Pracovná plošinová náves

SCHWARZMÜLLER 3-A Plateau BPW Lift Steckrungen Hartholz PalKis

SCHWARZMÜLLER 3-Axle Construction Material Flatbed Semi-Trailer RH125
REINFORCED CHASSIS 20t/4m!!!
FIRST REGISTRATION!!
German trailer, first owner, TOP CONDITION
Internal length approx. 13,620 mm
Internal width approx. 2,480 mm
Loading height front approx. 1,240 mm
Loading height rear approx. 1,210 mm
Welded steel frame construction
Reinforced for 20 t point load over 4 m loading length
Frame height front approx. 140 mm
Longitudinal beams reinforced with lower flange in the neck area
(Can be loaded/disconnected)
Coupling height 1090–1190 mm
Reinforced outer frame with holes, 5 mm thickness, 100 mm pitch, elongated holes 40/25 mm, plus 12 pairs of 4 t lashing rings, recessed in the frame profile
SCHWARZMÜLLER socket post load securing system "RuLasi"
6 plug-in crossbeams for square tube stanchions 80x80 mm,
across the full width (except at the longitudinal beams), with mid-braces for belt attachment,
spacing from front wall: 500/2550/4430/7200/9830/12870 mm
Storage for 80x80 mm stanchions directly inside front wall, across entire width (except at longitudinal beams), hot-dip galvanized, holds 15 stanchions
6 steel square tube boundary stakes 80x80x5 mm, usable height approx. 2,000 mm, top with lashing holes for strap, hot-dip galvanized, stake lock with push button
6 steel square tube boundary stakes 80x80x5 mm, usable height approx. 1,000 mm, top with lashing holes for strap, hot-dip galvanized, stake lock with push button
Mechanical steel landing gears, 2 x 12 t with thrust compensation
BPW EcoDisc axles, disc brakes Ø430 mm (22.5" disc), axle load 9 t/axle, Onroad version
Axle spacing 1,310 + 1,310 mm
Wheelbase 7,620 mm
Axle lift on 1st axle, lifts and lowers automatically depending on weight
6x Tires 385/65 R 22.5, 160K, MICHELIN X Multi T
Steel rims 11.75 x 22.5, offset 120 mm, silver
Plastic wheel nut covers
Braking system according to EC Directive 71/320 ECE R13
Two-line compressed air brake system
Wabco braking system
EBS system 2S2M, one axle with sensor
RSS - Stability Program
Steel air tanks
Brake/air connections with 2 single coupling heads yellow/red
Air suspension with lift and lower function, total lift approx. 200 mm
Automatic level control to programmed ride height from 15 km/h
Axle load display via EBS CAN bus signal for in-cab display
Larch wood floor 40 mm, longitudinally laid, impregnated on both sides, with steel hat profile rails over longitudinal beams and anti-slip plywood base, floor load capacity 7000 kg forklift axle load
Aluminum hollow-profile front wall approx. 2,400 mm high
Front wall inside with 2 lashing rings for load securing
Front wall reinforced with 4 vertical supports to top
Front wall interior protection 9 mm phenol resin coated plywood
Lsdpfxsxquqps Abyoru
Holder for squared timbers (2 L-angles for stacking ten 100x100 mm squared timbers 2,300 mm wide)
Bolted steel corner posts front
24-volt lighting system according to EC Directive 76/756/EEC
Partial LED five-chamber rear lights "Europoint III"
8x LED side marker lights
2 additional LED reversing lights
Steel shot blasting, 2-coat zinc phosphate primer
Chassis = RAL 7021 black grey
Outer frame + end plates = RAL 7021 black grey
Corner posts + front wall + pallet box lid = RAL 9010 pure white
Contour marking strips according to ECE 48
Plastic single-wheel fenders with spray protection
Access ladder rear right
Delta rubber impact buffer +

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.