Otvorený náves s plachtou

SCHMITZ CARGOBULL SCS24 DOPPELSTOCK HUBDACH Lift SAF 455/40R22,5

SCHMITZ Cargobull SCS 24/L - 13.62 E B DOUBLE-DECK with beams

GERMAN TRAILER, 1st owner!

Dimensions:
- Body length: 13.62 m
- Body width: 2.48 m
- Body height front: 3.00 m
- Body height rear: 3.00 m
- Internal height front: 2.81 m
- Internal height rear: 2.81 m
- Fifth wheel height: 950 mm
- Ride height: 230 mm
- Wheelbase: 7.7 m
- Tyre size: 455/45R22.5
- Rear door width: 2.48 m
- Gross weight (perm. / tech.): 36 / 39 t
- Payload (perm. / tech.): 28.5 / 31.5 t
- Axle load (perm. / tech.): 24 / 27 t

Equipment:
- 2 marking boards 565x200 ECE-R70
- Foldable ADR/GGVS plate
- Foldable night parking board
- “MODULOS” bolted chassis
- Main beam height front: 125 mm, rear: 396+28 mm
- Outer frame with curtain hook edge and 3+2 pairs of upright pockets
- Multilock outer frame SCS
- Bolt-on underrun protection as per RL 70/221/EWG
- King pin: 2" to SAE standard, 1 position – 1690 mm
- Spare wheel carrier for 1 spare wheel incl. spare wheel
- Electrically operated lift axle with starting aid
- ROTOS SAF running gear system (disc brakes 430 mm)
- Axle: SAF SKRB9022K/M2,SP2040,FM1300,SK1000 ET 120
- Analog hubodometer, centre right
- CARGOBULL air suspension type “MRH2-KM35” with steel pistons, 350 mm bellows
- Two-line compressed air braking system with DUOMATIC coupling as per RR EG 71/320
- EBS 2S/2M electronic braking system with RSP
- EBS power supply via ISO 7638 + CAN
- Double diaphragm spring brake cylinder
- Lifting & lowering device with AUTO-RESET function
- 2 wheel chocks with holders
- Landing gear “JOST” with half-moon foot and plate
- Landing gear position for 32° swing clearance, turning radius 1900 mm
- Lighting: 24 volt as per RL 76/756/EWG, LED rear lights
- Continuous lamp carrier, white, with "SCHMITZ" embossing
- 1 socket acc. DIN ISO12098 24 volt
- LED side marker reflectors
- 1 pair lane marker lights
- Reversing spotlight 70 watt
- 6 x 455/45R22.5 (11.75x22.5)
- Steel rims ET 120
- Black wheel nut covers (3-axle)
- Straight plastic mudguards
- Plastic mudguards
- 13 pairs tie-down rings in outer frame, 2000 kg tensile strength, per EN 12640
- Pallet box for 24 Euro pallets, flat version
- 2 corner collision buffers, roller type
- Rear crosswise rubber collision buffer
- Light and brake connector holder at front bulkhead approx. 900 mm high
- Ladder holder on side of main beam
- 1 extendable rear access ladder
- Aluminium bulkhead full height, inside 750 mm high steel plate, steel corner posts
- 2 fire extinguisher holders on front wall
- 3 pairs reinforced Schmitz hinge stanchions
- 2 steel corner posts at rear for Schmitz sliding curtain with integrated tensioner
- 1 ALU double-hinged door full height, two internal locking rods (side)
- 28 mm composite floor, max. 7100 kg forklift axle load, strength tested to DIN EN 283
- 400 mm wear plate on last floorboard
- SCB sliding roof, 180 mm construction height, 2480 mm internal width, end bow foldable
- Hydraulic lifting equipment
- Hydro pump behind the aggregate on the left
- 4 rows of 110 mm high ALU side boards SCS + DOUBLE-DECK BEAMS AND STANCHIONS
- Sliding curtains, 880 g/m², reinforced for load securing
- Short front curtain
- Sliding curtains with over-centre closures
- Front release mechanism for sliding curtain
- Roof curtain, colour: white
- Tensioning rope all-round with holder on front wall
- Chassis hot-dip galvanized
- Wheel hubs: black KTL coated
- Wheels painted in silver RAL 9006
- Landing gear black final coating
- Bulkhead anodized, steel corner posts g
Ljdewv Tw Ijpfx Ab Tsai

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.