Otvorený náves s plachtou

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, first axle lift (1. Achslift), lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding side curtain, sliding roof cover, toolbox, single owner, excellent condition.

Permissible kingpin load: 12,000 kg
Technically possible kingpin load: approx. 12,000 kg
Permissible axle load: 24,000 kg (8,000 kg per axle)
Technically possible axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Basic unladen weight: approx. 6,130 kg
Ppjdpjy Ifw Djfx Anrjr
Custom vehicle unladen weight: approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor loading capacity according to DIN EN 283 with test axle load of 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading area length, inside: approx. 13,620 mm
(G) Loading area width, inside: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
Tire size: 445/45R19.5
(H1) Loading height unladen in driving position horizontal: approx. 1,020 mm
(H2) Loading height laden in driving position horizontal: approx. 990 mm
(H3) Achievable ramp height at rear with coupling height 910 mm, laden, elevated: approx. 1,200 mm
Ride height set to 265 mm.
(K) Side through-loading height, inside: front approx. 2,735 mm – 2,860 mm [adjustable in 5x25 mm steps], rear approx. 2,810 – 2,860 mm [adjustable in 1x50 mm steps]
(K1) Height inside under roof: front approx. 2,875 mm – 3,000 mm [5x25 mm adjustable]; rear approx. 2,950 mm – 3,000 mm [1x50 mm adjustable]
(X1) Total unladen height in driving position horizontal: = H1 + K + T +/- superstructure height adjustment | = S + P + K + T +/- superstructure height adjustment
(X2) Total laden height in driving position horizontal: = H2 + K + T +/- superstructure height adjustment
Body adjustment: The “Mega” body design enables height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, side through-loading height, internal height) change according to the selected body setting.

(T) Roof construction height, side: approx. 180 mm. Due to the design of the roof chord, the internal loading height at pallet width matches the specified internal roof height.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing radius (according to ISO 1726): approx. 2,300 mm
(P) Build-up height above fifth wheel: approx. 90 mm
(S) Possible fifth wheel coupling height unladen: approx. 930 – 1,060 mm, level at approx. 930 mm (observe total height!)
Brake system according to ECE-R13
Electrical system according to ECE-R48
Wabco brakes, air suspension
BPW three-axle ECO Air assembly with 370 mm disc brakes, ET 120, 260 mm air suspension travel.
Tires: 6x 445/45 R 19.5
Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in direction of travel
VarioFix steel outer frame with 3 pairs of stanchion holders
Mechanical/hydraulic lifting device, lifting height from lowest position approx. 500 mm/600 mm, 4 operating levers at the corner stanchions. Complies with occupational safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!)
Cargo securing certificate according to EN 12642 XL (VDI 2700). For road transport only.
"Daimler Cargo Securing DL 9.5" certi

Inzerát bol automaticky preložený. Chyby v preklade sú možné.