Nízkopodlažný náves

FAYMONVILLE 4(2+2)-Achs MULTIMAX Baggermulde TELE 2xNachlauf

FYAMONVILLE 4(2+2)-axle MULTIMAX low-bed semi-trailer, air-suspended, 2 self-tracking axles
Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM
German trailer, first owner
4.1 m extension, fully hydraulic ramps and supports, wheel recesses, extensions, ALUMINIUM WHEELS, FULL EQUIPMENT!!!
Gooseneck:
Gooseneck SNT design approx. 3.7 m, chamfer approx. 1,000 mm x 10°
Loading platform:
Extendable loading platform, length approx. 8.8 m, chamfer approx. 500 mm x 10°
Excavator bucket recess approx. 2490x750x210 mm
Ramps:
1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm
Hydraulically folding ramp tips
Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward
Axles and suspension:
4x BPW axles 12 t, 2 rigid, 2 self-tracking axles
Electromagnetic reverse interlock reverse gear + manual
Air suspension with lifting/lowering valve
Tyres: 235/75 R17.5 3PMSF MICHELIN | PIRELLI Load index: 143/141J (144/144F), spare wheel NEW
16x powder-coated ALUMINIUM WHEELS
Brake system WABCO, EBS-E EU regulations
24V lighting system by ASPÖCK-NORDIK
ASPÖCK-UNIBOX sockets 24N, 24S & 15-pin
PAINTWORK
Standard HRM metallization of external frame
Complete steel construction shot-blasted, ARC-ZINC-COATED ZINACOR 850 (85% zinc - 15% aluminium) hot-refined
Steel construction, steel grades:
* S355J2+N/S355MC (yield strength 355MPa)
* S690QL/S700MC (yield strength 690MPa)
* Welders certified per DIN-EN 287-1
* MAG welding process per EN ISO 4063
* Shielding gas M21 per EN ISO 14175
Accessories:
* Removable steel front wall, approx. 400 mm high
* NATO socket + spiral cable
* 3 kW electro-hydraulic unit for hydraulic functions
* Spare wheel holder on the front wall
* Mounting holes for bolted lashing rings
* First hole approx. 200 mm from the front, then every 400 mm
* 2 pairs of screw-in lashing rings (LC 5,000 daN)
* Mounting hole in the rear upper area of the outer beams
* 1 pair of screw-in lashing rings (LC 10,000 daN)
* Gooseneck approx. 40 mm thick hardwood flooring
* 1 pair of removable aluminium side walls, aluminium rear wall approx. 400 mm high, anodized
* 2-inch king pin
* Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide
* 4 wheel chocks with holders
* Mounts for aluminium drive-on ramps
* JOST mechanical landing gear with 2-speed gearbox and crank handle
* Continuous hardwood flooring (approx. 50 mm) on loading platform, interrupted between the axles
Rodpsy Iq Arefx Advet
* Loading platform locking with conically welded locking profiles, 250 mm incl. pre-tensioning plate
* Long holes for hook-in and repositionable bridging elements at the front of the loading platform
* 1 intermediate table with stepped loading platform, approx. 300 mm wide for the extension tube
* Front and rear with long holes for hook-in and repositionable bridging elements
* Removable cover flush with loading platform
* Extensions extendable approx. 230 mm per side
* 1 pair of fixed open wheel recesses up to the extension, approx. 700 x 410 mm, in the loading platform before the 1st axle
* Covers for wheel recesses longitudinally divided, with wooden covering, external with plug-in safety locks
* Wheel recesses with metal covering and 15 x 15 mm square climbing bars every 200 mm
* Between 2nd and 3rd axles, in the loading platform, 1 pair of fixed wheel recesses
* 25 mm "Super Grip" rubber flooring and 5 mm metal floor as additional reinforcement on the chamfer of the loading platform
* Control valves for the hydraulic ramps on the right and...

Inzerát bol automaticky preložený. Chyby v preklade sú možné.