Rozmetadlo na nakladanie s žeriavom

Bollhalder / Elme

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: Ijdpfjhlz R Ssx Ag Tstd - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel - Gooseneck + king pin plate 225 mm - Lowbed designed for point load of 25 t over 5 m - Outer frame closed to the outside with welded lashing rings for securing cargo - Interchangeable 2" king pin - Rear hanging track for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steering via fifth wheel coupling Floor: - Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment) - 6 pairs of mushroom lashing points in the outer frame lowbed - Storage compartment with lid in the lowbed floor front left and right Front Wall: - 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device Curtain Sides: - Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel - Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension to the driving direction: 300 mm, in height: 750 mm - With eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking - With strap pockets Rear Wall: - Steel tail portal frame with side curtain retaining bracket - Aluminum double-wing door, 25 mm thick - Both door wings fully folding with door retainers - Each door wing with one double hinge and two recessed grip pockets Front Corner Posts: - At roof height, bolted to the front end Center Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length by means of rollers Isdpfxeiu Eu Ne Ag Tetd - Center posts in lowbed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area) - Rear portal crossbar can be swivelled away - PVC tarpaulin roof without customs closure - Manual hydraulic lifting roof on both sides, lift 450 mm - Retractable roof can be operated in front (9x50) and rear (9x50) raised positions - Including curtain extension and curtain tail at the rear - Roof canopy at the very front of the front wall, each extendable by 900 mm with crank Accessories: - Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm - Storage for 4 warning signs inside front wall, top right and left - 1 aluminum ladder with holder, 2,500 mm long, at the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR sign on the rear wall - Central lubrication system BEKAMAX with pump and grease

Stav: nový, maximálna hmotnosť nákladu: 29 000 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 880 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 800 mm, celková šírka: 2 550 mm, celková výška: 800 mm, Výbava: ABS, Tento príves bude k dispozícii v Holandsku koncom decembra. Má rázvor náprav, ktorý je veľmi vhodný na jazdu v Holandsku aj v Nemecku, v súlade s paragrafom 70 v Nemecku. Nápravy: posledná náprava je vlečená, prvá náprava je zdvíhateľná. Itedpfemnpc Dsx Ag Ted Rázvor 7900 mm, king pin na 2. náprave. Platforma 8800 mm, celková dĺžka 13 000 mm, výsuvná o 6000 mm (celková dĺžka 19 000 mm), výška podlahy 800 mm. Príves je kompletný a lakovaný 2K lakom. Výška otočného taniera (king pin plate) 1150 mm. Kompletné LED osvetlenie Aspöck, brzdový systém WABCO. Pozinkované palety, šírkové osvetlenie a označenia vyhovujú aj belgickým predpisom. Úložný box, 4x prídavné pracovné osvetlenie, farba RAL 5002. Príves môže byť dodaný s holandským evidenčným číslom alebo s CoC dokumentmi (Certifikát konformity).

Stav: použitý, pohotovostná hmotnosť: 4 100 kg, maximálna hmotnosť nákladu: 13 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2000, ďalšia kontrola (TÜV): 11/2024, zavesenie: vzduch, veľkosť pneumatiky: 315/80R22.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, twin tires, stanchions Structure: Doll trailing dolly for long timber transport, 2x BPW axles, drum brakes, with remote cable control! Itsdpfxoufi Eij Ag Ted Matching tractor unit with loading crane MAN TGS 26.540 6x4 BL available under -87583-! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!