Müller-Mitteltal 18 To, Luft, Seitliche Alu Wände, Rollplane kúpiť použité (29 266)

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: Cgodpfx Amsylfvmj Sot * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on truck side) * 15-pin electrical connector * LED lighting * Front landing gear * Rear foldable support legs (external) Cgjdpfx Amsl Th Dfe Set * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Front and rear pre-fittings for retrofitting 20" container locks * Bolted flat sheet metal bulkhead * Drop-down side walls made of trapezoidal profiled steel, split 1x in the middle * Slide-in steel rear wall between the ramps, storage holder inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - 4 lashing rings mounted on each side - * In each front and rear corner 1x 6.3 t lashing ring * Profifix lashing rail, centrally along longitudinal axis, with lashing capacity up to LC 3,000 daN * Various drilling options for 1.2 t lashing capability in the front and rear cross members * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side walls painted in a desired RAL color (no special or metallic paints); color can be changed up to approx. 6 weeks before completion * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle Csdpfxsx Ipbgs Am Sjgt * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer Csdpsx Ipb Hofx Am Ssgt * Side underrun protection * Rear swivel supports on the chassis frame * Mechanically adjustable warning sign assemblies front and rear * Closed plastic mudguards at the front axle and straight galvanized steel skirts at the rear axle, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with integrated lashing options * Load securing package consisting of: 2 lashing rings (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant swivelable and lowerable lashing rings—loadable in all directions and recessed in the outer frame—13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not at the rear chamfer) * Widening planks stored centrally on the loading area * Excavator arm rest above the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the excavator arm rest) * Single-piece hydraulic access ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp adjustment * Platform above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm access slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * Empty weight: 5,900 kg * --technically permissible gross weight: 30,000 kg-- * Vehicle is galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. CW 36/2026 *

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tyre pressure monitoring with in-cab display via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provision in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, drop-down design, split centrally once * Steel rear wall, can be slid in between the ramps, with bracket for unused storage inside at the front bulkhead * Screw-fastened rear stanchions * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm (with 4 lashing rings mounted per side) * 1 x 6.3 t lashing ring at each front and rear corner * Profifix lashing rail along vehicle longitudinal axis, centre-mounted for securing loads up to LC 3000 daN * Multiple holes in front and rear cross-members for securing loads up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (retractable to 20 mm height) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye and support winch painted in a black tone * Side wall painting available in RAL colour of choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- Cgjdpfx Amol Thvxe Sjt * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from approx. CW 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with raise/lower facility and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal (no truck-side installation required) * SmartBoard as info tool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED rotating beacon (removable), rear ----General attachments: * Warning sign packages front & rear * 2 x tool boxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, mounted on the right side * Closed individual plastic mudguards at the front * Straight steel rear mud flaps, each with spray protection (spray suppression) * Side underrun protection ----Lowbed platform: * Swivel platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. lids, lockable * Flooring made of 50 mm softwood on the swivel platform and 60 mm softwood on the lowbed platform * 20 mm rubber flooring instead of wood in the driving lane area with a lowbed length of 6,780 mm including the drive-on slope * Rubber covering on the drive-on slope, left and right, approx. 860 mm long * 4 stake pockets per side (stakes not included), with 2 t lashing capacity each ----Chassis: * Chassis made of high-strength fine-grained steel ----Load securing (Lasi package): Swivel platform: * 2 pairs of 13.4 t lashing eyes on the outer frame of the swivel platform Lowbed: * 4 pairs per side of 10 t foldable lashing rings on the outer frame, loadable in all directions * 2 pairs per side, rear, of 13.4 t pivoting lashing rings ----Ramps: * Rubber covering on the foldable drive-up ramps * Hydraulic foldable ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3-meter total width (not in the rear slope area) * Widening planks stored in a side compartment on the left ----Excavator arm recess: * Excavator arm recess above the rear axle up to the end of the drive-on slope, approx. L=2,100 mm x W=740 mm x D=190 mm * 2 pairs of 6.4 t lashing rings on the sides in the excavator arm recess ----Hydraulics: * Hydraulic flow divider in the trailer (when hydraulic pump output in the truck is over 40 - max. 120 l/min) ----Loading dimensions: Cedpfxoylfvgj Am Sogt * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm drive-on slope) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Contour tape on sides and rear, reflective * Chassis, swivel platform, drive-up ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may include special equipment ----Delivery time: * Vehicle available approx. from KW 23/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring Cedpfx Amel Th Ado Sjgt * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, konfigurácia náprav: 2 nápravy, celková šírka: 25 000 mm, celková výška: 40 000 mm, Rok výroby: 2014, Výbava: ABS, Na otázky ohľadom vozidla Vám rád odpovie pán Seidel (telefonicky). MÜLLER MITTELTAL SF32BM/BT auto-nadstavba na betón Nadstavba: Liebherr HTM 1004 10m³, BPW nápravy, bubnové brzdy, pružinové zásobníky, Wabco ABS, 1. náprava zdvíhacia, vzduchové odpruženie, prípustná celková hmotnosť: 32.000 kg, pohotovostná hmotnosť: 6.510 kg, užitočné zaťaženie: 25.490 kg, dezén pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Na požiadanie Vám pripravíme ponuku na leasing alebo financovanie. Cgodpfxoyfu Sde Am Set Pán Seidel Vám ochotne poradí telefonicky. Ďalšie informácie nájdete na našej domovskej stránke. ... Chyby, zmeny a medzipredaj vyhradené!!! = Ďalšie informácie = Celková prípustná hmotnosť: 32.000 kg Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t Gigant nápravy * Parabolické listové pružiny s vyrovnávacou jednotkou * Výškovo nastaviteľná oj o cca 300 mm * BPW podperný zdvihák * Mechanické oporné nohy vzadu Cedpfxjwyhzps Am Ssgt * Plastová náradová skrinka vpredu vpravo na čelnej stene * Bočný nárazový chránič * LED osvetlenie * 50 mm podlaha z ihličnatého dreva * V rohoch pred čelnou stenou a zadným nosičom vždy 1 x 6,3 t kotviaci bod, po stranách vždy 2 kotviace UVV oká 6,3 t zapustené v vonkajšom ráme * Jednodielne mechanické rampy s roštom s pružinou pre jednoručnú obsluhu cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a oj žiarovo zinkované * Nápravy, pružiny, vzduchová nádrž, predný zdvihák lakované v odtieni čiernej * Nové vozidlo s plnou zárukou výrobcu * Chyby a predaj počas ponuky vyhradený * Ihneď k dispozícii z Egestorfu

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 10/2013, celková šírka: 2 750 mm, Rok výroby: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-axle | Hydraulic lowdeck | 48 t permissible gross weight | 275 cm wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for transporting machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy build and reliability. Technical specifications: Brand: Müller Mitteltal Model: ITS-VLL 30.0 Profi Chassis number (VIN): WMM00000D0057250 Permissible gross weight: 48,000 kg Axle configuration: 3 axles Axle loads: Cgodpfoy I Si Tsx Am Set Axle 1: 10,000 kg Axle 2: 10,000 kg Axle 3: 10,000 kg Permissible point load: 18,000 kg Load deck: Low deck (low loader specification) Loading ramps: hydraulically operated Low bed: hydraulically adjustable (up/down) Tyres: in good condition Construction: all-steel chassis Max speed: 80 km/h Features & Options: Heavy-duty low loader version Hydraulically height-adjustable low deck Hydraulic rear loading ramps Wide (275 cm) and stable loading platform Suitable for excavators, rollers, cranes, etc. Robust construction, ready for immediate use Condition: The trailer is pre-owned but fully functional and shows age and use-related wear marks. Technically a robust and reliable equipment transporter. Ready for immediate use – ideal for transport and construction companies. For further information or to arrange a viewing, please contact us. = Further Information = Axle configuration Rear axle 1: Twin wheels; Max axle load: 10,000 kg; Steered Rear axle 2: Twin wheels; Max axle load: 10,000 kg; Steered Rear axle 3: Twin wheels; Max axle load: 10,000 kg; Steered Weights Unladen weight: 14,500 kg Payload: 33,500 kg Gross vehicle weight: 48,000 kg Maintenance, history, and condition APK (MOT/Technical inspection): valid until 02.2027 Technical condition: very good Visual condition: very good Financial information Price: On request Further information Please contact Klaas Gerrits or Henk Gerrits for more information.

Stav: nový, maximálna hmotnosť nákladu: 6 900 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plates and safety locking pins for different support heights * Drawbar with 40 mm bolt-type towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel fenders with splash guards * Closed side underrun protection usable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with locking clamps to secure drum at the bearing arm ends and a central claw lock to secure the cable drum superstructure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter with centering and rotatable ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic supply and return lines * Steel construction and hydraulics prepped for retrofitting an auxiliary engine * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized Cgsdpexyniwjfx Am Set * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Cjdpfx Aoyy I U Nsm Sogt

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Cgsdpjyy I U Aofx Am Sst

Stav: použitý, pohotovostná hmotnosť: 3 320 kg, maximálna hmotnosť nákladu: 10 180 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/2003, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 5 040 mm, zavesenie: oceľ, veľkosť pneumatiky: 285/70R19,5 148/145J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 285/70R19,5 148/145J, veľkosť zadnej pneumatiky: 285/70R19,5 148/145J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, príplatok za rampy: 800 €, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na vyžiadanie!, Viac detailov: ! Codpfeyy I S Isx Am Segt

Stav: použitý, pohotovostná hmotnosť: 3 110 kg, maximálna hmotnosť nákladu: 9 490 kg, celková hmotnosť: 12 600 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2016, ďalšia kontrola (TÜV): 02/2025, dĺžka ložného priestoru: 4 550 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 285/70R19.5, farba: modrá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, oceľová nadstavba, 2 nápravy, ojový príves, listové pruženie, ABS (protiblokovací systém), upevňovacie oká, odkladacia schránka, výkyvné dvere Nadstavba: 2-nápravový trojstranný sklápací príves s gigantovými nápravami, bubnové brzdy, rám žiarovo zinkovaný! Nakladacia výška cca 1290 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas medziobdobia a chyby vyhradené! Cgedpfewth Iisx Am Sst

Stav: použitý, konfigurácia náprav: 3 nápravy, zavesenie: parabolický list (pružina), veľkosť pneumatiky: 235-75R17.5, Rok výroby: 2010, 3-nápravový nízkozdvižný príves, prejazdný zozadu. Povolená celková hmotnosť 30 000 kg, užitočné zaťaženie 22 700 kg. Nakladacia plocha 8 900 mm (7 000 + 1 900) x 2 550 mm, výstražný balík pre nadrozmer, 12 kotviacich ôk a 8 vreciek na stĺpiky s možnosťou súčasného kotvenia, 6 prepraviek na náradie. Dvojdielne hydraulické rampy cca 2 100 + 2 000 x 800 mm s gumovým povrchom, hydraulická zadná podpera. Nápravy BPW, EBS, parabolické pruženie s vyrovnávacou jednotkou, pneumatiky 235-75 R 17.5. Kovaný oje, otočné ťažné oko 40+50 mm. 2-vedenie pneumatík (duomatic), 2-vedenie hydrauliky, 24 voltov. Výška nakladania prázdneho prívesu cca 910 mm. Oranžový náter. STK platná do 03-2027. = Ďalšie informácie = Rozmer pneumatiky: 235-75R17.5 Pruženie: parabolické Vlastná hmotnosť: 7 300 kg Užitočné zaťaženie: 22 700 kg Celková hmotnosť: 30 000 kg Cgodjy Evvlepfx Am Sst Krajina výroby: DE Kontaktujte Jana-Marca Schwickerta pre viac informácií.

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27,0 plošina: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové valce * Bubnové brzdy * 3 x 9 t BPW Eco nápravy * Vzduchové odpruženie so zdvíhacou a spúšťacou funkciou s RTR-funkciou Cgedpfx Amjr Dpzxj Sjt * 1. náprava zdvíhateľná * posledná náprava ako následná riadená náprava s elektropneumatickou uzávierkou riadenia cez PIN spätného chodu (uzávierka následnej nápravy z Fhs. pre manévrovacie účely - bez inštalácie na strane nákladného vozidla - zadelená na PIN 10 v 15-kolíkovom konektore, len na manévrovanie, nie pre verejnú cestnú premávku) * SmartBoard ovládacia jednotka ako infotool s tlakovými snímačmi na indikáciu celkového zaťaženia náprav * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle cez EBS signál bez potreby inštalácie v nákladnom vozidle * Pevné stredové ťažné oj s 50 mm prírubovým ťažným okom (zaťažené 900 mm, mm výškové nastavenie na hlavovej doske) * Mechanická podperná kladka vpredu, mechanické výklopné vzpery vzadu na podvozku * Hydraulický rozdeľovač prietoku * Bočné steny priebežné (bez stredových stĺpikov) až po najazdovú rampu * Sklopné zadné stĺpiky * Oceľová zadná stena zasunutá pred zadné stĺpiky * Mechanicky nastaviteľná sada výstražných tabúl vpredu a vzadu * Náradové skrinky z pozinkovaného oceľového plechu - čierny práškový lak - cca 650 x 300 x 600 mm na pravej strane * 15-kolíkový elektrický konektor * LED koncové svetlá * LED maják (odnímateľný) vrátane držiaka a inštalácie * 2 x LED cúvacie svetlá na zadnej časti vozidla (ovládané spätným chodom) * Blikajúce LED bočné obrysové svetlá * 60 mm smrekovcová/douglasková podlážka * 400 mm oceľová čelná stena nasadzovacia * Dierovaný vonkajší rám cca 45° ohnutý s prípravou na montáž 3 t sklopných zaisťovacích strmeňov * V rohoch vždy 1 x 10 t istenie a navyše po bokoch vždy 2 x 10 t, ako aj 3 x 6,3 t zaisťovacie krúžky * V čelnej a zadnej priečke rozličné otvory pre zaisťovacie možnosti 1,2 t * Hydraulické jednoprvkové najazdové rampy cca 3 000 x 720 mm, mechanicky bočne nastaviteľné * 4-ventilový hydraulický blok pre prípadnú dodatočnú montáž hydraulického posuvu nájazdových rámp * Podvozok, ťažné oj, čelná stena, mechanické zadné podpery, najazdové rampy žiarovo zinkované * Nápravy, vzdušník, prírubové ťažné oko a predná podperná kladka nalakované čiernou farbou * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákl. vozidle nad 40 l až do 120 l/min) * Nové vozidlo so zárukou výrobcu * Právo na chyby a medzičasný predaj vyhradené * Ihneď k dispozícii, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders Csdpjykx Nksfx Am Sogt * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: Codpfxoykx Nqo Am Ssgt * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (axle lock for maneuvering controlled by PIN 10 of the 15-pin connector—only for maneuvering, not for public road use, without truck-side installation) * SmartBoard control box as information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded height 900 mm, adjustable on head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign kit, front and rear * Toolboxes made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm, mounted on the right side * Hydraulic flow divider * Continuous side walls (without center posts) up to the approach slope * Rear stanchions foldable * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector Csder Dpz Ajpfx Am Sjgt * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at rear of vehicle (operated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood floor * 400 mm steel front wall, slotted in * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t drop lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings along each side * Various holes in front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm, mechanically adjustable width * 4-section hydraulic control block for optional retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical support legs, ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing gear painted black * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: použitý, Rok výroby: 2023, farba: zelený, objem nakladacieho priestoru: 11 m³, šírka ložného priestoru: 2 420 mm, dĺžka ložného priestoru: 5 100 mm, výška ložného priestoru: 900 mm, najazdené kilometre: 1 001 km, prvá registrácia: 01/2023, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, kyvné klapky. Nadstavba: výmenný kontajner so sklopnými hliníkovými bočnými stenami, cca 11 m³, celková dĺžka kontajnera cca 5800 mm! Výmenný rám je z roku 2023 a Schwarzmüller nadstavba je výrazne staršia. Presný rok výroby sa nedá určiť, keďže nie je prítomný typový štítok! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmena, medzi-predaj a omyly vyhradené! Cedjy Dvdtopfx Am Ssgt

Stav: použitý, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2017, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 6 250 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Ďalšie informácie 400 mm sklápateľné bočné steny - Pružinový zdvihák bočnice - Nasadzovacia zadná stena - Veľký upínací balík - Dierovaná lišta na ložnej ploche - Predná oporná noha výškovo nastaviteľná Cedpfjy Hn D Rex Am Segt - Zadné oporné nohy sklápateľné - Plastová náradová skrinka - BPW nápravy - Pružinové rampy s mriežkou

Stav: použitý, maximálna hmotnosť nákladu: 4 960 kg, celková hmotnosť: 10 500 kg, prvá registrácia: 04/1993, ďalšia kontrola (TÜV): 01/2026, dĺžka ložného priestoru: 6 260 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 2 430 mm, objem nakladacieho priestoru: 37 m³, Výbava: ABS, zdvíhacie čelo, 2-nápravový tandemový chladiarenský príves, 7 m, so zdvíhacou plošinou s nosnosťou 1 t. * THERMOKING LND-II MAX (dieselový motor) a stacionárne chladenie 380 V ELEKTRO * Číslo vozidla pre zákaznícke dopyty: 4593 * Zdvíhacia plošina * Vzduchové pruženie * EBS * Protišmykový systém (ABS) Bez záruky za tlačové a pravopisné chyby Predaj iba podnikateľom Zmeny a medzičasný predaj vyhradené. Popis slúži iba na identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Záväzné je znenie v kúpnej zmluve. * TOP SERVIS + KVALITA * Radi Vám pripravíme ponuku na leasing, financovanie alebo splátkový predaj Cgsdpfxjykxflj Am Set Poistenie záruky na vyžiadanie u poisťovateľa * TÜV / UVV LBW / tachografová kontrola a montáž OBU zariadenia cez našich partnerov na mieste * Colná poznávacia značka na 30 dní Všetky colné doklady pre export sú možné, je nutné ich objednať individuálne * Mýto cez Toll-Collect je možné objednať u nás * Bezplatný transfer z letiska Stuttgart alebo železničnej stanice Metzingen (Württ) * ŽELEZNIČNÁ STANICA PRE PRÍCHOD: 72555 METZINGEN/WÜRTT. * PRE ANGLIČTINU * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP číslo * * ---- Navštívte našu webovú stránku na * viac ako 200 vozidiel stále na sklade

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/1992, Rok výroby: 1992, Výbava: ABS, Hrubá hmotnosť: 3.140 kg Užitočné zaťaženie: 14.860 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 1.500, US$ 1.767 Cgjdjxt Sd Sepfx Am Sot

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS = Ďalšie informácie = Hrubá hmotnosť: 4.600 kg Užitočné zaťaženie: 13.400 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Codpfx Amsxt Rw Ro Sogt Predajná cena: € 6.500, US$ 7.658