Otvorený náves s plachtou

KÖGEL 3-Achs-Cargo-Coil-Pritschensattelanhänger

Equipment extract

Chassis | 10500.190
- Coil trough, internal length approx. 9,000 mm (design according to VDI guideline 2700) for accommodating coils with a diameter from a minimum of 900 mm to a maximum of 2,100 mm.

Running gear | 17160.010
- Axle lift mechanism on axle 1 | 18330.271
- Three-axle SAF INTRADISC axle unit with disc brakes, diameter approx. 430 mm, offset 120. Air suspension with approx. 180 mm stroke.

Vehicle Tyres | 20540.007
- Tyres: 6 x 385/65 R 22.5, 160J – brand of our choice
- 20865.005: 6 steel rims, size 22.5 x 11.75, offset approx. 120 mm (ET 120).

Brake / Air Suspension System
- 32110.057: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic couplings and EBS diagnostic connection via ISO 7638 socket.
- 32125.015: WABCO EBS system
- 33420.040: Air suspension including 1 lifting and lowering valve, mounted left in the direction of travel behind the axle unit. Driving position sets automatically.

Floor | 27380.144
- Mounted both sides: pallet stop strips made of steel with VarioFix hole pattern (bolted), on the left and right in direction of travel, for width i.L. approx. 2,468 mm (internal loading height under outer rail is reduced by approx. 20 mm).
- 40510.140: Board floor approx. 30 mm thick, plywood, multiply glued, recess in coil well area. Coil trough side walls lined with plywood, approx. 18 mm thick.
- 40513.020: Perimeter-sealed floor
- 40525.020: 20 complete coil tread covers made of wood, board floor approx. 27 mm thick
- 40542.011: Stake pockets for square tube stanchions approx. 80 x 80 mm, arrangement as per drawing A2: 2 pairs on the longitudinal beam in 1st and 2nd position, 8 pairs on the outer frame.
- 40551.108: 8 pairs of stake pockets in the coil trough for square tube insert stanchions approx. 80x80 mm. Arrangement: 1st pair at the front of the trough, 2nd-7th pair as per production drawing, 8th pair at the end of the trough.

Superstructure
Dcedpfxexvgqlj Adljp
- 46538.010: Meets body strength standard EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg.

Front wall
- 41510.125: Front wall at superstructure height with bulkhead corner stanchions made of aluminium, aluminium hollow profiles riveted, screwed/riveted to frame, 1 pair of lashing rings according to EN 12640.
- 41570.050: Interior of the front wall reinforced with approx. 12 mm plywood with phenolic resin film surface, approx. 1,250 mm high.

Rear wall
- 42400.563: Double-wing rear portal door made of aluminium, approx. 2,630 mm internal length
- 42505.040: 4 integrated locking rods (2 left, 2 right)
- 42540.256: Bolted corner stanchions at rear made of steel to portal height with additional impact protection up to the 1st door hinge.
- 42545.020: Corner stanchions on both sides can be mechanically folded out sideways by approx. 500 mm for loading and unloading. Operation requires sliding the roof forward and opening the rear doors.
- 42548.005: 5 pairs of slots for load securing on rear corner stanchions

Side wall
- 43500.300: 3 pairs of KÖGEL sliding stanchions with receptacle approx. 600 mm high for 5 drop-in slats stacked above each other from the upper edge of the floor. Firmly fixed to the outer frame.
- 43501.005: 5 rows of slat receptacles consisting of plug-in slat pockets on the sliding stanchions and variable supports in the corner stanchions.
- 43525.016: Variable support as spacer for dr

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.