Príves so štandardnou nadstavbou kúpiť použité (5)

Stav: takmer ako nový (použitý), Funkcionalita: obmedzená funkčnosť, celková hmotnosť: 1 300 kg, pohotovostná hmotnosť: 1 030 kg, maximálna hmotnosť nákladu: 1 800 kg, konfigurácia náprav: 1 náprava, farba: žltá, Výbava: chladiaca jednotka, prípojné zariadenie, Na predaj: Úplne zreštaurovaný food trailer – okamžite pripravený na prevádzku! Chcete si splniť sen o vlastnej food truck prevádzke? Tento kompletne zrekonštruovaný food trailer je presne to, čo hľadáte! Hedpfxexmr R Ee Aabsfn ✅ Kompletná renovácia: Vo vynikajúcom stave zvnútra aj zvonka, ihneď pripravený na nasadenie. ✅ Hygienický a praktický: S čistým pracovným priestorom, profesionálnymi zariadeniami a schválenou elektroinštaláciou a plynovou inštaláciou. ✅ Flexibilné využitie: Ideálny na streetfood, snacky, hamburgery, hranolky, zmrzlinu, kávu alebo iné koncepty. ✅ Štýlový a nápadný: Upúta pozornosť na každej akcii alebo stálej prevádzke. ✅ Vrátane všetkých revízií: Spĺňa všetky zákonné normy, platné revízne správy a certifikáty. Špecifikácia: Dĺžka: 350 cm, šírka: 200 cm, výška: 250 cm Rok renovácie: úplne zrekonštruovaný 2024 Vybavenie: • Plne výsuvný chladiaci pult • Croque-gril so 9 svorkami • Plynová platňa • Mikrovlnná rúra • Umývadlo • 2 skladacie okrúhle stoly so 6 barovými stoličkami Cena: 12 500 EUR Lokalita: Izegem Máte záujem? Neváhajte zavolať, napísať SMS alebo e-mail pre viac informácií, fotografie či obhliadku! Využite túto príležitosť a začnite svoje vlastné food podnikanie už zajtra! 🚚🍔🍟

Stav: použitý, Funkcionalita: neoverené, pohotovostná hmotnosť: 9 000 kg, maximálna hmotnosť nákladu: 19 000 kg, dĺžka ložného priestoru: 7 500 mm, šírka ložného priestoru: 2 500 mm, prvá registrácia: 02/2004, Rok výroby: 2004, číslo stroja/vozidla: SA1001, Použitý príves na prepravu. Podvozok a BDF nadstavba sú stále v dobrom stave. Hfjdpsvkpngjfx Aabon

Stav: nový, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5 3pmsf, farba: sivý, Výbava: ABS, Loading platform: Cranked loading platform with rear chamfer of approx. 500 mm x 8° Recess in the chamfer, extending into the platform, for accommodating the excavator dipper stick (approx. 2365 x 750 x 235/290 mm [L x W x H]). 4 pairs of folding tie-down rings on the outer sides (LC 5,000 daN) 2 pairs of folding tie-down rings on the outer sides (LC 10,000 daN) 2 pairs of flat tie-down rings mounted at the front of the platform (LC 5,000 daN) 1 pair of flat tie-down rings mounted at the front of the platform (LC 10,000 daN) Cutouts in the external frame of the platform for lashing straps (LC 2,000 daN) Hardwood flooring approx. 48 mm thick above the axles Checker plate flooring Braking system: Braking system compliant with EU regulations with EBS-E (2S2M) and EBS coiled cable to the tractor unit Steel construction: Steel structure made from high-strength fine-grained steel Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame provided by a two-component (2K) zinc-dust primer High-quality single-colour two-component (2K) topcoat in Novagrau Rear section metalized and painted in RAL 9010 (pure white) No metallic finish available Electrical system: Electrical system compliant with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX with sockets 24N, 24S & 15-pin Connections compliant with ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Hfsdeiziatspfx Aabon Axles and tyres: BPW axles, air suspension, drum brakes, with lift/lower function Axle tools Tyres: 235/75 R 17.5 3PMSF One-piece steel ramps: One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering Ramp with hydraulic lifting unit and hydraulically movable Maximum load capacity per pair: 40,000 kg Accessories included: Turntable with tow bar approx. +/- 1,750 mm long, with 50 mm diameter towing eye Coupling height loaded: 830-1,010 mm 15/2x7-pin spiral cable Yellow-red air couplings One mud flap at the rear of the trailer Manual and description on USB stick Bracket for rotating beacon at the rear of the trailer European reflective plates (red-yellow) at the rear of the trailer White reflective tape according to EU regulations on the sides of the trailer, and red at the rear Ramp control valves located on the right side of the trailer Galvanized supports under the platform chamfer Electro-hydraulic unit mounted at the rear under the loading platform Cover plates bridging the gap between ramps and loading platform 4 wheel chocks with holders 6 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform Four warning panels extendable by approx. 400 mm, dimensions approx. 423 x 423 mm, with LED position light On the warning panels, a holder for a rotating beacon Non-slip sand-coated finish painted on the centre beam 80 km/h speed stickers on the rear and on both sides Installation of the individual ramps on the trailer HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot-blasted, defined visible surfaces subsequently metalized with ZINACOR 850 (zinc 85% - aluminium 15%) hot finished Galvanized, extendable widenings by approx. 230 mm on each side 2 axle load gauges for determining axle loads, including load diagram

Stav: nový, číslo stroja/vozidla: 084, ECOSLIM 2-OSÝ PRÍVES, NOVÝ, ADR, PREDNÝ A ZADNÝ HYDRAULICKÝ ZÁMOK, KOTÚČOVÉ BRZDY, STABILIZAČNÁ TYČ, PNEUMATICKÉ ODPRUŽENIE S AUTOMATICKÝM VYROVNÁVANÍM, PLNÁ VÝBAVA Hjdpsf Rmwvsfx Aabefn

Stav: nový, celková hmotnosť: 36 000 kg, pohotovostná hmotnosť: 7 100 kg, maximálna hmotnosť nákladu: 28 900 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5 3PMSF, farba: sivý, Výbava: ABS, Cargo area: Stepped cargo area with rear bevel approx. 500 mm x 8° 4 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 2 pairs of recessed lashing rings at the front of the cargo area (LC 5,000 daN) 1 pair of recessed lashing rings at the front of the cargo area (LC 10,000 daN) Cut-outs in the outer frame of the cargo area for attaching tension straps (LC 2,000 daN) Hardwood floor approx. 48 mm thick, over the axles chequered plate covering Axles and tyres: BPW axles, air-suspended, with drum brakes, raising/lowering function Axle tools Tyres 245/70 R 17.5 3PMSF Load index (146/146F) One-piece steel ramps: One pair hot-dip galvanized one-piece steel ramps approx. 3,000 x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulic lifting device, hydraulically adjustable Maximum load per pair: 40,000 kg Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) and EBS coiled cable for the tractor unit Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in single colour Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX with sockets 24N, 24S & 15-pin Connection in accordance with ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: Turntable with a +/- 1,750 mm long drawbar, with towing eye (40 mm diameter) Hitch height 830-1,010 mm loaded Coiled cable 15/2x7 pin Yellow-red air couplings One mud flap at the rear of the semi-trailer Manual and description on USB stick A bracket for a rotating beacon at the rear of the trailer European reflector plates (red-yellow) at the rear of the trailer Yellow reflector tape according to EU regulations on the sides and rear of the trailer Control valves for the ramps located on the right-hand side of the trailer Galvanized supports under the sloped area of the loading surface Truck hydraulic connection with flow control Cover plates for bridging the gap between ramps and loading area A toolbox INOX 1,350 x 400 x 400 mm located front and centre Extendable galvanized extensions approx. 230 mm each side Four extendable warning panels approx. 423 x 423 mm (extendable by approx. 400 mm) with a position light Hjdpfxjr E Uw Re Aabofn On the warning panels, mount for rotating beacon Speed sticker 60 km/h at the rear HRM metallization (High Resistance Metallization) of the outer frame Complete steel structure shot blasted, then defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Aluminium 15%)