Príves na klády

Doll M135 Nachläufer

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long Lhjdpfjhlz R Ssx Ag Tjd - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel - Gooseneck + king pin plate 225 mm - Lowbed designed for point load of 25 t over 5 m - Outer frame closed to the outside with welded lashing rings for securing cargo - Interchangeable 2" king pin - Rear hanging track for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steering via fifth wheel coupling Floor: - Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment) - 6 pairs of mushroom lashing points in the outer frame lowbed - Storage compartment with lid in the lowbed floor front left and right Front Wall: - 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device Curtain Sides: - Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel - Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension to the driving direction: 300 mm, in height: 750 mm - With eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking - With strap pockets Rear Wall: - Steel tail portal frame with side curtain retaining bracket - Aluminum double-wing door, 25 mm thick - Both door wings fully folding with door retainers - Each door wing with one double hinge and two recessed grip pockets Front Corner Posts: - At roof height, bolted to the front end Center Posts: - 3 pairs of infinitely adjustable folding posts Lhedpfx Asiu Eu Neg Ted - Posts are movable along the entire length by means of rollers - Center posts in lowbed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area) - Rear portal crossbar can be swivelled away - PVC tarpaulin roof without customs closure - Manual hydraulic lifting roof on both sides, lift 450 mm - Retractable roof can be operated in front (9x50) and rear (9x50) raised positions - Including curtain extension and curtain tail at the rear - Roof canopy at the very front of the front wall, each extendable by 900 mm with crank Accessories: - Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm - Storage for 4 warning signs inside front wall, top right and left - 1 aluminum ladder with holder, 2,500 mm long, at the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR sign on the rear wall - Central lubrication system BEKAMAX with pump and grease

Stav: nový, maximálna hmotnosť nákladu: 29 000 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 880 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 800 mm, celková šírka: 2 550 mm, celková výška: 800 mm, Výbava: ABS, Tento príves bude k dispozícii v Holandsku koncom decembra. Má rázvor náprav, ktorý je veľmi vhodný na jazdu v Holandsku aj v Nemecku, v súlade s paragrafom 70 v Nemecku. Lodpsmnpc Defx Ag Tjhd Nápravy: posledná náprava je vlečená, prvá náprava je zdvíhateľná. Rázvor 7900 mm, king pin na 2. náprave. Platforma 8800 mm, celková dĺžka 13 000 mm, výsuvná o 6000 mm (celková dĺžka 19 000 mm), výška podlahy 800 mm. Príves je kompletný a lakovaný 2K lakom. Výška otočného taniera (king pin plate) 1150 mm. Kompletné LED osvetlenie Aspöck, brzdový systém WABCO. Pozinkované palety, šírkové osvetlenie a označenia vyhovujú aj belgickým predpisom. Úložný box, 4x prídavné pracovné osvetlenie, farba RAL 5002. Príves môže byť dodaný s holandským evidenčným číslom alebo s CoC dokumentmi (Certifikát konformity).

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Rok výroby: 2022, nosnosť: 40 000 kg, S týmto spreaderom (Elme) je možné nakladať návesy pomocou žeriavu (kolesový žeriav alebo portálový žeriav). Spreader je nový a bol použitý iba na skúšobné nakladanie. Je možné manipulovať s nákladmi do 40 t. Lhodpfx Asycwaxog Tjd