Otvorený náves s plachtou

KRONE MegaLiner*BPW*Edscha*hydr. Hubdach 450 mm

DUO-Matic air coupling
Fifth wheel load: 12,000 kg
Axle load: 24,000 kg
Gross permissible weight: 36,000 kg
Technically possible: Axle load: 27,000 kg
Gross permissible weight: 39,000 kg
Unladen coupling height: 950 mm
Double-T longitudinal and central beams as well as outer frame
welded with cross members and outriggers
Multilock outer frame with universal load securing options every 100 mm
Front construction height: 82 mm (incl. floor and fifth wheel plate)
2" king pin (corner dimension: 2,040 mm)
Underrun protection according to EC with round tube, suitable for RoRo transport
Side protection device according to EC directive
For load space length: 13,620 mm int.
For load space width: 2,480 mm int.
Piggyback version consisting of 4 gripping edges
(color-coded), fixed underrun protection with round tube
Fixed side impact protection left and right (for rail transport,
no need for folding-up!)
10 pairs of stake pockets 81 x 81 mm in the outer frame, as well as
10 stake pockets 81 x 81 mm centrally in the floor
The first two sets of 3 pockets (neck area) have a
stake pocket depth of only 68 - 85 mm (immersion depth not sufficient for use,
stakes may jump out during use!)
4 pairs of lashing rings according to PREN 29367-2
Rear sliding step ladder
Stainless steel toolbox, left
3 axles each with 9,000 kg load capacity
Aggregate spacing = 7,650 mm
Track width: 1,965 mm
Wheelbase: 1,310 / 1,310 mm
BPW unit with air suspension, total lift 200 mm
Brake drums, 360 x 200 mm (for 19.5" rims), BPW
with raise and lower device, 1 valve
BPW unit with split air suspension bellows with centering
Tyres (rims) 6-bolt, 445/45 R 19.5
Type: BO 13620, 30 mm thick, water-resistant, bonded floor panels,
cut edges sealed all round, strength according to DIN 283,
for floor loads up to 7,000 kg forklift axle load
Curtain side frame type: AB 13620 AGG, dimensions 13,620 mm int. length x int. width as per stakes
LM universal outer rails, full length, for accommodating
sliding tarp and sliding rings
Edscha sliding roof (175) with plastic joints
Construction height 175 mm, slope 0 mm, designed for
the transport of mesh box pallets according to DIN 15155
Height int. lower edge outer rail front: 2,860 mm
Bwjdeyra Rfspfx Ahwsi
Height int. lower edge outer rail rear: 2,860 mm
Internal height: 3,000 mm int.
Through-loading height at rear portal: 2,845 mm
Unladen overall vehicle height at highest point approx. 4,067 mm
(at the above-mentioned unladen coupling height)
The permissible total vehicle height of 4,000 mm is exceeded!
The permissible total vehicle height of 4,000 mm is exceeded!
A warning sticker "Take care high Trailer" (DIN A4) is to be affixed to the front wall.
Overall vehicle height at the highest point with air suspension deflated max. 4,000 mm in pocket wagon operation.

WARNING:
Rail transport is only permissible with the lateral heights specified in the construction description
for the rail-approved int. lower edge of the outer rail at front
and rear! The centre stakes must be correspondingly adjusted!
Only this travel position is permitted for rail transport!
Strict attention must be paid!
Rail approval Code XL
(for rail transport over 120 km/h up to 140 km/h)

Hydraulic lifting roof with 450 mm total lift,
can be raised separately at 4 corner stanchions
Superstructure height at front can be lowered from uppermost travel height (basic position)
by 120 mm (in one stage), reduced roof lift: 330 mm
Superstructure height at rear can be lowered from uppermost travel height (basic po

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.