Fliegl Vts 400, Verzinkt, Verbreiterbar, Hydr. Rampen kúpiť použité (8 301)

Stav: použitý, pohotovostná hmotnosť: 3 210 kg, maximálna hmotnosť nákladu: 8 690 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17.5, Rok výroby: 2021, Výbava: ABS, Nemecké vozidlo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trojstranný sklápací náves s podskrutkovanými rampami Rok výroby: 05/2021 pozinkovaný Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 3 210 kg Užitočné zaťaženie: 8 690 kg Rozmer pneumatík: 235/75 R 17,5 tandemová náprava menej ako 1 m Ťažné zariadenie plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm Rám pozinkovaný Nápravy BPW Výška podlahy: 0,93 m Možnosť ďalších služieb! Exportné značky (červené / 30 dní) Nemecko Prevozné značky (žlté / 5 dní) Nemecko Rakúske prevozné značky je možné sprostredkovať Dovoz vozidla (za poplatok) Údaje z internetu sú nezáväznými popismi. Nepredstavujú garantované vlastnosti. Predajca nezodpovedá za chyby, preklepy a chyby pri prenose dát. Predaj s výhradou medzipredaja. Predaj len podnikateľom. Platné sú výhradne naše VOP. Kdodpfjyxbgcsx Ac Ijl

Stav: použitý, pohotovostná hmotnosť: 3 210 kg, maximálna hmotnosť nákladu: 8 690 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17.5, Rok výroby: 2021, Výbava: ABS, Nemecké vozidlo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trojstranný sklápací náves s podskrutkovanými rampami Rok výroby: 05/2021 pozinkovaný Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 3 210 kg Užitočné zaťaženie: 8 690 kg Rozmer pneumatík: 235/75 R 17,5 tandemová náprava menej ako 1 m Ťažné zariadenie plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm Rám pozinkovaný Nápravy BPW Výška podlahy: 0,93 m Možnosť ďalších služieb! Ksdpfx Asyw N Npsc Iedl Exportné značky (červené / 30 dní) Nemecko Prevozné značky (žlté / 5 dní) Nemecko Rakúske prevozné značky je možné sprostredkovať Dovoz vozidla (za poplatok) Údaje z internetu sú nezáväznými popismi. Nepredstavujú garantované vlastnosti. Predajca nezodpovedá za chyby, preklepy a chyby pri prenose dát. Predaj s výhradou medzipredaja. Predaj len podnikateľom. Platné sú výhradne naše VOP.

Stav: použitý, maximálna hmotnosť nákladu: 27 700 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2005, Rok výroby: 2005, Výbava: ABS, Empl 3-nápravový nízkozdvižný príves, posledná náprava nútene riadená, hydraulické dvojité rampy cez vlastné hydraulické čerpadlo NATO. Vlastná hmotnosť: 7 300 kg Užitočné zaťaženie: 27 700 kg Dĺžka: 13,2 m Kdjdex Sbpqjpfx Ac Iel Stav: veľmi dobrý Pneumatiky: 70%

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves Kjdpsw Tgkbofx Ac Iedl * Prvá evidencia: 11/2004 * 3 nápravy * Vzduchové odpruženie * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg * Technicky prípustná celková hmotnosť: 47 000 kg * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side Kedotplwiepfx Ac Iodl * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty Kedexptn Ropfx Ac Ijdl * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, ďalšia kontrola (TÜV): 03/2024, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 910 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, listové pruženie, 3 nápravy, nápravy BPW, otočný čap, ABS (antiblokovací systém), upevňovacie oká, hydraulické rampy, zadné podpery, bočná hliníková ochrana proti podbehnutiu, dvojitá montáž pneumatík, odkladacia schránka Kdedeqpgtmjpfx Ac Iol Nadstavba: Hydraulické rampy, možné rozšíriť na 3 m. BPW nápravy, bubnové brzdy, upevňovacie krúžky na vonkajších stranách. Dĺžka ramien cca 4000 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas inzercie a chyby vyhradené!

Stav: použitý, konfigurácia náprav: 2 nápravy, Rok výroby: 2024, Výbava: ABS, Pre vaše otázky ohľadom vozidla je vám k dispozícii pán Seidel (telefonicky). Wörmann BauTL 105 55/200 nízkozdvižný príves Nápravy SAE-SMB, bubnové brzdy, ABS Knorr, pružinové zásobníky, ťažné oko 40 mm, Duomatik, rozmery ložného priestoru: dĺžka 5.600 mm, šírka 1.990 mm, výška 400 mm, vzor pneumatík: 1. náprava 14 mm, 2. náprava 13 mm Na požiadanie vám pripravíme ponuku leasingu alebo financovania. Pán Seidel (tel.) vám ochotne pomôže. Viac informácií nájdete na našej webovej stránke. Ksdjyfqa Dspfx Ac Isdl ... Zmeny, chyby a medzičasný predaj vyhradené!!! - = Ďalšie informácie = Prevádzková hmotnosť: 2.700 kg Užitočné zaťaženie: 7.800 kg Celková hmotnosť: 10.500 kg Vonkajšie rozmery: 0x2550x3200 Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: nový, pohotovostná hmotnosť: 10 100 kg, maximálna hmotnosť nákladu: 38 900 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, prevádzková hmotnosť: 10 100 kg, Výbava: ABS, Chassis: - Stable welded steel frame construction with front frame drop and flat load area, rear chamfer approx. 500x100 mm - Neck section 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear chamfer) - 2 kingpin positions with interchangeable 2” kingpin - Outer frame closed outwards with perforated profile for lashing with tension belts (no chains possible) - Reinforced frame version / point load at center of gravity - Provisions for extendable load platform wideners - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, plus 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting equipment (only in conjunction with electro-hydraulic power pack) - Width approx. 800 mm - Wooden decking - Including traction ribs on ramps - Secured in transport position with tension belts - Operation via control lever mounted rear right in direction of travel - Sideways hydraulically adjustable Kjdpowviwksfx Ac Ijdl Floor: - 35 mm larch wood flooring with aluminium omega profiles Landing gear: - Mechanical 24-ton landing legs, single-sided operation with compensating device Axles, steering and tires: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd drive height via ball valve +50mm - 1st axle with lifting function (wired via EBS), fully automatic control with mechanical emergency activation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mounted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on gooseneck approx. 400 mm high - Spare wheel holder - Side aluminum underride protection - 4 wheel chocks - Elongated license plate holder in end plate - 1 ECE removable sign board on the rear - 11 pairs ZK modules 10t at the sides: - 2x on the gooseneck - 9x on the load platform - Metal fenders with clear-pass - Extendable warning plates incl. 3 position lights each, front at landing legs and rear ahead of end plate, steplessly extendable up to load width of 4,500 mm - 4 sockets for warning plates storable in stake pockets on load platform - 6 pairs side stake pockets for 100x50 mm stakes - 2 crosswise rows of stake pockets for 100x50 mm stakes on gooseneck from outer frame to main frame (1 in front and 1 behind kingpin positions) - 3 crosswise rows of stake pockets for 100x50 mm stakes on load platform from outer frame to main frame (1 in front area, 1 in front of 1st axle and 1 behind 3rd axle) - 2 pairs steel plates in load platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer Kdedpfx Ajhlz S Njc Iol •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead Ksdpfx Asl Sl Izec Isdl 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners Ksdpfxsl Tlhro Ac Ijdl * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Ksdpfxol Tnu Ae Ac Iedl * 4 x 11 t Gigant axles * Air suspension with lift/lower function and RtR valve * Manometer pressure display for payload determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel skirts with spray protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Towing eye (50 mm) with height adjustment * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front structure in front of the bogie platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the bogie platform's steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope) * Plank holder for extensions under chassis, left longitudinal direction * Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support * Hardwood flooring on running surfaces of low-loader platform * Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * Outer planks of loading ramps made of hardwood * Steel construction prepared for 6-position control valve * Unladen loading edge approx. 950 mm +/- 20 mm (chassis) * Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, towing eye assembly painted black-- * Tyres: 235/75 R 17.5 * Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with indication possible in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour tape on the sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable LED rotating beacon at rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed plastic single mudguards at front * Straight steel mudguards at rear, each with spray protection (spray mist suppression) * Lateral underrun protection * Extended offset bend by 500 mm to the front * Bogie platform extension by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Deck over bogie platform with 50 mm softwood, and 60 mm softwood in low-bed platform * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included), each with 2 t lashing possibility Ksdsrczm Djpfx Ac Ijdl * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform, 1 pair of 13.4 t lashing rings front/rear on the side outer frame, and 4 pairs of 10 t lashing rings per side, swiveling, lowerable, loadable in all directions and recessed into outer frame; 2 pairs of 6.4 t rings per side in excavator stick tray; 8 pairs of galvanized folding extensions for 3 m overall width (not at rear slope) * Widening planks stored laterally left in a storage compartment * Excavator stick tray above rear axle up to end of approach slope approx. 2300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (incl. 860 mm approach slope) * Chassis, bogie, loading ramps, and mechanical rear drop supports hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 21 / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes Kdedpfx Asl Th Evoc Iol * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin as well as additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel holder as basket version, mounted right side * Closed single plastic mudguard at front * Straight rear steel mudguards each with spray protection (anti-spray mist) * Side underrun protection * Extended offset by 500 mm forward * Front extension of the turntable platform by 520 mm with 45° corners, 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Floor over turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo * Each side with 4 stake pockets (no stakes included), each with 2 t lashing point * Cargo securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and each side 4 pairs of 10 t lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings in the excavator arm support, 8 pairs of galvanized fold-out markers for 3 m total width (not in the rear slope) * Widening planks stored left side in a storage compartment * Excavator arm support above the rear axle to the end of the access slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp axle * Load area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm access slope) * Chassis, turntable, loading ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted black * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Stav: použitý, Rok výroby: 2005, Hlboká lyžica. Upnutie Verachtert CW 20-30-40. Šírka cca 400 mm s hydraulickým vyhadzovačom. Kjdjx Evrmepfx Ac Ijdl = Ďalšie informácie = Určenie: Stavebníctvo Pre viac informácií kontaktujte Jan-Marc Schwickert.

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem balance unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm displacement via headplate) with elevated gantry for connection lines * 12 V 7 + 4-pin electrical wiring * 12 / 24 V LED lighting system with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing side * Side marker lights with indicator operation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Chassis made of fine-grain steel * Steel platform - 3-way tipper body with M-Strong side panels (fixed front wall, continuous side walls - without central posts - pendulum-mounted via manual central locking and mechanically foldable with side panel spring lifter * Hydraulic tailgate, 500 mm high, as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t lashing rings in each corner, as well as 4 x 3 t on each side, recessed and foldable * Hot-dip galvanized two-step access in front of the front wall (driver's side left) * 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacle shafts for aluminum loading ramps, recessed into the rear of the chassis, load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Superstructure painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, front support winch * K80 coupling painted in black * New vehicle with manufacturer warranty Kodpfx Aor Dpzusc Ijdl * Errors and prior sale reserved * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS/EBS, with 40 km/h approval * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball head coupling ring (offset by +77 mm / 33 mm via the head plate), with elevated tower for the connection lines * 12 V, 7 + 4-pin power cable * LED lighting system 12/24 V with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle without on-vehicle installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Chassis made of high-tensile steel * Steel three-way tipper body with M-Strong sidewalls (fixed front wall, continuous side walls – without center stanchions – pendulum-mounted via manual central locking and mechanically foldable with sideboard spring lift * Hydraulic tailgate 500 mm high, serves as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * One recessed and foldable lashing ring (7 t) in each corner; 4 recessed and foldable side lashing rings (3 t each) * Hot-dip galvanized two-step access ladder in front of the front wall (on the left) * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum ramps, integrated from the rear in the chassis; load securing in accordance with EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Body paintwork in RAL 9010 pure white * Chassis, drawbar, rear supports, underrun protection hot-dip galvanized Kdodpfer Dpz Hex Ac Iel * Axles, air tanks, front support winch * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and interim sale subject to change * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 619 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 240 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Rok výroby: 2025, Výbava: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t ramps | Top Equipment Location: Germany Condition: New / unused Availability: Immediately Description For sale: a brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader trailer, year 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. Technical Specifications Dimensions • Total length: 13,190 mm • Platform length: 9,240 mm • Platform height: 875 mm • Total width: 2,550 mm (+600 mm with side extensions) • Gooseneck length: 3,950 mm • Unladen weight: approx. 10,381 kg Weights • Perm. total weight at 80 km/h: 48,000 kg • Perm. total weight at 60 km/h: 52,800 kg • Total axle load: 30,000 kg • King pin load: up to 18,000 kg Running Gear & Axles Ksdpsx Efzusfx Ac Iodl • 3 BPW axles, air-suspended, drum brakes • 1 trailing axle at rear • Lift axle (load-dependent + automatic control from cab) • Tyres: 245/70 R17.5, M+S + 3PMSF • Tyre pressure monitoring R141 • Wabco EBS 4S/3M, ABS + RSS • Wabco Smartboard (axle load, suspension, diagnostics, etc.) Ramps & Loading Area • Folding 40t drive-on ramps • Ramp length: 2,750 mm • Ramp width: 850 mm • Hydraulic sliding system • 45-mm hardwood floor + checker plate over wheel arches Load Securing • Multiple lashing points: 8,000 daN and 13,400 daN • 7×2 stake pockets + plug-in stakes • Container locks for 1×20 ft • Front wall 450 mm, side & rear walls made of aluminium Body & Chassis • High-strength S700 MC steel • Partially metallized (Zn/Al 85/15) – strong corrosion protection • Rear angle: 10°, 500 mm • 2" king pin • Mechanical support legs at front • 45t supports at rear Equipment • 2× tool boxes • Rotating beacon • LED lighting • Rear work lights • Wheel chocks • Extensions 9×2 (up to +300 mm) • Stake box • Side & rear reflector strips Colour: RAL 3020 Traffic Red For further information, please feel free to contact us.

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Kdjdpfxemfqi Io Ac Isl Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: použitý, konfigurácia náprav: 2 nápravy, Rok výroby: 2020, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = Ksdpsy Ada Tefx Ac Isdl - Vzduchové odpruženie vzadu - Vzduchové odpruženie vpredu = Poznámky = S otázkami ohľadom vozidla sa, prosím, obráťte na pána Seidela (telefónne číslo na požiadanie). Fliegl TPS 119 plošina Vzduchové odpruženie, 40 mm ťažné oko, Duomatic, nápravy GFA, ABS Knorr, pružinová brzda, najazdové rampy, celková prípustná hmotnosť: 11 900 kg, pohotovostná hmotnosť: 3 250 kg, užitočné zaťaženie: 8 650 kg, rozmery ložnej plochy: D 6 200 mm x Š 2 490 mm x V 380 mm, profil pneumatík: 1. náprava 10 mm, 2. náprava 10 mm Na požiadanie Vám radi pripravíme leasingovú alebo finančnú ponuku. Pán Seidel Vám rád poskytne ďalšie informácie na uvedenom telefónnom čísle. Viac informácií nájdete na našej webovej stránke. ... Zmena, chyba a medzipredaj vyhradené !!! - = Ďalšie informácie = Pohotovostná hmotnosť: 3 250 kg Užitočné zaťaženie: 8 650 kg Celková hmotnosť: 11 900 kg Rozmery ložného priestoru (DxŠxV): 6200 x 2490 x 380 Posledná kontrola: 07/2026 Pre viac informácií kontaktujte pána Tobiase Eberta.

Stav: nový, maximálna hmotnosť nákladu: 18 400 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 5 900 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 860 mm, celková šírka: 2 520 mm, Celková hmotnosť: 24 000 kg / 30 000 kg Prevádzková hmotnosť: 5 600 kg Užitočné zaťaženie: 18 400 / 24 400 kg Celková dĺžka: 10 290 mm Dĺžka ložnej plochy: 5 900 mm vrátane zadného nábehu Šírka: 2 520 mm Ložná výška: 860 mm Ďalšie informácie plus predprava / príprava na odbernom sklade 26639 Wiesmoor 1 280,00 €/netto Podvozok nízkoložného prívesu Oceľová zváraná konštrukcia Otočný tanier s robustným guľovým ložiskom Sklopná zadná podpera 2 podložné kliny s držiakom Zadné blatníky po celej šírke (nie v kombinácii s držiakom na vysokozdvižný vozík) 1 plastový náradový box, šírka = 600 / výška = 425 / hĺbka = 460 mm, uzamykateľný Príprava na rozšírenie na 3 000 mm (otvory v vonkajšom ráme s krytkou, nie v zadnom nábehu) Zaisťovacie oká nízkoložného prívesu 1 pár zaisťovacích výrezov v prednom pozdĺžniku na ohybe, každý 10 t 7 párov zaisťovacích hríbov hore a po bokoch vo vonkajšom ráme, každý 10 t 1 x vpredu na ohybe 5 x na nízkej ploche 1 x v zadnom nábehu 12 párov zaisťovacích otvorov vo vonkajšom ráme, každý 5 t (na uchytenie upínacích pásov) 5 x ohyb, 6 x nízka plocha a 1 x zadný nábeh Ťahacie zariadenie prívesu s otočným tanierom Ťažné oje so skúšaným 40 mm ťažným okom Nastavenie výšky ťažného oja pomocou pružiny Nápravy a odpruženie Bubnové brzdové nápravy podľa výberu výrobcu Laserové meranie náprav / podvozku – znižuje opotrebenie pneumatík a spotrebu paliva Parabolické odpruženie s bezúdržbovým oceľovo-gumovým uložením a mechanickým vyrovnávaním náprav (kolískový vyrovnávač) Kolesá a pneumatiky 235 / 75 R 17,5" podľa výberu výrobcu Oceľové disky v dvojitej montáži, továrenská strieborná farba Brzdový systém Dvojhadicový vzduchový brzdový systém Pružinová parkovacia brzda 2 nezameniteľné brzdové hlavice vpredu s prepojovacími vedením k ťažnému vozidlu, vedenia predĺžené cca o 60 cm bez ABS, ale s mechanickým ALB, max. povolená rýchlosť 60 km/h Elektrika 12 V, viackomorové svetlá, bez bočného žltého LED osvetlenia, po bokoch odrazky 2 biele pozičné svetlá vpredu Kedpfxoynvrwo Ac Iedl 2 bielo/červené obrysové svetlá vzadu 1 x 7-pólová 12 V zásuvka vpredu s prepojovacím káblom, predĺžené cca o 60 cm 1 LED maják s držiakom, ovládaný cez parkovacie svetlo (maják snímateľný) 2 páry výsuvných a osvetlených výstražných tabúľ na 3 000 mm Podlaha Predný ohyb s oceľovým/riflovaným plechom Úložný box je zapustený do nábehu k ohybu potom cca 70 mm mäkké drevo, v oblasti blatníkov oceľový/riflovaný plech Zadný nábeh so 70 mm mäkkým drevom Nízka ložná plocha vrátane zadného nábehu 5900 mm Najazdové rampy Oceľové rampy cca 3 000 mm dlhé, 750 mm široké, bočne nastaviteľné so drevenou výplňou (vrcholová časť s oceľovým/riflovaným plechom) Hydraulicky ovládané cez pomocný pohon ťažného vozidla s tlmičom, ovládanie bočne vľavo v smere jazdy Hydraulické pripojenie s SVK konektorom NW 10/3 vrátane spojovacej hadice Prevádzkové poznámky Pri 10 000 kg zaťažení nápravy je potrebné výnimočné povolenie, možný je len nedeliteľný náklad!!! Uvedená celková hmotnosť je technicky možná, v závislosti od nákladu nemusí byť možné dosiahnuť celkovú hmotnosť pri dodržaní povolených hmotností na nápravy, oje a sedlo. (Zlé jazdné a riadiace vlastnosti pri nesprávnom rozložení nákladu sú možné) Krajina schválenia/ EČV Krajina schválenia: Nemecko s Dekra schválením a posudkom na max. 60 km/h, ťažné vozidlo LoF, (V krajine schválenia Švajčiarsko max. 40 km/h možné) pripravené na dvojriadkové držiaky ŠPZ bez obrysového značenia/ reflexných pásov podľa ECE R 048 Lakovanie Rám žiarovo pozinkovaný

Stav: nový, maximálna hmotnosť nákladu: 18 400 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 5 900 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 860 mm, celková šírka: 2 520 mm, Celková hmotnost: 24 000 kg / 30 000 kg Provozní hmotnost: 5 600 kg Užitečné zatížení: 18 400 / 24 400 kg Celková délka: 10 290 mm Délka ložné plochy: 5 900 mm včetně zadního zkosení Šířka: 2 520 mm Výška ložné plochy: 860 mm Další informace plus předběžné náklady / příprava ze skladového místa 26639 Wiesmoor 1 280,00 € / bez DPH Podvozek - podvalníkový přívěs Ocelová svařovaná konstrukce Otočný čep s robustním kuličkovým věncem Sklopné zadní opěry Klíny pod kola s držákem Zadní zástěrky po celé šířce 1 plastová skříňka na nářadí Příprava na rozšíření na 3 000 mm (otvory v vnějším rámu s krytem, nikoliv v zadním zkosení) Upevňovací oka nízkoložného přívěsu 1 pár upevňovacích vybrání v předním podélníku na ohybu, každý 10 t 7 párů upevňovacích hřibů zapuštěných nahoře a na boku vnějšího rámu, každý 10 t 1x vpředu na ohybu 5x v hluboké ložné ploše 1x v zadním zkosení 12 párů upevňovacích otvorů ve vnějším rámu po 5 t (pro připojení poutacích pásů) 5x ohyb, 6x hluboká ložná plocha a 1x zadní zkosení Tažné zařízení přívěsu – otočný čep Tažná oje s homologovaným tažným okem 40 mm Nastavení výšky tažné oje pružinou Kdsdpfxswlmr De Ac Iel Nápravy a odpružení Bubnové brzdové nápravy dle volby výrobce „Nápravy/podvozek laserově zaměřené“ – snížení opotřebení pneumatik a spotřeby paliva Parabolické odpružení s bezúdržbovým ocelovo-gumovým uložením a mechanickým vyrovnáním zatížení nápravy (kolébko) Kola a pneumatiky 235/75 R 17,5“ podle volby výrobce Ocelové ráfky v dvojmontáži, tovární stříbrná Brzdová soustava Dvouvodičová vzduchová brzdová soustava Parkovací brzda s pružinovým akumulátorem 2 nezaměnitelné rychlospojky v přední části, s propojovacími hadicemi k tahači, prodloužení cca 60 cm bez ABS, ale s mechanickým ALB, pak max. 60 km/h schválení Elektroinstalace 12 Volt, vícekomorové svítilny, bez bočního žlutého LED osvětlení, boční odrazky 2 bílé obrysové svítilny vpředu 2 bílo-červené koncové svítilny vzadu 1x 7kolíková 12V zásuvka vpředu s propojovacím kabelem, prodloužení cca 60 cm 1 LED maják s držákem, ovládaný přes parkovací světla (maják odnímatelný) 2 páry varovných tabulí, oboustranně LED osvětlené a vysouvatelné do 3 000 mm Podlaha Přední ohyb s ocelovým / žebrovaným plechem Úložný box ve sklopení k ohybu Dále podlaha měkké dřevo 70 mm, v oblasti blatníků žebrovaný ocelový plech Zadní zkosení s podlahou z měkkého dřeva 70 mm Nízkoložná plošina vč. zad. zkosení 5 900 mm Nájezdové rampy Ocelové rampy, délka 2 800 mm, šířka 750 mm, bočně posuvné s dřevěným povrchem (koncová část ocel/žebrovaný plech) Hydraulicky poháněné z pomocného pohonu tažného vozidla s tlumičem, ovládání zboku vlevo Hydraulické připojení se SVK zástrčkou NW 10/3, vč. propojovací hadice Provozní pokyny Při 10 000 kg zatížení nápravy je nutné výjimka, možné pouze nedělitelné náklady! Uvedená celková hmotnost je technicky možná, v závislosti na přepravovaném zboží nemusí být možné dosáhnout celkové hmotnosti s ohledem na povolené zatížení náprav, opěr a sedla. (Špatné jízdní vlastnosti a chování v závěsu kvůli chybné distribuci zátěže je možné) Země registrace / značky Země registrace: Německo s prověrkou Dekra a zprávou, pro max. 60 km/h schválení, tažné vozidlo LoF, (země registrace Švýcarsko max. 40 km/h možné) připraveno pro dvouřádkový držák SPZ bez značení obrysu / reflexních pruhů dle ECE R 048 Lakování Rám RAL 7021 černá šedá „10 let záruka proti prorezivění“ Tažná oje pozinkovaná Nájezdové rampy žárově zinkované

Stav: nový, maximálna hmotnosť nákladu: 17 900 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 670 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 860 mm, celková šírka: 2 520 mm, From ongoing production Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm load bed Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear stabilizers Wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps (not in conjunction with forklift bracket) Half-shell mudguards on axle 1 with anti-spray flaps Anti-spray flaps behind axles 2 and 3 Plastic toolbox Extendable widening to 3,000 mm Central storage compartment for wooden planks on the loading area 70 mm wooden planks for widening to 3,000 mm Tie-down points low-bed trailer 1 pair of lashing recesses in the longitudinal beam front on gooseneck, 10 t each 4 pairs of lashing holes in the outer frame of the gooseneck, 5 t each (for attaching lashing straps) 7 pairs of lashing mushrooms recessed on top and side of the outer frame, 10 t each 1x front on gooseneck, 6x in low-bed Pair of ring lashing eyes recessed in outer frame, 5 t each (convertible to stake pockets) Pair of additional folding lashing eyes, 10 t each 1x on gooseneck 1x recessed in floor behind last axle Drawbar assembly trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustable via spring Axles + Suspension Kedpouytx Sjfx Ac Iodl Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" manufacturer’s choice Steel twin rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 foolproof coupling heads at the front, with connecting lines to the tractor unit 24 Volt ABS and ALB, with ABS socket at the front, with connecting cable Electrical system 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof connectors front, with connecting cable LED rotating beacon with bracket, controlled via parking lights (removable beacon) Pair of double warning boards, LED illuminated and extendable to 3,000 mm Floor Gooseneck front with steel/chequer plate covering Storage box recessed in the transition slope to gooseneck Then approx. 70 mm softwood floor, in wheel arch areas with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-bed area incl. rear slope 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp locking underneath, foldable (anti-slip of ramps, not in conjunction with laterally hydraulic ramp displacement) With wooden covering (tip area with steel/chequer plate) Hydraulically operated via tractor hydraulic PTO with throttle, control on the left side of the vehicle Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Coating Frame hot-dip galvanized incl. passivation Loading ramps hot-dip galvanized plus pre-freight / provision ex stock location 26639 Wiesmoor €1,280.00 / net

Stav: nový, maximálna hmotnosť nákladu: 17 900 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 670 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 860 mm, celková šírka: 2 520 mm, New Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Loading length: total 8,670 mm, 6,500 mm lower deck including rear incline / 2,170 mm gooseneck Width: 2,520 mm Loading height: 860 mm Further information Plus shipping / provision from stock location 26639 Wiesmoor: €1,280.00 net Lease purchase offer: 48 months term, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with robust ball-bearing slewing ring Rear supports foldable Chocks with holders Side underrun protection aluminum Rear full-width splash flaps (not with forklift bracket) Half-shell mudguards 1st axle with anti-spray splash flaps Anti-spray splash flaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable widening to 3,000 mm (not in rear inclination) (Track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Stowage compartment for timber boarding in center of loading area 70 mm timber boarding for widening to 3,000 mm Tie-down points – low loader 1 pair of lashing recesses in front longitudinal beam, 10 t each 4 pairs of lashing holes in gooseneck outer frame, 5 t each (for attaching lashing straps) 7 pairs of lashing mushrooms recessed on top and side in the outer frame, 10 t each 1 at the front on the gooseneck 6 in the lower deck First lashing eye 250 mm from the front, and the last max. 250 mm from the rear; spacing not greater than 1,100 mm 5 pairs of ring lashing eyes recessed in the outer frame, 5 t each (convertible to stake pockets) 2 pairs of folding lashing eyes additionally, 10 t each 1 on the gooseneck (protruding) 1 behind the last axle recessed in the floor Drawbar coupling – turntable trailer Drawbar with tested 40 mm drawbar eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser measured" - reduces tyre wear and fuel consumption Air suspension with raise/lower valve Wheels and tyres 235/75 R 17.5" Manufacturer’s choice Steel twin wheels, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake Vehicle driving stability system Axle load detection via EBS can-bus signal for display in cab, truck must be suitably equipped, no truck installation (not a certified scale) 2 error-proof coupling heads at the front with connecting lines to tractor unit, 24 volt EBS, Electronic braking system with EBS plug at the front, including connecting cable Note: The trailer may only be towed by towing vehicles that ensure effective ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side marker lights Kjdpfx Aov D T R Ejc Iedl 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof plugs at the front with connecting cable 1 LED beacon with bracket, switchable via parking light (removable lamp) 2 pairs of warning boards, LED illuminated, extendable to 3,000 mm Floor construction Gooseneck at front with steel / checker plate cladding Stowage box in ramp slope to gooseneck Then approx. 70 mm softwood flooring, steel/checker plate in wheel arch area Rear incline with 70 mm softwood floor Low loader deck including rear incline 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, lateral