Štandard-SZM

Volvo FH 500 6x2/4 I-Save + Full Air

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer Gbsdpfx Abehlz R Sjlek - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: použitý, najazdené kilometre: 1 114 000 km, prvá registrácia: 06/2012, celková hmotnosť: 18 000 kg, typ prevodu: poloautomatický, emisná trieda: Euro 5, Zavesenie: vzduchové Gbedpsym R Ahsfx Ablsk