Nízkozdvižný príves

Stema Ateo 2 Autotransportanhänger

Stav: veľmi dobrý (použitý), najazdené kilometre: 264 500 km, výkon: 460 kW (625,43 k), prvá registrácia: 03/2018, typ paliva: nafta, veľkosť pneumatiky: 385/65R22,5, konfigurácia náprav: 6x4, rázvor náprav: 3 300 mm, palivo: nafta, kapacita palivovej nádrže: 900 l, brzdy: retardér, farba: červená, kabína vodiča: spacia kabína, typ prevodu: automatický, emisná trieda: Euro 6, Rok výroby: 2018, Výbava: AdBlue, retardér, = Ďalšie možnosti a príslušenstvo = - PTO (vývodový hriadeľ) = Ďalšie informácie = Prevodovka Prevodovka: Powershift 3 / G 280-16/11.7-0.69, automatická Konfigurácia náprav Predná náprava: Rozmer pneumatík: 385/65R22,5; Max. zaťaženie nápravy: 8000 kg; Riadená Zadná náprava 1: Rozmer pneumatík: 315/80R22,5; Dvojmontáž; Max. zaťaženie nápravy: 13000 kg Zadná náprava 2: Rozmer pneumatík: 315/80R22,5; Dvojmontáž; Max. zaťaženie nápravy: 13000 kg Hmotnosti Nosnosť: 180.000 kg Celková povolená hmotnosť: 33.000 kg Funkčne Značka nadstavby: Mercedes Gedpeuu E Tvefx Ag Totw Stav Technický stav: veľmi dobrý Optický stav: veľmi dobrý Finančné informácie Cena: na vyžiadanie Ďalšie informácie Pre viac informácií kontaktujte Stefana Schaapvelda.

Stav: nový, maximálna hmotnosť nákladu: 37 635 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment. Complete equipment details available upon request. Gooseneck: * Gooseneck with beveled front corners, approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick One-piece steel ramps: * One pair of galvanized, one-piece steel ramps, approx. 3,000 x 800 mm, with hardwood covering approx. 48 mm thick * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg According to Regulation 1230/2012/EU, ramps with a length less than 300 mm in driving position do not count towards the overall vehicle length. Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips, approx. 15 x 15 mm, and extensions at the lower section * Between the 1st and 2nd axle, another pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the slant and protruding into the loading area for accommodating the excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN); 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t). Axles: * BPW axles and suspension, 2 fixed axles, 1 steered trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reverse gear and manually * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via standardized EBS interface as per ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: Gtedsxtc Ubopfx Ag Tew * Steel structure made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the wiring loom front with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted with turbine system after welding * Second shot blast treatment using corundum for optimal adhesion of the coating system * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paintwork tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including the following additional equipment: * 2 inch ki

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: Gtodpsq Euakjfx Ag Tjw * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: použitý, maximálna hmotnosť nákladu: 31 870 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2024, ďalšia kontrola (TÜV): 03/2026, celková šírka: 2 550 mm, celková výška: 3 130 mm, Výbava: ABS, K.SLS ECO nízkoložný návěs s hydraulickými rampami, jako nový Technické údaje: - Výška točnice: 1 250 mm - Vnější délka: 13 190 mm - Délka husího krku: 3 950 mm - Délka ložné plochy: 9 240 mm - Výška ložné plochy: 875 mm - Rozvor: 8 100 mm - Celková šířka: 2 550 mm - Provozní hmotnost: 10 130 kg - Celková přípustná hmotnost (60 km/h): 52 800 kg - Celková přípustná hmotnost (80 km/h): 48 000 kg -----Podvozek: - Nápravy BPW s pneumatickým odpružením a bubnovými brzdami - 2x tuhé přední nápravy, 1x samosměrná náprava vzadu - Brzdový systém WABCO - Obutí: 12x 245/70 R17.5 - 1x držák rezervního kola na čelní stěně - 1x zátěžový manometr - Zásuvka NATO -----Rám: - Vysoce pevná ocel S700 MC - Husí krk s 90° rohy - 45 mm tvrdé dřevěné podlahy - Podpěry Jost, sklápěcí vzadu - Skloněné zadní čelo: 500x10° -----Rampa: - Nosnost nájezdových ramp: 40 tun - 2x dlouhé hydraulické rampy, posuvné do stran - 40 mm tvrdé dřevěné obložení - Rozměry: 3 800 mm dlouhé, 850 mm široké - S ochranným napínacím řetězem pro rampu -----Zajištění nákladu & vybavení: - Zajišťovací oka a kapsy pro sloupky se zasouvacími sloupky - 6x uzamykací zařízení kontejnerů (1x 20stopý kontejner) - Ocelová čelní stěna (450 x 2 550 mm) - 2x hliníkové bočnice (360 x 1 500 mm) - 1x hliníkové zadní čelo (360 x 2 550 mm) - Velká vnitřní schránka vpředu před čelní stěnou - Boční schránka -----Příslušenství: - Skříň na nářadí - 1x výstražné majáky - 1x pracovní reflektor - 2x2 tabule pro nadrozměrná vozidla s LED - Sada pro nadrozměrné náklady: výsuvné podpěry & dřevěné fošny Gsdpow A D D Sefx Ag Totw -----Barva podvozku: RAL 3020 signální červená Pro více informací nás neváhejte kontaktovat.