Faymonville Paluba Plavidla Faymonville G-Modul kúpiť použité (32 799)

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Fpedpsk Eammefx Am Ssg Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: Fpodol Ux Rwopfx Am Sjg - Extendable load platform - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: nový, pohotovostná hmotnosť: 11 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 250 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 r 22,5, farba: sivo-čierny, Výbava: ABS, Loading platform: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles hydro-mechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6-fold tyres, 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Fedpjhlz Shjfx Am Sspg Steel structure: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24V ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) single-colour top coat in novagrey Rear section metallised and painted in RAL 9010 (pure white) No metallic paint possible Accessories included: Mountings for warning plates on the gooseneck and on the rear plate, left and right, each with socket Remote steering operated from the front and rear via cable remote control with push buttons, with axle tracking control Electro-hydraulic unit 4 wheel chocks with holder on the front wall 2" king pin Galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised connection strip at the front White reflective tape according to EU regulations on the sides, on the extension and rear in red European reflector panels (red-yellow) at the rear of the semitrailer One mud flap at the rear of the trailer Manual and description Mounting for a rotating beacon at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles 10 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft container or 1x 40ft container; for 45ft container, an additional locking position is provided in the extension 5 pairs of stanchion rail cross-members mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm One galvanised holder transversely under the platform (2,390 x 720 x 400 mm) Access ladder mounted on the right-hand side in direction of travel One HDPE toolbox 1,200x500x480 at the front under the loading platform, left-hand side in direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and loading condition Central lubrication system with 2 BEKAMAX (Pico) pumps, with standard grease NLGI-2 and removable guard around the pump Red/white reflective tape in the extension of the loading platform Painted sand coating on the central beam as an anti-slip measure Radio remote control for the steering in additi

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Landing legs: - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control Fpjdporq Dlfefx Am Ssg - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: použitý, maximálna hmotnosť nákladu: 65 350 kg, celková hmotnosť: 78 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2020, So vzduchovým odpružením, hydraulickým dvojokruhovým núteným riadením (otočná podpera) - Konštrukcia „plateau“ (balast pre žeriav) - Rohy pravouhlé, uzatvorený vonkajší rám - Predná integrácia riadiaceho mechanizmu v ráme - Otočná sedlová platňa s guličkovou dráhou, s vymeniteľným 3,5" kráľovským čapom a nastaviteľným riadiacim klinom - Sattellast (zaťaženie na krk) 28 000 kg - Zatáčací rádius 2 700 mm Podvozok - 5-nápravový podvozok so vzduchovým odpružením vrátane zdvíhacieho a spúšťacieho ventilu - Nápravy značky SAF - Pneumatiky 445/65 R 22,5 Fedpfx Ajx I U Eqjm Sopg Brzdová sústava - Dvojvodičová celopneumatická brzdová sústava so vzduchovými membránovými valcami - Automatická, záťažovo závislá brzda (ALB) - Automatické nastavovače ťahadiel (AGS) - Parkovacia brzda pomocou pružinových valcov - ABV (ABS) - Možnosť zdvíhania 1. a 2. nápravy (v smere jazdy) Technické údaje Nakladacia plocha (d x š) cca 12 500 x 2 550 mm Spojovacia dĺžka B : 11 550 mm Nakladacia výška podvozka cca 1 490 mm pri výške sedla 1 200 mm Riadenie 1. náprava predbežne riadená 2. náprava pevná 3. – 5. náprava hydromechanicky nútene riadená (dvojokruhové riadenie) Rádio diaľkové ovládanie Elektrická jednotka

Stav: použitý, pohotovostná hmotnosť: 14 100 kg, maximálna hmotnosť nákladu: 33 900 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/1999, zavesenie: vzduch, veľkosť pneumatiky: 235/75 17,5, stav pneumatík: 50 percento, farba: zelený, Rok výroby: 1999, veľkosť prednej pneumatiky: 235/75 17,5, veľkosť zadnej pneumatiky: 235/75 17,5, kabína vodiča: denná kabína, emisná trieda: žiadny, Výbava: registrácia nákladného vozidla, Referenčné číslo pre dopyty: 68574 Faymonville, plošinový náves * Rok výroby: 1999 * Vzduchové odpruženie * Riadená náprava * Nútene riadená náprava * Prípojka vzduchu (červená + žltá) * Pripojovací konektor 2x7-pólový * Zdvihacie a spúšťacie zariadenie Fpjdpfxsyib Ahe Am Ssg * Teleskopický – teleskopický náves * Odpruženie: vzduchové * Celková hmotnosť: 48 000 kg * Pohotovostná hmotnosť: 14 100 kg * Nosnosť: 33 900 kg * Povolená celková hmotnosť: 48 000 kg * Výrobca náprav: SAF * Stav pneumatík 1. náprava: 50% -- 50% – Rozmer pneumatík: 235/75 R17,5 * Stav pneumatík 2. náprava: 50% -- 50% – Rozmer pneumatík: 235/75 R17,5 * Stav pneumatík 3. náprava: 50% -- 50% – Rozmer pneumatík: 235/75 R17,5 * Rozmery pneumatík: 235/75 R17,5 * Výrobca: ES-GE * Výsuv nefunkčný * Riadené nápravy bez funkcie * Pohyblivý Vylúčenie zodpovednosti: Zmeny, predaj počas prevádzky a chyby vyhradené Ďalšie fotografie a videá nájdete na našej webovej stránke. Naša komplexná ponuka služieb zahŕňa napríklad: * Nákup / predaj / prenájom úžitkových vozidiel * Rýchle a jednoduché financovanie * Vypracovanie všetkej (exportnej) dokumentácie * Objednanie exportných ŠPZ / colných ŠPZ * Príprava vozidla: nové plachty, popisy, lakovanie atď. * Profesionálne nakladanie / zabezpečenie nákladu * TüV kontroly, registračné služby * Preprava úžitkových vozidiel Opýtajte sa nášho vyškoleného odborného personálu, radi Vám poradíme.

Stav: nový, celková hmotnosť: 55 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Rok výroby: 2025, Výbava: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Excerpt from the equipment list. Complete specification upon request. CARGO AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Cargo area with double extendable design, length approx. 9,300 mm * On the central beam, a fixed support table approx. 200 mm wide is welded * Pneumatic locking with tapered locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the respective platform length (except for the first locking supply) * Technical king pin load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydraulically/mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires; brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control. Without supply line installation at the tractor unit * 4 pairs of recessed lashing rings on the gooseneck outer frame, foldable outwards * At the king pin, 1 pair of lashing rings (LC 10,000 daN); all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets integrated into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the gooseneck floor for plug-in stakes approx. 100 x 50 mm. 1 at the rear of the gooseneck * 2" king pin * Mechanical landing legs with 2-speed gearbox and hand crank * Approx. 32 mm wooden flooring encased in ALU omega profiles on the gooseneck and cargo area * 10 pairs of recessed lashing rings lying in the cargo area outer frame, foldable outwards: - in front of the last axle and at the trailer end crossmember, one pair each of lashing rings (LC 10,000 daN) - all other lashing rings (LC 5,000 daN) Fedoxc Axxspfx Am Sspg * 8 pairs of stake pockets integrated into the cargo area outer frame for plug-in stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel * Steering from front and rear can be controlled via cable remote, with axle alignment monitoring, without installation into the tractor unit * Steel front wall, approx. 1,800 mm high, certified according to EN12642 : 2016 XL * Circular NATO socket at front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing legs, wired to the tractor unit connection bar * 3 crosswise stake pocket rails mounted in the cargo area floor for plug-in stakes approx. 100 x 50 mm * 1 additional removable intermediate table, approx. 500 mm wide, for the large cross-section pull-out pipe, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel * WADER container pockets in the cargo area for transport of: 1x 20' container at load center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Stav: nový, maximálna hmotnosť nákladu: 48 300 kg, celková hmotnosť: 71 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. Fpedpsyhkqnsfx Am Seg GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in removable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front bevel of approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6x4 or 8x4 * Front steel bulkhead, removable, approx. 400 mm high, in beveled design * 1 pair mechanical landing legs at the front of the gooseneck * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 1 spare wheel carrier inside on the front wall of the gooseneck with a crane arm * 2 pairs of flush-mounted lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of flush-mounted lashing rings in the front external frame of the running gear, fold-out to the outside (LC 10,000 daN) * 1 pair of lashing rings at the transition from the running gear to the loading platform (LC 10,600 daN) * On the gooseneck: 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * 3.5-inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * 1 INOX tool box with 1 lid, mounted on the gooseneck to the right in the direction of travel by the aluminum side wall, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low bed with externally mounted beams, designed as a telescoping low-height loading platform with a front extension including a fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt and clevis coupling from low bed to running gear for swapping the loading platform or installing extension beams * Locking position approximately every 500 mm on the extension * 4 pairs of flush-mounted lashing rings set into the loading platform, distributed along the external frame (LC 10,000 daN) * 1 lashing ring each left and right on the rear cross member (LC 10,000 daN) * Fold-out extensions, approx. 230 mm per side (WITHOUT wooden planks) * Loose extension planks, steel-framed * Prepared for installation of bolt-on container locks for 1x 20' or 1x 40' container on the side beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the upper flange on the side beams for mounting M24 lashing eyes (LC 8,000 daN) * 2 pairs of M24 lashing eyes (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate covering, and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear * Pendulum axles, all axles hydro-mechanically force-steered * Hose rupture valve on the axle equalizing cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insert for securing in raised position * Axles finish-painted with 2 layers of 2K paint, plain in DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable remote control, with axle alignment control, no installation in the tractor

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Fodsikyh Hjpfx Am Sopg Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical System: Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 51 600 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Ložná plocha: - Labutí krk, délka cca 4 100 mm se středovým nosníkem - Ložná plocha ve výsuvném provedení, délka cca 9 500 mm se zkosením na zádi cca 350 mm x 10° a integrovanou závěsnou lištou pro nasazení volných ALU nájezdových ramp - Pneumatické zamykání s kuželovými uzamykacími čepy a zesílenými zajišťovacími pozicemi - Napájecí vedení je uloženo chráněně ve výsuvných nosnících a automaticky se přizpůsobuje aktuální délce ložné plochy Nápravy, odpružení a pneumatiky: - BPW nápravy a zavěšení, všechny nápravy hydromechanicky nuceně řízené - Montováno na otočné točně - Technické zatížení nápravy: 12 000 kg - Vzduchové odpružení se zdvihovým a spouštěcím ventilem - Pneumatiky 235/75 R17.5, dvoumontáž Lakování: - 6-ti komponentní povrchová úprava - Kompletní ocelová konstrukce po svařování otryskána - Jedna vrstva základního nátěru na bázi zinku, jedna vrstva adhezního primeru - Vrchní lakování dvěma vrstvami 2K akrylového laku v barvě MB 7350 Novagrau, poté utěsnění dutin speciálním voskem Ocelová konstrukce: - Ocelová konstrukce z vysoce pevných jemnozrnných ocelí - Kvalita oceli: - S355J2+N/S355MC (mez kluzu 355 MPa) Fjdeiuy Nljpfx Am Sspg - S690QL/S700MC (mez kluzu 690 MPa) - Svařeči certifikovaní dle DIN-EN 287-1 - Svařování metodou MAG dle EN ISO 4063, ochranný plyn M21 dle EN ISO 14175 Příslušenství: - Čelo z oceli, cca 1 600 mm vysoké - Kulatá NATO zásuvka na přední přípojnici - 3 kW elektrohydraulická jednotka pro ovládání hydraulických funkcí - 4 páry zapuštěných kotevních ok v vnějším rámu labutího krku - 4 páry kapes na sloupky v rámu labutího krku, pro sloupky cca 100x50 mm - 1 příčná lišta na kapsy na sloupky v ložné podlaze labutího krku, pro sloupky cca 100x50 mm (1x vzadu na labutím krku) - 2“ královský čep - Mechanické podpěry se dvourychlostní převodovkou a kličkou - JOST Modul B – statická zkušební zatížitelnost = 50 000 kg - Na labutím krku a ložné ploše cca 32 mm dřevěná podlaha, zapuštěná v ALU Omega profilech - Na výsuvu zajišťovací pozice cca každých 500 mm - 10 párů zapuštěných kotevních ok ležících ve vnějším rámu ložné plochy, vyklápěcí směrem ven - 6 párů kapes na sloupky ve vnějším rámu ložné plochy, pro sloupky cca 100x50 mm - 2 příčné lišty na kapsy na sloupky v ložné podlaze - Nerezový nářadlový box cca 1 250 x 500 x 550 mm - Zkosení na zadním příčníku vozidla cca 350 mm 10° - Integrovaná závěsná lišta pro volné alu nájezdové rampy na zadním příčníku - 1 pár opěrných trubek u zadního příčníku - Blatníky na všech nápravách - Centrální mazací zařízení s 1 čerpadlem - Dálkové řízení přední a zadní nápravy prostřednictvím kabelového dálkového ovladače pomocí tlačítka, s kontrolou sbíhavosti - Pod labutím krkem i vzadu na zadním příčníku vlevo a vpravo vždy jedna 7-pólová zásuvka na výstražné tabule - Jedna 7-pólová zásuvka na zadním příčníku - Příprava na přepravu kontejnerů „TWIST-LOCKS“ v ložné ploše pro přepravu 2x 20ft a 1x 40ft kontejnerů - Dálkové ovládání řízení navíc ke kabelovému dálkovému ovladači, se 2 kontrolkami na přijímači jako kontrola sbíhavosti - 2 manometry nápravové zátěže + diagram zátěže nápravy - 4 výstražné tabule cca 423 x 423 mm výsuvné o cca 400 mm - Standardní HRM metalizace (High Resistance Metallisation) vnějšího rámu - Kompletní ocelová konstrukce otryskána, poté definované viditelné plochy metalizovány žárově ZINACOR 850 (Zn 85% - Al 15%)

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel Fedpfx Amsi Dwlwo Sepg - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Fsdpfsya E A Nex Am Sepg Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Fsdeiu Etropfx Am Sjpg Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer Fedpfx Aouqlmnem Sjpg - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon Fodpfot Ag Uwox Am Sspg - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable Fodpfx Aounrapsm Sepg - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) Fpedpfx Aergzv Nom Seg * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: použitý, maximálna hmotnosť nákladu: 36 650 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2021, ďalšia kontrola (TÜV): 11/2025, Výbava: ABS, Excerpt of Equipment Load Area: Load area in extendable version with pneumatically operated locking mechanism. 2 pairs of recessed lashing rings (LC 5,000 daN). 1 pair of lashing rings in the gooseneck (LC 10,000 daN). 6 pairs of outward folding lashing rings (LC 5,000 daN). 3 pairs of outward folding lashing rings (LC 10,000 daN). Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Landing Gear: JOST mechanical landing gear with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load). Tyres: 245/70 R 17.5 tyres – brand at our discretion. Load index (146/146F) Axles: BPW axles, hydro-mechanically forced-steered. Air suspension with lift and lower valve. Axle tools. Brake System: Brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit. Steel Structure: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Premium and durable corrosion protection of the standard shot-blasted welding frame is guaranteed by a two-component (2K) zinc dust primer. High-quality two-component (2K) top coat, single-coloured in RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White). Rims silver. Metallic paint not available. Electrical System: Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Warning Signs: At the gooseneck and rear section, left and right, each with a mounting bracket for warning signs including socket. Includes the following optional equipment: - Remote steering from front and rear via cable remote control with push button operation; single-track axle alignment (installation in tractor unit not required) - Electro-hydraulic power unit (± 45kg) - 4 wheel chocks with holders on the front wall (± 5kg) - 2" king pin - One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35kg) - Yellow-red air couplings on the galvanized front connection rail - Yellow reflective tape as per EU regulations on the sides, extension, and rear of the trailer - European reflective plates (red-yellow) at the rear of the trailer - One mudflap at the rear of the trailer - Manual and documentation on USB stick - One bracket for a rotating beacon at the rear of the trailer - Load area with heavy-duty hardwood floor - 9 pairs of stake pockets for drop-in stakes approx. 100 x 50 mm in the outer frame of the load area (± 27kg) - Galvanized extendable widenings, extendable by approx. 230 mm per side (± 230kg) - Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with plug connection (NATO-NATO) - Galvanized supports under the inclined section of the loading area - On the central beam, a painted sand coating for anti-slip protection - 6 pairs of WADER container locks in the loading area for 1x20' container, 2x20' containers or 1x40' container; in the extension an additional locking point for a 45' container is provided (± 90kg) - 4 pairs of crosswise mounted stake pocket rails in the loading area for plug-in stakes approx. 100 x 50 mm (± 145kg) Fjdpfx Aex Epznjm Sopg

Stav: nový, maximálna hmotnosť nákladu: 25 300 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Fodpfjv Sw E Aox Am Sepg Selection of equipment. Full equipment details available upon request. Gooseneck * Gooseneck in SNT design to optimize loading platform length * Length approx. 3,750 mm, hydraulically liftable/lowerable and detachable gooseneck * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Beam Deck * Lowbed designed as an extendable vessel bridge in SUPER LOW design * Length approx. 6,850 mm * With mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length Rear Chassis * Short version with closed outer frame and checker plate covering * Chassis includes an excavator trough, which is closed at the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tyres. Load index 143/141J (146/146F) Braking System * Brand: WABCO, EBS-E according to EU regulations, WITHOUT connecting cable to the tractor unit Paintwork * 6-stage final treatment * Complete steel structure shot-blasted after welding * 1 coat of zinc primer * 1 coat of adhesion primer. Final paint with 2 coats of 2-pack (acrylic) paint in a single color, followed by cavity sealing with special wax Trailer Color * RAL 3002 Carmine red * Rim color: Silver grey * Side wall color: Natural aluminum Included Accessories * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit to control hydraulic operations, except for hydraulic winches. Without installation of supply connections on the tractor * Mounting adapter for 1 spare wheel in front of the gooseneck's front wall * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing profiles and locking bolts to bridge the lowbed's hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading platform, preparation for removable floor panels * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the outer beams of the loading platform (LC 10,000 daN) * Cut-outs on the top flange of the outer beams above the lashing rings * Mechanical pin-tab coupling from lowbed to chassis for exchangeable loading platform or installation of extension beams. Includes electro-pneumatic-hydraulic couplings * Outer beams of the lowbed coated with non-slip sand layer * 2nd driving height for upper drive position, max. ±50 mm from normal driving position, without controls installed on the tractor * 1 pair of lashing rings with retaining spring at the transition from the lowbed to the excavator trough (LC 10,000 daN) * Bevel front and rear a

Stav: nový, maximálna hmotnosť nákladu: 50 400 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete stock of vehicles, including those available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment. Full equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection strip with sockets * 3 kW electro-hydraulic power pack for hydraulic functions, except for hydraulic winches * 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * One plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approximately 40 mm thick hardwood floor covering over gooseneck, checker plate covering over king pin * 2-inch king pin * Rear part of gooseneck with mount for aluminum loading ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° * Recess in the platform and into the chamfer for receiving excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, first axle with forced steering, all other axles with hydro-mechanical forced steering * First axle with electromagnetically activated reverse lock, activated via reverse gear and manual control * Technical axle load: 12,000 kg each, air suspension with lift/lower valve * Twin tires 235/75 R 17.5 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood floor covering approx. 50 mm thick on loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions approx. 230 mm per side (without wooden planks) Fedotx Nwnopfx Am Sjpg * Wheel recesses with square climbing strips, approx. 15 x 15 mm in front of axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * Extendible U-profiles for inserting the aluminum covers: – on the fixed part behind the gooseneck – at the intermediate table – on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * 1 pair of mechanical rear supports * Remote steering from the front and rear via cable remote control, with single-track monitoring of axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-piece steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long and approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber flooring approx. 25 mm and steel flooring approx. 5 mm as additional

Stav: nový, maximálna hmotnosť nákladu: 91 640 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 850 mm, Výbava: ABS, Celý náš vozový park s okamžitě a krátkodobě dostupnými vozidly najdete na našich webových stránkách. Výběr z výbavy. Kompletní výbava na vyžádání. Labutí krk * Hydraulicky zvedatelný/snižovatelný a snímatelný labutí krk. Délka cca 3 650 mm. Pro tahače: 6 x 4 nebo 8 x 4 3-nápravový kompaktní přední podvozek * Uložení háku vpředu a vzadu, délka cca 3 560 mm * Šířka podvozku: cca 2 850 mm Rypadlový most * Teleskopický rypadlový most BB-A s přejezdovými háky vpředu a s čepovým okem vzadu * Základní šířka: cca 2 850 mm, délka: cca 7 150 mm, výška nosníku: cca 430 mm, šířka nosníku: cca 1 350 mm * Ložná výška cca 580 mm při světlé výšce cca 150 mm 5-nápravový zadní podvozek * Mechanická čepová spojka pro připojení hlubokoložného návěsu vpředu, zadní závěs vzadu * Šířka podvozku: cca 2 850 mm * Délka podvozku: cca 6 840 mm * Kyvná náprava 3-nápravová Přední podvozek * Kyvná náprava (Pendel-Achse), všechny nápravy hydro-mechanicky nuceně řízené Fpedpfx Asuvbdtsm Seg * Ventil proti zlomení hadice na vyrovnávacím válci nápravy s automatickou funkcí RESET * Hydraulický válec s uzavíracími kohouty a předinstalačním kolíkem pro zabezpečení ve zvednuté poloze * Konečná povrchová úprava náprav dvěma vrstvami dvousložkového laku v odstínu MB7350 Novagrau * Technická nosnost nápravy: vždy 14 640 kg (62 km/h) * Hydraulické vyrovnávání náprav * Pneumatiky předního podvozku: 12x dle výběru výrobce (M+S) 285/70 R19.5, nosnostní index 150/148J kyvná náprava 5-nápravový zadní podvozek * Kyvná náprava (Pendel-Achse), všechny nápravy hydro-mechanicky nuceně řízené * Ventil proti zlomení hadice na vyrovnávacím válci nápravy s automatickou funkcí RESET * Hydraulický válec s uzavíracími kohouty a předinstalačním kolíkem pro zabezpečení ve zvednuté poloze * Konečná povrchová úprava náprav dvěma vrstvami dvousložkového laku v odstínu MB7350 Novagrau * Technická nosnost nápravy: vždy 14 640 kg (62 km/h) * Hydraulické vyrovnávání náprav * Pneumatiky zadního podvozku: 20x dle výběru výrobce (M+S) 285/70 R19.5, nosnostní index 150/148J Lakování * HRM metalizace celého podvozku vozidla ZINACOR 850 (85 % zinek / 15 % hliník) pro zajištění nejlepší antikorozní ochrany * Závěrečný nátěr dvěma vrstvami dvousložkového laku, jednobarevně v RAL 3002 karmínově červené, dle systému RAL 841GL. Ráfky v odstínu stříbrná šedá Včetně příslušenství * Ocelová čelní stěna, výška cca 400 mm * Nasazovací ALU bočnice a zadní stěna na labutím krku, cca 400 mm vysoké, eloxované provedení * 3,5'' královský čep * BEKA-MAX centrální mazání pro labutí krk * Multispojovací hydraulické přípojky na labutím krku * BEKA-MAX centrální mazání pro 3-nápravový podvozek * Sedmipólová zásuvka vlevo a vpravo vzadu na předním podvozku pro výstražné tabule * Možnost zašroubování (ø cca 40 mm) každých cca 500 mm na horním pásu vnější trubky rypadlového mostu pro šroubovací oka (LC 16 000 daN) * Sklopná rozšíření s ocelovými deskami, nastavitelná na šířku cca 2 850 mm až cca 3 250 mm * Ocelové desky lze vkládat do dvou pozic pro vytvoření snížené ložné plochy. Nosnosti podle šířky viz zatěžovací diagram * Ocelové desky s gumovou povrchovou úpravou ± 12 mm * Sedmipólová zásuvka vlevo a vpravo, vpředu a vzadu na zadním podvozku pro výstražné tabule * BEKA-MAX centrální mazání pro 5-nápravový podvozek * Na zadním podvozku zásuvka pro kabelové dálkové ovládání natáčení náprav * Zadní podvozek s vanou * Dva nerezové nářaďové boxy, cca 855 x 340 x 390 mm, na labutím krku vlevo a vpravo * 1-válcový...

Stav: použitý, maximálna hmotnosť nákladu: 51 870 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2025, ďalšia kontrola (TÜV): 03/2026, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire range of vehicles, including models available immediately or on short notice, on our website. Excerpt from the equipment. Complete specification available on request. GOOSENECK • Gooseneck in SNT design for optimized load deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 • Plug-in steel front wall, approx. 400 mm high • Yellow-red air couplings on the front connector rail • ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets • 3 kW electro-hydraulic unit for controlling the hydraulic functions • External beams of gooseneck with mounting holes for bolted lashing rings • One mounting hole at the upper rear section of the gooseneck’s external beams for a bolted lashing ring • 1 pair of screw-in lashing rings included (LC 10,000 daN) • 1 pair of plug-in aluminium side walls, approx. 400 mm high, anodized, on the gooseneck • 1 plug-in aluminium rear wall, approx. 400 mm high, anodized, on the gooseneck • Approx. 40 mm hardwood decking on the gooseneck • 2-inch king pin • Gooseneck guide plate for the fifth wheel, approx. 500 mm wide • Mount at the rear section of the gooseneck for aluminium loading ramps • Round NATO socket at the front connector rail (Maeler & Kaege VG 96 917) LOADING DECK • Extendable loading deck, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° • Recess in the loading deck as well as in the chamfered area for accommodating an excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) • TPMS tyre pressure monitoring system according to ECE R 141 • BPW axles and suspension • 1st and 2nd axle rigid, 3rd and 4th axle self-steering Fedpfx Amoxtc Uhs Sopg • 3rd and 4th axle with electromagnetic reversing lock, can be activated via reverse gear and manually • Technical axle load rating: 12,000 kg each • Air suspension with lifting and lowering valve • 235/75 R 17.5 twin tyres, 3PMSF • Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg • Continuous hardwood decking (approx. 50 mm) on the loading deck and interrupted between axles (increases coefficient of friction) • Loading deck locked with tapered welded locking profiles every approx. 250 mm • Long holes for attachable and repositionable bridging elements at the front of the loading deck • Intermediate platform with stepped loading deck, approx. 300 mm wide, for extraction tube with large cross-section, with steel covering – front and rear with long holes for attachable and repositionable bridging elements – removable cover flush with the loading deck • 1 pair of lashing rings on the front crossmember (LC 10,000 daN) • 6 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward (LC 10,000 daN) • Additionally, 1 pair of lashing rings externally on the front crossmember of the loading deck, approx. 90° rotated inward towards the loading deck (LC 10,000 daN) • Extendable bolted steel extensions (galvanized), approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm (W x D), in the loading deck ahead of the 1st axle; wheel recesses with steel covering and square climbing bars approx. 15 x 15 mm, every approx. 200 mm • Between 2nd and 3rd axles in the loading deck, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split longitudinally, with wooden top, outer with plug-in locking...

Stav: nový, maximálna hmotnosť nákladu: 52 810 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú aktuálnu skladovú ponuku vozidiel, ktoré sú okamžite alebo v krátkom čase k dispozícii, nájdete na našej webovej stránke. Výpis zo základnej výbavy. Kompletný zoznam výbavy na požiadanie. Nakladacia plocha: * Nakladacia plocha s cca 30 mm hrubou podlahou z tvrdého dreva * 10 párov vyklápateľných kotviacich ok (LC 10 000 daN) Sedadlové podpery: * Hydraulické sedlové podpery TPMS: * Systém monitorovania tlaku v pneumatikách (TPMS) podľa ECE R 141. Prenos údajov do ťažného vozidla prebieha cez štandardizované EBS rozhranie podľa ISO 11992. Pre správne zobrazenie musí byť ťažné vozidlo schopné tieto údaje prenášať a zobrazovať. Nápravy a pruženie: * BPW nápravy, technická nosnosť na nápravu 12 000 kg, prvá náprava pevná, ostatné nápravy hydro-mechanicky nútene riadené, namontované na otočnom čape * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom * Sada náradia na nápravy Obutie: * Pneumatiky 445/65 R 22.5 169 K Fodpfx Amjxttc As Sopg Elektrická inštalácia: * Elektrická inštalácia v súlade s predpismi EÚ, osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX na pripojovacej lište vpredu so zásuvkami 24N, 24S a 15-pin * Zapojenie podľa ISO noriem: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brzdový systém: * Brzdový systém Wabco podľa predpisov EÚ s EBS-E (4S3M), bez prepojovacích liniek na ťažné vozidlo Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevných jemnozrnných ocelí * Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lakovanie: * Celá oceľová konštrukcia automaticky otryskaná v turbínovom zariadení po zváraní * Druhé tryskanie korundom pre optimálnu priľnavosť náterového systému * Finálne lakovanie 2 vrstvami dvojzložkového vrchného laku, jednoliato v RAL 1007 narcísovo žltá podľa RAL systému 841GL * Zadná časť metalizovaná a nalakovaná v RAL 9010 (čisto biela) * Disky kolies striebornošedé * Systém vrstiev testovaný v koróznom (soľná hmla) teste podľa ISO 9227-NSS * Dutiny uzavreté špeciálnym voskom Vrátane príslušenstva: * Nakladacia plocha s cca 30 mm hrubou podlahou z tvrdého dreva * 2-palcový kráľovský čap * Pozinkovaná oceľová predná stena (EN12642-XL), výška cca 1 200 mm * Na pozinkovanej prednej prípojkovej lište žlto-červené vzduchové spojky * Na husím krku a zadnej časti vľavo aj vpravo vždy držiak na výstražné tabule vrátane zásuvky * Nútené riadenie náprav spredu aj zozadu cez káblové diaľkové ovládanie s ovládacími tlačidlami, s kontrolou súosovosti náprav (bez inštalácie na ťažnom vozidle) * Elektro-hydraulická jednotka * 12 párov vreciek na stĺpiky (steckrungen) cca 100 x 50 mm vo vonkajšom ráme nakladacej plochy * Tlakomer náprav na určovanie zaťaženia náprav vrátane diagramu zaťaženia * Zdvihateľná predná náprava s ovládaním cez TEBS E * 5 párov priečnych líšt na stĺpiky cca 100 x 50 mm * 1 nerezová skrinka na náradie INOX 1 200 x 460 x 550 mm vpredu pod nákladnou plochou v smere jazdy vľavo * 1 manévrovacia spojka s vystužením priskrutkovaná na koncovej priečke * Centrálne mazacie zariadenie BEKAMAX (Pico) s bežným mazivom NLGI-2 a odnímateľným krytom čerpadla * 2 LED cúvacie svetlá namontované na zadnom plechu * HRM-metalizácia celého podvozku vozidla pomocou ZINACOR 850 (85 % zinok, 15 % hliník)

Stav: nový, maximálna hmotnosť nákladu: 36 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our full range of vehicles, including those available for immediate or short-term delivery, on our website. Extract of equipment features. Full specification available on request. - Gooseneck, approx. 4,100 mm long, with central beam - Platform with double-extendable design, approx. 9,400 mm length - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Tyres: 235/75 R 17.5 3PMSF, twin tyres - WABCO brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic control operations; supply connections to tractor unit not included - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for insertable stanchions approx. 100 x 50 mm - 2-inch king pin Fedpewvzg Refx Am Sepg - 8 pairs of stake pockets integrated into the outer frame of the loading platform for insertable stanchions approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel - Remote steering from front and rear via cable remote control with pushbuttons, autotraction control for the axles, no installation in tractor unit - 2 axle load gauges mounted on the left side - Front wall made of steel, approx. 1,600 mm high - 3 cross-mounted stanchion pocket strips in the loading platform floor for insertable stanchions approx. 100 x 50 mm - 1 cross-mounted stanchion pocket strip in the floor of the gooseneck for insertable stanchions approx. 100 x 50 mm - 1 additional lockable INOX toolbox mounted under the platform - WADER container pockets in the platform for transport of: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metal coating (High Resistance Metallisation)

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2016, zavesenie: vzduch, Rok výroby: 2016, Výbava: zdvíhacie čelo, Odpruženie: vzduchové odpruženie Zadná náprava 1: riadená Fpodpfjvvwzrox Am Sog Zadná náprava 2: riadená Zadná náprava 3: riadená Celková hmotnosť: 48 000 kg Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Cena: na vyžiadanie Pre viac informácií kontaktujte Davida F. Middelmana.