Müller-Mitteltal Pracovná Plošinová Náves kúpiť použité (10 130)

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with in-cab display via EBS signal – no installation needed on the truck side * Warning panel packages front & rear * Side and rear reflective contour tape * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon rear Kledpfx Ajrczm Dskwot * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel plate as well as basket-type spare wheel holder on the right side * Closed single plastic mudguards at front * Straight steel spray guards at rear, each with spray suppression * Side underrun protection * Extended offset cranked frame 500 mm forward * Turntable platform extended at the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lid * Chassis made of high-strength fine-grained steel * Floor above turntable platform made of 50 mm, and on the low-bed platform 60 mm conifer timber * Outer planks of loading ramps made of 50 mm bamboo wood * 4 pocket stakes each side (but no stakes included) with simultaneous 2 t lashing capacity * Lashing package consisting of: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and on each side 4 pairs of 10 t lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings at the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening boards stored on the left side in a storage compartment * Excavator arm rest above the rear axle up to the start of ramp slope approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic side-shift of the ramps on sliding tube from the ramp shaft * Load area above the turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (including 860 mm ramp slope) * Chassis, turntable, loading ramps and mechanical drop supports at rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Errors and subject to prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, ETÜ-TA-R 21.0 ----Brzda: * Wabco EBS-E (elektronický brzdový systém) * Nouzové odjištění pružinových válců * Bubnové brzdy ----Náprava: 2 x 11 t Gigant nápravy Kodpfx Aksl Tihxjwjlt ----Odpružení: * Vzduchové odpružení se zařízením pro zvedání a spouštění ----Tažná tyč / tažné oko s přírubou: * Tažná tyč s 50 mm tažným okem s přírubou a výškově nastavitelná tažná tyč ----Osvětlení / Elektrika: * 15-pólová elektrická přípojka * LED osvětlení 12/24 V * RDÜ – systém monitorování tlaku v pneumatikách ----Obecné montované díly: * Jost opěrná noha vpředu * Vnější sklopné podpěry vzadu * Plastová schránka na nářadí cca 750 x 350 x 300 mm, pravá strana * Boční ochrana proti najetí * Plastové čtvrt-blatníky ----Nízkoložná plošina: * Před čelní stěnou a zadní šikminou příprava pro dodatečnou montáž kontejnerových uzávěrů pro přepravu 20" kontejnerů * Provedení 21 t celkové hmotnosti s vyztuženým rámem a zesílenými nápravami * Vyztužovací sada pro převoz vrtného zařízení na podvozku * 50 mm podlaha z jehličnatého dřeva, upnutá * Před čelní stěnou příprava pro dodatečnou montáž kontejnerových uzávěrů * Šroubovaná čelní stěna z hladkého plechu * Dělené bočnice z ocelového plechu – trapézový profil – sklápěcí s výklopným sloupkem uprostřed * Ocelová zadní stěna zasouvatelná mezi rampy – držák pro nevyužití uvnitř před čelní stěnou * Zadní sloupky přišroubované ----Zajištění nákladu: * Děrovaný vnější rám cca 45° ohnutý s vázací silou 2 t každých 480 mm * Možnost instalace sklopných vázacích ok 3 t každých 600 mm * Profifix vázací lišta ve středové podélné ose, pro vázání až LC 3000 daN * V rozích vpředu a vzadu vždy 1 x 10 t vázací oko * Balíček zajištění s každé strany 2 x 8 t zapuštěných vázacích ok ve vnějším rámu, ve čelní a koncové příčce různá oka pro možnost vázání 1,2 t ----Rampy: * Jednodílné mechanické rampy s mřížkovou nášlapnou plochou a pružinovým mechanismem pro jednoruční obsluhu, cca 3 000 x 620 mm (stlačitelné na 20 mm) * Náběhový úhel vzadu cca 860 mm rámu ----Nakládací výšky: * Nenaložený cca 940 mm * Naložený cca 910 mm ----Rozvor / Pneumatiky: * 1 810 mm * Pneumatiky: 235/75R17.5 ----Lakování: * Lakování bočnic v požadované barvě dle RAL (bez speciálních ani metalických laků), změna možná do cca 6 týdnů před dokončením * Tažná tyč, čelní stěna, zadní čelo, podpěry a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchojemy a podpěrná noha v černém odstínu ----Informace: * Nové vozidlo s výrobcovou zárukou * S výhradou omylů a mezitímního prodeje * Ilustrační fotografie ----Dodací doba: * K dodání od týdne 29/2026

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, ETÜ-TA-R 21.0: ----Brzda: * Wabco EBS-E (elektronický brzdový systém) * Nouzové odjištění pružinových válců * Bubnové brzdy ----Náprava: * 2 x 11 t Gigant nápravy Kljdpfoq Dyu Uex Akwot ----Odpružení: * Vzduchové odpružení se zvedací a spouštěcí funkcí ----Tažná tyč / příruba oka: * Tažná tyč s flančovaným okem 50 mm a výškově nastavitelná tažná tyč ----Osvětlení / Elektrika: * 15-pólová elektrická zástrčka * LED osvětlení 12/24 V * RDÜ monitorování tlaku v pneumatikách ----Obecné montážní díly: * Jost opěrná noha vpředu * Vnější sklopné podpěry vzadu * Plastová skříňka na nářadí cca 750 x 350 x 300 mm, pravá strana * Boční ochrana proti podjetí * Plastové čtvrtkryty kol ----Ložná plocha nízkoložného přívěsu: * Před přední stěnou a v zadní části příprava pro dodatečnou montáž zámků na přepravu 20" kontejnerů * Provedení 21 t celkové hmotnosti s zesíleným rámem a zesílenými nápravami * Zesilovací balíček pro přepravu vrtného zařízení na podvozku * 50 mm podlaha ze smrkového dřeva s upínáním * Před přední stěnou příprava pro dodatečnou montáž zámků na kontejnery * Přišroubovaná přední stěna z hladkého plechu * Dělené boční stěny z ocelového plechu – trapézový profil, sklopné se sklopnou středovou hrazdou * Zadní stěna z ocelového plechu zasouvatelná mezi rampy – držák v neaktivní pozici před přední stěnou * Zadní sloupky přišroubované ----Zajištění nákladu: * Perforovaný vnější rám ohnutý cca 45° se zajišťovací silou 2 t každých 480 mm * Možnost instalace sklápěcích ok pro upevnění 3 t každých 600 mm * Profifix upevňovací lišta středem v podélné ose, možnost upnutí až LC 3000 daN * V každém rohu vpředu i vzadu 1 x 10 t upevňovací bod * Bezpečnostní balíček: na každé straně 2 x 8 t zapuštěné upevňovací body v vnějším rámu, v předním a koncovém nosníku různé otvory pro možnost upnutí 1,2 t ----RAMPY: * Jednodílné mechanické rampy z roštového materiálu s pružinovým mechanismem pro obsluhu jednou osobou, cca 3 000 x 620 mm (lze zasunout až na 20 mm) * Najížděcí sklon vzadu cca 860 mm šasi ----Nakládací výšky: * Prázdné cca 940 mm * Naložené cca 910 mm ----Rozvor / Obojení: * 1 810 mm * Pneumatiky: 235/75R17.5 ----Lakování: * Lakování bočních stěn v libovolném odstínu dle vzorníku RAL (bez speciálních nebo metalických laků), změna možná cca do 6 týdnů před dokončením * Tažná tyč, přední stěna, zadní čelo, sklopné podpěry a nájezdové rampy žárově zinkovány * Nápravy, pružiny, vzduchové nádoby a opěrná noha lakovány v černém odstínu ----Informace: * Nové vozidlo s tovární zárukou * Změny a omyly vyhrazeny * Ilustrační fotografie ----Doba dodání: * K dispozici od 29. kalendářního týdne roku 2026

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, Rok výroby: 2026, RA-T 18.0: Loadable from front and rear ---- Brakes: * Wabco EBS-E (electronic brake system) * Emergency release mechanism for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross clamping units Klsdpfx Asl Tn U Rekwst ---- Axles: * 2 x 10 t BPW wide-track axles ---- Suspension: * Air suspension (automatic lowering when the brake is uncoupled) ---- Electrics / Lighting: * Tire pressure monitoring with display in the truck via EBS signal (no truck-side installation required) * 15-pin power plug * LED lighting system with protective roof * 2 LED reversing lights (actuated via reverse gear) ---- Drawbar: * Pneumatically lowerable drawbar, 1,800 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ---- General Attachments: * Plastic toolbox 858 x 500 x 500 mm, mounted right side * Storage box for container net made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side mounted * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection (RAL 9010 pure white) usable as advertising space * Rear underrun protection * Plastic rear impact buffers * Folding A-sign * Hazard placard with document pocket and rear reflective parking warning panel ---- Container Platform: * Additional front loading possible with rear track lowering and plug-in stop * Roller recesses in the turntable area with mechanically adjustable stop angles (2 positions) front left and right on the tracks * Track length approx. 6,830 mm * Pneumatic 4-point clamp lock * Suitable for transport of external roll-off containers according to DIN 30722 Part 1 - Dekra load securing certificate available ---- Loading Height: * Loaded approx. 1,130 mm ---- Painting: * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable and drawbar painted in black ---- Info: * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale * Sample pictures ---- Delivery Time: * Available approx. from calendar week 21/2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon (rear) * 24 V 15-pin as well as additional 12 V 7+4 pin power cables * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet as well as a basket-type spare wheel carrier mounted on the right side * Closed single plastic fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Offset crank extended 500 mm forward * Turntable platform extended 520 mm at the front with 45° corners and 3 recessed storage compartments including lid and lockable * Chassis made of high-tensile fine-grained steel Kedpol Th Evefx Akwelt * Decking above the turntable platform: 50 mm softwood, deep bed platform: 60 mm softwood * Outer planks on the loading ramps: 50 mm bamboo wood * 4 stake pockets per side (no stakes provided) with simultaneous 2 t lashing capability * Load securing package includes: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair each of 13.4 t lashing rings front and rear on the side outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of lashing rings 6.4 t on the side in the excavator arm tray, 8 pairs of galvanized folding outriggers for 3 mtr overall width (not provided at the rear slant) * Widening planks stored in a left-hand side compartment * Excavator arm tray above rear axle up to end of approach slant approx. 2,300 x 740 x 190 mm * Mechanical rear support legs * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded floor height approx. 860 mm (including 860 mm approach slant) * Chassis, turntable, loading ramps, mechanical folding rear support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles Klodpfoy Tr Hisx Akwjt * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of air suspension during tipping (can be deactivated via control unit in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tires: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with repositionable K80 ball coupling ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with elevated support for connection lines ----General Attachments: * Front support winch * Bolted steel underrun protection * Plastic quarter fenders in front of the first and behind the last axle * Removable protective grid for rear lights (not approved under the German Road Traffic Licensing Regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Steel 3-way tipper body (fixed front wall, continuous side walls without central stanchions, right side wall swinging via central lock and foldable with drop-side spring assist * Left side wall foldable with drop-side hydromatics * Rear tailgate swinging via automatic hook lock * 5 mm steel floor plate made of HARDOX-450 steel or equivalent ----Load Securing: * 4 x 3 t UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, support winch, flange drawbar painted in black tone * Tipper body painted in a RAL custom color of choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion * Chassis, protective grid for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery Time: * The vehicle is still under construction and will be completed in calendar week 44 / 2026, provided uninterrupted and consistent production

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Rok výroby: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-assist for maneuvering purposes on the 1st axle (engaged via EBS) * 1st axle as a lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated via a control element in the cab) Klsdjy Tr Hcjpfx Akwet ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12V & 24V electrics * LED rear lights 12/24V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with repositionable K80 ball coupling, mm ----Coupling Height: * Coupling height approx. 440 - 550 mm loaded, with raised gantry for connecting lines ----General Attachments: * Support winch at the front * Bolted steel underrun protection * Plastic quarter mudguards in front of the 1st and behind the last axle * Removable guard for tail lights (not permitted for use on public roads as per national traffic regulations and must be removed before entering public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Steel 3-way tipper body (fixed headboard, continuous side walls—without central stanchions—right side wall hinged with central locking and foldable via drop-side spring bar, left side wall foldable with drop-side hydraulic system) * Rear tailgate hinged with automatic hook locking * 5mm steel floor plate made from HARDOX-450 steel or equivalent ----Load Securing: * 4 x 3 t lashing rings per side, recessed into the external frame in accordance with accident prevention regulations (UVV) ----Painting: * Axles, air tanks, support winch, flange eye painted in black * Tipper body painted in a chosen RAL standard color (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Chassis, guards for tail lights, hot-dip galvanized ----Information: * Sample images ----Delivery Time: * The vehicle is still under construction and, assuming uninterrupted and consistent production, will be completed in week 44 / 2026.

Stav: použitý, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, celková šírka: 2 550 mm, celková výška: 3 700 mm, Výbava: ABS, Nemecký príves, * 30-tonový * Rozšíriteľný na 3 metre * Pružinové nájazdy Kljdoy Trntopfx Akwjt * Ťažné oko 50 mm * Vzduchové odpruženie Ďalšie informácie telefonicky u Christiana Bredemeiera.

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, celková šírka: 2 550 mm, celková výška: 970 mm, Rok výroby: 2026, Výbava: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 Truck Tandem Three-Way Tipper - Tipper body dimensions: 5,000 x 2,420 mm (internal clearance) - Side wall height: 500 mm - Floor made of fine-grained steel S 420 MC, 4 mm thick - Side walls laser-welded from high-tensile fine-grained steel, fixed front wall - 2 pairs of folding lashing rings with a lashing capacity (LC) of 5,000 daN, 1 pair each recessed front and rear in the steel floor. 4 pairs of folding lashing rings with LC 3,000 daN recessed in the steel floor. - Net hooks integrated on both sides and rear in the side wall mounts and in the front wall - Reinforced and certified body according to EN 12642 XL - 2 LED reversing spotlights at the rear of the trailer - Aluminium loading ramps without wheel groove, suitable for rubber-tyred and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm - Plastic toolbox - Aluminium air reservoir - BPW axle, with S-cam brake - Tyres: 235/75R17.5 Suitable for a coupling height of approx. 925 mm unladen +/- 150 mm Subject to prior sale and errors! Kedpfx Asy S Nwvskwelt Sale exclusively based on our General Terms and Conditions. Important Notice – Please Read: Despite careful checking of all details stated in our offer, errors may occur. In some cases, such errors arise from data transmission systems of various platform providers. Therefore, we point out that all details are provided without guarantee and do not constitute a legally binding claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information intended to initiate a contract. The information provided here is non-binding and does not represent warranted characteristics.

Stav: použitý, maximálna hmotnosť nákladu: 29 750 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2010, ďalšia kontrola (TÜV): 05/2026, Rozmer-B 11 750 mm Prevádzková hmotnosť 10 250 kg Zaťaženie nápravy 2 x 10 000 kg Kodpfsxpmmmex Akwslt Dĺžka ložnej plochy nad točnicou 2 400 mm vrátane 350 mm skosenia Dĺžka ložnej plochy 7 700 mm vrátane 900 mm skosenia Nakladacia výška 880 mm Šírka 2 550 mm, rozšíriteľná na 3 000 mm Vybranie pre uloženie ramena rýpadla (d x š x v cca 2 500 x 740 x 180 mm) SAF nápravy so vzduchovým odpružením Dvojdielne hydraulické nájazdové rampy, 2 100 mm + 2 000 mm dlhé, 650 mm široké vrátane Rampy hydraulicky nastaviteľné Hydraulické podperné nohy vzadu Prelis na kolesá za druhou nápravou Prelis na predné koleso, horná dĺžka cca 2 000 mm x 1 100 mm, spodná hĺbka cca 350 mm Prelisy na kolesá medzi 3. a 4. nápravou Prelis na zadné koleso, horná dĺžka cca 1 300 mm x 550 mm, spodná hĺbka cca 220 mm

Stav: použitý, pohotovostná hmotnosť: 6 400 kg, maximálna hmotnosť nákladu: 23 600 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 7 800 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 920 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: na ceste / v tranzite, 3 osi, otočný oj, listové odpruženie, ABS (protiblokovací systém), uchytné oká, hydraulické nájazdové rampy, zadná podpera, bočné hliníkové ochranné kryty, dvojmontáž kolies. Nadstavba: 3-nápravový nízkopodlažný príves s hydraulickými nájazdovými rampami, pozinkované rampy, 3x 10t nápravy! Všetky údaje sú bez záruky, pretože vozidlo je na ceste! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a chyby vyhradené! Kledpsy R Ekiefx Akwjt

Stav: použitý, prvá registrácia: 10/2013, Rok výroby: 2013, ABS, EBS, automatické napínače tiahla, 2x 10 t nápravy (BPW), vzduchové odpruženie, bubnové brzdy, pružinová parkovacia brzda na zadnej náprave, pneumaticky znížiteľné ťažné zariadenie, odľahčovací ventil na prednej náprave, račňové napínadlo, hydraulické bočné uchytenie, uzatvorený úložný box, dva cúvacie svetlá, box na sieť, držiak rezervného kolesa, uzatvorená bočná ochrana, pevná zadná ochrana proti podjazdu, zadný záster na ochrane proti podjazdu, skladací A-štít, objem korby 2x10 m³ ASK-mulda. EXW 27793 Wildeshausen K dispozícii ihneď Kedpfxsy S Sx Ne Akwelt

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 to. BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted at the front right on the bulkhead ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Pre-installed fittings at the bulkhead for subsequent mounting of container locks * Bolted smooth steel plate bulkhead * Fold-down side walls made of trapezoidal-profile steel plate with spring-assisted drop sides * Steel rear panel, can be slid in between the ramp holders at the front of the bulkhead when not in use * Rear stanchions bolted ----Load Securing: Kjdpfsq Ra D Eex Akwolt * Perforated outer frame, approx. 45° angled with 2 to. lashing capacity every 480 mm * Option for 3 to. recessed lashing rings every 600 mm * 1 x 6.3 to. lashing point in each of the front and rear corners * Various holes in the bulkhead and end crossmember for 1.2 to. lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear panel, rear stanchions and loading ramps * Side wall paint finish in RAL 9010 pure white * Side wall painting in other RAL colors available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from KW

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader. ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device Kedpfx Aksl Tld Iowolt ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), displayable in the truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel sheet * Spare wheel holder in basket design, installed on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic bump stops * Foldable A-sign at rear ----Loading Platform: * Hot-dip galvanized main frame with elevated outer frame for guiding roll containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport: container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical drop-in stop angles at the front of the track * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of skips; front 4 skip stops plug-in with swinging stop * Weld bead as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; four lashing brackets in cloverleaf design per side * 1 pair of 13.4 t UVV lashing rings at the front * Four 8 t lashing eyes per side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on the sides and rear * Hot-dip galvanized frame * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Gross vehicle weight rating (GVWR): technically up to 20,000 kg * New vehicle without initial registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 10 400 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * ETK-TA-R 14,4: ----Brzda: * EBS * Núdzové uvoľňovanie pre pružinové brzdové valce * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy ----Pérovanie: * Parabolické perá s tandemovým vyrovnávacím agregátom ----Ťažné oko / Ťažná tyč: * Výškovo nastaviteľná ťažná tyč o 300 mm s 40 mm prírubovým ťažným okom Kedpfx Aetr Sucskwelt ----Elektrika / Osvetlenie: * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v nákladnom aute cez EBS signál, bez potreby inštalácie na strane nákl. vozidla * 15-kolíková elektrická zásuvka * LED koncové svetlá ----Všeobecné prídavné diely: * Mechanický podperný zdvihák vpredu * 2 mechanické sklopné podpery vzadu * Plastová náradová skrinka cca 750 x 350 x 300 mm na pravej strane * Skrutkovaný ochranný rám proti podbehnutiu * Plastové štvrť-blatníky ----Rám: * Hlavný rám z jemnozrnnej ocele ----Sklápacia plošina: * Sieťové háky po bokoch a v zadnej časti v ložiskách centrálneho zamykania, ako aj 2 ks na čelnej stene * Oceľová paletová dvojstranná sklápačka – čelná stena pevná z hladkého plechu, bočné steny s nepretržitou dĺžkou – bez stredových stĺpikov sklápateľné s pomocným zdvihom bočnice a kyvné cez manuálne centrálne zamykanie * Zadné stĺpy skrutkované * Oceľová zadná stena zasunutá pred rampy * V každom rohu 1 x 5 t upevňovacia oka a na každej strane v vonkajšom ráme 4 x 3 t upevňovacie oka * 4 mm podlaha z jemnozrnnej ocele ----Rampy: * Dvojdielne mechanické rampy z mriežkovej ocele s hliníkovou špičkou 2.150 + 1.300 mm x 600 mm (manuálne zložiteľné na 80 mm) ----Lakovanie: * Podvozok, ťažná tyč, zadné stĺpy, ochrana proti podbehnutiu, mechanické podpery a nájazdové rampy pozinkované * Nápravy, perá, vzduchové nádrže, prírubové ťažné oko a zdvihák nalakované v čiernej farbe * Bočné steny a plošina v RAL 9010 čistá biela * Lakovanie bočných stien a sklápacej plošiny v inom RAL odtieni za príplatok možné ----Informácie: * Nové vozidlo so zárukou výrobcu * Zmeny, omyly a medzipredaj vyhradené ----Doba dodania: * dostupné od 7. kalendárneho týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 10 400 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * ETK-TA-R 14,4: ----Brzda: * EBS * Núdzové uvoľňovanie pre pružinové brzdové valce * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy ----Pérovanie: * Parabolické perá s tandemovým vyrovnávacím agregátom ----Ťažné oko / Ťažná tyč: * Výškovo nastaviteľná ťažná tyč o 300 mm s 40 mm prírubovým ťažným okom ----Elektrika / Osvetlenie: * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v nákladnom aute cez EBS signál, bez potreby inštalácie na strane nákl. vozidla * 15-kolíková elektrická zásuvka * LED koncové svetlá ----Všeobecné prídavné diely: * Mechanický podperný zdvihák vpredu * 2 mechanické sklopné podpery vzadu * Plastová náradová skrinka cca 750 x 350 x 300 mm na pravej strane * Skrutkovaný ochranný rám proti podbehnutiu * Plastové štvrť-blatníky Ksdotr St Uepfx Akwolt ----Rám: * Hlavný rám z jemnozrnnej ocele ----Sklápacia plošina: * Sieťové háky po bokoch a v zadnej časti v ložiskách centrálneho zamykania, ako aj 2 ks na čelnej stene * Oceľová paletová dvojstranná sklápačka – čelná stena pevná z hladkého plechu, bočné steny s nepretržitou dĺžkou – bez stredových stĺpikov sklápateľné s pomocným zdvihom bočnice a kyvné cez manuálne centrálne zamykanie * Zadné stĺpy skrutkované * Oceľová zadná stena zasunutá pred rampy * V každom rohu 1 x 5 t upevňovacia oka a na každej strane v vonkajšom ráme 4 x 3 t upevňovacie oka * 4 mm podlaha z jemnozrnnej ocele ----Rampy: * Dvojdielne mechanické rampy z mriežkovej ocele s hliníkovou špičkou 2.150 + 1.300 mm x 600 mm (manuálne zložiteľné na 80 mm) ----Lakovanie: * Podvozok, ťažná tyč, zadné stĺpy, ochrana proti podbehnutiu, mechanické podpery a nájazdové rampy pozinkované * Nápravy, perá, vzduchové nádrže, prírubové ťažné oko a zdvihák nalakované v čiernej farbe * Bočné steny a plošina v RAL 9010 čistá biela * Lakovanie bočných stien a sklápacej plošiny v inom RAL odtieni za príplatok možné ----Informácie: * Nové vozidlo so zárukou výrobcu * Zmeny, omyly a medzipredaj vyhradené ----Doba dodania: * dostupné od 7. kalendárneho týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 11.9: ----Brzda: * EBS brzdový systém * Nouzové odjištění pro pružinové válce * Bubnové brzdy ----Náprava: * 2 x 5,5 t BPW nápravy ----Odpružení: * Parabolické listové pružiny s vyrovnávací jednotkou ----Oje / Oko s přírubou: * Oje výškově nastavitelné o 300 mm * 40 mm přírubové tažné oko ----Obecné příslušenství: * Přední podpěrná noha Jost * Vnější žárově zinkované sklopné podpěry vzadu * Plastové čtvrt-blatníky * Plastová skříň na nářadí vpravo vpředu zvenku na čelní stěně ----Elektroinstalace / Osvětlení: * RDÜ – monitorování tlaku v pneumatikách * LED osvětlení Klodpfxorvvfwe Akwet ----Ložná plocha: * Ložná plocha 6,27 m * Vhodné pro přepravu kontejnerů * 50 mm podlaha z jehličnatého dřeva * Příprava před čelní stěnou pro dodatečnou montáž zámků kontejneru * Našroubovaná čelní stěna z hladkého plechu * Sklopné postranní stěny z trapézového ocelového plechu s podpěrou víka bočnice * Zadní stěna z oceli – zasunovací mezi držáky ramp během nevyužití, uvnitř před čelní stěnou * Šroubované zadní sloupky ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45° s upínací silou 2 t každých 480 mm * Možná instalace sklopných ok s nosností 3 t každých 600 mm * V rozích vpředu a vzadu vždy 1x 6,3 t upínací oka * V čelní a koncové příčce různé otvory pro možnost uchycení 1,2 t ----RAMPY: * Jednodílné mechanické nájezdové rampy s pružinou pro ovládání jednou osobou cca 2.750 x 600 mm (lze zasunout až na 20 mm) * Náběhový úhel vzadu cca 860 mm ----Pneumatiky: * Pneumatiky: 235/75R17.5 ----Rozvor: * Rozvor: 990 mm ----Lakování: * Žárově zinkovaný rám podvozku, oje, čelní stěna, zadní stěna, zadní sloupky a nájezdové rampy * Lakování bočnic v RAL 9010 (čistá bílá) * Lakování bočních stěn v jiném odstínu RAL za příplatek možné ----Info: * Změny a mezitímní prodej vyhrazeny * Nové vozidlo s výrobní zárukou ----Dodací lhůta: * K dispozici od týdne

Stav: použitý, maximálna hmotnosť nákladu: 6 610 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 11/2017, ďalšia kontrola (TÜV): 10/2026, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 2 500 mm, objem nakladacieho priestoru: 34 m³, Rok výroby: 2017, Výbava: ABS, 2-axle Müller-Mitteltal TA-2 Pr.+Pl. Trailer VIN: H0061885 Chassis / Attachments: * Air suspension * Tyres: 235/75 R17.5 * Remaining tread: approx. 70% * 1x Jost landing leg * 2x rear support legs Body: * Pr.+Pl. * Sliding tarp * Edscha sliding roof * Dimensions: 5,500 mm x 2,470 mm x 2,500 mm * Approx. 34 m³, 13 pallets Weights: * Gross weight: max. 10,500 kg - downrated to 10,000 kg (no SP inspection required) * Unladen weight: 3,390 kg * Payload: 6,610 kg Other information: * German vehicle * TÜV valid until 10/2026 * No safety inspection required due to downrating New main inspections / safety checks or weight downrating/uprating are available upon request. We are happy to assist you in obtaining export/transfer licence plates, and we can also arrange the transport of your purchased vehicles within Germany. Contact us! --- We speak the following languages: German, English and Russian! --- No liability for printing or typographical errors. Subject to change, prior sale and errors! --- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, we offer a wide variety of vehicles. Our corporate philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we provide an excellent all-round service package and assign you a dedicated contact person to support you throughout the purchasing or sales process. See for yourself! Our services for you: Kjdey Squpspfx Akwolt Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to help you organise special transports. Transit plates / export number plates We are happy to assist you with obtaining export/trip number plates. Customs formalities We are happy to help you with customs clearance.

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) Kljdpfx Akoq Euakswjt * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards Kedpfx Akotpta Dswslt * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: použitý, maximálna hmotnosť nákladu: 38 230 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2026, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Müller-Mitteltal Low Loader with Wheel Recesses TS 3 RM ML 30.0, 2 Loading Heights and Ramps * King Pin Load Increase from 12 t to 18 t incl. King pin mounted in: second king pin position 2", king pin up to and including gooseneck 2,750 mm. Rear clearance radius approx. 2,400 mm in the clear (minimum clearance of 150 mm recommended). Front clearance radius 1,480 mm or 1,570 mm with spare wheel. Note: Adequate clearance to the tractor unit must be ensured by the customer. * Extension components for the front and rear wheel recesses (205 mm deep). 6 loose planks for wheel recesses with bracket holders as receiving shafts according to code 09.112. Aluminum air tank instead of steel. * Smartboard control box mounted as an info tool on the trailer with pressure sensors, serves as a total axle load indicator. Display possible either via the control box or in the truck via the EBS air suspension system (depending on truck manufacturer). * SP Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the tractor platform B=2,480 x H=500 mm with top hinged lid, side doors and slanted. Aluminum side panels foldable to tractor platform (500 mm high), aluminum rear wall plug-in (150 mm high), aluminum drop sides inside and outside in RAL 9006 white aluminum painted. Includes foldable & removable rear stakes, galvanized (without final coat). Includes bolted front structure. Length front cross member to gooseneck 3,935 mm. Front clearance radius, without spare wheel, at gooseneck dimensions 2,450 mm or 2,750 mm approx. 1,750 or approx. 1,480 mm Klsdpoy R Ipuefx Akwjt * 2 container locks recessed in the front cross member * 3 storage shafts under the tractor platform for optional aluminum approach ramps or wooden planks for wheel recess covers * Folding outriggers/extending outriggers (galvanized) and wooden planks for widening included (not at the rear slope), plank holder on the tractor platform (track width of the load must not exceed 2,500 mm) * Second LED position light at the warning package front and rear (double lighting), only in conjunction with the warning package * 2 LED reversing spotlights on the rear of the trailer, controlled by reverse gear (suitable for 12V and 24V), max. a total of 2 additional permissible * 7-pin socket at the rear, assigned for overlength lighting with tail light (58R) and ground * Rubber covering on the loading ramp slope left and right (approx. 860 mm long), 190 07644 rubber covering strip on the inner plank of the one-piece ramps * Fully automatic central lubrication system with pump (24V), grease container and integrated trailer control, without ramp connection (for steering: incl. connection of the manifold on the tractor platform). Note: Only possible for tractor units with 24V lighting system! Subject to prior sale and errors! Sale exclusively according to our terms and conditions Important note ? Important information: Despite careful verification of all details in our offer, errors may occur. Some are caused by transmission errors in the systems of various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. The details provided here are without guarantee and do not constitute assured characteristics.

Stav: použitý, maximálna hmotnosť nákladu: 6 800 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 04/2026, Müller-Mitteltal KWH 9.9 ML Cable Transport Trailer with Diesel Engine * Model: KWH 9.9 ML * Drum brake system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic leaf springs * Rear square tube supports with spring assistance, base plate, and safety locking pins for adjustable support heights * Drawbar with 40 mm or 50 mm bolt-on towing eye (height adjustable) * Bracket for additional drawbar mounted on the right side of the towing device in the driving direction * Chassis made of torsion-resistant square tubing and cross beams * Plastic toolbox * LED lighting * Swiveling cable drum frame consisting of base frame, rotary bearings, and drum carrier arms * Carrier arm ends with locking closure for securing the drum shaft * Central claw lock secures the swiveling cable drum frame to the chassis * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * For drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulically operated pull and push cylinders with load holding valve * Control valve with automatic neutral position and pressure relief valve * Connectors, hoses, and pipes of hydraulic system NW 13 * Required oil capacity approx. 10 liters * Drum drive is motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic power unit with diesel engine and hand starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines can be provided either by truck hydraulics or power unit * Weather protection cover, hot-dip galvanized without top coat * Tires: 315/80 R22.5 Subject to prior sale and errors! Sale exclusively according to our terms and conditions. Kljdoy R Ipnspfx Akwst Important note: Despite careful verification of all details in our offer, errors may occur. Some may be caused by transfer errors in the systems of different platform providers. Therefore, please note that all information is given without obligation and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for contract initiation. All details provided are without guarantee and do not represent warranted characteristics.

Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, ETÜ-TA-R 19.0: ----Braking System: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizer ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tire monitoring system ----General Equipment: * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Bed Area: * 50 mm softwood floor * Bracket in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal steel sheet, foldable with drop side spring lifts * Steel rear wall, retractable between the ramps - storage bracket inside at the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In the front and rear corners, each with 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options * Profifix lashing rail in the center longitudinal axis for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm) * Rear approach angle approx. 860 mm ----Paint Finish: * Chassis, drawbar, front wall, rear wall, ramps and folding supports hot dip galvanized * Drop sides painted in RAL 9010 pure white * Side walls can be painted in a RAL color of your choice at additional cost * Axles, springs, air tank, flange eye, and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: Kledpfx Akel Th Hwewst * Available immediately from Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2024, ETÜ-TA-R 19.0 ----Brakes: Kjdpopk D D Hjfx Akwelt * Wabco EBS-E (electronic braking system) * Emergency release unit for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized steel, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * Reinforcement package for drill rig transport on the chassis - loading height + 20 mm * 50 mm softwood floor in clamped design * Fixture in front of the bulkhead for retrofitting container locks * Bolt-on bulkhead made of smooth sheet metal * Fold-down, trapezoidal-profile steel side walls with drop-side spring assist * Removable steel rear wall between the ramps - bracket for storage inside at the front when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * 1 x 10 t lashing ring in each front and rear corner; various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear entry slope approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Drop sides painted in RAL 9010 pure white * Side walls available in any RAL color for an extra charge ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equaliser unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange draw eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General accessories: * Jost mechanical landing gear at front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at each position of the central locking as well as 2 on the front wall ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper body: * Steel pallet-style 3-way tipper with continuous side walls, top with inner tube reinforcement – without centre stanchions, foldable with drop-side spring assist * Rear posts bolted * Combination steel double rear doors, asymmetrically split – can be swung and locked up to 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping, locking via galvanised rotary bolt at the rear and central locking, deactivation function for automatic rear wall operation when reversing tipping with open wing door * 4 mm fine-grained steel floor plate * Rear receiver rail for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner, and 4 x 3 t lashing eyes each side recessed into the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment under the loading platform rearwards, integrated in chassis, for the ramps ----Tyres: * Tyres: 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanised * Axles, springs, air tank and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Side wall paintwork available in other RAL colours at extra charge ----Info: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale ----Delivery time: Available immediately ex Egestorf Kedpfx Akol Th Htjwolt