Nákladné vozidlo na špeciálne účely

VOLVO FH500 6x4 Fassi F545RA 2.27 mit Jib und Winde

Stav: nový, výkon: 375 kW (509,86 k), celková hmotnosť: 26 000 kg, typ paliva: nafta, farba: biely, konfigurácia náprav: 3 nápravy, brzdy: retardér, typ prevodu: automatický, šírka ložného priestoru: 2 470 mm, dĺžka ložného priestoru: 4 250 mm, Rok výroby: 2025, celková šírka: 2 550 mm, celková výška: 4 000 mm, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, navigačný systém, nezávislé kúrenie, pohon všetkých kolies, sadzový filter, žeriav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A: tandem axle, single reduction, hypoid type. Differential locks longitudinal and transverse. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 l aluminum tank, right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling for 50 mm diameter towing eyes Electrical trailer connection, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable rear-view mirrors, wide-angle mirrors both sides, kerb-view mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight leveling Daytime running lights LED, "V-light" LED front fog lights Static LED cornering light Two LED rotating beacons (orange), fitted on front of cab roof Cab roof feedthrough both sides Wiring for roof-mounted headlights, max 280 W 2 air horns on roof, controlled from steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Badges/type designation factory-fitted Emission type plate (Euro...) L-plate (low-noise vehicles -96) Bljdpfx Asx A Nn Tjhxor Flatbed version as steel/welded construction, permanently mounted, low-build type. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards by Suer, height 600 mm, anodized design per side (R and L) Flush-mount lashing rings 2500 daN and 6500 daN per side, in slotted rails for flexible arrangement 6 stake pockets for stakes (3 per side) Hydraulic extension of flatbed by approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and collision guard, as low as possible, radio remote controlled Sturdy headboard consisting of welded frame with recessed stake depot pockets Cladding panels, mudguards in checker plate design, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with checker plate finish 5 pc. toolboxes, checker plate natural, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated, painted in vehicle color Rear underrun guard and auxiliary support installed, including installation of all hydraulic and electrical connections (duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-line operation with foldable pulley and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle boom system with PROLINK (over-bending knuckle boom up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure limiting and load-holding valves XF system (extra fast) + XP system (extra power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied with piping Separate hydraulic tank (180l) with filter

Stav: nový, výkon: 375 kW (509,86 k), celková hmotnosť: 26 000 kg, typ paliva: nafta, farba: biely, konfigurácia náprav: 3 nápravy, brzdy: retardér, typ prevodu: automatický, šírka ložného priestoru: 2 470 mm, dĺžka ložného priestoru: 4 250 mm, Rok výroby: 2025, celková šírka: 2 550 mm, celková výška: 4 000 mm, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, navigačný systém, nezávislé kúrenie, pohon všetkých kolies, sadzový filter, žeriav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib plus winch Liftable drive axle Liftable axle Drive axle RTS2370A. Tandem axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Maximum front axle load (technical): 10.0 t Maximum rear axle load (technical): 21 t Volvo Dynamic Steering (VDS) Bjdpsx A Nntofx Ahxelr 330 L aluminum tank on the right side AdBlue tank usable capacity: 64 liters Trailer coupling Rockinger 50, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, stage E - onboard diagnosis Cab color: Signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on the passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and dipped beam Automatic headlight leveling Daytime running lights LED, “V-light” LED front fog lights Static LED cornering lights Two LED revolving beacons (orange) mounted on front of cab roof Cab roof pass-throughs on both sides. Wiring for roof-mounted lighting, max 280 W 2 air horns on the roof, operated from steering wheel. Roof antenna and CB radio prep Roof bar for accessories, front Emblems/type designation factory-mounted. Emissions type plate (Euro...) ‘L’ plate (low noise vehicles -96) Drop-side body as steel/welded construction, fixed-mounted, low-profile design. Approx. 4800 mm long, approx. 2480 mm wide Removable aluminum drop sides, make: Suer, height 600 mm, anodized finish on both sides (R and L) Recessed lashing rings: 2500 daN and 6500 daN per side, in perforated rail with flexible positioning 6 stake pockets for stanchions (3 per side) Hydraulic extension of platform up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underride protection, as low as possible, operated by remote control Sturdy front wall consisting of welded frame with recessed stanchion depot pockets Cover plates, fenders made of checker plate, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with checker plate 5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and location depend on wheelbase and available space conditions. Sandblasted, powder-coated, and vehicle color painted. Installation of rear underrun protection and supplementary support, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-line operation with foldable pulley and accessories. Endless slewing range All hydraulic cylinders double acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shutoff as well as visual alarm (90% and 100%) Pressure limiting and load holding valves XF System (Extra Fast) + XP System (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in display Danfoss D850 valve block with 4 control valves mounted on the crane column Emergency crane operation High-pressure filter supplied piped Separate hydraulic tank (180 l) with filter