Sklápací návesSTAS
OP 10.60 48m³
Sklápací náves
STAS
OP 10.60 48m³
pevná cena bez DPH
10 870 €
(12 935 € brutto)
Stav
Použitý
Umiestnenie
Korschenbroich-Glehn 

Zobraziť obrázky
Zobraziť mapu
Základné údaje
Cena a lokalita
pevná cena bez DPH
10 870 €
(12 935 € brutto)
- Umiestnenie predajcu:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Nemecko

Volať
Technické detaily
- Konfigurácia náprav:
- 3 nápravy
- Prvá registrácia:
- 07/2000
- Dĺžka ložného priestoru:
- 10 000 mm
- Šírka ložného priestoru:
- 2 480 mm
- Výška ložného priestoru:
- 1 900 mm
- Objem nakladacieho priestoru:
- 48 m³
Podrobnosti ponuky
- ID záznamu:
- A207-22-547
- Referenčné č.:
- 2560
- Naposledy aktualizované:
- dňa 12.12.2025
Popis
TÜV new!
Chassis
In aluminium
Two fully automatically welded I-section longitudinal beams with welded crossmembers.
Chassis width: 1,200 mm
Axles and Suspension, Drum Brake
BPW/SAF axle assemblies 3 x 9 t with air suspension; air bellows centrally positioned along the chassis longitudinal beams; lift axle with start assist, load pressure gauge, raise-lower valve.
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5, approx. 30–50% tread remaining; 11.75 x 22.5 ET 0 aluminium rims.
King Pin
2" – bolted into a 10 mm thick plate.
Landing Legs
Mechanical version with single-side operation, 2-speed.
For air suspension we use Jost Modul.
Fjdpfex Ep Nxex Ah Nspr
Brake System
According to E.G. standard; two-line Wabco system; spring-loaded parking brake on two axles; Wabco EBS-D system; ALU air tank.
Electrical System
According to StVZO guidelines, with two five-chamber lamps by Aspöck; 24 Volt system with a second socket for special operations; tail lights in LED version; 3x separate reverse lights.
Tipping Body / Tipper Body
Aluminium tipper body; side walls of 30 mm thick plank profiles (2–3 mm) fully welded; approx. 8 mm thick wear-resistant alloy floor; 4 mm reinforced straight front wall; rear wall is a pendulum tailgate with LL-seal in slanted design with a central grain slider; pendulum tailgate with pneumatic operation; upper mounted doors; fold-down side walls on the left and removable extension board at the rear.
Hydraulics – Tipping Cylinder is new
Hydraulic cylinder mounted on the front wall; operating pressure 135 bar; brand: Edbro 18, with approx. 2 m hose and loose 1" half connector.
Accessories
6 PVC mudguards; spare wheel bracket; side underrun protection; toolbox; 3 m aluminium ladder; aluminium swing bar tarpaulin with rolling system and catwalk on the body; side tarpaulin closure with tension belts; 2 aluminium swing bars; foldable aluminium underrun guard; separate discharge spout with side-mount tarpaulin sack holder on the frame; holders for shovel, broom and scraper, etc.
Offer and images non-binding.
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Chassis
In aluminium
Two fully automatically welded I-section longitudinal beams with welded crossmembers.
Chassis width: 1,200 mm
Axles and Suspension, Drum Brake
BPW/SAF axle assemblies 3 x 9 t with air suspension; air bellows centrally positioned along the chassis longitudinal beams; lift axle with start assist, load pressure gauge, raise-lower valve.
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5, approx. 30–50% tread remaining; 11.75 x 22.5 ET 0 aluminium rims.
King Pin
2" – bolted into a 10 mm thick plate.
Landing Legs
Mechanical version with single-side operation, 2-speed.
For air suspension we use Jost Modul.
Fjdpfex Ep Nxex Ah Nspr
Brake System
According to E.G. standard; two-line Wabco system; spring-loaded parking brake on two axles; Wabco EBS-D system; ALU air tank.
Electrical System
According to StVZO guidelines, with two five-chamber lamps by Aspöck; 24 Volt system with a second socket for special operations; tail lights in LED version; 3x separate reverse lights.
Tipping Body / Tipper Body
Aluminium tipper body; side walls of 30 mm thick plank profiles (2–3 mm) fully welded; approx. 8 mm thick wear-resistant alloy floor; 4 mm reinforced straight front wall; rear wall is a pendulum tailgate with LL-seal in slanted design with a central grain slider; pendulum tailgate with pneumatic operation; upper mounted doors; fold-down side walls on the left and removable extension board at the rear.
Hydraulics – Tipping Cylinder is new
Hydraulic cylinder mounted on the front wall; operating pressure 135 bar; brand: Edbro 18, with approx. 2 m hose and loose 1" half connector.
Accessories
6 PVC mudguards; spare wheel bracket; side underrun protection; toolbox; 3 m aluminium ladder; aluminium swing bar tarpaulin with rolling system and catwalk on the body; side tarpaulin closure with tension belts; 2 aluminium swing bars; foldable aluminium underrun guard; separate discharge spout with side-mount tarpaulin sack holder on the frame; holders for shovel, broom and scraper, etc.
Offer and images non-binding.
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrované od: 2002
Odoslať žiadosť
Telefón & Fax
+49 2182 ... inzercie
Váš inzerát bol úspešne odstránený
Došlo k chybe




















