * Bolted rear stanchions * Combination steel wing doors at the rear, asymmetrically split 2-wing design, can pivot and lock at 270°, not foldable, with additional pendulum frame for automatic rear wall opening during tipping operation, locking via galvanized rotary rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open * Each corner fitted with one 5-ton lashing point, four 3-ton lashing rings recessed into the outer frame on each side * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced superstructure with load securing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 tons per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed into the chassis below the loading surface, accessible from the rear * Chassis, drawbar, underride guard, rear stanchion and folding supports at the rear hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tyres: 285/70 R19.5 * Side panels painted to RAL 9010 pure white * Painting of side walls in other RAL colours possible at extra cost * Vehicle has a day permit (unused) * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower function and RtR valve * Manometer pressure display for payload determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel skirts with spray protection Dsdpfx Asl Tnu Ajm Sskl * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Towing eye (50 mm) with height adjustment * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front structure in front of the bogie platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the bogie platform's steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope) * Plank holder for extensions under chassis, left longitudinal direction * Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support * Hardwood flooring on running surfaces of low-loader platform * Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * Outer planks of loading ramps made of hardwood * Steel construction prepared for 6-position control valve * Unladen loading edge approx. 950 mm +/- 20 mm (chassis) * Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, towing eye assembly painted black-- * Tyres: 235/75 R 17.5 * Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the front right-hand side of the chassis * 15-pin electrical plug * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter fenders * Lashing hooks located at the central locking bearings and 2 pieces at the front wall * Chassis made of fine-grain steel * Steel pallet three-way tipper body with continuous side walls, top edge reinforced with inner tubes, without center posts, side walls foldable with board wall spring lifting device * Rear posts bolted * Combination steel wing doors at rear; 2-leaf, asymmetrically split, can be swivelled and locked to 270°, cannot be folded – with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation function for automatic rear wall opening during rear tipping with open wing door * Each corner fitted with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm steel floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the load floor at the rear of the chassis * Chassis, drawbar, underrun protection, rear posts, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black * Tyres: 285/70 R19.5 * Sideboard painting in RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost * Vehicle has a one-day registration (not in use) * Subject to errors and prior sale Dkjdjl Th Duopfx Am Sjl * Immediately available from Egestorf

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený! Dsdjwmpbdopfx Am Sekl

Stav: použitý, pohotovostná hmotnosť: 4 500 kg, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2015, ďalšia kontrola (TÜV): 07/2025, dĺžka ložného priestoru: 4 800 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 1 000 mm, farba: modrá, Rok výroby: 2015, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * Nemecký príves * Stav podľa fotografií * Müller-Mitteltal trojstranný sklápací príves, typ KA-TA-R 18,0 Tandem * Rozmery sklápanej korby: 4 800 x 2 400 x 1 000 mm * Rolovacia plachta * Vzduchové odpruženie * Kotúčové brzdy * Podesta * Podpera Jost * Nosnosť 13 500 kg V prípade záujmu o novú technickú kontrolu (TÜV) Vám radi pripravíme ponuku od našich partnerských servisov. Naša ponuka je VŽDY BEZ novej technickej kontroly (TÜV), bez novej DGUV, bez novej SP a bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej webovej stránke. Hovoríme týmito jazykmi: nemecky, anglicky, poľsky, turecky. Dkodpfx Aewz H Nbom Ssl Upozornenie: Dôrazne odporúčame a ponúkame možnosť obhliadky a kontroly tovaru, aby nevznikli nesprávne predstavy o stave a vhodnosti produktu. Obhliadky a kontroly sú možné kedykoľvek po dohode a sú výslovne žiadané. Všetky informácie sú bez záruky. Za chyby alebo omyly v ponuke nepreberáme zodpovednosť. Kupujúci je povinný sa osobne presvedčiť o stave a výbave tovaru / vozidiel. Zmeny, medzipredaj a omyly vyhradené.

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with indication possible in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour tape on the sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable LED rotating beacon at rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors Dodpfjrczm Dex Am Sjkl * LED lighting * Straight drawbar with 40 mm towing eye and infinitely variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed plastic single mudguards at front * Straight steel mudguards at rear, each with spray protection (spray mist suppression) * Lateral underrun protection * Extended offset bend by 500 mm to the front * Bogie platform extension by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Deck over bogie platform with 50 mm softwood, and 60 mm softwood in low-bed platform * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included), each with 2 t lashing possibility * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform, 1 pair of 13.4 t lashing rings front/rear on the side outer frame, and 4 pairs of 10 t lashing rings per side, swiveling, lowerable, loadable in all directions and recessed into outer frame; 2 pairs of 6.4 t rings per side in excavator stick tray; 8 pairs of galvanized folding extensions for 3 m overall width (not at rear slope) * Widening planks stored laterally left in a storage compartment * Excavator stick tray above rear axle up to end of approach slope approx. 2300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (incl. 860 mm approach slope) * Chassis, bogie, loading ramps, and mechanical rear drop supports hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 21 / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release system for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: Dsdpfxjrvvfls Am Sjkl * Parabolic springs with compensator unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm (to a total length of 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Accessories: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Platform: * 50 mm softwood floor * Preparation in front of front wall for subsequent installation of container locks * Bolted smooth sheet metal headboard * Trapezoidal-profile steel side walls, foldable with drop-side lifting assist * Steel rear wall, can be slid between the ramps (bracket for storage inside in front of the headboard when not in use) * Bolt-on rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t recessed lashing brackets every 600 mm * One 6.3 t lashing point in each front and rear corner * Multiple drill holes in the head and end cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating access ramps with spring assembly for one-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach angle at rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, headboard, access ramps, and rear wall * Drop-side paint color in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: Dodpfx Aeq Dyvvsm Sokl * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally on the front right bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall can be inserted between ramps – storage bracket provided internally in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t drop lashing rings every 600 mm * Each corner front and rear fitted with 1 x 6.3 t lashing ring * Various bore holes in the front and rear beam for 1.2 t lashing options ----Ramps: * Single-section mechanical grating drive-on ramps with spring system for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop-side color RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost ----Information: * Reinforced and certified superstructure in accordance with EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin as well as additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel holder as basket version, mounted right side * Closed single plastic mudguard at front * Straight rear steel mudguards each with spray protection (anti-spray mist) * Side underrun protection * Extended offset by 500 mm forward * Front extension of the turntable platform by 520 mm with 45° corners, 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Floor over turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo * Each side with 4 stake pockets (no stakes included), each with 2 t lashing point * Cargo securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and each side 4 pairs of 10 t lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings in the excavator arm support, 8 pairs of galvanized fold-out markers for 3 m total width (not in the rear slope) Djdpsl Th Evjfx Am Sokl * Widening planks stored left side in a storage compartment * Excavator arm support above the rear axle to the end of the access slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp axle * Load area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm access slope) * Chassis, turntable, loading ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted black * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Stav: použitý, pohotovostná hmotnosť: 5 100 kg, maximálna hmotnosť nákladu: 12 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/1998, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 1 mm, celková dĺžka: 2 550 mm, celková šírka: 1 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, rázvor náprav: 5 400 mm, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, container locks, underrun protection, pneumatically adjustable drawbar, side aluminium side guard, twin tyres, storage box, removable side panels. Dsdpfx Aoi Rpxwjm Sskl Wheelbase: 5400 mm. Body: Trailer for hooklift containers in lengths from 6m to 6.75m. SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for insertable locking hooks, 4x pockets for insertable container centring and skip stops. The trailer can also be used as a flatbed! Aluminium side panels with a height of 600mm are included with the trailer. Loading ramps available at an additional net price of €900. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to alterations, prior sale, and errors.

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles Djdpfx Asl Thyxsm Sokl * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: Dksdpfx Amel Thymj Sol * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem balance unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm displacement via headplate) with elevated gantry for connection lines * 12 V 7 + 4-pin electrical wiring * 12 / 24 V LED lighting system with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing side * Side marker lights with indicator operation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Chassis made of fine-grain steel * Steel platform - 3-way tipper body with M-Strong side panels (fixed front wall, continuous side walls - without central posts - pendulum-mounted via manual central locking and mechanically foldable with side panel spring lifter * Hydraulic tailgate, 500 mm high, as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t lashing rings in each corner, as well as 4 x 3 t on each side, recessed and foldable * Hot-dip galvanized two-step access in front of the front wall (driver's side left) * 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacle shafts for aluminum loading ramps, recessed into the rear of the chassis, load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Superstructure painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, front support winch * K80 coupling painted in black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available from Egestorf Dkedpfor Dpzuex Am Sel

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS/EBS, with 40 km/h approval * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball head coupling ring (offset by +77 mm / 33 mm via the head plate), with elevated tower for the connection lines * 12 V, 7 + 4-pin power cable * LED lighting system 12/24 V with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle without on-vehicle installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Chassis made of high-tensile steel * Steel three-way tipper body with M-Strong sidewalls (fixed front wall, continuous side walls – without center stanchions – pendulum-mounted via manual central locking and mechanically foldable with sideboard spring lift * Hydraulic tailgate 500 mm high, serves as a hydraulic chute with a 115° opening angle Dodpfx Amer Dpz He Sokl * 4 mm Hardox 450 steel floor * One recessed and foldable lashing ring (7 t) in each corner; 4 recessed and foldable side lashing rings (3 t each) * Hot-dip galvanized two-step access ladder in front of the front wall (on the left) * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum ramps, integrated from the rear in the chassis; load securing in accordance with EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Body paintwork in RAL 9010 pure white * Chassis, drawbar, rear supports, underrun protection hot-dip galvanized * Axles, air tanks, front support winch * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and interim sale subject to change * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, celková šírka: 2 550 mm, Rok výroby: 2023, Müller Mitteltal KA-TA-R 11.9 tandem three-way tipper with numerous extras. Gross weight: 11,900 kg Payload (standard): approx. 8,750 kg Internal dimensions: 5,000 x 2,420 x 500 mm Tyres: 385/55R19.5 Four-layer paint finish, single colour Wheels: silver Chassis/side protection: hot-dip galvanized Platform body with front wall: hot-dip galvanized Axles/springs/air tanks, etc.: black Side and rear walls: RAL 2011 deep orange Reinforced and certified body according to EN 12642 XL, including load securing certificate (only in combination with 500 mm high steel sideboards). Rear stanchions bolted, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN, recessed at the front. Net hooks integrated on both sides and rear into the central lock mounts of the main sideboard, plus two additional hooks on the front wall. BPW axles instead of GIANT Tipping platform with fixed front wall in hot-dip galvanized design, with bolted, galvanized rear stanchions, without further coating (not applicable for HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially in large floor panels; complaints related to this are excluded from warranty. Tyres 385/55R19.5 instead of 235/75R17.5 (ground and coupling height + approx. 110 mm, code 08.940 ramp length of 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), position: right side of chassis frame, in direction of travel. 1 pair of aluminium loading ramps without running channels (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg each. Two-step access, in front of the front wall, left-hand side in direction of travel (hot-dip galvanized). Connecting cables extended for agricultural and forestry towing vehicles. Dkjdpfxevy Tvtj Am Sol Further information New: No

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, Rok výroby: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extras Equipment: - 2 spring-assisted lifts for 400 mm high steel side panels - Reinforced and certified body according to EN 12642 XL load securing certificate - 10 UVV lashing brackets integrated into the existing hole grid in the outer frame - Additional wooden floor in clamped design - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg payload capacity Paintwork: - Wheels silver - Chassis/front panel/drawbar/rear panel/stakes/ramps hot-dip galvanized - Axles/springs black - Side panels RAL2011 deep orange We are happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping can be arranged upon request. We always keep a selection of new equipment in stock and demonstration units available. Get in touch with us! We rent out vehicles with or without drivers and machinery. A wide range of used machines and equipment is always available. Subject to technical changes, errors, and prior sale. Dksdpfxjxcxmfj Am Ssl

Stav: použitý, maximálna hmotnosť nákladu: 7 950 kg, celková hmotnosť: 11 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2010, ďalšia kontrola (TÜV): 02/2026, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková hmotnosť: 11.000 kg Pohotovostná hmotnosť: 3.050 kg Užitočná nosnosť: 7.950 kg Celková dĺžka: 8.100 mm Dĺžka ložnej plochy: celkovo cca 6.000 mm Dkjdpox E I Utjfx Am Sel Šírka: 2.550 mm / šírka ložnej plochy cca 2.470 mm Výška nakladania: 900 mm Ďalšie informácie - výškovo nastaviteľné oj - podporná noha - bočnice 400 mm, pružinové - elektrické koleso - nápravy BPW - mrežové rampy, bočne posuvné - lezecké lišty, zadná podpera - veľký upínací balík

Stav: použitý, maximálna hmotnosť nákladu: 10 100 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2001, ďalšia kontrola (TÜV): 11/2025, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 1 000 mm, celková šírka: 2 550 mm, Celková hmotnosť: 13 500 kg Dsdpfx Asw Nu I Tjm Sjkl Prázdna hmotnosť: 3 400 kg Užitočné zaťaženie: 10 100 kg Celková dĺžka: 8 100 mm Dĺžka ložnej plochy: 6 000 mm Šírka: celková šírka 2 550 mm / šírka plošiny 2 460 mm Výška nakladania: cca 1 000 mm Ďalšie informácie - Pneumatiky 285/70R19,5 - Bočnice 400 mm, 1x delené

Stav: nový, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, zavesenie: vzduch, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Celková délka ložné plochy cca: 8 800 mm, snížený ložný prostor cca: 6 600 mm, ložná výška zatížená cca: 890 mm, 24 x upevňovací oka, každé na 10 t, 12 x kapsy na sloupky ve vnějším rámu, nájezdové rampy (cca 3 100 x 750 mm), lišta proti skluzu na vnější straně ramp a zadního náběhu, rampy bočně stavitelné, dřevěná podlaha o tloušťce 68 mm, úložný box s víkem pro upevňovací řetězy nebo popruhy, obrysové označení dle předpisů, výstražný maják, vozidlo žárově zinkováno koupelí, včetně měřiče zatížení náprav, Příplatek za: výstražné tabule s osvětlením a výstražným majákem, rozšíření na 3 m s dřevěnými deskami, cena: 500 €; hydraulické posouvání ramp, cena: 1 000 €; kapsa pro lopatu bagru, cena: 1 000 € bez DPH. --- Tiskové chyby, omyly a změny vyhrazeny, vzorové obrázky -- Více údajů na: !, Další informace: ! Dodpfx Aoy N Rx Ajm Sokl

Stav: použitý, pohotovostná hmotnosť: 6 420 kg, maximálna hmotnosť nákladu: 23 580 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2012, ďalšia kontrola (TÜV): 09/2026, zavesenie: iný, veľkosť pneumatiky: 235/75 R17,5 ---/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R17,5 ---/140J, veľkosť zadnej pneumatiky: 235/75 R17,5 ---/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Uchy na upevnenie, vrecká na stĺpiky, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotky -- Viac údajov na: !, Viac detailov: ! Dodoy Niw Rjpfx Am Sskl