Trojstranný sklápací nákladný automobil

MAN TGS 26:480 6x4 EURO5 ATLAS 240.2E-A4 3-S-Kipper

WhatsApp

MAN TGS 26.480 6x4 DF BL with SCHWARZMÜLLER 3-way tipper and demountable crane
ATLAS 240.2E-A4 with radio remote control
German vehicle, 1st owner

Configuration:
ZF 16-speed manual transmission with Intarder

Special features:
- Car phone antenna
- Driver’s comfort seat, air-sprung and heated, with lumbar support and shoulder adjustment
- Flame start system
- Transmission: 16-speed - Type: ZF 16S2310
- Fuel tank: Aluminium - 400 l diesel
- 60 l urea solution (AdBlue)
- Single-cylinder air compressor, 360 ccm, with Air Pressure Management (APM)
- Heated air dryer
- Retarder/Intarder
- External sun visor
- Radio
- 12V and 24V cab sockets
- Axle configuration: 6x4
- Approach/front-view mirror
- 24V/7-pin trailer socket
- ABS trailer socket
- Anti-slip regulation (ASR)
- Audio system: MAN Media Truck Advanced radio 12V, navigation system preparation
- Electrically adjustable and heated external mirrors, heated wide-angle mirror
- MAN-Tronic on-board computer
- Kerb mirror, right
- Rear axle differential lock
- Electronic brake system MAN Brakematic
- EURO 6 engine
- Suspension: leaf/air
- Electric windows
- Tinted windscreen
- Generator 28 V 80 A
- Automatic climate control
- Multifunction steering wheel
- Raised air intake
- Engine: 12.4 L - 353 kW diesel
- Engine compartment encapsulation
- Tinted rear side windows
- Comfort quality seat cover/upholstery
- Sunblind for side window and driver’s door
- Rear and front axle stabiliser
- Viscous fan
- Rotating beacons
- PTO NH/1C
- Intarder
- Construction vehicle step
- Rear axle differential lock
- Electronic brake system MAN Brakematic
- Cab: M (medium length)

ATLAS crane type 240.2E-A4:
- 1.93 m = 11.20 t
- 4.51 m = 4.78 t
- 6.41 m = 3.22 t
- 8.31 m = 2.4 t
Bwjdpfx Aowtkipodvsl
- 10.31 m = 1.88 t
- 12.31 m = 1.56 t
- 14.30 m = 1.26 t
- Radio remote control

Demounting console Palfinger
High seat with bracket for remote control

SCHWARZMÜLLER 3-way tipper body:
Dimensions:
- Internal length approx. 6,300 mm
- Internal width approx. 2,420 mm
- Total width 2,550 mm

Auxiliary frame:
- Continuous longitudinal members with tipping cylinder mounting and tipping arms
- Low body height approx. 440 mm
- Plug locking device for tipper body with cross protection
- Body support and sound insulation
- Reinforced subframe and end plate for Atlas 240.2E A4 crane, removable rear section
- Welding of the two supplied mounting plates for removable rear, no crane body

High-pressure hydraulic tipping system:
- 20 t tipping cylinder for 3-way tipping, with safety cable, tipping angle to rear approx. 40°
- Load-sensing pump installation
- Installation of oil tanks (from crane supplier)
- Pneumatic tipper valve with overpressure valve
- Pneumatic 3-way transfer valve for tipper/crane
- 2-line trailer tipping connection with DN16 couplings and 3-way valve

Tipper platform:
- Welded all-steel construction with 5 mm fine-grained stainless floor plate
- 10 pairs of swivelling lashing rings, distributed: first pair approx. 400 mm from front wall, approx. 600 mm apart (width between rings: 2,320 mm)
- Lashing bars with straps on both sides under the tipper
- Fixed front wall of 4 mm steel, approx. 980 mm high
- Driver cab protection grid with lashing rings can be fitted
- 2 steps on outer front wall (left) for cab access
- 2 steps on inner front wall (left)
- Continuous, one-piece side walls of reinforced aluminium hollow profile (60/4/3 mm), approx. 980 mm high

Inzerát bol automaticky preložený. Chyby v preklade sú možné.