Müller-Mitteltal 2-Achs Satteltieflader 8,1 To. Lg, Lenk- Achse kúpiť použité (54 713)

Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring actuators * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange towing eye: * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate ----Electrics / Lighting: * RDÜ tyre monitoring system * 15-pin electric connector * LED tail lights 12/24 Volt ----General attachments: * Jost landing gear at front * External folding support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm on right side * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation in front of bulkhead for retrofitting container locks * Bolt-on bulkhead made from flat sheet steel * Split steel sheet side walls, trapezoidal profile, foldable with mid-mounted drop-in stanchion * Steel rear wall, slide-in between the ramps; storage during non-use inside in front of bulkhead * Bolt-on rear stanchions ----Load securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t drop-in lashing rings every 600 mm * Lashing package: at front and rear corners each 1 x 10 t UVV lashing ring, at each side 2 x 8 t UVV retractable lashing rings in outer frame, various holes in bulkhead and rear crossmember for 1.2 t lashing points ----Ramps: Kedpfx Aqjmi Tcqevelt * One-piece slide-in ramps 12 t/pair, ramp size approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, support legs, and access ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and landing gear painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Stav: použitý, prvá registrácia: 07/2019, pohotovostná hmotnosť: 3 290 kg, maximálna hmotnosť nákladu: 8 610 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, ďalšia kontrola (TÜV): 05/2027, farba: strieborný, typ prevodu: mechanický, zavesenie: oceľ, celková dĺžka: 9 163 mm, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 450 mm, Výbava: ABS, Mechanické rampy. Nakladacia plocha má dĺžku 7,00 m. Príves je znížený na 10 000 kg. Kedpsy Ta Ubsfx Aqvolt

Stav: použitý, najazdené kilometre: 491 890 km, výkon: 315 kW (428,28 k), prvá registrácia: 03/2018, typ paliva: nafta, celková hmotnosť: 26 000 kg, konfigurácia náprav: 3 nápravy, brzdy: retardér, farba: oranžová, typ prevodu: automatický, emisná trieda: Euro 6, Výbava: klimatizácia, nezávislé kúrenie, Navštívte našu webovú stránku, kde nájdete kompletnú ponuku našich vozidiel vrátane množstva ďalších fotografií a informácií vo viacerých jazykoch. SEL 8443 Mercedes-Benz Actros 2543 Stavebný materiál / Retarder / HMF 2110 L2 / Riadená náprava / Zdvíhacia náprava nemecká registrácia 1. registrácia: 02.03.2018 491 890 km Motohodiny: 16 567 Euro 6C Technická celková hmotnosť (kg): 26 000 Povolená celková hmotnosť (kg): 26 000 Pohotovostná hmotnosť (kg): 14 300 VIN: WDB96302010219182 STK: 04.2026 / Kontrola tachografu: 10.2026 MOTOR A PREVODOVKA: 10 cc Klodjynw N Ropfx Aqvot Počet valcov: 6 radový Výkon: 315kW / 428PS (430PS) Prevodovka: automatická Retarder PNEUMATIKY A NÁPRAVY: Pneumatiky: 315/80 R 22,5 Konfigurácia náprav: 6x2 3. náprava: riadená 3. náprava: zdvíhacia Vzduchové odpruženie Kotúčové brzdy Rázvor (mm): cca 4 900 Predná náprava (kg): 7 500 NÁDRŽE: 1 nádrž: 430 l KABÍNA: 1 odpružené sedadlo Multifunkčný volant 1 lôžko Nezávislé kúrenie Automatická klimatizácia Rádio s navigáciou CB rádiostanica NADSTAVBA: Kempf typ: PAB 24 ĎALŠIE ŠPECIFIKÁCIE: Vonkajšia slnečná clona Ťažné zariadenie Stavebný materiál POŠKODENÉ ČELNÉ SKLO ŽERIAV: HMF typ: 2110 L2 Pozrite údaje o nosnosti nakladacieho žeriava na fotografii. Bez diaľkového ovládania DOKUMENTÁCIA VOZIDLA: Osvedčenie o evidencii Technický preukaz Dodatočné dokumenty na požiadanie za príplatok. M. BUFANO m. (italiano, english, deutsch) J. CORDEIRO j. (português, español, italiano, english) J. MARJANOVIC j. (deutsch, bosanski) L. OBODYNSKA ukrajinsky/українська, rusky/русский Hovoríme: NEMECKY, ANGLICKY, TALIANSKY, ŠPANIELSKY, PORTUGALSKY, UKRAJINSKY, RUSKY, POĽSKY, BOSNIANSKY Napriek maximálnej snahe o presnosť údajov nemôžeme prebrať záruku za chyby alebo vynechania. Prosíme našich zákazníkov, aby si overili fotografie. Uvedené rozmery sú približné hodnoty. Naše vozidlá sa predávajú v aktuálnom stave. Pozývame zákazníkov na osobnú obhliadku stavu vozidla. Ponúkame možnosť skúšobnej jazdy. Dôležité upozornenie: vozidlo sa dodáva s aktuálne namontovanými batériami. V prípade záujmu o nové batérie nás prosím kontaktujte pre cenovú ponuku.

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm Ksderwc R Rspfx Aqvjlt ----Electrics / Lighting: * Tyre pressure monitoring system with indication in the truck via EBS signal (no installation required on truck side) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent mounting of container locks * Bolted 400 mm bulkhead made of smooth sheet * Bolted rear stakes * Drop sides with spring lifting assist ----Load securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 6.3 t lashing ring * Various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail in the longitudinal axis, center-mounted, for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating access ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l/min, up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black * Drop sides painted in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery time: * Immediately available ex works Egtsdorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: Kledpsrwc R Aefx Aqvet * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners Kljdpfjwh Hdxox Aqvst * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 14.4 ----Brakes: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange towing eye: Approx. 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical hot-dip galvanized folding supports at rear * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, fitted on the right-hand side * Plastic quarter mudguards * Two-step access on the left-hand side as climbing aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights ----Tipper body: * Steel pallet - 3-way tipper construction * Continuous side walls at the top with internal pipe reinforcement – without central stanchions – foldable with drop side spring assist * Tailgate foldable and swinging with manual central locking * Rear bulkhead bolted and hot-dip galvanized * 4 mm fine-grain steel floor plate * Net hooks, mounting rail at rear for loading ramps * Preparation for retrofitting side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: * Each corner with 1 x 5 t lashing point, each side with 4 x 3 t lashing rings recessed in outer frame ----ALU loading ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable compartment at the rear underneath the loading platform, integrated in the chassis ----Tires: * Tyres 385/55 R 22.5 ----Painting: * Axles, springs, air tanks, and landing gear painted in black shade * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * Side panels painted in RAL 9010 pure white * Painting of side walls in other RAL colors available at additional cost ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration and manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: Klodpel Th A Ejfx Aqvet * Available from approx. week 29/2026

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 14.4 ----Brzda: * Wabco EBS * Núdzové odblokovanie pre pružinové brzdové valce * Bubnové brzdy ----Nápravy: * 2 x 7 t Gigant nápravy ----Pruženie: * Parabolické listové pružiny s tandemovou vyrovnávacou jednotkou ----Ťažné zariadenie / Ťažné oko: * Výškovo nastaviteľné, žiarovo zinkované ťažné zariadenie (cca 300 mm) s 40 mm ťažným okom s prírubou ----Všeobecné príslušenstvo: * Jost mechanický podperný zdvihák vpredu * Dva mechanické, žiarovo zinkované sklopné podpery vzadu * Žiarovo zinkovaný skrutkovaný podbehový ochranný rám * Skriňa na náradie z pozinkovaného oceľového plechu, vpravo na boku * Plasťové štvrtinové blatníky * Dvojstupňový nášľap na ľavej strane na uľahčenie nástupu ----Elektrická výbava / Osvetlenie: * RDÜ systém monitorovania tlaku v pneumatikách * 15-pólová elektrická zásuvka * LED koncové svetlá ----Sklápacia korba: * Oceľová paletová trojstranná sklápačná nadstavba * Súvislé bočné steny hore so zosilnením z vnútornej trubky – bez stredových stĺpikov – sklopné s plynovými vzperami * Zadné dvere sklopné, ako aj výkyvné cez manuálne centrálny zámok * Skrutkované, žiarovo zinkované zadné rámy * 4 mm podlaha z jemnozrnnej ocele * Hakýky na sieť, prijímacia lišta vzadu na nájazdové rampy * Príprava na dodatočnú montáž nadstavieb bočníc ----Podvozok: * Žiarovo zinkovaný podvozok Klodpfxjv Dz N Ne Aqvst ----Zabezpečenie nákladu: * V každom rohu 1 x 5 t upevňovacie oko a po stranách 4 x 3 t upevňovacích ôk zapustených do vonkajšieho rámu ----ALU nájazdové rampy: * 1 pár hliníkových nájazdových rámp, cca 3.570 x 400 mm (nosnosť 8 t/pár), vhodné pre vozidlá s gumenými pneumatikami a pásové vozidlá * Uzamykateľný úložný priestor pod ložnou plochou, zabudovaný do podvozku ----Pneumatiky: * Pneumatiky 385/55 R 22.5 ----Lakovanie: * Nápravy, pružiny, vzduchové nádrže a podperný zdvihák nalakované čiernou farbou * Podvozok, ťažné zariadenie, podlaha, čelná stena, sklopné podpery žiarovo zinkované * Bočné steny lakované v ľubovoľnom odtieni podľa RAL (žiadne špeciálne ani metalické laky), zmena možná do cca 6 týždňov pred dokončením ----Ďalšie informácie: * Nadstavba zosilnená s certifikátom o zabezpečení nákladu podľa EN 12642 XL * Nové vozidlo bez prvej registrácie s továrenskou zárukou * Zmeny a predaj vyhradené ----Dodacia lehota: * Dostupné približne od 29. týždňa / 2026

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: Kodpfxex Nli Ns Aqvelt * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck dashboard via EBS signal - no truck-side installation required - * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing brackets possible at approx. 600 mm intervals - delivery includes 12 units of 3,000 kg side lashing brackets per side * 5 pockets per side for pipe stanchions 100 x 50 mm in the outer frame - stanchions not included in delivery * 30 mm phenolic plywood floor ----Drum Mounts: * 3 galvanized drum mounts secured with container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * 6,000 kg maximum drum weight per cable drum support * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reverse lights (activated via reverse gear) * LED lighting ----General Equipment: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix exterior frame, bent at 45°, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lateral lashing rings per side * 5 pockets per side for tube stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum Mounts: * 3 galvanised drum supports, secured via container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross-connection * Max. drum weight per cable drum support: 6,000 kg * Without drive and drum brake Klodpsx Nlkgofx Aqvst * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms to secure the drum on the customer side against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrading to 30 t gross weight technically possible * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available as of approx. week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 750 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brzda: * Brzdový systém EBS * Nouzové odjištění pružinových válců * Bubnové brzdy ----Náprava: * 2 x 7 t gigatické nápravy Kodpjv Eq Evofx Aqvelt ----Odpružení: * Parabolické pružiny s vyrovnávacím agregátem ----Tažná oj / tažné oko: * Tažná oj s výškovým nastavením do 300 mm * Prodlužovací tažná oj o 250 mm na 2 250 mm * 40mm přírubové tažné oko ----Elektrika / osvětlení: * Monitorování tlaku v pneumatikách (RDÜ) * 15pinová elektrozásuvka * LED osvětlení ----Obecné příslušenství: * Podpěrná klika vpředu * Vnější sklopné podpěry vzadu * Plastový kufr na nářadí cca 858 x 500 x 500 mm vpravo vpředu na čele * Boční ochrana proti nárazu * Plastové čtvrtinové blatníky ----Nákladová plocha nízkoložného přívěsu: * 50 mm podlaha z jehličnatého dřeva * Před čelem a zadní šikminou příprava pro dodatečnou montáž kontejnerových zámků pro přepravu 20" kontejnerů * Přišroubovaná čelní stěna z hladkého plechu * Boční stěny z ocelového plechu - trapezový profil - sklopné a dělené uprostřed (1x dělené) * Ocelová zadní stěna zasunutelná mezi držáky rampy, při nepoužívání uložená uvnitř před čelní stěnou * Zadní sloupky přišroubované ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45° se zajišťovací silou 2 t každých 480 mm * Možnost instalace sklopných zajišťovacích ok s nosností 3 t každých 600 mm * V každém rohu vpředu a vzadu vždy 1 x 6,3 t upínací oka * V čele a koncovém nosníku různá upínací místa pro 1,2 t * Profifix upínací lišta uprostřed po délce s možností upnutí do LC 3000 daN ----Rampy: * Jednodílné mechanické rampy z mřížového roštu s pružinou pro jednoruční obsluhu cca 2750 x 600 mm (skladatelné až na 20 mm) * Náběhová šikmina vzadu cca 860 mm podvozek ----Rozvor: * Rozvor 1 140 mm ----Lakování: * Tažná oj, čelní stěna, zadní čelo, sklápěcí podpěry a nájezdové rampy žárově zinkovány * Nápravy, pružiny, vzduchové zásobníky, přírubové tažné oko a podpěrná klika lakovány v černém odstínu * Lakování bočnic v libovolné barvě RAL (kromě speciálních nebo metalických laků), barvu lze změnit až cca 6 týdnů před dokončením ----Informace: * Zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu * Nové vozidlo s tovární zárukou * Změny, chyby a mezitímní prodej vyhrazeny ----Dodací lhůta: * dostupné cca od 30. týdne / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Kljdpoylfvmofx Aqvot Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: Kljdsylfvgjpfx Aqvjt * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 10 750 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14,4: ----Brzda: * Brzdový systém EBS * Nouzové uvolnění pružinových válců * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy Kedpjv D Tcbsfx Aqvolt ----Odpružení: * Parabolické pružiny s vyrovnávacím agregátem ----Tažná oj / Flanšová tažná oka: * výškově nastavitelná tažná oj v rozsahu 300 mm * prodloužení tažné oj o 250 mm na 2 250 mm * 40mm flanšová tažná oka ----Elektrika / Osvětlení: * RDÜ systém monitorování tlaku v pneumatikách * 15pólová elektrická zásuvka * LED osvětlení ----Obecné přídavné prvky: * přední podpěrný nástavec * zadní sklopné podpěry vně * plastová schránka na nářadí cca 858 x 500 x 500 mm vpředu vpravo zvenčí na čelní stěně * boční ochrana proti vniknutí vozidel * plastové čtvrt-blatníky ----Ložná plocha: * 50mm jehličnatá podlaha * zařízení před čelní stěnou a zadním sklonem pro dodatečnou montáž kontejnerových zámků pro přepravu 20" kontejnerů * čelní stěna se šroubovaným hladkým plechem * bočnice ze ztrubkovaného ocelového plechu -v polovině dělené, výklopné * ocelová zadní stěna, zasouvatelná mezi držák ramp – při nepoužívání uchycena uvnitř před čelní stěnou * zadní sloupky našroubované ----Zajištění nákladu: * děrovaný vnější rám, ohnutý cca 45 stupňů, s upevňovací silou 2 t každých 480 mm * možnost instalace sklopných kotev s nosností 3 t každých 600 mm * v rozích vpředu a vzadu vždy jedna kotevní oka 6,3 t * různé otvory v čelním a závěrném nosníku pro vázání nákladu s nosností 1,2 t * Profifix kotvící lišta ve středové podélné ose pro zajištění nákladu až do LC 3000 daN ----Rampy: * jednodílné mechanické mřížové nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou, cca 2 750 x 600 mm (složitelná na 20 mm) * zadní nájezdový sklon cca 860 mm podvozek ----Rozvor: * rozvor 1 140 mm ----Lakování: * tažná oj, čelní stěna, zadní vrata, sklopné podpěry a nájezdové rampy žárově zinkovány * nápravy, pružiny, vzduchové zásobníky, flanšová tažná oka a podpěrná noha lakovány černou barvou * bočnice lakované v požadovaném odstínu RAL (bez speciálních a metalických laků), lze měnit do cca 6 týdnů před dokončením ----Informace: * zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu * nový vůz s tovární zárukou * změny a předchozí prodej vyhrazeny ----Dodací lhůta: * k dodání od cca týdne 30 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18,0: * 2-in-1: Suitable for roll-off containers and as a low loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm draw eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Folding A-sign at the rear ----Loading Platform: * Main frame with raised outer frame for guiding roll containers * Steel sheet floor with wheel recesses in the bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-point locking and mechanical plug-in stop angles at the front of the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the inclined ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front of the bulkhead support * 3 pairs of 10 t UVV lashing rings laterally in the outer frame Kedpfjl Tq Nmex Aqvolt * Each side: 4 x 2 t lashing eyes in cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Paintwork: * Chassis, bogie, locking parts and rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black tone ----Information: * New vehicle without initial registration, full manufacturer’s warranty * Subject to errors and prior sale * Example images ----Delivery Time: * Available from approx. calendar week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-bed trailer ----Braking System: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function, plus RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and adjustable height ----Electrics / Lighting: * Tire pressure monitoring with indicator in the truck via EBS signal (no truck-side installation required) * LED tail lights, 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear impact protection buffers * Rear foldable "A" sign ----Loading Area: * Main frame with raised outer rails for roll container guidance * Steel floor plate with roll grooves in bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point locking system plus mechanically insertable stop angles at the front track, load securing certificate to DIN 30722-1 * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10-ton UVV lashing rings at the front bulkhead carrier * 3 pairs of 10-ton UVV lashing rings on the side outer frames Kodjl Tpc Aopfx Aqvolt * 4 pairs of 2-ton cloverleaf lashing points per side * 4 x 8-ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable rear storage compartment) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in a shade of black ----Information: * New vehicle without prior registration, with full manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available approx. from week 43 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 830 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, Rok výroby: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping operations ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck display via EBS signal (without truck-side installation) * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar / Drawbar Eye: * Drawbar with 50 mm flanged drawbar eye (adjustable by +77 mm and -33 mm using offset plate) ----General Attachments: Klodpex Ipbyofx Aqvet * Landing gear at the front * Folding galvanized steel underrun protection for paver feeding * Enclosed individual plastic mudguards * Front wall platform made of grating with boarding step on the drawbar and hand grips on the front wall ----Chassis: * Chassis made of high-strength fine-grained steel ----Tipper Body: * Steel 3-way tipper body with asymmetrical continuous aluminum side walls (without central stanchion), pendulum-mounted with manual central locking, and side wall foldable on the left with drop side spring lifter * Rear wall – made of HBW 400 steel – pendulum-mounted by automatic 2-claw latch * 5 mm steel floor made of HBW 450 steel ----Load Securing: * Each side equipped with 4 x 3 t lashing rings – recessed and foldable – integrated into the steel floor ----Roll Cover: * Roll cover – agate grey similar to RAL 7038 * Cover tensioned using side tensioning ratchets and tensioning rubbers front and rear ----Paintwork: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air tanks, landing gear, flanged drawbar eye painted black * Sideboard paintwork in a desired RAL color shade (excluding special or metallic paints), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * New vehicle without first registration with manufacturer's warranty * Subject to errors and prior sale * Sample images (vehicle images may differ due to special equipment) ----Delivery Time: * Available from calendar week 42/2026

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Braking system: * Wabco EBS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange-type towing eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange-type towing eye ----Electrics / Lighting: * RDÜ tire monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cable for forestry and agricultural towing vehicles * LED rear lights ----General attachments: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access step, front left (in direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Net hooks on the sides and rear, at the central locking mounts, as well as 2 on the front wall * Steel pallet three-way tipper body (continuous side walls – no center posts – foldable with drop side spring assist; tailgate foldable and swinging, with manual central locking) * 4 mm steel floor * Rear mounting rail for loading ramps ----Load securing: * Lashing point, one per corner, 5 t each * Additionally, four 3 t lashing rings recessed in the side outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps at the rear, integrated under the loading platform in the chassis ----Tyres: Kljdpfxeq Euage Aqvot * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear posts hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted black * Side panels can be painted in a RAL color of your choice (no special or metallic paintwork), changeable up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Errors and prior sale excepted * Sample images ----Delivery time: * Available from approx. calendar week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring-loaded cylinders Kjdpfxsl Thw Io Aqvslt * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equaliser assembly ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flanged drawbar eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V, 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General Equipment: * Mechanical support winch at the front * Rear: 2 mechanical folding supports * Right-hand side plastic tool box * Two-step entrance front left (in direction of travel) * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the side and rear in the central locking mounts and 2 on the front wall * Steel 3-way tipper body (continuous side walls – without central posts – foldable with board wall spring assist, foldable and swinging rear flap with manual central locking) * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side, integrated into the external frame ----Ramps: * 1 pair aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment underneath the loading deck, integrated into the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, support legs, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, drawbar eye and support winch painted in black * Side wall paintwork in your chosen RAL colour (no special or metallic paints), changeable up to approx. 6 weeks before completion ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images ----Delivery Time: * Available from approx. week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14,4: Kledpfxox Hm Rcs Aqvet * Wabco EBS (elektronický brzdový systém) * Núdzové odblokovacie zariadenie pre pružinové brzdové valce * Sledovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle prostredníctvom EBS signálu – bez inštalácie na strane vozidla * Bubnové brzdy * 2 x 7 t Gigant nápravy * Parabolické pružiny s tandemovým vyrovnávacím agregátom * Približne 300 mm výškovo nastaviteľná ťažná tyč s 40 mm prírubovým okom * Jost mechanický oporný kľuk vpredu * 2 mechanické sklopné podpery vzadu * Plastová náradie s rozmermi cca 750 x 350 x 300 mm vpredu, vpravo po boku podvozku * 15-pólová elektrická zástrčka * LED koncové svetlá 12/24 V * Skrutkovaný ochranný rám proti podbehnutiu * Plastové štvrť-blatníky * Sieťové háky v miestach centrálneho zamykania a 2 kusy na čelnej stene * Podvozok z jemnozrnnej ocele * Oceľová paletová trojstranná sklápacia nadstavba so zosilnenými Strong bočnicami (súvislé bočné steny hore s vnútorným výstužným rúrkovaním, bez stredových stĺpikov, sklápateľné s pružinovým zdvíhacím mechanizmom) * Zadné stĺpiky skrutkované * Kombinovaná oceľová krídlová zadná stena, dvojkrídlová, asymetricky delená, otvárateľná a aretovateľná do 270°, nevyklápateľná, s prídavným kyvným rámom na automatické otváranie zadnej steny pri sklápacom procese, uzamknutie pomocou pozinkovaného otočného tyčového zámku vzadu a centrálneho zamykania; funkcia deaktivácie automatickej zadnej steny pri sklápani dozadu s otvorenou krídlovou bránou * V každom rohu 1 x 5 t úchyt na kotvenie, po stranách zapustené 4 x 3 t kotviace oká v vonkajšom ráme * 4 mm oceľová podlaha z jemnozrnnej ocele * Vzadu vodiaca lišta na nakladacie rampy * Zosilnená nadstavba s certifikátom zaistenia nákladu * 1 pár hliníkových nakladacích rámp cca 3 570 x 410 mm (nosnosť 10 t/pár), vhodné pre pneumatikové a pásové vozidlá * Uzamykateľný úložný priestor pod ložnou plochou, integrovaný v podvozku, pre rampy * Ťažná tyč, ochrana proti podbehnutiu, zadné stĺpiky, zadné sklopné podpery žiarovo pozinkované * Nápravy, pružiny, vzduchové nádoby, oporný kľuk lakované čiernym odtieňom * Pneumatiky 358/55 R 19,5 * Lakovanie bočníc v ľubovoľnom RAL odtieni (okrem špeciálnych a metalických farieb), možná zmena do cca 6 týždňov pred dokončením * Zmeny a predbežný predaj vyhradený * K dispozícii ihneď od 29. kalendárneho týždňa 2026 * Ilustračné fotografie

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable drawbar (approx. 300 mm), with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding support legs at the rear Kodpjx Hm Riofx Aqvelt * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * 15-pin electrical connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the storage positions for the central locking, plus two at the front wall * Chassis made from high-tensile fine-grain steel * Steel pallet – 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal tube reinforcement – without center stanchions – drop-down, with board wall spring lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split – can swing and be locked at 270°, not drop-down – including additional pendulum frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock at rear and central locking; deactivation function for automatic rear wall opening when tipping backwards with the wing door open * 1 x 5-ton lashing ring in each corner, plus four 3-ton lashing rings recessed in the external frame on each side * 4 mm floor plate made of fine-grain steel * Rear mounting rail for drive-on ramps * Reinforced superstructure with load securing certificate * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 tons per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment, accessible from the rear, integrated under the loading area within the chassis for ramps * Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted black * Tires 358/55 R 19.5 * Side walls painted in a RAL color of choice (excluding special or metallic paints), color can be changed up to approx. 6 weeks before completion * Subject to errors and prior sale * Available immediately from calendar week 29/2026 * Sample photos

Stav: použitý, najazdené kilometre: 228 000 km, výkon: 260 kW (353,50 k), prvá registrácia: 04/2018, typ paliva: nafta, celková hmotnosť: 26 000 kg, konfigurácia náprav: 3 nápravy, farba: biely, typ prevodu: automatický, emisná trieda: Euro 6, dĺžka ložného priestoru: 8 100 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 2 190 mm, Rok výroby: 2018, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, nezávislé kúrenie, zdvíhacie čelo, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good and reasonably priced vehicle with a fully documented service history from our company! Special Equipment: Front axle load 8.0 t, trailer socket 12V / 13-pin, audio system: CD radio (Bluetooth), battery 220 Ah, brake connection standard and DuoMatic, compressed air connection in driver’s cab, high compressed air unit, air horn, electrical pre-installation in driver’s cab 24V / 100 A, driver assistance system: brake assist (Active Brake Assist), driver’s cab: steel-sprung, comfort, alternator 150 A, transmission 12-speed – type: G 211-12, info display 12.7 cm with video function, 3-piece mudguards, fuel tank: 500 l aluminium, roof air deflector (lockable), reinforced engine brake, steered tag axle, acoustic reverse warning (external warning signal), tail lift switch, reinforced rear cross member, circuit breaker, driver’s seat in driver’s cab: comfort air suspension seat, driver’s seat with foldable backrest, exterior sun visor, side window sun blind, driver’s door, voltage converter 24V / 12V 10 A, 12V socket in passenger footwell, additional 24V socket in passenger footwell, CB radio preparation, reversing camera preparation, auxiliary heater (water). Further Equipment: Emission standard EURO 6, axle configuration: 6x2, trailer brake 2-line, connections left, trailer socket 24V / 15-pin, Antos, exterior mirrors electrically adjustable and heated, rear axle differential lock, steel air tank, driver assistance system: lane keeping assistant, driver’s cab: width 2.30 m, driver’s cab hydraulic tilt, driver’s cab M ClassicSpace, cab floor with 320 mm engine tunnel, suspension: air/air (full air), electric window lifters, tinted windscreen, urea tank (AdBlue): 60 l, manual roof hatch (steel), rear axle crown wheel 440, body/chassis: chassis frame, comfort central locking system, fuel tank: 290 l aluminium, non-regulated power steering pump, front air intake, 2-stage air compressor, engine 7.7 l – 260 kW R6 diesel (OM 936), engine compartment encapsulation, single tires on tag axle, wheelbase 4,900 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes on front and rear axles, seat covers/upholstery: fabric, passenger function seat in cab, front splash guard, front axle stabilizer, additional stabilizer, rear axle/tag axle, 24V socket in cab, tachograph/EC control device, aerodynamically shaped underbody panelling, front underride guard, toll system preparation, cranked front axle. Kodpfewwpqmox Aqvelt GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration, export papers / EUR 1, and manufacturer’s declaration for export. FINANCING On request, we are happy to provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE TÜV (roadworthiness) / UVV tail lift inspection / LGS test / tachograph inspection / installation of OBU device and servicing by our AUTHORISED SERVICE CENTRE on site TOLL / ROAD FEES Toll booking possible on-site. ARRIVAL / DISTANCES Wittlich railway station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale according to our General Terms and Conditions. The information on the internet is non-binding and for description purposes only. It does not represent guaranteed characteristics. The seller is not liable for typing or transmission errors. VEHICLE LOCATION: Dr. Oetker Str

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * RDÜ (Tyre Pressure Monitoring System) * LED lighting ----General Attachments: * Jost support winch at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth plate front wall * Side walls made of trapezoidal-profiled steel sheet, foldable, with drop side spring lifters * Rear wall made of steel, can be pushed in between the ramps (holder for storage inside on the front wall when not in use) * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t drop lashing shackles every 600 mm * In each corner, front and rear, 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm width) * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear panel * Drop side colour in RAL 9010 pure white * Painting of side walls in a RAL colour of your choice available at extra cost ----Info: * Reinforced and certified structure to EN 12642 XL, incl. load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale Klodpfoxglibex Aqvot ----Delivery Time: * Available from approx. calendar week 27/2026 (mid-2026)

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes Kodpjxglh Rjfx Aqvolt * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted smooth steel front wall * Trapezoidal steel side walls, drop-down with side wall spring lifts * Steel rear wall slidable between the ramps - holder for storage at the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for fitting 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh-run loading ramps with spring assist for single operator use, approx. 2,750 x 600 mm (can be telescoped to 20 mm clearance) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, loading ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge ----Info: * --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 27/2026

Stav: použitý, pohotovostná hmotnosť: 7 400 kg, maximálna hmotnosť nákladu: 27 400 kg, celková hmotnosť: 34 800 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1989, dĺžka ložného priestoru: 12 800 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 2 450 mm, objem nakladacieho priestoru: 77 m³, celková dĺžka: 2 500 mm, celková šírka: 3 750 mm, zavesenie: vzduch, veľkosť pneumatiky: 14/80R 20, farba: biely, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: Bovenden, 3-nápravový, vzduchové odpruženie, posledná náprava nútene riadená, ABS (antiblokovací systém), rolovacia brána, bočná hliníková ochrana proti podbehnutiu, podpery. Nástavba: Skriňový náves s rolovacou bránou, posledná náprava nútene riadená cez klín; slúžil u predchádzajúceho majiteľa ako interný náves pre výstavy (veľtrhy). Náves je momentálne v prenájme, ale je možné si ho kedykoľvek prezrieť! Údaje o príslušenstve sú bez záruky, vyhradzujeme si právo na zmeny, predbežný predaj a omyly! Klsdpfxjvhhfls Aqvst