Faymonville Paluba Plavidla Faymonville G-Modul kúpiť použité (32 860)

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment Bedpfx Aohlz S Nohqeli •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Bjdpfxjup U Hzs Ahqoli Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides - Load manometer for determining the axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 9 450 kg, maximálna hmotnosť nákladu: 35 550 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 500 mm, šírka ložného priestoru: 1 560 mm, celková šírka: 2 550 mm, veľkosť pneumatiky: 385/65 R 22,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck designed as load platform with aluminium chequer plate covering - Front edge bevelled at approximately 45° - Hydraulic lifting rocker, approx. -280/+250 mm lift and lower range - Two king pin positions at centres 2,300 mm and 2,000 mm - Suitable for tractor units: 4x2, 6x2 or 6x4 Loading bay: - Loading bay, approx. 9,500 mm length, equipped with bottom-mounted angle profiles for pallet loading (distance king pin to centre of axle assembly approx. 8,000 mm) Axles, suspension and tyres: - BPW axle stubs with drum brakes and independent wheel suspension, hydraulic axle balancing with lifting and lowering function - Lowering safety devices on the axles in case of air spring rupture, designed for maximum pallet height of 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure monitoring sensors fitted in all wheels including spares - TPMS system compliant with ECE R 141 Surface treatment: - Complete steel construction wheelabrated after welding - Second abrasive blasting with corundum for optimum coating adhesion - Full chassis HRM metallised with ZINACOR 850 (85% zinc/15% aluminium) to ensure premium corrosion protection - Final paint finish with two coats of two-component topcoat, solid colour in Nova Grey (DB 7350) - Paint structure tested by salt spray test in accordance with ISO 9227-NSS, cavity sealing with special wax Standard accessories included: - Plug-in steel headboard, approx. 400 mm high - Toolbox with lid, countersunk at rear of gooseneck, approx. 640 x 700 x 215 mm - Removable ALU rear panel on gooseneck, approx. 400 mm high, anodised - One pair of foldable ALU sideboards on gooseneck, approx. 400 mm high, anodised - 2" king pin - 3 pairs of recessed lashing rings on gooseneck (LC 6,300 daN) - Front connection panel fitted with yellow-red air couplings, illumination for operating gooseneck, suspension and hydraulic tensioning with on/off switch - Mechanical drop-leg supports for approx. 48,000 kg support load - Access ladder mounted at front right with 2 removable handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings on main beams (LC 6,300 daN) - Main beams with flush-fit grating deck between load securing guide rails - Hydraulic pre-installation including control unit for mounting 3 pairs of our hydraulic load securing devices - First and last axles liftable manually left and right Bodpfx Aeygvc Hshqeli - Storage box behind axle assembly, left and right, splashproof - Rear bevel for easier pallet insertion - Rear crossmember fitted with eyes for mechanical load restraining - 7-pin socket at rear crossmember - Electro-hydraulic power unit - 4 wheel chocks with holders - 2 axle load gauges fitted on left, including axle load diagram - 3 pairs of hydraulic load securing arms, pivoting and adjustable on main beams - Rear door with diagonal bracing, hinged left, hydraulically locked right, can be locked horizontally at 90°, 105° and 270° - Folding underrun protection for transport of max. 4 empty standard pallets - 1 spare wheel - Number plate bracket with illumination, rear left on trailer - Round NATO socket at front connection panel (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX make, standard grease version

Stav: nový, pohotovostná hmotnosť: 12 300 kg, maximálna hmotnosť nákladu: 37 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism - Maximum load per pair: 30,000 kg Loading platform: - Loading area with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm thick hardwood flooring, patterned steel plate covering above the axles Axles and tires: - BPW axles and suspension, two fixed axles, one self-steering axle - Air suspension with lifting and lowering valve - The self-steering axles can be locked via electromagnetic reverse gear interlock or manually - 235/75 R17.5 3PMSF tires Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - Mounts at the rear end of the gooseneck for ALU loading ramps - 3-height ALU boards - Galvanized folding supports under the chamfered loading area - Height-adjustable tarpaulin body (3,960 mm) - Galvanized headboard with a tensioning mechanism for the sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof movable forwards on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading area - The superstructure is hydraulically extendable to the left and right at the rear by approx. 750 mm - Sliding roof with upward-swinging portal beam - Sliding tarpaulin with a 700 mm surplus in length, tensioning straps spaced approx. 600 mm - Height of the top edge of the superstructure approx. 3,960 mm - Operation with roof open is not permitted and will damage the tarpaulin - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic power pack at rear, under the loading platform - Holders for warning signs including socket outlets at the gooseneck and at the ramps, left and right Blsdpfx Astvfkfjhqoi - Ramp control valves mounted on the trailer's right side - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Lifting axle on the front axle - Grating surface in the sloped part of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, right side in driving direction between the axles - Painted sand layer on checker plates on the gooseneck and loading platform as slip protection - BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump guard - Four pull-out warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, with position lamp - Load gauge for axle load determination including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-peened, then specified visible surfaces hot finished with ZINACOR 850 metallization (Zinc 85% - Aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit Bedpfx Ahjwcmhajqsli - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 10 300 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform hydraulically liftable and lowerable after the gooseneck, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° - Cut-outs in the outer frame for lashing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension & Tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tyres 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of front wall - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized front connector rail - 4 wheel chocks - Galvanized folding supports under the rear slope of the loading platform - Bracket for beacon at the rear of the trailer - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on the trailer sides, and red at the rear Bsdpfx Ahou Hp Hroqeli - Electro-hydraulic unit at the rear under the loading platform - On the gooseneck and ramps left and right, each a bracket for warning signs, incl. socket - Control valves for ramps fitted on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized stake pockets are removable (body length approx. 2,560 mm) - An electric winch with radio remote control, approx. 5,400 kg lifting force, incl. 9.5 mm steel cable, 24 m long, with cable guide roller - Bolted 5t ring for rope winch cable diversion on the neck without guide pulley - 2 pairs of WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Lift axle on front axle, controlled by TEBS E, depending on current axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear bevel along the central beam (LC 10,000 daN) - Non-slip sand coating applied on the checker plates on the gooseneck and platform - Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard - Four extendable warning signs, approx. 400 mm, each 423 x 423 mm - Speed restriction stickers 80 km/h on the rear and both sides - Load pressure gauge for determining axle loads, incl. load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot metallization

Stav: nový, pohotovostná hmotnosť: 13 500 kg, maximálna hmotnosť nákladu: 51 500 kg, celková hmotnosť: 69 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading platform length; length approx. 3,700 mm. Gooseneck rear bevel approx. 1,000 mm x 10°. Loading platform: Telescopic loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°. Recess in the bevel as well as extending into the loading platform to accommodate the excavator's bucket linkage. Pneumatic locking with conical bolt and reinforced lock positions. Supply lines are protected within the telescopic beam and adapt to the respective platform length. Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm. Hydraulically folding ramp tips. Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward. Axles and suspension: BPW axles and suspension, two rigid axles, two self-steering axles. Electromagnetic reverse lockout, activated via reverse gear and manually. Air suspension with raise/lower valve. Axle tools. Tyres: 235/75 R17.5 3PMSF, dual-mounted. Load index: 143/141J (144/144F). Braking system: WABCO brand braking system, EBS-E, compliant with EU regulations. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED." Metal finishing: Standard HRM metallization of the outer frame. Complete steel structure shot-blasted, then all defined visible surfaces hot-coated with ZINACOR 850 (zinc 85% - aluminum 15%). Steel structure: Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified to DIN-EN 287-1. MAG welding method according to EN ISO 4063. Protective gas M21 according to EN ISO 14175. Standard accessories included: Removable front wall, steel, height approx. 400 mm. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, & 15-pin sockets. 24N connection per ISO-118524S connection per ISO-373115-pin connection per ISO-12098. Round NATO socket at the front connection strip. Power cable for supplying the electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and truck tractor with connector (NATO-NATO). 3 kW electro-hydraulic unit for operating hydraulic functions, except hydraulic winches. 1 spare wheel with mounting adapter. Blodpfxjk Ahugs Ahqoi External beam of gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included. Fixing hole at the upper rear of the gooseneck external beams for a bolted lashing ring. 1 pair of screw-in lashing rings. Approx. 40 mm thick hardwood flooring over the gooseneck. On the gooseneck, 1 pair of removable, anodized aluminum sideboards, approx. 400 mm high. On the gooseneck, 1 removable anodized aluminum rear wall, approx. 400 mm high. 2” king pin. Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide. 4 wheel chocks with holders. Mount for aluminum approach ramps. Mechanical landing legs with 2-speed gearbox and crank. Approx. 50 mm hardwood floor, continuous on the platform and interrupted between the axles. Platform locking with conically welded locking profiles every 250 mm, including pre-tensioning plate. Long holes at the front of the loading platform for hook-in and relocatable bridging elements. 1 intermediate table with recessed platform, approx. 300 mm wide for the extension tube with large cross-section with steel covering. Front and rear with long holes...

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Bljdpjh Hm Thsfx Ahqoi Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing

Stav: nový, pohotovostná hmotnosť: 17 250 kg, maximálna hmotnosť nákladu: 48 700 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 17 250 kg, Výbava: ABS, Labutia tyč (Schwanenhals): - Labutia tyč v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm - Hydraulicky zdvíhateľná/spúšťateľná a zjazdná labutia tyč - Pre ťahače: 6 x 4 a 8 x 4 (alebo 6 x 4 s voliteľným jednoosovým dolly) Nízka ložná plocha (Tiefbett): - Nízka ložná plocha s vonkajšími nosníkmi, vyhotovená ako teleskopický most na kotly v nízkom prevedení s výsuvom vpredu - Rozmery: dĺžka x šírka cca 7 550 mm x 2 740 mm - Mechanické uzamykanie výsuvu Podvozok: - Zadný podvozok s uzavretým vonkajším rámom - Rebrovaný plechový povrch a priebežná prizmatická výrezová „baggermulda“ cca 1 450/900 x 505 mm, vzadu otvorená Nápravy, pruženie a pneumatiky: - „PENDEL-AXLE“ – všetky nápravy sú hydromechanicky riadené - Ventil proti prasknutiu hadíc na vyrovnávacích valcoch náprav s automatickou funkciou RESET - Hydraulické valce s uzatváracími kohútikmi a predpínačmi na zaistenie vo zdvihnutej polohe - Záverečný lak náprav: 2 vrstvy dvojzložkového laku v jednotnej farbe „FAY-Grau-34-0260“ - Technická nosnosť nápravy: 12 000 kg - Hydraulické vyrovnávanie záťaže na nápravy - Pneumatiky: 245/70 R 17.5 Príslušenstvo: - Predná stena z ocele, zasúvateľná, výška cca 400 mm - 4 ks kliny pod kolesá - Zadná horná časť labutej tyče zakrytá odnímateľným krytom - 1 pár oceľových nájazdových rámp so slikrami a upevňovacími kolíkmi pre mostíky na uchytenie do nízkej ložnej plochy - Rampy je možné položiť nad alebo medzi háky - Možnosti upevnenia oceľových nájazdových rámp vzadu medzi vonkajšími nosníkmi labutej tyče - Zaisťovacie miesta každých cca 1 000 mm na výsuve - 1 upevňovací krúžok vľavo a vpravo na prednom priečniku - Pripojovací panel pre napájacie vedenia k ťahaču, umiestnený na úrovni vonkajšieho rámového profilu - 6 párov závitových blokov na vonkajšej strane vnútorných nosníkov ložnej plochy pre montáž skrutkovacích krúžkov M24 - 6 párov zapustených upevňovacích krúžkov na vonkajšej strane vonkajších nosníkov ložnej plochy, sklopné dovnútra aj von - 1 pár závitových blokov vpredu a vzadu na vonkajších nosníkoch ložnej plochy pre montáž skrutkovacích krúžkov M24 - Závesná lišta pre voľné hliníkové nájazdové rampy na zadnom priečniku vozidla - Centrálne mazanie s dvoma čerpadlami značky BEKAMAX - Riadenie zadnej nápravy vpredu aj vzadu, ovládateľné káblovým diaľkovým ovládaním s kontrolou zarovnania náprav - 3 kW elektrohydraulická jednotka na ovládanie hydrauliky (okrem hydraulických navijakov) - Vyberateľná ložná podlaha (pozinkovaná), 3 diely medzi vonkajšími nosníkmi, s tvrdým drevom - Výklopné rozširovacie dosky cca 230 mm na každú stranu - Voľne položené rozširovacie dosky, s oceľovým rámom - 4 výstražné tabule cca 423 x 423 mm - Rádiové diaľkové ovládanie pre riadenie zadnej nápravy - 3,5'' kráľovský čap (königszapfen) - Protišmykový povrch na ľavom zrážaní labutej tyče - Hydraulické prípojky medzi labuťou tyčou a nízkou ložnou plochou s multispájacou namiesto skrutkových spojov - Vodiaca platňa labutej tyče pre sedlový čap, cca 800 mm široká - 1 rezervné koleso s držadlom - Parkovacie miesto na labutej tyči pre výstražné tabule pri nevyužití - 2 páry vreciek na kolíky zapustené v vonkajšom ráme podvozku pre zasúvacie kolíky cca 100 x 50 mm - Výrez lyžicovej tyče zadného podvozka vzadu uzatvorený zasúvateľnou doskou - Farba návesu: MB 7350 Novagrau Bjdpfx Ash Hm Tzshqoli

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Bedpfxoh Etf Rj Ahqoli Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm Blodpfx Aehlz R Sehqji - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Bsdpfx Ahotphtmoqsli Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Bjdpfxewhywfe Ahqeli Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Bedpjk Af Svsfx Ahqoli Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear Chassis: - Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tyres: - "PENDLE-AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position - Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS tire pressure sensors mounted in all wheels including spare wheels Accessories included: - Plug-in front wall made of steel, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - One spare wheel with mounting adapter - Outer beams on gooseneck with mounting holes for bolted lashing rings - Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized - Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized - Checker plate cover above the gooseneck - Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area on gooseneck illuminated with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - Rear upper part of the gooseneck closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed - Ramps can be placed over or between the hooks - Mounting provision for steel ramps at the rear between the outer beams of the gooseneck - Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams - Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrally painted anti-slip sand layer - Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering - Folding wideners, approx. 230 mm per side - Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed - 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm - Hanging bar for loose ALU ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps Bledjvy Edcspfx Ahqsi - Radio and cable remote control - 4 warning signs, approx. 423 mm x 423 mm, extendable - Extensive lashing positions

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Bjdpjmfqi Iofx Ahqjli Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer Blsdpfx Aheiu Etksqei - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 700 kg, dovolené zaťaženie nápravy (náprava 2): 10 700 kg, povolené zaťaženie nápravy (náprava 3): 10 700 kg, prvá registrácia: 03/2013, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17.5, farba: červená, Rok výroby: 2013, = Further Options and Accessories = - Air suspension = Notes = Faymonville Euro low loader with detachable gooseneck for sale Specifications Bjdpfeyw Sxtsx Ahqsli 4 wheel recesses, each 2 meters Width: 2.55 m Extendable width: 0.25 m Low bed: 8 meters Deck above axles: 4.30 m Gooseneck top: 3.10 m Loading height (driving position): 0.50 m German registration Tyres: 80 percent SAF axles 3 steered axles Robust and well-maintained low loader, immediately ready for heavy-duty transport. = Further Information = Axle configuration Tyre size: 235/75R17.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 3: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Weights Unladen weight: 14,700 kg Payload: 17,400 kg Gross vehicle weight: 32,100 kg Condition Technical condition: good Visual condition: good Product safety Manufacturer: Faymonville BE Further Information Please contact Gerrit Haverhoek for more information.

Stav: nový, maximálna hmotnosť nákladu: 40 320 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú našu ponuku vozidiel, vrátane okamžite a krátkodobo dostupných modelov, nájdete na našej webovej stránke. Výňatok z výbavy. Kompletná výbava na vyžiadanie. Husí krk: * Husí krk so zadným zrazením cca 750 mm x 10°. 3 páry upevňovacích ôk (LC 5 000 daN) * Doska z tvrdého dreva cca 30 mm hrubá. Nakladacia plocha s 5 pármi výklopných upevňovacích ôk (LC 5 000 daN) * 3 páry výklopných upevňovacích ôk (LC 10 000 daN) * 1 pár ležiacich upevňovacích ôk vpredu na nakladacej ploche (LC 10 000 daN) * Doska z tvrdého dreva cca 48 mm hrubá, nad nápravami vrúbkovaný plech Podpery sedla: JOST sedlové podpery (manuálne) s dvojrýchlostnou prevodovkou pre zdvíhaciu hmotnosť cca 24 t (skúšobná záťaž cca 50 t) Pneumatiky: * Pneumatiky 205/65 R17.5 – výrobca podľa nášho výberu TPMS: * Systém na kontrolu tlaku v pneumatikách podľa ECE R 141 Nápravy: * BPW nápravy, dve pevné a dve samo-natáčacie nápravy * Vzduchové pruženie s funkciou zdvíhania/spúšťania * Bubnové brzdy * Samonatáčacie nápravy s elektromagnetickou spiatočkovou blokáciou aktivovateľnou spiatočkou alebo manuálne Brzdový systém: * WABCO brzdový systém podľa predpisov EÚ s EBS-E (4S3M) Elektrická výbava: * Elektrická inštalácia podľa predpisov EÚ, LED osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * Všetky LED bočné obrysové svetlá blikajú so smerovkou * ASPÖCK-UNIBOX na prednej spojovacej lište so zásuvkami 24N, 24S & 15-pinový konektor podľa ISO. 24N ISO-1185 24S ISO-3731 15-pinový ISO-12098 Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí * Triedy ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lak: * HRM metalizácia celého podvozku vozidla s použitím ZINACOR 850 (85 % zinok/15 % hliník) pre najlepšiu antikoróznu ochranu * Farba návesu RAL 3002 karmínová červená Bsdpey Aug Dofx Ahqoli * Disky v striebornej sivej * Plachta v RAL 9006 (lesklá priama) Možnosti vrátane: * Na husom krku a na zadnej časti vľavo a vpravo držiak na výstražné tabule vrátane zásuvky * 2-palcový kráľovský čap * Pozinkovaná oceľová čelná stena * Na pozinkovanej prednej spojovacej lište žlto-červené vzduchové spojky * 4 ks zarážky kolies s držiakom na čelnej stene * 3 úrovne drevených lát * Pozinkované sklopné podpery pod zadným sklonom nakladacej plochy * Držiak na výstražný maják na zadnej časti návesu * Výškovo nastaviteľná konštrukcia plachty ~3 960 mm * Pozinkovaná čelná stena s napínacím mechanizmom pre posuvné plachty, výškovo nastaviteľná asi o 400 mm * Strecha značky EDSCHA, posuvná dopredu po ALU strešných profiloch (zadná a predná stena zaskrutkovaná) * Na nakladacej ploche 3 páry posuvných bočníc * Nadstavba vzadu hydraulicky rozšíriteľná na ľavú a pravú stranu o cca 750 mm * Posuvná strecha s výklopným portálovým nosníkom * Posuvná plachta s rezervou 700 mm na dĺžku, s napínacími pásmi v cca 600 mm rozostupoch. Výška hornej hrany nadstavby cca 3 960 mm (pri nakladaní) * Jazda s otvorenou posuvnou strechou nie je povolená, vedie k poškodeniu plachty * Nadstavba vzadu s eloxovanými ALU krídlovými dverami uzavretá * Závesná lišta pre ALU nájazdové rampy na zadnej časti vozidla * Ovládacie ventily pre hydraulické rozširovanie nadstavby umiestnené vpravo na návesovej strane * Biele reflexné pásky podľa predpisov EÚ po bokoch a vzadu červené * Elektro-hydraulická jednotka vzadu pod nakladacou plochou * Blatník na zadnej časti návesu * Európske reflexné tabule (červeno-žlté) na zadnej časti návesu * Ručne

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park, včetně vozidel ihned a v krátkém termínu dostupných, najdete na našich webových stránkách. Výňatek z výbavy. Kompletní specifikace na vyžádání. Labutí krk: * Labutí krk se zadní šikminou cca 750 mm x 10° * 3 páry upínacích ok (LC 5 000 daN) * Podlaha z tvrdého dřeva cca 30 mm silná Ložná plocha: * Ložná plocha se zadní šikminou cca 1 000 mm x 8° * 5 párů výklopných upínacích ok směrem ven (LC 5 000 daN) * 3 páry výklopných upínacích ok směrem ven (LC 10 000 daN) * 1 pár ležících upínacích ok vpředu v ložné ploše (LC 10 000 daN) * Podlaha z tvrdého dřeva cca 48 mm silná, přes nápravy podlaha z nerezového plechu s protiskluzem Dvoudílné ocelové nájezdy: * Jeden pár žárově zinkovaných dvoudílných ocelových ramp, cca 3 185 + 1 420 x 1 250 mm, s roštem C40/5 (bodové zatížení cca 2,8 t na ploše cca 20 x 20 cm) * Rampa s hydraulicky výklopnými a sklápěcími díly a hydraulickým zvedacím mechanismem * Maximální zatížení na pár: 30 000 kg Opěrné nohy: * JOST opěrné nohy (mechanické) s dvourychlostní převodovkou pro cca 24 t nosnost (cca 50 t testovací nosnost) Blsdpfx Asy Auhuehqsi Nápravy: * BPW nápravy a zavěšení, 2 nápravy tuhé, 1 řízená dojezdová náprava * Technická kapacita nápravy: 12 000 kg každá * Elektromagnetická couvací zábrana ovládaná zpátečkou a manuálně * Pneumatické pérování s ventilem pro zvedání a spouštění Obutí: * Pneumatiky 235/75 R 17.5 3PMSF - značka dle našeho výběru TPMS: * TPMS systém monitorování tlaku v pneumatikách dle ECE R 141 Brzdový systém: * WABCO brzdová soustava dle EU předpisů s EBS-E (2S2M) bez propojovacích vedení k tahači Ocelová konstrukce: * Ocelová konstrukce z vysokopevnostních jemnozrnných ocelí * Ocelové třídy: S355J2+N/S355MC (mez kluzu 355 MPa), S690QL/S700MC (mez kluzu 690 MPa) Elektrická výbava: * Elektrická soustava dle EU předpisů, LED osvětlení 24 V ASPÖCK-NORDIK (ASS3) * Všechny LED poziční svítilny blikají společně s ukazatelem směru * ASPÖCK-UNIBOX na předním přípojném panelu se zásuvkami 24N, 24S a 15 pólů dle ISO (24N ISO-1185, 24S ISO-3731, 15 pól ISO-12098) Lakování: * HRM-metalizace (žárové stříkání) celého podvozku vozidla ZINACOREM 850 (85 % zinek / 15 % hliník) pro nejlepší ochranu proti korozi * Konečný nátěr: 2 vrstvy dvousložkového vrchního laku, jednobarevně RAL 3002 karmínová červeň dle systému RAL 841GL * Zadní část vozidla metalizovaná a lakovaná v RAL 9010 (čistě bílá) * Disky stříbrné Vč. příslušenství: * Na labutím krku a na zádi vlevo i vpravo vždy držák na výstražné tabule včetně zásuvky * 1 držák rezervního kola pod ložnou plochou vpravo ve směru jízdy * 2“ královský čep * Jedna pozinkovaná ocelová čelní stěna * Na přední pozinkované přípojnici žluto-červené vzduchové spojky * 4 ks klínů s držáky na čelní stěně * 3 výškové dřevěné desky * Pozinkované sklápěcí podpěry pod šikminou ložné plochy * Držák pro maják v zadní části návěsu * Výškově stavitelná konstrukce pro plachtu, výška cca 3 960 mm * Pozinkovaná čelní stěna s napínacím mechanismem pro posuvné plachty, výškově stavitelná cca o 400 mm * Střecha značky EDSCHA posuvná dopředu po ALU střešních profilech (přišroubováno k přední a zadní stěně) * V ložné ploše 3 páry posuvných sloupků * Konstrukce je vzadu hydraulicky rozšiřitelná vlevo i vpravo cca o 750 mm * Posuvné zakrytí s výklopným portálovým nosníkem * Posuvná plachta s rezervou cca 700 mm na délku, s upínacími pásy v rozestupech cca 600 mm.

Stav: nový, maximálna hmotnosť nákladu: 37 980 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Celú našu aktuálnu ponuku vozidiel s okamžitou a krátkodobou dostupnosťou nájdete na našej webovej stránke. Výber zo špecifikácie. Kompletnú špecifikáciu poskytneme na vyžiadanie. Labutí krk: * Labutí krk so skosenými rohmi vpredu cca 45° a so zadným skosením cca 750 mm x 10° * 3 páry upevňovacích krúžkov (LC 5 000 daN) * Povrch z tvrdého dreva hrúbky cca 30 mm Nákladná plocha vo vyťahovateľnom vyhotovení: * Nákladná plocha vo vyťahovateľnom prevedení so zadným skosením cca 1 000 mm x 8° * 6 párov výklopných upevňovacích krúžkov smerom von (LC 5 000 daN) * 3 páry výklopných upevňovacích krúžkov smerom von (LC 10 000 daN) * 1 pár ležiacich upevňovacích krúžkov vpredu na plošine (LC 10 000 daN) * Výrezy v vonkajšom ráme plošiny na upnutie upínacích pásov (LC 2 000 daN) * Povrch z tvrdého dreva, hrúbka cca 48 mm, nad nápravami protišmykový plech Sklopné oporné nohy: * JOST oporné nohy (mechanické) s dvojrýchlostnou prevodovkou pre cca 24 t zdvíhacej sily (cca 50 t skúšobnej sily) Pneumatiky: * Pneumatiky 235/75 R 17.5 3PMSF, značka podľa nášho výberu TPMS: * Systém monitorovania tlaku v pneumatikách podľa ECE R 141. Prenos údajov do ťažného vozidla cez štandardizované EBS rozhranie podľa ISO 11992. Pre správne zobrazenie musí byť ťažné vozidlo schopné tieto údaje prenášať a zobrazovať. Nápravy: * BPW nápravy a zavesenie, 2 tuhé nápravy, 1 riadená zadná náprava * Technická nosnosť nápravy: 12 000 kg každá * Elektromagnetická zábrana cúvania aktivovateľná spiatočkou a manuálne * Vzduchové odpruženie so zdvíhacím a znižovacím ventilom * Náradie k náprave Brzdový systém: * Brzdový systém v súlade s predpismi EÚ s EBS-E (2S2M) bez prepojovacích vedení k ťažnému vozidlu Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí * Druhy ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lakovanie: * Celá oceľová konštrukcia po zváraní automaticky otryskaná pomocou tryskacieho zariadenia * Druhé otryskanie korundom pre optimálnu priľnavosť náterového systému * Konečný náter 2 vrstvami 2K lakom, jednofarebný podľa RAL 3002 karmínová červená, podľa RAL systému 841GL * Disky v striebornej sivej * Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) * Lakovanie testované v soľnej komore podľa ISO 9227-NSS * Utesnenie dutín špeciálnym voskom Elektrická inštalácia: * Elektrická inštalácia podľa predpisov EÚ, osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * Všetky LED bočné obrysové svetlá blikajú súčasne so smerovkami * ASPÖCK-UNIBOX na prednej prípojnici so zásuvkami 24N, 24S & 15-pólovou zásuvkou podľa ISO. 24N ISO-1185 24S ISO-3731 15-pólová ISO-12098 Príslušenstvo v cene: * 2-palcový kráľovský čap * Jedna pozinkovaná oceľová predná stena, výška cca 400 mm * Jeden držiak rezervnej pneumatiky pred prednou stenou * Na pozinkovanej prípojnici vpredu žlto-červené vzduchové spojky * 4 ks klinov s držiakmi na prednej stene * Úchyt v zadnej časti labutieho krku pre ALU-nájazdové rampy * Pozinkované sklopné opory pod skosením plošiny Bledjy Aufmspfx Ahqei * Na labutiom krku aj na zadnej časti vľavo a vpravo držiak pre výstražné tabule vrátane zásuvky * Manometer na meranie zaťaženia náprav vrátane diagramu * Na labutom krku hliníkové bočné a zadné steny, nasúvacie, cca 2 440 x 400 mm (d x v). Zadné pozinkované nasúvacie stĺpiky sú odnímateľné (dĺžka nadstavby cca 2 560 mm) * Jedna pozinkovaná náradňová schránka integrovaná do skoseného labutieho krku * 3 páry WADER C

Stav: nový, maximálna hmotnosť nákladu: 38 953 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, MAX100-N-3B-9.30-U Technické údaje Rýchlosť: 80 km/h Celková hmotnosť: 49 500 kg Sedadlová zaťaž: 18 000 kg Zaťaženie náprav: 31 500 kg Prevádzková hmotnosť (+/- 3%): 10 547 kg Užitočné zaťaženie približne: 38 953 kg Dĺžka labutieho krku: 3 850 mm Výška sedla naložená: 1 200 mm Dĺžka ložnej plochy: 9 300 mm Výsuvné o: 0 mm Rázvor náprav: 1 360 mm Polomer prehnutia dozadu: 2 300 mm Výška ložnej plochy pri max. zaťažení: 860 mm Celková šírka: 2 540 mm Rozsah odpruženia: -55/+145 mm Technický popis Labučí krk: Labučí krk so zkosenými rohmi vpredu pod uhlom 45° a zadným zkosením cca 750 mm x 10°. 3 páry uchytných krúžkov (LC 5 000 daN). Tvrdé drevené obloženie, hrúbka 30 mm. Ložná plocha: Za labučím krkom hydraulicky zdvíhateľná a spustiteľná plocha, dĺžka cca 2 800 mm, so zadným zkosením cca 1 000 mm x 8°. 6 párov smerom von skladateľných upevňovacích krúžkov (LC 5 000 daN). 2 páry smerom von skladateľných upevňovacích krúžkov (LC 10 000 daN). 1 pár zvnútra skladateľných upevňovacích krúžkov v prednej časti centrálneho nosníka (LC 10 000 daN). Výrezy vo vonkajšom ráme ložnej plochy na zavesenie napínacích pásov (LC 2 000 daN). Tvrdé drevené obloženie približne 48 mm silné, cez nápravy ryhovaná plechová podlaha. Rampa: Dvojdielne oceľové rampy. Jedna sada pozinkovaných dvojdielnych oceľových rámp cca 2 750 + 1 400 x 800 mm s cca 48 mm silným tvrdodreveným obložením. Rampy s hydraulicky sklopnými časťami rampy, hydraulickým zdvíhacím zariadením a hydraulickým posuvom. Maximálne zaťaženie na pár: 40 000 kg Oporné nohy: JOST oporné nohy (mechanické) s 2-stupňovou prevodovkou na zdvih 24 t (testovaná nosnosť 50 t). Pneumatiky: Pneumatiky 235/75 R 17.5 podľa výberu výrobcu. Náprava: SAF nápravy, vzduchovo odpružené, s bubnovými brzdami, so zdvíhateľnou/spúšťateľnou funkciou. Posledná náprava je riadená s elektromagnetickou blokáciou spätného chodu, aktivovaná spätným chodom alebo manuálne. Náradie k náprave. Brzdový systém: Brzdový systém v súlade s predpismi EÚ, s EBS-E (2S2M) bez prepojovacích línií k ťažnému vozidlu. Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí. Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Lak: Prvotriedna a trvácna antikorózna ochrana štandardne tryskaného rámu zvareného rámu zaručená 2K zinkovou základnou farbou. Kvalitný 2K vrchný lak v jednoliatej farbe podľa RAL vzorkovníka podľa výberu. Zadná časť kovovo pokovovaná a lakovaná v RAL 9010 (čistobiela). Metalický lak nie je možný. Elektroinštalácia: Elektroinštalácia podľa predpisov EÚ, LED osvetlenie 24 V ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX na pripojovacej lište vpredu so zástrčkami 24N, 24S & 15 pól. Pripojenie podľa ISO: 24N ISO-1185 Bjdpfx Ajg Sk Trehqoli 24S ISO-3731 15 pólové ISO-12098 Príslušenstvo v cene: 2" kráľovský čap Pozinkovaná oceľová čelná stena cca 400 mm vysoká. Na pozinkovanej pripojovacej lište vpredu žlto-červené vzduchové spojky. 4 kusy klátikov s držiakom na čelnej stene (± 5 kg) Kábel na napájanie elektrohydraulického agregátu a/alebo elektrického lanového navijaka (35 mm², 3,5 m dĺžka, max. 250A) medzi návesom a ťažným vozidlom so zástrčkovým spojením (ANDERSON-ANDERSON) Pozinkované skladacie oporné nohy pod skosením ložnej plochy. Držiak na výstražné majáky vzadu na návesu. Ovládacie ventily pre rampy umiestnené na pravej strane návesu (± 4 kg) Žltý reflexný pás podľa predpisov EÚ po stranách a vzadu na návesu. Elektrohydraulický agregát vzadu pod ložnou plochou (± 45 kg) Na labuťom

Stav: nový, celková hmotnosť: 58 000 kg, Rok výroby: 2026, Low-bed Semi-Trailer MAX100 4 A 8.60 U Technical Data Maximum speed: 80 km/h Gross weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded coupling height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55 / +145 mm Technical Description Blodpfeg Sk T Dox Ahqoi Gooseneck: With front corners chamfered at 45°, rear taper approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) 30 mm strong hardwood flooring Extendable loading platform Rear taper approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000) Approx. 48 mm thick hardwood flooring, over the axles checker plate Ramps: Two-piece steel ramps One pair galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting device, and hydraulically movable Maximum load per pair 40,000 kg Tyres: 235/75 R 17.5 Brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame ensured by two-component zinc-rich primer High-quality two-component (2K) topcoat, single color, in RAL color of your choice Rear section metalized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox, rated for 24t lifting capacity (50t test load) Steel Construction: High-strength fine grain steel construction. Steel grades: High-strength fine grain steel S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, ISO compliant 24N IS0-1185 24S IS0-3731 15 pin IS0-12098 Included Accessories: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder at the front wall Bracket for a revolving beacon at the rear of the trailer SAF axles, two rigid, one trailing-steered, air suspension, drum brakes, with lift/lower function Trailing steering axle with electro-magnetic reverse lockout activated via reverse gear or manually Axle tools Mount at the rear of the gooseneck for ALU approach ramps Galvanized folding supports under the loading platform’s taper Mechanical locking of the loading platform One spare wheel with holder in front of the front wall Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer Yellow-red air couplings on galvanized terminal strip at the front At the gooseneck and rear plate, left and right, each a bracket for warning plates including socket One mudflap at the rear of the trailer Manual and documentation Plug-in ALU side walls and end wall approx. 2,440 x 400 mm (L x H) for the gooseneck Rear removable galvanized stakes Superstructure length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container pockets in the loading platform for one 20', 30’, or 40’ container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stav: nový, maximálna hmotnosť nákladu: 36 461 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 480 mm, celková výška: 860 mm, Rok výroby: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN). 1 pair of fold-out lashing rings on the inside at the front center beam (LC 10,000 daN). Grating surface C40/4 (point load 2.3 tons on an area of 20 x 20 cm), tread plate covering above the axles. Two-Part Steel Ramps: One pair of galvanized two-piece steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 tons on an area of 20 x 20 cm). Ramp with hydraulically folding ramp sections, hydraulic lifting device. Maximum load per pair: 40,000 kg. According to Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm in transport position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load). Tyres: 235/75 R17.5 3PMSF tyres as per manufacturer's choice. TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle is via the standard EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Electrical System: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) LED lighting. All LED side marker lamps flash with the indicator. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) Bledpfx Aow Dl Hwohqoi S690QL/S700MC (yield strength 690 MPa) Curtainsider Body (Tarp Body): Curtainsider body approx. 3,960 mm - Galvanized front wall with tensioning mechanism for sliding curtains. - Roof by "EDSCHA" brand, forward-sliding on aluminium roof rail profiles (bolted to front and rear walls). - 3 pairs of movable stanchions in the loading area. - Rear hydraulically extendable left and right by approx. 750 mm. - Sliding roof with foldable portal support. - Sliding curtain with 700 mm reserve length, lashing straps at approx. 600 mm intervals. - Height of upper edge (loaded): approx. 3,960 mm. - Driving with open sliding roof is not permitted and will damage the tarp. Paintwork: Entire steel structure is automatically shot-blasted using a turbine after welding. Second blasting with corundum for optimal adhesion of coating system. HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection. Final coating with 2 coats of 2K finish paint, single color in a shade of choice according to RAL system 841GL. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.

Stav: nový, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, Technické údaje MAX510-Z-2H-ATX-A-6.85-PA Rýchlosť: 80 km/h Celková hmotnosť: 47 000 kg Sedadlové zaťaženie: 23 000 kg Zaťaženie nápravy: 24 000 kg Dĺžka labutím krkom: 3750 mm Sedlová výška zaťaženého vozidla: 1200 mm Polomer pretáčania dozadu: 2300 mm Dĺžka ložnej plochy: 6 850 mm Výsuvná o: 5 500 mm Blodpfxsizu Nwo Ahqoi Ložná výška pri maximálnom zaťažení: 350 mm Dĺžka podvozku: 2 600 mm Ložná výška zadného podvozku pri maximálnom zaťažení cca: 1 005 mm Pružná dráha: -150/+450 mm Rázvor: 1360 mm Celková šírka: 2 540 mm Celková hmotnosť závisí od sedadlového zaťaženia. Spodná plošina: Spodná plošina s vonkajšími nosníkmi v výsuvnom prevedení "SUPER LOW" dizajn, dĺžka cca 6 850 mm. Spodná plošina s pevným tvrdodrevným podkladom cca 40 mm hrubým a mechanickým zaistením. Napájacie vedenia sú chránené vo výsuvných nosníkoch a automaticky sa prispôsobujú aktuálnej dĺžke spodnej plošiny. 5 párov sklápacích viazacích krúžkov vonku (LC 10 000 daN). 6 párov závitových blokov na vnútornom nosníku na montáž skrutkovateľných RUD krúžkov. Zadný podvozok: Zadný podvozok s uzavretým vonkajším rámom, ryhovanou podlahou a celošírkovou bagrovou vanou cca 1 250/700 x 505 mm, otvorenou vzadu. 2 páry sklápacích viazacích krúžkov (LC 10 000 daN). 1 pár ležiacich viazacích krúžkov v vani (LC 8 000 daN + 5 300 daN). 2 páry vreciek na kolíky pre zasúvacie kolíky 100 x 50 mm vo vonkajšom ráme Labutí krk: Labutí krk v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 785 mm. Labutí krk hydraulicky zdvíhateľný, skladací aj odnímateľný. Technické sedadlové zaťaženie: 23 000 kg Pre ťahače: 4 x 2, 6 x 2 a 6 x 4 PENDEL-AXLE: "PENDEL-AXLE", všetky nápravy hydro-mechanicky riadené. Ventil proti prasknutiu hadice na výkyvnom valci nápravy s automatickou funkciou RESET. Hydraulické valce s uzatváracími kohútikmi a predpripináčom na zaistenie vo zdvihnutej polohe. Konečná povrchová úprava náprav dvoma vrstvami dvojzložkového laku v odtieni „FAY-Grey-34-0260“. Technické zaťaženie nápravy: 12 000 kg Hydraulické vyrovnávanie náprav. Náradie pre nápravy. Brzdová sústava: Brzdová sústava podľa EU smerníc s EBS-E (2S2M) bez prepojovacích vedení k ťahaču. Elektroinštalácia: Elektroinštalácia podľa EU normy, osvetlenie 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX na prednej prípojnici so zásuvkami 24N, 24S & 15 pól. Pripojenie podľa ISO. 24N ISO-1185 24S ISO-3731 15 pólov ISO-12098 Oceľová konštrukcia: Oceľová konštrukcia z vysoko pevných jemnozrnných ocelí. Kvalita ocele: S355J2+N/S355MC (medza klzu 355MPa) S690QL/S700MC (medza klzu 690MPa) Povrchová úprava: Prvotriedna a trvácna antikorózna ochrana štandardne otryskaného zváraného rámu, zaručená dvojzložkovým (2K) zinkovým základom. Kvalitný dvojzložkový (2K) vrchný lak v odtieňoch RAL podľa výberu. Zadná časť metalizovaná a lakovaná v RAL 9010 (čistobiela). Metalický lak nie je možný. Obutie: Pneumatiky 245/70 R 17.5 3PMSF podľa voľby výrobcu. Index nosnosti (146/146F). Príprava na montáž skrutkovateľných kontajnerových pozícií pre 1x 20' alebo 1x 40' kontajner na vonkajších nosníkoch. Bez kontajnerových zámkov. ii2" konštrukcia kingpin iiGalvanizovaná oceľová čelná stena cca 400 mm vysoká. iiRezervné koleso s držiakom pred čelnou stenou. ii2 kusy klinov s držiakom na čelnej stene. iiNa galvanizovanej prednej prípojnici žlto-červené vzduchové spojky. Riadenie zadnej nápravy ovládateľné spredu i zozadu cez káblový diaľkový ovládač s tlačidlami, vrátane kontroly vyrovnania náprav (bez inštalácie v ťahači) Hydraulické prípojky od labut