Náves

Wiese Baustoffauflieger - Heckkran Kran Fassi

Wiese construction material semi-trailer
Weights:
Kingpin load: 12,000 kg
Axle load: 27,000 kg
Permissible total weight: 39,000 kg
Tare weight: 10,840 kg
Length
Loading area length: approx. 9,200 mm
Overall length: approx. 10,600 mm
Width
Internal width: 2,480 mm
Overall width: 2,550 mm
Kingpin
1 position with 2" kingpin
Coupling height
Approx. 1,160 mm in horizontal position
Top of main beam (without floor): approx. 1,380 mm
Load height:
Approx. 1,410 mm
Lashing hole - outer frame D=30 mm with perforated lashing strip on the slanted edge
(160 mm high / 30 mm floor recess / 4 mm wall thickness)
Main beam spacing
980 mm (center/center) – 1,130 mm (outer/outer)
Axles
3 axles, each with 9,000 kg load capacity
Make: SAF with disc brake D=430 mm
Track width: 2,040 mm
ABS: 1 axle with wheel speed sensor
Axle distances: approx. 1,510 mm / approx. 1,510 mm
Suspension
Original SAF air suspension with lift-lower valve and safety cables
Axle lift
Axle lift for 1st axle, automatic load-dependent starting aid
Switchable via push-button in cab
Steering
Mechanical forced steering on axles 2 + 3
Double rod steering / manufacturer: Tridec
Braking system
2-line Wabco compressed air braking system in accordance with EU Directive 71/320/EEC ff. with:
EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket
1x ISO coupling head yellow
1x ISO coupling head red
Djdpsw Tgcwofx Agcjcn
Spring-loaded parking brake on 2 axles
All connections with quick release couplings
Aluminum air reservoirs
Air system
Compressed air installation with:
1x raise/lower valve
1x level control valve
Aluminum air reservoirs
All connections with quick release couplings
Automatic lowering of air suspension during crane operation
Tyres
6 units type: 385/65 R22.5"
Brand: as per manufacturer selection
Tyre pressure monitoring system for 6 tyres, with in-cab display
Rims
6x steel rims 11.75x22.5", 10-hole, hub-centric, offset: 120 mm
Support equipment
Mechanical landing legs with T-pendulum foot, permissible lift: 2x 12,000 kg
Operable from one side, 2 speeds
Brand: as per manufacturer selection
Wheel covers & mudflaps
6x plastic half-shell wheel covers
Mudguard mounting reinforced with strip steel
Note: Mudguards on steered axle 3 with inner cut-out
Lighting
24V lighting system per EU Directive 76/756/EEC ff. with:
2x multi-chamber lights
Lane marker lights
Number plate illumination
LED side marker lamps with indicator function
2x 7-pin and 1x 15-pin socket, installed as per EU standard
Tail lights mounted in reinforced lamp carrier = certified rear underrun protection
All required markings
Additional installation:
Crane control electrical interface prepared as per specifications!
Safety equipment
Side impact protection and rear underrun protection made of aluminium per EU guidelines
Floor
OKULEN floor 32 mm
Body
Straight front wall, 1,200 mm high, fixed weldment, made from 4x steel profiles,
Welded to front plate with aluminium hollow profile infill
Inside with 625 mm high wear plate, galvanized steel
Both sides with Kinnegrip side stanchions K20/1,100 mm high for full through-loading
Straight rear wall, 1,100 mm high, fixed weldment, made from 4x steel profiles,
Welded to rear plate with aluminium hollow profile infill
Inside with 625 mm high wear plate, galvanized steel
Both sides with Kinnegrip side stanchions K20/1,100 mm high for full through-loading
2x3 aluminium drop sides 1,100 mm, folding and lowerable
Rear side panels with fold-out steps (left and right) for access and grab handles

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.