Pracovná plošinová náves

KÖGEL Multi Chassis, verstärkt, Bordwände

You can find our complete range of vehicles, including those available immediately and at short notice, on our website.

Excerpt from the equipment list. Full specification available on request.

Chassis:
* Standard ladder-type frame in lightweight steel construction with continuous cross members
* Chassis frame with camber
* Coupling plate approx. 8 mm thick, equipped with a 2-inch kingpin according to DIN 74080 / ISO 337

Running Gear:
* Axle lift mechanism on axle 1
* Fully automatic, load-dependent axle lift control. Starting aid: Activation via braking three times, 30% overloading permitted up to a speed of 25 km/h
* Axle set by choice of brand (Kögel) – three-axle cluster, with 430 mm disc brakes, approx. 120 mm offset. Air suspension with approx. 180 mm stroke

Tyres:
* Six 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L) tyres

Chassis Attachments:
* Landing legs (make of choice from Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-sided operation on the right in driving direction
* Spray suppression system in accordance with Regulation (EU) No. 109/2011 for three-axle assemblies with 385/65 R22.5 tyres, comprising 1 pair of quarter-circle mudguards in front of the axles, 1 pair of straight mudguards with spray flaps between the 1st and 2nd axles, and 1 pair of quarter-circle mudguards with spray flaps behind the axles
* 2 wheel chocks with holders
Duodjyh S I Eepfx Ag Ten
* Standard sideguards omitted
* Storage box for stowing 10 side boards, drop-in posts, and rear door(s) or flap; all-round closed, splash-proof, also serves as side guard
* Ground clearance (front) approx. 220 mm
* 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm; fitted at the rear, one left and one right
* Ladder omitted
* High, rigid steel underrun guard at the rear according to ECE-R58
* One pair each front and rear of extendable marker boards for oversize loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (no connecting lines), parking brake as spring-loaded brake, external pneumatic couplings and EBS diagnostic connector via ISO 7638 plug
* EBS system (brand according to manufacturer’s choice)
* Air suspension system including one lift/lower valve, mounted on the left behind the axle cluster, automatic ride height adjustment
* 2 fool-proof coupling heads at the front, ISO 1728
* Air tanks for braking system and air reservoir made of steel (EN 286-2)

Floor:
* Floor panels approx. 30 mm thick
* Floor sealed all round
* Pocket strips for square drop-in posts approx. 80 x 80 mm, arrangement according to drawing J9: 8 post strips (18 pockets per strip: 4 outside, 10 centre)

Bodywork:
* Complies with body stability standard EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg

Front Wall:
* Storage for max. 20 square drop-in posts approx. 80 x 80 mm (length approx. 1,990 mm) inside front wall
* Front wall approx. 2,000 mm high with volume corner posts in steel, profiled steel sheet, bolted/riveted to frame
* 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640

Rear Wall:
* Folding rear wall approx. 600 mm, made of aluminium hollow profiles with 3 tie rods and T-shaped ri

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.